[OpenWrt-Devel] Change OpenWrt Wifi default settings
John kerry
kerry9842 at gmail.com
Tue Aug 4 04:13:10 EDT 2015
Hi,
I have 2 radio's wifi0 and wifi1 but one is configured for 2.4GHz and
another one is configured for 5GHz as below:
[image: Inline image 1]
First one i configured as below:
[image: Inline image 2]
wifi1 configured as below:
[image: Inline image 3]
mode configured as client and Network is WAN.
Is this are correct?
I have one doubts, both should be configured either 2.4GHz or 5GHz but for
wifi1 in GUI there is no option to change to 2.4GHz.
Thanks,
On Tue, Aug 4, 2015 at 2:56 PM, David Lang <david at lang.hm> wrote:
> you can't create a new radio with a script, you have to have a second
> radio in the hardware.
>
> wifi0 is one radio, wifi1 is the second. configure one as an AP, the other
> as a client (you probably want to make the client be part of the wan
> interface/firewall group if it's your connection to the Internet)
>
> As I said before, since you don't understand how the configs work, I'd
> suggest using the GUI to configure them and then look at what the resulting
> file looks like. A lot of expertise went into making the GUI set the right
> config options to make pretty complex things happen.
>
> David Lang
>
> On Tue, 4 Aug 2015, John kerry wrote:
>
> Date: Tue, 4 Aug 2015 14:41:38 +0800
>> From: John kerry <kerry9842 at gmail.com>
>> To: David Lang <david at lang.hm>
>> Cc: Weedy <weedy2887 at gmail.com>, N. Leiten <nickleiten at gmail.com>,
>> OpenWrt Development List <openwrt-devel at lists.openwrt.org>
>> Subject: Re: [OpenWrt-Devel] Change OpenWrt Wifi default settings
>>
>> Hi,
>>
>> Yes i configured the mode as AP. could you please guide how i can add
>> script for another radio.
>>
>> presently my wireless script is as below:
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> *config wifi-device 'wifi0' option type 'qcawifi' option
>> channel 'auto' option macaddr '00:03:7f:42:06:61' option
>> hwmode '11ng' option txpower '19' option htmode 'HT20'config
>> wifi-iface option device 'wifi0' option network 'lan'
>> option mode 'ap' option encryption 'psk2' option ssid
>> 'Test_ap_1' option key **'Test_ap_1'*
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>> *config wifi-device 'wifi1' option type 'qcawifi' option
>> channel 'auto' option macaddr '00:03:7f:42:06:62' option
>> hwmode '11na' option txpower '23' option htmode 'HT20'config
>> wifi-iface option device 'wifi1' option network 'lan'
>> option mode 'ap' option ssid 'Test_ap_2' option encryption
>> 'psk2' option key 'test_ap_2'*
>>
>>
>> *How i can change this to make it work.*
>>
>>
>>
>> *Thanks,*
>>
>> On Tue, Aug 4, 2015 at 2:26 PM, David Lang <david at lang.hm> wrote:
>>
>> A given radio can be either an AP or a client, but not both at once.
>>>
>>> so if you use a radio to connect to another AP, you are making it a
>>> client, and in client mode all it can do is connect to that other AP as
>>> shows up as the SSID of that other AP.
>>>
>>> you can do this with one radio, while using the other radio (assuming you
>>> have two) to act as an AP for local clients.
>>>
>>> David Lang
>>>
>>> On Tue, 4 Aug 2015, John kerry wrote:
>>>
>>> Hi,
>>>
>>>>
>>>> Its working, i am able to access internet but there is one problem,
>>>>
>>>> When i scan the wireless devices, its gives the list of devices are
>>>> there
>>>> nearby, then i connect anyone device, it will connect but my board wifi0
>>>> SSID name will change to that router which i connected. I mean LAN side
>>>> SSID should not change after connecting to WAN SSID.
>>>>
>>>>
>>>>
>>>> On Tue, Aug 4, 2015 at 12:42 PM, John kerry <kerry9842 at gmail.com>
>>>> wrote:
>>>>
>>>> Hi
>>>>
>>>>> This is my firewall file:
>>>>>
>>>>> config defaults
>>>>> option syn_flood '1'
>>>>> option input 'ACCEPT'
>>>>> option output 'ACCEPT'
>>>>> option forward 'REJECT'
>>>>>
>>>>> config zone
>>>>> option name 'lan'
>>>>> option network 'lan'
>>>>> option input 'ACCEPT'
>>>>> option output 'ACCEPT'
>>>>> option forward 'REJECT'
>>>>>
>>>>> config zone
>>>>> option name 'wan'
>>>>> option network 'wan'
>>>>> option input 'REJECT'
>>>>> option output 'ACCEPT'
>>>>> option forward 'REJECT'
>>>>> option masq '1'
>>>>> option mtu_fix '1'
>>>>>
>>>>> config forwarding
>>>>> option src 'lan'
>>>>> option dest 'wan'
>>>>>
>>>>> config rule
>>>>> option name 'Allow-DHCP-Renew'
>>>>> option src 'wan'
>>>>> option proto 'udp'
>>>>> option dest_port '68'
>>>>> option target 'ACCEPT'
>>>>> option family 'ipv4'
>>>>>
>>>>> config rule
>>>>> option name 'Allow-Ping'
>>>>> option src 'wan'
>>>>> option proto 'icmp'
>>>>> option icmp_type 'echo-request'
>>>>> option family 'ipv4'
>>>>> option target 'ACCEPT'
>>>>>
>>>>> config rule
>>>>> option name 'Allow-DHCPv6'
>>>>> option src 'wan'
>>>>> option proto 'udp'
>>>>> option src_ip 'fe80::/10'
>>>>> option src_port '547'
>>>>> option dest_ip 'fe80::/10'
>>>>> option dest_port '546'
>>>>> option family 'ipv6'
>>>>> option target 'ACCEPT'
>>>>>
>>>>> config rule
>>>>> option name 'Allow-ICMPv6-Input'
>>>>> option src 'wan'
>>>>> option proto 'icmp'
>>>>> list icmp_type 'echo-request'
>>>>> list icmp_type 'echo-reply'
>>>>> list icmp_type 'destination-unreachable'
>>>>> list icmp_type 'packet-too-big'
>>>>> list icmp_type 'time-exceeded'
>>>>> list icmp_type 'bad-header'
>>>>> list icmp_type 'unknown-header-type'
>>>>> list icmp_type 'router-solicitation'
>>>>> list icmp_type 'neighbour-solicitation'
>>>>> list icmp_type 'router-advertisement'
>>>>> list icmp_type 'neighbour-advertisement'
>>>>> option limit '1000/sec'
>>>>> option family 'ipv6'
>>>>> option target 'ACCEPT'
>>>>>
>>>>> config rule
>>>>> option name 'Allow-ICMPv6-Forward'
>>>>> option src 'wan'
>>>>> option dest '*'
>>>>> option proto 'icmp'
>>>>> list icmp_type 'echo-request'
>>>>> list icmp_type 'echo-reply'
>>>>> list icmp_type 'destination-unreachable'
>>>>> list icmp_type 'packet-too-big'
>>>>> list icmp_type 'time-exceeded'
>>>>> list icmp_type 'bad-header'
>>>>> list icmp_type 'unknown-header-type'
>>>>> option limit '1000/sec'
>>>>> option family 'ipv6'
>>>>> option target 'ACCEPT'
>>>>>
>>>>> config include
>>>>> option path '/etc/firewall.user'
>>>>>
>>>>> config include 'miniupnpd'
>>>>> option type 'script'
>>>>> option path '/usr/share/miniupnpd/firewall.include'
>>>>> option family 'IPv4'
>>>>> option reload '1'
>>>>>
>>>>> On Tue, Aug 4, 2015 at 12:38 PM, Weedy <weedy2887 at gmail.com> wrote:
>>>>>
>>>>> Is there something wrong with the default rules for your use case?
>>>>>
>>>>>>
>>>>>> Your WiFi interfaces are tagged LAN, things should just work.
>>>>>> On 4 Aug 2015 00:07, "John kerry" <kerry9842 at gmail.com> wrote:
>>>>>>
>>>>>> Hi,
>>>>>>
>>>>>>>
>>>>>>> below is the /etc/config/network and /etc/config/wireless changes.
>>>>>>>
>>>>>>> */etc/config/network:*
>>>>>>>
>>>>>>> config interface 'loopback'
>>>>>>> option ifname 'lo'
>>>>>>> option proto 'static'
>>>>>>> option ipaddr '127.0.0.1'
>>>>>>> option netmask '255.0.0.0'
>>>>>>>
>>>>>>> config interface 'lan'
>>>>>>> option ifname 'eth0.1 eth1'
>>>>>>> option type 'bridge'
>>>>>>> option proto 'static'
>>>>>>> option ipaddr '192.168.1.5'
>>>>>>> option netmask '255.255.255.0'
>>>>>>>
>>>>>>> config interface 'wan'
>>>>>>> option ifname 'eth0.2'
>>>>>>> option proto 'dhcp'
>>>>>>>
>>>>>>> config switch
>>>>>>> option name 'eth0'
>>>>>>> option reset '1'
>>>>>>> option enable_vlan '1'
>>>>>>>
>>>>>>> config switch_vlan
>>>>>>> option device 'eth0'
>>>>>>> option vlan '1'
>>>>>>> option ports '0t 2 3 4 5'
>>>>>>>
>>>>>>> config switch_vlan
>>>>>>> option device 'eth0'
>>>>>>> option vlan '2'
>>>>>>> option ports '0t 1'
>>>>>>>
>>>>>>> config switch
>>>>>>> option name 'eth1'
>>>>>>> option reset '1'
>>>>>>> option enable_vlan '1'
>>>>>>>
>>>>>>> config switch_vlan
>>>>>>> option device 'eth1'
>>>>>>> option vlan '1'
>>>>>>> option ports '0 1 2 3 4 5'
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> */etc/config/wireless:config wifi-device 'wifi0' option type
>>>>>>> 'qcawifi' option channel 'auto' option macaddr
>>>>>>> '00:03:7f:42:06:61' option hwmode '11ng' option txpower
>>>>>>> '19' option htmode 'HT20'config wifi-iface option
>>>>>>> device
>>>>>>> 'wifi0' option network 'lan' option mode 'ap'
>>>>>>> option
>>>>>>> encryption 'psk2' option ssid 'Test_ap_1' option key *
>>>>>>> *'Test_ap_1'*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *config wifi-device 'wifi1' option type 'qcawifi'
>>>>>>> option
>>>>>>> channel 'auto' option macaddr '00:03:7f:42:06:62'
>>>>>>> option
>>>>>>> hwmode '11na' option txpower '23' option htmode
>>>>>>> 'HT20'config
>>>>>>> wifi-iface option device 'wifi1' option network 'lan'
>>>>>>> option mode 'ap' option ssid 'Test_ap_2' option
>>>>>>> encryption
>>>>>>> 'psk2' option key 'test_ap_2''*
>>>>>>>
>>>>>>>
>>>>>>> *Thanks,*
>>>>>>>
>>>>>>>
>>>>>>> On Tue, Aug 4, 2015 at 11:56 AM, David Lang <david at lang.hm> wrote:
>>>>>>>
>>>>>>> can you connect via a wired port?
>>>>>>>
>>>>>>>>
>>>>>>>> given that you've been changing /etc/config/network and
>>>>>>>> /etc/config/wireless, could you show us what you ended up with
>>>>>>>> there?
>>>>>>>>
>>>>>>>> David Lang
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, 4 Aug 2015, John kerry wrote:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>>
>>>>>>>>> I am using ar71xx OpenWrt. I have connected internet connection to
>>>>>>>>> WAN
>>>>>>>>> port
>>>>>>>>> and my PC to LAN. I have enabled the WiFi0. The LAN port static IP
>>>>>>>>> i
>>>>>>>>> am
>>>>>>>>> able to open GUI and even my mobile i connected to Wifi AP and able
>>>>>>>>> to
>>>>>>>>> open
>>>>>>>>> GUI in mobile. But I am not able to access internet on mobile which
>>>>>>>>> is
>>>>>>>>> connected to wifi0 AP.
>>>>>>>>>
>>>>>>>>> I have added below script under /etc/firewall.user file.
>>>>>>>>> iptables ...flush
>>>>>>>>> iptables --table nat --flush
>>>>>>>>> iptables --delete-chain
>>>>>>>>> iptables --table nat --delete-chain
>>>>>>>>> iptables -A FORWARD -j ACCEPT -i br-lan -o eth0.2 -m state --state
>>>>>>>>> NEW
>>>>>>>>> iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT
>>>>>>>>> iptables -A POSTROUTING -t nat -o eth0.2 -j MASQUERADE
>>>>>>>>> echo 1 > /proc/sys/net/ipv4/ip_forward
>>>>>>>>>
>>>>>>>>> #where br-lan = LAN
>>>>>>>>> eth0.2 = WAN
>>>>>>>>>
>>>>>>>>> Could anyone help me to write the proper NAT rules so that able to
>>>>>>>>> access
>>>>>>>>> the internet.
>>>>>>>>>
>>>>>>>>> Thanks,
>>>>>>>>>
>>>>>>>>> On Mon, Aug 3, 2015 at 11:29 AM, John kerry <kerry9842 at gmail.com>
>>>>>>>>> wrote:
>>>>>>>>>
>>>>>>>>> Hello Guys,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> It's working. Thanks a lot to all of you :)
>>>>>>>>>>
>>>>>>>>>> On Mon, Aug 3, 2015 at 10:43 AM, David Lang <david at lang.hm>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> The way to do this is to first forget about the factory reset
>>>>>>>>>> problem
>>>>>>>>>>
>>>>>>>>>> and
>>>>>>>>>>> configure the AP to do what you want (including any encryption)
>>>>>>>>>>>
>>>>>>>>>>> then you can take the resulting file and put it into the build
>>>>>>>>>>> system so
>>>>>>>>>>> that it becomes the 'factory default' settings.
>>>>>>>>>>>
>>>>>>>>>>> Since you are not understanding how to configure the files from
>>>>>>>>>>> the
>>>>>>>>>>> documentation, configure them from the GUI and then look at the
>>>>>>>>>>> resulting
>>>>>>>>>>> files.
>>>>>>>>>>>
>>>>>>>>>>> David Lang
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> On Mon, 3 Aug 2015, John kerry wrote:
>>>>>>>>>>>
>>>>>>>>>>> Hi All,
>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>>>> I created separate files directory and added network and wireless
>>>>>>>>>>>> files
>>>>>>>>>>>> and
>>>>>>>>>>>> its working everything but still i am not able to use encryption
>>>>>>>>>>>> wpa2.
>>>>>>>>>>>> Below is the my script.
>>>>>>>>>>>> config wifi-device wifi0
>>>>>>>>>>>> option type qcawifi
>>>>>>>>>>>> option channel auto
>>>>>>>>>>>> option macaddr 00:03:7f:42:06:61
>>>>>>>>>>>> option hwmode 11ng
>>>>>>>>>>>> # REMOVE THIS LINE TO ENABLE WIFI:
>>>>>>>>>>>> option disabled 0
>>>>>>>>>>>>
>>>>>>>>>>>> config wifi-iface
>>>>>>>>>>>> option device wifi0
>>>>>>>>>>>> option network lan
>>>>>>>>>>>> option mode ap
>>>>>>>>>>>> option ssid CD-1
>>>>>>>>>>>> option encryption psk2
>>>>>>>>>>>> option key CD-1
>>>>>>>>>>>>
>>>>>>>>>>>> M I doing anything wrong?
>>>>>>>>>>>>
>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, Aug 3, 2015 at 6:40 AM, David Lang <david at lang.hm>
>>>>>>>>>>>> wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> to make the config be there after a factory reset, you need to
>>>>>>>>>>>> put
>>>>>>>>>>>> the
>>>>>>>>>>>>
>>>>>>>>>>>> changes into the image that you build.
>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> you already did this for /etc/config/network, do the same thing
>>>>>>>>>>>>> for
>>>>>>>>>>>>> /etc/config/wireless
>>>>>>>>>>>>>
>>>>>>>>>>>>> David Lang
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Sun, 2 Aug 2015, John kerry wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> Hi Leiten,
>>>>>>>>>>>>>
>>>>>>>>>>>>>
>>>>>>>>>>>>> I have one issue, after upgrading this firmware it will load
>>>>>>>>>>>>>
>>>>>>>>>>>>>> wireless
>>>>>>>>>>>>>> configuration with this changes, actually it should load when
>>>>>>>>>>>>>> i
>>>>>>>>>>>>>> do
>>>>>>>>>>>>>> factory
>>>>>>>>>>>>>> reset.
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <
>>>>>>>>>>>>>> kerry9842 at gmail.com
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Leiten,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Thank you so much, Its working :)
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <
>>>>>>>>>>>>>>> nickleiten at gmail.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Don't answer to my e-mail only, you need to add openwrt-devel
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> maillist
>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>> CC or just answer to CC, in each case I'll receive message
>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>> also
>>>>>>>>>>>>>>>> everyone could see all discussion.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user
>>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>>> kerry
>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi Leiten,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> I have added new files under and written below :
>>>>>>>>>>>>>>>>> vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Use index in prefix of filename to set order of execution,
>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> it'll
>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>> like '99-wireless'.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> #!/bin/sh
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> # Copyright (c) 2013 The Linux Foundation. All rights
>>>>>>>>>>>>>>>>> reserved.
>>>>>>>>>>>>>>>>> # Copyright (C) 2011 OpenWrt.org
>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> [ -e /etc/config/wireless ] && exit 0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Here is the problem. When uci-defaults invoke scripts
>>>>>>>>>>>>>>>>> there's
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> already
>>>>>>>>>>>>>>>> preconfiguration done and /etc/config/wireless already
>>>>>>>>>>>>>>>> exists,
>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>> script just exit at this point. Remove this line.
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> touch /etc/config/wireless
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> uci set wireless. at wifi-device[0].disabled=0;
>>>>>>>>>>>>>>>>> uci set system. at system[0].hostname=test_ap
>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].mode=ap
>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].encryption=none
>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].wds=1
>>>>>>>>>>>>>>>>> uci set wireless.radio0.disabled=0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> uci commit wireless
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> exit 0
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> and compile the source code using make V=s but still not
>>>>>>>>>>>>>>>>> changed
>>>>>>>>>>>>>>>>> default
>>>>>>>>>>>>>>>>> settings.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Please help me to make it works.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <
>>>>>>>>>>>>>>>>> nickleiten at gmail.com
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> You can also use uci-defaults mechanism for your purpose.
>>>>>>>>>>>>>>>>> Just
>>>>>>>>>>>>>>>>> put
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> script in base-files/etc/uci-defaults and set your
>>>>>>>>>>>>>>>>> preferrable
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> parameters with uci and don't forget to 'exit 0' at the end
>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>> script,
>>>>>>>>>>>>>>>>>> in elsecase it'll be run every time at boot ruining
>>>>>>>>>>>>>>>>>> changes.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> 2015-07-31 12:08 GMT+03:00 John kerry <
>>>>>>>>>>>>>>>>>> kerry9842 at gmail.com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> :
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> I am working on Ar71xx openWRT Luci project. By default
>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>> Wi-Fi
>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>> disabled and SSID is OpenWrt. I need to change the
>>>>>>>>>>>>>>>>>>> default
>>>>>>>>>>>>>>>>>>> settings.
>>>>>>>>>>>>>>>>>>> Could anyone help me to change the default settings.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Best Regards,
>>>>>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>
>>>>>>>
>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/a5f05671/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 30644 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/a5f05671/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23184 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/a5f05671/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 33862 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/a5f05671/attachment-0002.png>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list