August 2015 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sat Aug 1 04:38:22 EDT 2015
Ending: Mon Aug 31 23:23:37 EDT 2015
Messages: 768

• [PATCH] Adds support for IPv6 DNAT, SNAT, and REDIRECT   Timothy Ace
• [OpenWrt-Devel] [PATCH] [package] firewall: Adds support for IPv6 DNAT, SNAT, and REDIRECT   Timothy Ace
• [OpenWrt-Devel] Registering an ubus namespace using Lua   Ronaldo Afonso
• [OpenWrt-Devel] Registering an ubus namespace using Lua   Ronaldo Afonso
• [OpenWrt-Devel] Registering an ubus namespace using Lua   Ronaldo Afonso
• [OpenWrt-Devel] [rt3050f] A small question   Ben Agor
• [OpenWrt-Devel] Just open-sourced our OpenWrt Router test framework   Michael Anderson
• [OpenWrt-Devel] Openvswitch package not available in trunk   Alexandru Ardelean
• [OpenWrt-Devel] Openvswitch package not available in trunk   Alexandru Ardelean
• [OpenWrt-Devel] Openvswitch package not available in trunk   Alexandru Ardelean
• [OpenWrt-Devel] Openvswitch package not available in trunk   Alexandru Ardelean
• [OpenWrt-Devel] Openvswitch package not available in trunk   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 1/4] lldpd: remove obsolete/unsupported lldpctl call   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 2/4] lldpd: move /var/run creation + chmod earlier   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/4] lldpd: conversion of init script to procd format   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 4/4] lldpd: add extra respawn params   Alexandru Ardelean
• [OpenWrt-Devel] Openvswitch package not available in trunk   Alexandru Ardelean
• [OpenWrt-Devel] Using procd for USB hotplug detection   Alexandru Ardelean
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Steven Barth
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Steven Barth
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Steven Barth
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Steven Barth
• [OpenWrt-Devel] [PATCH 2/2] proto-shell: add checkup timeout to restart interface.   Steven Barth
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Steven Barth
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Steven Barth
• [OpenWrt-Devel] [PATCH] ramips: Fix Ticket #20153 swap radio calibration data pointers on the RE6500   Michael Bastian
• [OpenWrt-Devel] ar71xx: RB435G PCI does not support minipci sata module (PER-C20S)   Marek Behun
• [OpenWrt-Devel] [PATCH] CC: ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.   Christian Beier
• [OpenWrt-Devel] [PATCH] CC: ar71xx: Enable ath10k calibration data loading for EnGenius ESR1750 and EPG500.   Christian Beier
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Jonathan Bennett
• [OpenWrt-Devel] Compile kernel modules with SDK   Marcos Lois Bermúdez
• [OpenWrt-Devel] [PATCH] wpan-tools: bump to wpan-tools-0.5   Varka Bhadram
• [OpenWrt-Devel] RFC: adding 'traceroute6' to busybox / base   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] base-files: rework reset button script to indicate factory reset   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] base-files: rework reset button script to indicate factory reset   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v2] busybox: lock: implement -n "Fail rather than wait"   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] busybox: lock: implement -n "Fail rather than wait"   Bastian Bittorf
• [OpenWrt-Devel] Separate Default SSID for 2.4GHz and 5GHz   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Martin Blumenstingl
• [OpenWrt-Devel] Linux kernel config options handling in OpenWRT   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] target/linux/generic: allow up to 4 8250-compatible UARTS   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] target/linux/generic: allow up to 4 8250-compatible UARTS   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 0/3] Add support of ARC architecture   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 1/3] toolchain: add support of ARC architecture   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 2/3] ARC: specify location of output elf   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 3/3] linux: add support of Synopsys ARC boards   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 1/3] toolchain: add support of ARC architecture   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 1/3] toolchain: add support of ARC architecture   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 0/3] Add support of ARC architecture   Alexey Brodkin
• [OpenWrt-Devel] igmpproxy not auto starting on boot   Paul C
• [OpenWrt-Devel] [PATCH 1/2] [procd] add UTRACE_SUPPORT option   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH 2/2] [procd, RFC] ujail: reworks & cleanups   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH] procd: rework makefile, split ujail/seccomp   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v2 0/5] jail work   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v2 1/5] add UTRACE_SUPPORT build option   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v2 2/5] jail, seccomp: fix typo/improve log prefix   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v2 3/5] jail, seccomp: remove useless root check   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v2 4/5] ujail: reworks & cleanups   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v2 5/5] jail: add capabilities support   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH v2] procd: rework makefile, split ujail/seccomp   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 0/7] jail work   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 1/7] add UTRACE_SUPPORT build option   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 2/7] jail, seccomp: fix typo/improve log prefix   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 3/7] jail, seccomp: remove useless root check   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 4/7] jail: reworks & cleanups   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 5/7] jail: add capabilities support   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 6/7] jail: cleanup include   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH procd v3 7/7] jail: allow to not use namespaces   Etienne CHAMPETIER
• [OpenWrt-Devel] [PATCH] procd: add helper binaries to jail   Etienne Champetier
• [OpenWrt-Devel] [PATCH 2/2] [procd, RFC] ujail: reworks & cleanups   Etienne Champetier
• [OpenWrt-Devel] [PATCH procd v2 0/5] jail work   Etienne Champetier
• [OpenWrt-Devel] [PATCH procd v2 0/5] jail work   Etienne Champetier
• [OpenWrt-Devel] [PATCH] hostapd: Add vlan_file option to netifd.sh   Gong Cheng
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Baptiste Clenet
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Baptiste Clenet
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Baptiste Clenet
• [OpenWrt-Devel] getaddrinfo breaks with IPV6 and IPV4   Baptiste Clenet
• [OpenWrt-Devel] getaddrinfo breaks with IPV6 and IPV4   Baptiste Clenet
• [OpenWrt-Devel] getaddrinfo breaks with IPV6 and IPV4   Baptiste Clenet
• [OpenWrt-Devel] Mount mmc block   Baptiste Clenet
• [OpenWrt-Devel] Mount mmc block   Baptiste Clenet
• [OpenWrt-Devel] Mount mmc block   Baptiste Clenet
• [OpenWrt-Devel] [PATCH] wpan-tools: bump to wpan-tools-0.5   Baptiste Clenet
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Alexander Couzens
• [OpenWrt-Devel] [PATCH] ustream-ssl: make ustream_ssl.server_name const   Alexander Couzens
• [OpenWrt-Devel] [PATCH] uclient-fetch: set server_name of the ssl context to support SNI   Alexander Couzens
• [OpenWrt-Devel] [PATCH] busybox: lock: implement -n "Fail rather than wait"   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2] busybox: lock: implement -n "Fail rather than wait"   Alexander Couzens
• [OpenWrt-Devel] [PATCH v3] busybox: lock: implement -n "Fail rather than wait"   Alexander Couzens
• [OpenWrt-Devel] [PATCH] uci: add import call   Alexander Couzens
• [OpenWrt-Devel] [PATCH] uci: add import call   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/1] [buildroot] Fix for liblzma breaks redhat-like systems   John Crispin
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   John Crispin
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   John Crispin
• [OpenWrt-Devel] [PATCH] iwinfo: do not wait for scan results if scan request failed.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex DB-WRT01   John Crispin
• [OpenWrt-Devel] [PATCH] [libubox] ulog: check if /dev/kmsg is special file   John Crispin
• [OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   John Crispin
• [OpenWrt-Devel] [PATCH] [libubox] ulog: check if /dev/kmsg is special file   John Crispin
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   John Crispin
• [OpenWrt-Devel] [PATCH v2] AR71xx: Add Minibox V1.0 support   John Crispin
• [OpenWrt-Devel] [PATCH v2] AR71xx: Add Minibox V1.0 support   John Crispin
• [OpenWrt-Devel] [PATCH] iwinfo: do not wait for scan results if scan request failed.   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: Add UBNT airGateway Pro support   John Crispin
• [OpenWrt-Devel] [PATCH v3] Add Minibox v1.0 support   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] include: add a new ubinize-image build target   John Crispin
• [OpenWrt-Devel] [PATCH RFC 10/10] ipq806x: wrap ubi in itb   John Crispin
• [OpenWrt-Devel] [PATCH RFC 10/10] ipq806x: wrap ubi in itb   John Crispin
• [OpenWrt-Devel] [PATCH procd v2 0/5] jail work   John Crispin
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   John Crispin
• [OpenWrt-Devel] [PATCH] malta: disable mips16   John Crispin
• [OpenWrt-Devel] [PATCH] malta: disable mips16   John Crispin
• [OpenWrt-Devel] [PATCH procd v2 0/5] jail work   John Crispin
• [OpenWrt-Devel] [PATCH procd v2 0/5] jail work   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] toolchain: add support of ARC architecture   John Crispin
• [OpenWrt-Devel] [PATCH 3/3] linux: add support of Synopsys ARC boards   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] toolchain: add support of ARC architecture   John Crispin
• [OpenWrt-Devel] [PATCH] [package] firewall: Remove src_port from firewall.config to receive dhcpv6 replies   John Crispin
• [OpenWrt-Devel] Registering an ubus namespace using Lua   John Crispin
• [OpenWrt-Devel] Using procd for USB hotplug detection   John Crispin
• [OpenWrt-Devel] [PATCH] [SIGNED-OFF] Add WeIO board (http://we-io.net) profile. This patch adds support for WeIO board, which is based on Carambola2 board from 8Devices.   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH] Add WeIO board (http://we-io.net) profile. This patch adds support for WeIO board, which is based on Carambola2 board from 8Devices.   Drasko DRASKOVIC
• [OpenWrt-Devel] [PATCH] dnsmasq: Bump to dnsmasq2.75   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] dnsmasq: dns rebind protection improvements   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] samba36: preserve smbpasswd across sysupgrade   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH 1/4] netifd: Fix SEG fault when device cannot be allocated   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/4] netifd: Fix device usage after free   Hans Dedecker
• [OpenWrt-Devel] [PATCH 3/4] netifd: Remove obsolete device_set_present in device_replace   Hans Dedecker
• [OpenWrt-Devel] [PATCH 4/4] netifd: Spawn device events when registering dependency in device_replace   Hans Dedecker
• [OpenWrt-Devel] [PATCH] [netifd] enable MULTICAST on GRE   Hans Dedecker
• [OpenWrt-Devel] [PATCH] [netifd] enable MULTICAST on GRE   Hans Dedecker
• [OpenWrt-Devel] i get no image for TL-WA7510   Sławomir Demeszko
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Sławomir Demeszko
• [OpenWrt-Devel] Using procd for USB hotplug detection   Lazar Demin
• [OpenWrt-Devel] [PATCH 1/9] CC PowerCloud CAP324 Kernel BSP   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 2/9] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [PATCH 1/8] CC PowerCloud CAP324 Image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 3/9] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [PATCH 2/8] CC PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 4/9] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [PATCH 3/8] CC PowerCloud CR3000 Kernel BSP   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 5/9] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [PATCH 4/8] CC PowerCloud CR3000 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 6/9] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [PATCH 5/8] CC PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 7/9] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [PATCH 6/8] CC PowerCloud CR5000 Kernel BSP   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 8/9] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [PATCH 7/8] CC PowerCloud CR5000 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 9/9] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [PATCH 8/8] CC PowerCloud CR5000 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] sysupgrade, wndr3700/wndr3800: Add allnet safety check   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [polarssl] Fix build failures due to PKG_NAME != dir name   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [kernel] Fix kmod-v4l2 modules have missing symbols due to lack of clk support   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [buildroot] Fix for liblzma breaks redhat-like systems   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [polarssl] Fix build failures due to PKG_NAME != dir name   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/9] Resolved email/series creation issues: PowerCloud device support   Daniel Dickinson
• [OpenWrt-Devel] Mailman configuration issue?   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [polarssl] Fix build failures due to PKG_NAME != dir name   Daniel Dickinson
• [OpenWrt-Devel] Please ignore until rework (was Re: [PATCH 0/9] Resolved email/series creation issues: PowerCloud device support)   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [buildroot] Fix for liblzma breaks redhat-like systems   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [polarssl] Fix build failures due to PKG_NAME != dir name   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [kernel] Fix kmod-v4l2 modules have missing symbols due to lack of clk support   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] [buildroot] Fix for liblzma breaks redhat-like systems   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/8] Add support for three PowerCloud Systems devices   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/9] ar71xx: PowerCloud CAP324 kernel support   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 2/9] ar71xx: PowerCloud CAP324 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 3/9] ar71xx: PowerCloud CAP324 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 4/9] ar71xx: PowerCloud CR3000 kernel support   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 5/9] ar71xx: PowerCloud CR3000 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 6/9] ar71xx: PowerCloud CR3000 OpenWrt configuration   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 7/9] ar71xx: PowerCloud CR5000 kernel support   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 8/9] ar71xx: PowerCloud CR5000 image generation   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 9/9] ar71xx: PowerCloud CR5000 openwrt configuration   Daniel Dickinson
• [OpenWrt-Devel] Mailling list issues?   Daniel Dickinson
• [OpenWrt-Devel] Mailling list issues?   Daniel Dickinson
• [OpenWrt-Devel] CC: grub2 disable stack protector   Daniel Dickinson
• [OpenWrt-Devel] CC: grub2 disable stack protector   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Sedat Dilek
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   Donk
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 01/25] ramips: fix indentation and other mistakes in .dts{, i} files   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 02/25] ramips: fix Zbtlink ZBT-WR8305RT board name   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 03/25] ramips: fix Asus WL-330N{, 3G} boards names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 04/25] ramips: fix Asus RP-N53 and Lenovo Y1{, S} image names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 05/25] ramips: fix Xiaomi MiWiFi Mini board, image and profile names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 06/25] ramips: fix UPVEL model names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 07/25] ramips: fix Asus RT-N56U dts filename   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 08/25] ramips: fix Belkin F7C027 image name   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 09/25] ramips: fix Argus ATP-52B board and image names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 10/25] ramips: fix Sitecom WL-341v3 board and image names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 11/25] ramips: fix Olimex models, images and profiles names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 12/25] ramips: fix Aigale Ai-BR100 dts and profile names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 13/25] ramips: fix Tenda W150M model name   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 14/25] ramips: fix Edimax BR-6425 board name   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 15/25] ramips: fix Omnima models, images and profiles names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 16/25] ramips: fix Buffalo WMR-300 dts, board, image and profile names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 17/25] ramips: fix 7Links PX-4885 dts{, i}, board, image and profile names   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 18/25] ramips: remove old code for Edimax BR-6524N   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 19/25] ramips: fix various mistakes in subtargets *.mk profiles   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 20/25] ramips: remove leading spaces, sort boards and optimize base-files/lib/ramips.sh   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 21/25] ramips: be consistent with case statement in base-files/lib/upgrade/platform.sh   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 22/25] ramips: fix indentation, case statements structure and optimize base-files/etc/board.d/02_network   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 23/25] ramips: remove unnecessary LED declaration for WT1520 in diag.sh   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 24/25] ramips: use consistent naming scheme for LEDs   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 25/25] ramips: base-files: optimize etc/diag.sh and etc/board.d/01_leds scripts   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2] ramips: add support for Planex DB-WRT01   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] [package] Properly enable 802.11w support in hostapd   Janusz Dziemidowicz
• [OpenWrt-Devel] [PATCH] [package] firewall: Remove src_port from firewall.config to receive dhcpv6 replies   Anselm Eberhardt
• [OpenWrt-Devel] [PATCH] [package] firewall: Remove src_port from firewall.config to receive dhcpv6 replies   Anselm Eberhardt
• [OpenWrt-Devel] [PATCH 1/8] ar71xx: add kernel support for the OpenMesh MR1750 board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/8] ar71xx: add user-space support for the OpenMesh MR1750 board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 3/8] scripts/om-fwupgradecfg-gen.sh: add support for the MR1750   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 4/8] ar71xx: enable sysupgrade for the OpenMesh MR1750   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 5/8] package/om-watchdog: add OpenMesh MR1750 support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 6/8] package/uboot-envtools: add OpenMesh MR1750 support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 7/8] ar71xx: create profile and build image for the OpenMesh MR1750 board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 8/8] ar71xx: extract ath10k wifi board.bin for the OpenMesh MR1750 board   Sven Eckelmann
• [OpenWrt-Devel] Fwd: [PATCH v3] lantiq: get more status information from xDSL   Florian Eckert
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Florian Eckert
• [OpenWrt-Devel] [PATCH] [iwinfo] nl80211: fix not terminated string in get_countrylist   Alejandro Enrique
• [OpenWrt-Devel] [PATCH] target: ar71xx: add support for Comfast CF-E316N v2 board   Paul Fertser
• [OpenWrt-Devel] [PATCH] nls.mk: add -rpath-link when needed for NLS support   Paul Fertser
• [OpenWrt-Devel] RFC: adding 'traceroute6' to busybox / base   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Felix Fietkau
• [OpenWrt-Devel] [PATCH 3/4] ipq806x: fix pcie pinmux naming in ipq806x dts   Felix Fietkau
• [OpenWrt-Devel] [PATCHv2 netifd 1/3] bridge: Fix multicast_to_unicast feature by hairpin+isolate   Felix Fietkau
• [OpenWrt-Devel] [PATCHv2 netifd 2/3] bridge: Allow setting multicast_to_unicast option   Felix Fietkau
• [OpenWrt-Devel] [PATCHv2 netifd 3/3] bridge: Allow setting multicast_router option   Felix Fietkau
• [OpenWrt-Devel] [PATCH] busybox: lock: implement -n "Fail rather than wait"   Felix Fietkau
• [OpenWrt-Devel] [PATCHv2 netifd 2/3] bridge: Allow setting multicast_to_unicast option   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/3] ipq806x: add NAND flash support   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/3] ipq806x: add NAND flash support   Felix Fietkau
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging"   Felix Fietkau
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging"   Felix Fietkau
• [OpenWrt-Devel] [PATCHv3 netifd 3/3] bridge: Allow setting multicast_router option   Felix Fietkau
• [OpenWrt-Devel] [PATCHv3 openwrt 2/2] kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()   Felix Fietkau
• [OpenWrt-Devel] [musl] SuperH conflict of arch/sh/__set_thread_area vs thread/__set_thread_area   Felix Fietkau
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Felix Fietkau
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Felix Fietkau
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Felix Fietkau
• [OpenWrt-Devel] ubus: potential regression in request processing   Felix Fietkau
• [OpenWrt-Devel] Change realtime graphs interval   Fernando Frediani
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Setting password on serial console + disabling linux single user mode   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Setting password on serial console   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] [PATCH 1/3] tools/firmware-utils: add header version 2 support for mktplinkfw   Weijie Gao
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: add 64kb bootloader mtd parser for tplinkpart   Weijie Gao
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add support for TP-Link TL-WDR6500 v2   Weijie Gao
• [OpenWrt-Devel] [PATCH] kmod-crypto-manager: autoload aead module   Doug Goldstein
• [OpenWrt-Devel] [PATCH] kernel: update 4.1 to 4.1.4   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: remove support for kernel 3.18 and 4.0   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: update 4.1 to 4.1.4   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/3] ipq806x: Add ADM support   Jonas Gorski
• [OpenWrt-Devel] [PATCH v2] busybox: lock: implement -n "Fail rather than wait"   Jonas Gorski
• [OpenWrt-Devel] lighttpd 1.4.36 and file descriptors limit issue - OpenWrt related?   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/9] CC PowerCloud CAP324 Kernel BSP   Jonas Gorski
• [OpenWrt-Devel] [PATCH 7/9] CC PowerCloud CR5000 Kernel BSP   Jonas Gorski
• [OpenWrt-Devel] [PATCH] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Jonas Gorski
• [OpenWrt-Devel] Broken GCC 4.9 (and 5.2) on ARM - asking for review/test   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/2] include: add a new ubinize-image build target   Jonas Gorski
• [OpenWrt-Devel] [PATCH 00/10] ipq806x: implement sysupgrade for AP148   Jonas Gorski
• [OpenWrt-Devel] [PATCH 01/10] ipq806x: enable ubiblock support   Jonas Gorski
• [OpenWrt-Devel] [PATCH 02/10] image: add a build step for building and appending an ubinized rootfs   Jonas Gorski
• [OpenWrt-Devel] [PATCH 03/10] build: add a build step for generic sysupgrade nand image   Jonas Gorski
• [OpenWrt-Devel] [PATCH 04/10] ipq806x: enable smem-parser for nand on AP148   Jonas Gorski
• [OpenWrt-Devel] [PATCH 05/10] ipq806x: rename "rootfs" to "ubi" on nand   Jonas Gorski
• [OpenWrt-Devel] [PATCH 06/10] ipq806x: wrap legacy image in uImage   Jonas Gorski
• [OpenWrt-Devel] [PATCH 07/10] ipq806x: clear IMAGES for devices   Jonas Gorski
• [OpenWrt-Devel] [PATCH 08/10] ipq806x: build images and add sysupgrade support for AP148   Jonas Gorski
• [OpenWrt-Devel] [PATCH RFC 09/10] image: add a build recipe to wrap an ubi image in a itb file   Jonas Gorski
• [OpenWrt-Devel] [PATCH RFC 10/10] ipq806x: wrap ubi in itb   Jonas Gorski
• [OpenWrt-Devel] [PATCH RFC 10/10] ipq806x: wrap ubi in itb   Jonas Gorski
• [OpenWrt-Devel] [PATCH RFC 10/10] ipq806x: wrap ubi in itb   Jonas Gorski
• [OpenWrt-Devel] [PATCH 0/7] ipq806x: add support for Netgear Nighthawk X4 R7500   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/7] ar71xx: rename NETGEAR_ variables to their netgear names   Jonas Gorski
• [OpenWrt-Devel] [PATCH 2/7] image: move netgear-image to top and rename to -dni   Jonas Gorski
• [OpenWrt-Devel] [PATCH 3/7] image: allow exactly KERNEL_SIZE sized kernels   Jonas Gorski
• [OpenWrt-Devel] [PATCH 4/7] ipq806x: add support for retrieving macs from mtd   Jonas Gorski
• [OpenWrt-Devel] [PATCH 5/7] base-files: allow setting ide-disk led trigger   Jonas Gorski
• [OpenWrt-Devel] [PATCH 6/7] ipq806x: enable ide led trigger   Jonas Gorski
• [OpenWrt-Devel] [PATCH 7/7] ipq806x: add support for Netgear Nighthawk X4 R7500   Jonas Gorski
• [OpenWrt-Devel] [PATCH 6/7] mac80211: cosmetic changes   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/3] mvebu: also copy nor initramfs kernels to bin   Jonas Gorski
• [OpenWrt-Devel] [PATCH 2/3] kernel: package up sdhci-pxav3   Jonas Gorski
• [OpenWrt-Devel] [PATCH 3/3] mvebu: Add Armada 388 General Purpose Development Board support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3026e support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3026e support   Jonas Gorski
• [OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support   Jonas Gorski
• [OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] include/image.mk: make tar reproducible   Jonas Gorski
• [OpenWrt-Devel] [PATCH v4 1/4] sunxi: don't copy DTS files to BIN_DIR   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH v2] lantiq: get more status information from xDSL   Andre Heider
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Andre Heider
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Michael Heimpold
• [OpenWrt-Devel] [PATCH 0/5] packages: uboot-mxs: various fixes   Michael Heimpold
• [OpenWrt-Devel] [PATCH 1/5] packages: uboot-mxs: place binaries in the designated path   Michael Heimpold
• [OpenWrt-Devel] [PATCH 2/5] packages: uboot-mxs: do no modify the U-Boot image, copy as-is   Michael Heimpold
• [OpenWrt-Devel] [PATCH 3/5] packages: uboot-mxs: bless UBOOT_IMAGE with a meaning, otherwise we could drop this C&P left-over   Michael Heimpold
• [OpenWrt-Devel] [PATCH 4/5] target/mxs: adopt SD card generation to fixed U-Boot path   Michael Heimpold
• [OpenWrt-Devel] [PATCH 5/5] packages: uboot-mxs: fix I2SE Duckbill variant   Michael Heimpold
• [OpenWrt-Devel] [PATCH] base-files: rework reset button script to indicate factory reset   Stefan Hellermann
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Ted Hess
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Ted Hess
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Ted Hess
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Ted Hess
• [OpenWrt-Devel] [PATCH] nls.mk: add -rpath-link when needed   Ted Hess
• [OpenWrt-Devel] Release of RegMon - a fast in-kernel phy/mac dmonitoring tool for QCA/Atheros WiFi cards   Thomas Hühn
• [OpenWrt-Devel] [PATCH] iwinfo: do not wait for scan results if scan request failed.   Dmitrijs Ivanovs
• [OpenWrt-Devel] [PATCH 0/3] ipq806x: add NAND flash support   Imre Kaloz
• [OpenWrt-Devel] [PATCH v3 2/3] mcs814x: fix interrupts   Guenther Kelleter
• [OpenWrt-Devel] [PATCH v4 0/3] fix mcs814x dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 1/3] mcs814x: fix debug UART   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 2/3] mcs814x: fix interrupt handling   Günther Kelleter
• [OpenWrt-Devel] [PATCH v4 3/3] mcs814x: use firmware partition splitter on dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 0/3] Backport dLAN USB extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 1/3] mcs814x: fix debug UART   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 2/3] mcs814x: fix interrupt handling   Günther Kelleter
• [OpenWrt-Devel] [PATCH CC 3/3] mcs814x: use firmware partition splitter on dLAN USB Extender   Günther Kelleter
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH] [libubox] ulog: check if /dev/kmsg is special file   Sergiy Kibrik
• [OpenWrt-Devel] [PATCH] [libubox] ulog: check if /dev/kmsg is special file   Sergiy Kibrik
• [OpenWrt-Devel] [PATCH v2] [libubox] ulog: avoid accidental /dev/kmsg creation   Sergiy Kibrik
• [OpenWrt-Devel] [PATCH] [procd] inittab: always proceed to next state   Sergiy Kibrik
• [OpenWrt-Devel] [PATCH] extra configuration options for OpenVPN in init script   François Kooman
• [OpenWrt-Devel] [PATCH] iwinfo: report additional data for stations   Jernej Kos
• [OpenWrt-Devel] TP-Link v3 header format description   Mathias Kresin
• [OpenWrt-Devel] TP-Link v3 header format description   Mathias Kresin
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Mathias Kresin
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Adam Kuklycz
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Adam Kuklycz
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Adam Kuklycz
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Adam Kuklycz
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: add support of uClibc-ng   Adam Kuklycz
• [OpenWrt-Devel] [CC 15.05-rc3] mwan3: Update   Adam Kuklycz
• [OpenWrt-Devel] ubus: potential regression in request processing   Zefir Kurtisi
• [OpenWrt-Devel] ubus: potential regression in request processing   Zefir Kurtisi
• [OpenWrt-Devel] [musl] SuperH conflict of arch/sh/__set_thread_area vs thread/__set_thread_area   Christian Lamparter
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   David Lang
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging"   David Lang
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   David Lang
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   Lars
• [OpenWrt-Devel] [PATCH V2] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Claudio Leite
• [OpenWrt-Devel] [PATCH V2] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Claudio Leite
• [OpenWrt-Devel] [PATCH 1/2] mvsw61xx: use standard swconfig get_port_link   Claudio Leite
• [OpenWrt-Devel] [PATCH 2/2] mvsw61xx: match swconfig function names   Claudio Leite
• [OpenWrt-Devel] [PATCH v2] mvsw61xx: use standard swconfig get_port_link   Claudio Leite
• [OpenWrt-Devel] PATCH two patches for the AP121 reference board (ar9331)   Attila Lendvai
• [OpenWrt-Devel] [PATCH] Restore buildability of the AP121 target   Attila Lendvai
• [OpenWrt-Devel] [PATCH] AP121 target: fix board detection in ar71xx.sh   Attila Lendvai
• [OpenWrt-Devel] [PATCH] build: fixes feeds with Makefile in root directory (#20392)   Ryan Lindeman
• [OpenWrt-Devel] Recommended settings ip6 DNS server / dnsmasq   Stefan Lippers-Hollmann
• [OpenWrt-Devel] [PATCHv2] Fixes regarding bridge multicast-to-unicast feature   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 netifd 1/3] bridge: Fix multicast_to_unicast feature by hairpin+isolate   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 netifd 2/3] bridge: Allow setting multicast_to_unicast option   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 netifd 3/3] bridge: Allow setting multicast_router option   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 openwrt 1/3] hostapd: Always isolate if brport->multicast_to_unicast is enabled   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 openwrt 2/3] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 openwrt 3/3] kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 netifd 1/3] bridge: Fix multicast_to_unicast feature by hairpin+isolate   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 netifd 2/3] bridge: Allow setting multicast_to_unicast option   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 netifd 2/3] bridge: Allow setting multicast_to_unicast option   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3] Fixes regarding bridge multicast-to-unicast feature   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 netifd 1/3] bridge: Fix multicast_to_unicast feature by hairpin+isolate   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 netifd 2/3] bridge: Allow setting multicast_to_unicast option   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 netifd 3/3] bridge: Allow setting multicast_router option   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 2/2] kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv3 openwrt 1/2] Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"   Linus Lüssing
• [OpenWrt-Devel] [PATCHv2 5/7] mac80211/linux-firmware: include firmware for brcmfmac-sdio   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/1] [kernel] Fix kmod-v4l2 modules have missing symbols due to lack of clk support   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] kmod-crypto-manager: autoload aead module   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/1] [buildroot] Fix for liblzma breaks redhat-like systems   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/5] kernel: move linux, part-probe dt parsing in generic code   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH][procd] fix generating syscall-names.h   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2] mac80211: add mt7601u driver   Hauke Mehrtens
• [OpenWrt-Devel] Linux kernel config options handling in OpenWRT   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/1] [kernel] Fix kmod-v4l2 modules have missing symbols due to lack of clk support   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 1/1] [kernel] Fix kmod-v4l2 modules have missing symbols due to lack of clk support   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 4/7] mac80211: refresh Intel firmware   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] target/linux/generic: allow up to 4 8250-compatible UARTS   Hauke Mehrtens
• [OpenWrt-Devel] [PATCHv2 5/7] mac80211/linux-firmware: include firmware for brcmfmac-sdio   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2] busybox: lock: implement -n "Fail rather than wait"   Rafał Miłecki
• [OpenWrt-Devel] Netgear R7000 tester needed (serial console recommended)   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] base-files: rework reset button script to indicate factory reset   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] base-files: rework reset button script to indicate factory reset   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/5] kernel: move linux, part-probe dt parsing in generic code   Rafał Miłecki
• [OpenWrt-Devel] lighttpd 1.4.36 and file descriptors limit issue - OpenWrt related?   Rafał Miłecki
• [OpenWrt-Devel] lighttpd 1.4.36 and file descriptors limit issue - OpenWrt related?   Rafał Miłecki
• [OpenWrt-Devel] [PATCH packages] lighttpd: backport a fix for running out of filedescriptors   Rafał Miłecki
• [OpenWrt-Devel] [PATCH packages] lighttpd: backport a fix for running out of filedescriptors   Rafał Miłecki
• [OpenWrt-Devel] [PATCH packages] lighttpd: backport a fix for running out of filedescriptors   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] uci: add import call   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 14.07][RFC] dnsmasq: backport CVE-2015-3294 security fix   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V2] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Bjørn Mork
• [OpenWrt-Devel] [PATCH] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Rob Mosher
• [OpenWrt-Devel] [PATCH] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Rob Mosher
• [OpenWrt-Devel] [PATCH V2] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Rob Mosher
• [OpenWrt-Devel] [PATCH V2] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Rob Mosher
• [OpenWrt-Devel] [PATCH V2] Fix for mvebu (WRT1900AC/WRT1200AC/etc) boot counter   Rob Mosher
• [OpenWrt-Devel] [PATCH] mvebu: enable auto recovery all the time   Rob Mosher
• [OpenWrt-Devel] [PATCH] ramips: enable external amplifier for Xiaomi MiWiFi Mini   D. Andrei Măceș
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   N.Leiten
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   N.Leiten
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] mac80211: add mt7601u driver   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH v2] mac80211: add mt7601u driver   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH v3] mac80211: add mt7601u driver   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] enable strong SSP / Stackprotector on gcc5   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] generic: crypto: remove IRQF_DISABLED   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] orion: remove IRQF_DISABLED   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] rules.mk : remove GCC 4.4 and GCC 4.5 conditional   Dirk Neukirchen
• [OpenWrt-Devel] Mount mmc block   Dirk Neukirchen
• [OpenWrt-Devel] Broken GCC 4.9 (and 5.2) on ARM - asking for review/test   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 0/7] mac80211 experimental extensions and cleanup   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/7] mac80211: iwlagn: enable iwlmvm   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/7] mac80211: rt2800-usb: enable "unknown" USB IDs   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 3/7] mac80211: update linux-firmware to 2014-07-14   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 4/7] mac80211: refresh Intel firmware   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 5/7] mac80211: add iwlagn debug options   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 7/7] mac80211: rename iwlagn to iwlwifi   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 6/7] mac80211: cosmetic changes   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] kernel: arm64: psci: move psci firmware calls out of line   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 4/8 v2] mac80211: refresh Intel firmware   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/2 v2] mac80211: cleanup remove net prefixes   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/2 v2] mac80211: cosmetic changes   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 4/7] mac80211: refresh Intel firmware   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/2] realview: enable sd card support   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/2] realview: create sd card image for qemu   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] malta: disable mips16   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] malta: disable mips16   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] yaffs2: remove __TIME__ __DATE__ macros   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] include/image.mk: make tar reproducible   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] openvpn: remove __DATE__ from options output   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] ipkg-build: add ogargs to outer tar/ipk   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] include/image.mk: make tar reproducible   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] ugps: fix filename to eliminate build problems   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] opkg: Extend 'opkg list' command to optionally display package size   Hannu Nyman
• [OpenWrt-Devel] [PATCH 2/2] tools/quilt: fix build error during kernel_menuconfig on a cleaned env   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/4] ipq806x: update bleeding-edge kernel from 4.0 to 4.1   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/4] ipq806x: add support for non-dt enabled ap148 bootloader   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/4] ipq806x: fix pcie pinmux naming in ipq806x dts   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 4/4] ipq806x: fix freeze in PCIe code when booting with an old u-boot   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/2] ipq806x: refresh kernel configs   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/2] ipq806x: add ethernet (stmmac) support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/4] ipq806x: fix pcie pinmux naming in ipq806x dts   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/2] Fix quilt error when $STAGING_DIR doesn't exist yet   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/2] rules.mk: export STAGING_DIR_HOST to sub-makefiles and shells   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/2] tools/quilt: fix build error during kernel_menuconfig on a cleaned env   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] scripts: add a new patch-rename.sh script   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/3] ipq806x: add NAND flash support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/3] ipq806x: Add ADM support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/3] ipq806x: add NAND flash controller support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/3] ipq806x: enable NAND flash support in the kernel   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/3] ipq806x: add NAND flash support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] ipq806x: disable DMA on the SPI flash   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/5] ipq806x: add support for SMEM based MTD parser   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/5] kernel: move linux, part-probe dt parsing in generic code   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/5] ipq806x: add hwspinlock support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/5] ipq806x: add SMEM support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 4/5] ipq806x: add QCOM SMEM based MTD parser   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 5/5] ipq806x: switch AP148 to using SMEM based MTD parser   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/5] kernel: move linux, part-probe dt parsing in generic code   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/5] ipq806x: add support for SMEM based MTD parser   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/5] kernel: move linux, part-probe dt parsing in generic code   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/5] ipq806x: add hwspinlock support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/5] ipq806x: add SMEM support   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 4/5] ipq806x: add QCOM SMEM based MTD parser   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 5/5] ipq806x: switch AP148 to using SMEM based MTD parser   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/2] include: add a new ubinize-image build target   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/2] ipq806x: add UBI image generation   Mathieu Olivari
• [OpenWrt-Devel] RFC: adding 'traceroute6' to busybox / base   Sami Olmari
• [OpenWrt-Devel] Separate Default SSID for 2.4GHz and 5GHz   Sami Olmari
• [OpenWrt-Devel] [PATCH] [SIGNED-OFF] Add WeIO board (http://we-io.net) profile. This patch adds support for WeIO board, which is based on Carambola2 board from 8Devices.   Karl Palsson
• [OpenWrt-Devel] [PATCH] [kernel] cp201x: Add GPIO ioctl commands (from Silicon Labs)   Karl Palsson
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Karl Palsson
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Karl Palsson
• [OpenWrt-Devel] [PATCH 1/2] lua: use pkg-config built in module to search for alternatives   Karl Palsson
• [OpenWrt-Devel] [PATCH v2] AR71xx: Add Minibox V1.0 support   Karl Palsson
• [OpenWrt-Devel] [PATCH v2] AR71xx: Add Minibox V1.0 support   Karl Palsson
• [OpenWrt-Devel] [PATCH v3] Add Minibox v1.0 support   Karl Palsson
• [OpenWrt-Devel] RB2011UiAS-RM Mikrotik/Routerboard   Marcelo Feitoza Parisi
• [OpenWrt-Devel] Ubiquiti NanoBeam M2 400 working with 15.03-rc3   Bruce Perens
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Sylwester Petela
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Sylwester Petela
• [OpenWrt-Devel] [PATCH packages] lighttpd: backport a fix for running out of filedescriptors   W. Michael Petullo
• [OpenWrt-Devel] GRE and multicast in netifd   Nick Podolak
• [OpenWrt-Devel] [PATCH] [netifd] enable MULTICAST on GRE   Nick Podolak
• [OpenWrt-Devel] [PATCH] [netifd] enable MULTICAST on GRE   Nick Podolak
• [OpenWrt-Devel] Separate Default SSID for 2.4GHz and 5GHz   Afkar Rafique
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for Black Swift   Bruno Randolf
• [OpenWrt-Devel] [PATCH] CC: ar71xx: Add support for Black Swift   Bruno Randolf
• [OpenWrt-Devel] Request for Support for namespaces in uci and netifd   Ashok Rao
• [OpenWrt-Devel] [PATCH] ar71xx: Add UBNT airGateway Pro support   Matthew Reeve
• [OpenWrt-Devel] [PATCH v2] ar71xx: Add UBNT airGateway Pro support   Matthew Reeve
• [OpenWrt-Devel] Raspberry Pi 2 buildbot (brcm2708/bcm2709)   Álvaro Fernández Rojas
• [OpenWrt-Devel] Multiple Wi-Fi client/AP interfaces on one radio (was: Change OpenWrt Wifi default settings)   Joshua Judson Rosen
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   Joshua Judson Rosen
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   Sylwek ScApi
• [OpenWrt-Devel] [PATCH 1/2] sunxi: fix uboot install location   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WR941ND v6 support   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WR941ND v6 support   Matthias Schiffer
• [OpenWrt-Devel] Unable to get TP9343/QCA9561 WLAN working with ath9k (was: ar71xx: fix TP-LINK TL-WR941ND v6 support)   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] base-files: default_postinst: propagate the real postinst return code   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v4 1/4] sunxi: don't copy DTS files to BIN_DIR   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v4 2/4] sunxi: fix uboot install location   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v4 3/4] sunxi: create KDIR_TMP, build boot.img in it   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v4 4/4] sunxi: respect CONFIG_TARGET_IMAGES_GZIP   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 0/2] Avoid unnecessary libopenssl build dependencies   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 1/2] opkg: work around unconditional libopenssl build dependency   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/2] hostapd: work around unconditional libopenssl build dependency   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] [package] base-files: sysupgrade: quote source image name   Adrien Schildknecht
• [OpenWrt-Devel] OpenWrt Summit Submission Deadline change   Eric Schultz
• [OpenWrt-Devel] FCC Wifi regulation list   Eric Schultz
• [OpenWrt-Devel] OpenWrt Summit Session Deadline - this FRIDAY, August 28   Eric Schultz
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH] Ar71xx: Add Minibox v1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH v2] AR71xx: Add Minibox V1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH v3] Add Minibox v1.0 support   Stijn Segers
• [OpenWrt-Devel] [PATCH 0/2] uqmi: Improve ipv6 connectivity   Antti Seppälä
• [OpenWrt-Devel] [PATCH 1/2] uqmi: Add IP family selection command-line switch   Antti Seppälä
• [OpenWrt-Devel] [PATCH 2/2] uqmi: Add get-current-settings command-line switch   Antti Seppälä
• [OpenWrt-Devel] [PATCH v2 0/2] uqmi: Improve ipv6 connectivity   Antti Seppälä
• [OpenWrt-Devel] [PATCH v2 1/2] uqmi: Add IP family selection command-line switch   Antti Seppälä
• [OpenWrt-Devel] [PATCH v2 2/2] uqmi: Add get-current-settings command-line switch   Antti Seppälä
• [OpenWrt-Devel] [PATCH 0/4] lantiq: AR9 platform USB DWC2 support   Antti Seppälä
• [OpenWrt-Devel] [PATCH 1/4] lantiq: Initialize USB on AR9 platform   Antti Seppälä
• [OpenWrt-Devel] [PATCH 2/4] lantiq: Introduce DWC2 compatible DTS definitions for AR9 USB   Antti Seppälä
• [OpenWrt-Devel] [PATCH 3/4] lantiq: Add AR9 compatibility bits to DWC2 driver   Antti Seppälä
• [OpenWrt-Devel] [PATCH 4/4] dwc2: Add missing config symbol definition   Antti Seppälä
• [OpenWrt-Devel] Openvswitch package not available in trunk   Florian Siebertz
• [OpenWrt-Devel] Openvswitch package not available in trunk   Florian Siebertz
• [OpenWrt-Devel] Openvswitch package not available in trunk   Florian Siebertz
• [OpenWrt-Devel] [PATCH v2] ramips: add support for Planex DB-WRT01   Tochiro SrcHack
• [OpenWrt-Devel] `git tag` and releases   Geert Stappers
• [OpenWrt-Devel] issues with service jailing   Maxim Storchak
• [OpenWrt-Devel] [PATCH] procd: add helper binaries to jail   Maxim Storchak
• [OpenWrt-Devel] Broken GCC 4.9 (and 5.2) on ARM - asking for review/test   John Szakmeister
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3026e support   Martin Tesar
• [OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support   Martin Tesar
• [OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support   Martin Tesar
• [OpenWrt-Devel] [PATCH v3] bcm63xx: add Comtrend VR-3026e support   Martin Tesar
• [OpenWrt-Devel] [PATCH v4] bcm63xx: add Comtrend VR-3026e support   Martin Tesar
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3026e support   Martin Tesař
• [OpenWrt-Devel] [OpenWrt] 2.4Ghz limited to 50mW in DFS-ETSI   Nicola von Thadden
• [OpenWrt-Devel] MT7621 board (512MB) high memory relevant issue.   Tymon
• [OpenWrt-Devel] getaddrinfo breaks with IPV6 and IPV4   Cristian Morales Vega
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   Weedy
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   Weedy
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   Weedy
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   Weedy
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   Weedy
• [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [OpenWrt-Devel] Setting password on serial console   Tobias Welz
• [OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [OpenWrt-Devel] [PATCH] ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [OpenWrt-Devel] [PATCH] ramips: Added WIZnet WizFi630A Platform based on Ralink RT5350   Tobias Welz
• [OpenWrt-Devel] [PATCH] [kernel] at91: Backport determine_rate prototype fix   Ben Whitten
• [OpenWrt-Devel] [PATCH] [kernel] at91: fix usb rate backport patch tab mangle   Ben Whitten
• [OpenWrt-Devel] ar71xx: RB435G PCI does not support minipci sata module (PER-C20S)   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] Restore AP scan patch   Roman Yeryomin
• [OpenWrt-Devel] Multiple Wi-Fi client/AP interfaces on one radio (was: Change OpenWrt Wifi default settings)   Roman Yeryomin
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex DB-WRT01   YuheiOKAWA
• [OpenWrt-Devel] [PATCH v2] ramips: add support for Planex DB-WRT01   YuheiOKAWA
• [OpenWrt-Devel] [PATCH v3] ramips: add support for Planex DB-WRT01   YuheiOKAWA
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Yousong Zhou
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Yousong Zhou
• [OpenWrt-Devel] package libcoap for OpenWRT, Makefile   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/1] [polarssl] Fix build failures due to PKG_NAME != dir name   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/1] [polarssl] Fix build failures due to PKG_NAME != dir name   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/2] Changes for more readability.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/2] proto-shell: add checkup timeout to restart interface.   Yousong Zhou
• [OpenWrt-Devel] TP-Link v3 header format description   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/2] proto-shell: add checkup timeout to restart interface.   Yousong Zhou
• [OpenWrt-Devel] [netifd][PATCH v2 1/2] Changes for more readability.   Yousong Zhou
• [OpenWrt-Devel] [netifd][PATCH v2 2/2] proto-shell: add checkup timeout to restart interface.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] malta: disable mips16   Yousong Zhou
• [OpenWrt-Devel] [PATCH] malta: disable mips16   Yousong Zhou
• [OpenWrt-Devel] [PATCH] uboot-sunxi: fix mmc transfer timeout for slow sdcards.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] Restore AP scan patch   openwrt-devel at couprie.net
• [OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL   feckert
• [OpenWrt-Devel] TP-WA7510 not in CC   smilebef at gmail.com
• [OpenWrt-Devel] i get no image for TL-WA7510   smilebef at gmail.com
• [OpenWrt-Devel] i get no image for TL-WA7510   smilebef at gmail.com
• [OpenWrt-Devel] Mount mmc block   smilebef at gmail.com
• [OpenWrt-Devel] [PATCH v2] AR71xx: Add Minibox V1.0 support   francesco.borromini at inventati.org
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Change OpenWrt Wifi default settings   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)   John kerry
• [OpenWrt-Devel] Separate Default SSID for 2.4GHz and 5GHz   John kerry
• [OpenWrt-Devel] AR9344 OpenWrt (Scanning Device)   John kerry
• [OpenWrt-Devel] [CC 15.05-rc3] knxd: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] mwan3: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] bmx6: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] oonf-dlep-proxy: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] oonf-dlep-radio: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] oonf-init-scripts: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] oonf-olsrd2: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] netperf: Update   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05-rc3] miniupnpd: Update   jow at openwrt.org
• [OpenWrt-Devel] Ask help for v4l2 build error.   shengkai
• [OpenWrt-Devel] [PATCH] add hostname validation check for netifd dhcp script   tymon.huang
• [OpenWrt-Devel] [netifd][PATCH] proto-shell: add hostname validation check for netifd dhcp script   tymon.huang
• [OpenWrt-Devel] [netifd][PATCH v3] proto-shell: add hostname validation check for netifd dhcp script   tymon.huang
• [OpenWrt-Devel] [PATCH 2/7] modules: move libahci to kmod-ata-core   wigyori at uid0.hu
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WR941ND v6 support   郭传鈜
• [OpenWrt-Devel] [PATCH v2 00/25] ramips: massive code cleanups   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex DB-WRT01   ＠SRCHACK.ORG

Last message date: Mon Aug 31 23:23:37 EDT 2015
Archived on: Thu Jun 25 05:56:14 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...