[OpenWrt-Devel] Change OpenWrt Wifi default settings

[David Lang]

The way to do this is to first forget about the factory reset problem and 
configure the AP to do what you want (including any encryption)

then you can take the resulting file and put it into the build system so that it 
becomes the 'factory default' settings.

Since you are not understanding how to configure the files from the 
documentation, configure them from the GUI and then look at the resulting files.

David Lang

On Mon, 3 Aug 2015, John kerry wrote:

> Hi All,
>
> I created separate files directory and added network and wireless files and
> its working everything but still i am not able to use encryption wpa2.
> Below is the my script.
> config wifi-device  wifi0
>        option type     qcawifi
>        option channel  auto
>        option macaddr  00:03:7f:42:06:61
>        option hwmode   11ng
>        # REMOVE THIS LINE TO ENABLE WIFI:
>        option disabled 0
>
> config wifi-iface
>        option device   wifi0
>        option network  lan
>        option mode     ap
>        option ssid     CD-1
>        option encryption psk2
>        option key      CD-1
>
> M I doing anything wrong?
>
> Thanks,
>
> On Mon, Aug 3, 2015 at 6:40 AM, David Lang <david at lang.hm> wrote:
>
>> to make the config be there after a factory reset, you need to put the
>> changes into the image that you build.
>>
>> you already did this for /etc/config/network, do the same thing for
>> /etc/config/wireless
>>
>> David Lang
>>
>>
>> On Sun, 2 Aug 2015, John kerry wrote:
>>
>> Hi Leiten,
>>>
>>> I have one issue, after upgrading this firmware it will load wireless
>>> configuration with this changes, actually it should load when i do factory
>>> reset.
>>>
>>> Thanks,
>>>
>>> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9842 at gmail.com> wrote:
>>>
>>> Hi Leiten,
>>>>
>>>> Thank you so much, Its working :)
>>>>
>>>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>>>
>>>> Hi,
>>>>>
>>>>> Don't answer to my e-mail only, you need to add openwrt-devel maillist
>>>>> to
>>>>> CC or just answer to CC, in each case I'll receive message but also
>>>>> everyone could see all discussion.
>>>>>
>>>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
>>>>> wrote:
>>>>>
>>>>>> Hi Leiten,
>>>>>>
>>>>>> I have added new files under and written below :
>>>>>> vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>>>>
>>>>>
>>>>> Use index in prefix of filename to set order of execution, so it'll be
>>>>> like '99-wireless'.
>>>>>
>>>>>
>>>>>> #!/bin/sh
>>>>>> #
>>>>>> # Copyright (c) 2013 The Linux Foundation. All rights reserved.
>>>>>> # Copyright (C) 2011 OpenWrt.org
>>>>>> #
>>>>>>
>>>>>> [ -e /etc/config/wireless ] && exit 0
>>>>>>
>>>>>
>>>>> Here is the problem. When uci-defaults invoke scripts there's already
>>>>> preconfiguration done and /etc/config/wireless already exists, so your
>>>>> script just exit at this point. Remove this line.
>>>>>
>>>>>
>>>>>> touch /etc/config/wireless
>>>>>>
>>>>>> uci set wireless. at wifi-device[0].disabled=0;
>>>>>> uci set system. at system[0].hostname=test_ap
>>>>>> uci set wireless. at wifi-iface[0].mode=ap
>>>>>> uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>>>>> uci set wireless. at wifi-iface[0].encryption=none
>>>>>> uci set wireless. at wifi-iface[0].wds=1
>>>>>> uci set wireless.radio0.disabled=0
>>>>>>
>>>>>> uci commit wireless
>>>>>>
>>>>>> exit 0
>>>>>>
>>>>>> and compile the source code using make V=s but still not changed
>>>>>> default
>>>>>> settings.
>>>>>>
>>>>>> Please help me to make it works.
>>>>>>
>>>>>> Thanks,
>>>>>>
>>>>>>
>>>>>> On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>>>>>
>>>>>> You can also use uci-defaults mechanism for your purpose. Just put
>>>>>>> script in base-files/etc/uci-defaults and set your preferrable
>>>>>>> parameters with uci and don't forget to 'exit 0' at the end of script,
>>>>>>> in elsecase it'll be run every time at boot ruining changes.
>>>>>>>
>>>>>>> 2015-07-31 12:08 GMT+03:00 John kerry <kerry9842 at gmail.com>:
>>>>>>>
>>>>>>>> Hi,
>>>>>>>>
>>>>>>>> I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is
>>>>>>>> disabled and SSID is OpenWrt. I need to change the default settings.
>>>>>>>> Could anyone help me to change the default settings.
>>>>>>>>
>>>>>>>>
>>>>>>>> Best Regards,
>>>>>>>> John
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>> openwrt-devel mailing list
>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>> openwrt-devel mailing list
>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>
>>>>>>> _______________________________________________
>>>>> openwrt-devel mailing list
>>>>> openwrt-devel at lists.openwrt.org
>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>
>>>>>
>>>>
>>>>
>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel