[OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)

[John kerry]

I followed the same steps and its working too. But this i want in wireless
config file, Because i dont want every time to add using GUI. So When i
connect to another router also, no need to add one more. I mean to say it
should be in default wireless config file.

On Mon, Aug 10, 2015 at 6:18 PM, David Lang <david at lang.hm> wrote:

> On Mon, 10 Aug 2015, John kerry wrote:
>
> Date: Mon, 10 Aug 2015 18:10:14 +0800
>> From: John kerry <kerry9842 at gmail.com>
>> To: Alex Weedy <weedy2887 at gmail.com>,
>>     OpenWrt Development List <openwrt-devel at lists.openwrt.org>
>> Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple
>> Wi-Fi
>>     client/AP interfaces on one radio)
>>
>> Firstly i configure wireless config as below:
>>
>> config wifi-device 'wifi0'
>>        option type 'qcawifi'
>>        option macaddr '00:01:11:00:01:00'
>>        option hwmode '11ng'
>>        option txpower '17'
>>        option htmode 'HT20'
>>        option disabled '0'
>>        option channel '1'
>>
>> config wifi-iface
>>        option device 'wifi0'
>>        option mode 'ap'
>>        option ssid 'Testing_ap'
>>        option network 'lan'
>>        option encryption 'psk2'
>>        option key 'Testing_ap'
>>
>> so its SSID was showing and able to connect any device to it.
>>
>> Then i scan the device and connect to one of it. While joining the network
>> i selected Client(WDS) then the wireless config becomes like below:
>>
>
> why don't you try following the steps in the video that you posted.
>
> first connect as a client, then add an additional interface and make the
> second interface the AP for things to connect to.
>
> the order may make a difference.
>
> David Lang
>
>
> config wifi-device 'wifi0'
>>        option type 'qcawifi'
>>        option macaddr '00:01:11:00:01:00'
>>        option hwmode '11ng'
>>        option txpower '17'
>>        option htmode 'HT20'
>>        option disabled '0'
>>        option channel '1'
>>
>> config wifi-iface
>>        option network 'wwan'
>>        option ssid 'D_Link_Router'
>>        option encryption 'psk2'
>>        option device 'wifi0'
>>        option mode 'sta'
>>        option key 'Dlink_Router'
>>        option wds '1'
>>
>> Then  i added one as shown in the video. Now its connected to router also
>> and this add one also showing so i can connect to this also.
>>
>> But i am not getting how to keep this in default wireless config.
>>
>> Because every time we cant add one to configure like this. It should be
>> like default should be in ap mode so any device we can connect, if its
>> connected to another router also that SSID still should be visible and
>> able
>> to connect to this.
>>
>
>
>
>> On Mon, Aug 10, 2015 at 2:57 PM, John kerry <kerry9842 at gmail.com> wrote:
>>
>> When i try to configure based on video, its shows 2 one as client another
>>> one as Master but i am not able to enable it . I mean to say wireless
>>> becomes disable. If i enable it using GUI also its not happening.
>>>
>>> On Mon, Aug 10, 2015 at 2:55 PM, David Lang <david at lang.hm> wrote:
>>>
>>> What happens when you try to follow the video?
>>>>
>>>> Based on your comments, i'm guessing that things don't work when you try
>>>> and configure the second network and have it with a different SSID than
>>>> the
>>>> first network that you put in client mode.
>>>>
>>>> Is this correct?
>>>>
>>>> David Lang
>>>>
>>>> On Mon, 10 Aug 2015, John kerry wrote:
>>>>
>>>> Yes, When i am connecting to Another router its changed to Client mode.
>>>>
>>>>>
>>>>> Can i configure this in repeater mode like its shows in below link:
>>>>>
>>>>> https://www.youtube.com/watch?v=3rbsh2zxPnk
>>>>>
>>>>>
>>>>
>>>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150810/a2e26c7a/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel