[OpenWrt-Devel] Change OpenWrt Wifi default settings

[John kerry]

Hi All,

I created separate files directory and added network and wireless files and
its working everything but still i am not able to use encryption wpa2.
Below is the my script.
config wifi-device  wifi0
        option type     qcawifi
        option channel  auto
        option macaddr  00:03:7f:42:06:61
        option hwmode   11ng
        # REMOVE THIS LINE TO ENABLE WIFI:
        option disabled 0

config wifi-iface
        option device   wifi0
        option network  lan
        option mode     ap
        option ssid     CD-1
        option encryption psk2
        option key      CD-1

M I doing anything wrong?

Thanks,

On Mon, Aug 3, 2015 at 6:40 AM, David Lang <david at lang.hm> wrote:

> to make the config be there after a factory reset, you need to put the
> changes into the image that you build.
>
> you already did this for /etc/config/network, do the same thing for
> /etc/config/wireless
>
> David Lang
>
>
> On Sun, 2 Aug 2015, John kerry wrote:
>
> Hi Leiten,
>>
>> I have one issue, after upgrading this firmware it will load wireless
>> configuration with this changes, actually it should load when i do factory
>> reset.
>>
>> Thanks,
>>
>> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9842 at gmail.com> wrote:
>>
>> Hi Leiten,
>>>
>>> Thank you so much, Its working :)
>>>
>>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>>
>>> Hi,
>>>>
>>>> Don't answer to my e-mail only, you need to add openwrt-devel maillist
>>>> to
>>>> CC or just answer to CC, in each case I'll receive message but also
>>>> everyone could see all discussion.
>>>>
>>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
>>>> wrote:
>>>>
>>>>> Hi Leiten,
>>>>>
>>>>> I have added new files under and written below :
>>>>> vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>>>
>>>>
>>>> Use index in prefix of filename to set order of execution, so it'll be
>>>> like '99-wireless'.
>>>>
>>>>
>>>>> #!/bin/sh
>>>>> #
>>>>> # Copyright (c) 2013 The Linux Foundation. All rights reserved.
>>>>> # Copyright (C) 2011 OpenWrt.org
>>>>> #
>>>>>
>>>>> [ -e /etc/config/wireless ] && exit 0
>>>>>
>>>>
>>>> Here is the problem. When uci-defaults invoke scripts there's already
>>>> preconfiguration done and /etc/config/wireless already exists, so your
>>>> script just exit at this point. Remove this line.
>>>>
>>>>
>>>>> touch /etc/config/wireless
>>>>>
>>>>> uci set wireless. at wifi-device[0].disabled=0;
>>>>> uci set system. at system[0].hostname=test_ap
>>>>> uci set wireless. at wifi-iface[0].mode=ap
>>>>> uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>>>> uci set wireless. at wifi-iface[0].encryption=none
>>>>> uci set wireless. at wifi-iface[0].wds=1
>>>>> uci set wireless.radio0.disabled=0
>>>>>
>>>>> uci commit wireless
>>>>>
>>>>> exit 0
>>>>>
>>>>> and compile the source code using make V=s but still not changed
>>>>> default
>>>>> settings.
>>>>>
>>>>> Please help me to make it works.
>>>>>
>>>>> Thanks,
>>>>>
>>>>>
>>>>> On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>>>>
>>>>> You can also use uci-defaults mechanism for your purpose. Just put
>>>>>> script in base-files/etc/uci-defaults and set your preferrable
>>>>>> parameters with uci and don't forget to 'exit 0' at the end of script,
>>>>>> in elsecase it'll be run every time at boot ruining changes.
>>>>>>
>>>>>> 2015-07-31 12:08 GMT+03:00 John kerry <kerry9842 at gmail.com>:
>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>> I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is
>>>>>>> disabled and SSID is OpenWrt. I need to change the default settings.
>>>>>>> Could anyone help me to change the default settings.
>>>>>>>
>>>>>>>
>>>>>>> Best Regards,
>>>>>>> John
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> openwrt-devel mailing list
>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>
>>>>>>> _______________________________________________
>>>>>> openwrt-devel mailing list
>>>>>> openwrt-devel at lists.openwrt.org
>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>
>>>>>> _______________________________________________
>>>> openwrt-devel mailing list
>>>> openwrt-devel at lists.openwrt.org
>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>
>>>>
>>>
>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150803/cbc5b32c/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel