[OpenWrt-Devel] [PATCH v3] lantiq: get more status information from xDSL
Sylwek ScApi
sscapi at gmail.com
Thu Aug 6 10:01:28 EDT 2015
I don't know that You done something wrong, You misunderstood me, as
example We will use this part of patch:
:
@@ -226,16 +609,21 @@ line_state() {
fi
else
if [ "$ls" = "0x801" ]; then
- echo "Line State: UP [$ls: $s]"
+ echo "Line State: UP
[$ls: $s]"
else
- echo "Line State: DOWN [$ls: $s]"
+ echo "Line State:
DOWN [$ls: $s]"
fi
fi
}
Why You replace tab separated "words" with space separated "words" ?
Patch is send correctly but why replace "tabs" ?
My thunderbird is white space broken so You need to look in Your source
patch for reference.
Best Regards
2015-08-06 11:52 GMT+02:00 Florian Eckert <eckert.florian at googlemail.com>:
> Hello Petela
>
> sorry but i dont understand your question!
>
> I checked out openwrt with git and edited the file. After that i made
> "git format-patch -1" and then "git send-email --to
> openwrt-devel at lists.openwrt.org
> 0001-lantiq-get-more-status-information-from-xDSL.patch". I used the
> same whitespaces in this file as in the other functions of this file
> -> in this case it was an tab. What did i made wrong?
>
> Kind Regards Flo
>
> 2015-08-06 9:15 GMT+02:00 Sylwester Petela <sscapi at gmail.com>:
> > W dniu 2015-08-06 o 07:41, feckert pisze:
> >
> >> Signed-off-by: Florian Eckert <Eckert.Florian at googlemail.com>
> >> Signed-off-by: Helge Mader <hmader at tdt.de>
> >> Tested-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
> >> Tested-by: Andre Heider <a.heider at gmail.com>
> >> ---
> >>
> >> v2 fix annex and line mode comma
> >> v2 fix latency to ms
> >> v3 fix latency syntax quotation error "x ms"
> >> v3 fix echo "----" separation removed from status function
> >>
> >> .../lantiq/base-files/lib/functions/lantiq_dsl.sh | 412
> >> +++++++++++++++++++-
> >> 1 file changed, 400 insertions(+), 12 deletions(-)
> >> mode change 100644 => 100755
> >> target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> >>
> >> diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> >> b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> >> old mode 100644
> >> new mode 100755
> >> index 56b8652..7809d01
> >> --- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> >> +++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
> >> @@ -19,6 +19,9 @@ dsl_cmd() {
> >> dsl_val() {
> >> echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
> >> }
> >> +dsl_string() {
> >> + echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
> >> +}
> >> #
> >> # Simple divide by 10 routine to cope with one decimal place
> >> @@ -49,6 +52,16 @@ scale() {
> >> fi
> >> }
> >> +scale_latency() {
> >> + local val=$1
> >> + local a
> >> + local b
> >> +
> >> + a=$(expr $val / 100)
> >> + b=$(expr $val % 100)
> >> + printf "%d.%d ms" ${a} ${b}
> >> +}
> >> +
> >> #
> >> # Read the data rates for both directions
> >> #
> >> @@ -77,7 +90,7 @@ data_rates() {
> >> echo "dsl.data_rate_down_s=\"$sdrd\""
> >> echo "dsl.data_rate_up_s=\"$sdru\""
> >> else
> >> - echo "Data Rate: ${sdrd}/s / ${sdru}/s"
> >> + echo "Data Rate: Down:
> >> ${sdrd}/s / Up: ${sdru}/s"
> >> fi
> >> }
> >> @@ -92,11 +105,340 @@ chipset() {
> >> vig=$(dsl_cmd vig)
> >> cs=$(dsl_val "$vig" DSL_ChipSetType)
> >> csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
> >> + csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
> >> + csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
> >> if [ "$action" = "lucistat" ]; then
> >> echo "dsl.chipset=\"${cs} ${csv}\""
> >> + echo "dsl.firmware_version=\"${csfw}\""
> >> + echo "dsl.api_version=\"${csapi}\""
> >> else
> >> - echo "Chipset: ${cs} ${csv}"
> >> + echo "Chipset: ${cs}
> >> ${csv}"
> >> + echo "Firmware Version: ${csfw}"
> >> + echo "API Version:
> ${csapi}"
> >> + fi
> >> +}
> >> +
> >> +#
> >> +# Vendor information
> >> +#
> >> +vendor() {
> >> + local lig
> >> + local vid
> >> + local svid
> >> +
> >> + lig=$(dsl_cmd g997lig 1)
> >> + vid=$(dsl_string "$lig" G994VendorID)
> >> + svid=$(dsl_string "$lig" SystemVendorID)
> >> +
> >> + if [ "$action" = "lucistat" ]; then
> >> + echo "dsl.atuc_vendor_id=\"${vid}\""
> >> + echo "dsl.atuc_system_vendor_id=\"${svid}\""
> >> + else
> >> + echo "ATU-C Vendor ID: ${vid}"
> >> + echo "ATU-C System Vendor ID: ${svid}"
> >> + fi
> >> +}
> >> +
> >> +#
> >> +# XTSE capabilities
> >> +#
> >> +xtse() {
> >> + local xtusesg
> >> + local xtse1
> >> + local xtse2
> >> + local xtse3
> >> + local xtse4
> >> + local xtse5
> >> + local xtse6
> >> + local xtse7
> >> + local xtse8
> >> +
> >> + local xtse_s=""
> >> +
> >> + local annex_s=""
> >> + local line_mode_s=""
> >> + local cmd=""
> >> +
> >> + xtusesg=$(dsl_cmd g997xtusesg)
> >> + xtse1=$(dsl_val "$xtusesg" XTSE1)
> >> + xtse2=$(dsl_val "$xtusesg" XTSE2)
> >> + xtse3=$(dsl_val "$xtusesg" XTSE3)
> >> + xtse4=$(dsl_val "$xtusesg" XTSE4)
> >> + xtse5=$(dsl_val "$xtusesg" XTSE5)
> >> + xtse6=$(dsl_val "$xtusesg" XTSE6)
> >> + xtse7=$(dsl_val "$xtusesg" XTSE7)
> >> + xtse8=$(dsl_val "$xtusesg" XTSE8)
> >> +
> >> + # Evaluate Annex (according to G.997.1, 7.3.1.1.1)
> >> + if [ $((xtse1 & 13)) != 0 \
> >> + -o $((xtse2 & 1)) != 0 \
> >> + -o $((xtse3 & 12)) != 0 \
> >> + -o $((xtse4 & 3)) != 0 \
> >> + -o $((xtse6 & 3)) != 0 \
> >> + -o $((xtse8 & 1)) != 0 ]; then
> >> + annex_s=" A,"
> >> + fi
> >> +
> >> + if [ $((xtse1 & 48)) != 0 \
> >> + -o $((xtse2 & 2)) != 0 \
> >> + -o $((xtse3 & 48)) != 0 \
> >> + -o $((xtse6 & 12)) != 0 \
> >> + -o $((xtse8 & 2)) != 0 ]; then
> >> + annex_s="$annex_s B,"
> >> + fi
> >> +
> >> + if [ $((xtse1 & 194)) != 0 \
> >> + -o $((xtse2 & 12)) != 0 \
> >> + -o $((xtse8 & 4)) != 0 ]; then
> >> + annex_s="$annex_s C,"
> >> + fi
> >> +
> >> + if [ $((xtse4 & 48)) != 0 \
> >> + -o $((xtse5 & 3)) != 0 \
> >> + -o $((xtse6 & 192)) != 0 ]; then
> >> + annex_s="$annex_s I,"
> >> + fi
> >> +
> >> + if [ $((xtse4 & 192)) != 0 \
> >> + -o $((xtse7 & 3)) != 0 ]; then
> >> + annex_s="$annex_s J,"
> >> + fi
> >> +
> >> + if [ $((xtse5 & 60)) != 0 ]; then
> >> + annex_s="$annex_s L,"
> >> + fi
> >> +
> >> + if [ $((xtse5 & 192)) != 0 \
> >> + -o $((xtse7 & 12)) != 0 ]; then
> >> + annex_s="$annex_s M,"
> >> + fi
> >> +
> >> + annex_s=`echo ${annex_s:1}`
> >> + annex_s=`echo ${annex_s%?}`
> >> +
> >> + # Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
> >> +
> >> + # Regional standard: ANSI T1.413
> >> + if [ $((xtse1 & 1)) != 0 ]; then
> >> + line_mode_s=" T1.413,"
> >> + fi
> >> +
> >> + # Regional standard: TS 101 388
> >> + if [ $((xtse1 & 1)) != 0 ]; then
> >> + line_mode_s="$line_mode_s TS 101 388,"
> >> + fi
> >> +
> >> + if [ $((xtse1 & 252)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.992.1 (ADSL),"
> >> + fi
> >> +
> >> + if [ $((xtse2 & 15)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
> >> + fi
> >> +
> >> + if [ $((xtse3 & 60)) != 0 \
> >> + -o $((xtse4 & 240)) != 0 \
> >> + -o $((xtse5 & 252)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.992.3 (ADSL2),"
> >> + fi
> >> +
> >> + if [ $((xtse4 & 3)) != 0 \
> >> + -o $((xtse5 & 3)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
> >> + fi
> >> +
> >> + if [ $((xtse6 & 199)) != 0 \
> >> + -o $((xtse7 & 15)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
> >> + fi
> >> +
> >> + if [ $((xtse8 & 7)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.993.2 (VDSL2),"
> >> + fi
> >> +
> >> + #!!! PROPRIETARY & INTERMEDIATE USE !!!
> >> + if [ $((xtse8 & 128)) != 0 ]; then
> >> + line_mode_s="$line_mode_s G.993.1 (VDSL),"
> >> + fi
> >> +
> >> + line_mode_s=`echo ${line_mode_s:1}`
> >> + line_mode_s=`echo ${line_mode_s%?}`
> >> +
> >> + xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5},
> >> ${xtse6}, ${xtse7}, ${xtse8}"
> >> +
> >> + if [ "$action" = "lucistat" ]; then
> >> + echo "dsl.xtse1=$xtse1"
> >> + echo "dsl.xtse2=$xtse2"
> >> + echo "dsl.xtse3=$xtse3"
> >> + echo "dsl.xtse4=$xtse4"
> >> + echo "dsl.xtse5=$xtse5"
> >> + echo "dsl.xtse6=$xtse6"
> >> + echo "dsl.xtse7=$xtse7"
> >> + echo "dsl.xtse8=$xtse8"
> >> + echo "dsl.xtse_s=\"$xtse_s\""
> >> + echo "dsl.annex_s=\"${annex_s}\""
> >> + echo "dsl.line_mode_s=\"${line_mode_s}\""
> >> + else
> >> + echo "XTSE Capabilities:
> ${xtse_s}"
> >> + echo "Annex:
> >> ${annex_s}"
> >> + echo "Line Mode:
> >> ${line_mode_s}"
> >> + fi
> >> +}
> >> +
> >> +#
> >> +# Power Management Mode
> >> +#
> >> +power_mode() {
> >> + local pmsg=$(dsl_cmd g997pmsg)
> >> + local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
> >> + local s;
> >> +
> >> + case "$pm" in
> >> + "-1") s="Power management state is not
> >> available" ;;
> >> + "0") s="L0 - Synchronized" ;;
> >> + "1") s="L1 - Power Down Data transmission
> >> (G.992.2)" ;;
> >> + "2") s="L2 - Power Down Data transmission
> >> (G.992.3 and G.992.4)" ;;
> >> + "3") s="L3 - No power" ;;
> >> + *) s="unknown" ;;
> >> + esac
> >> +
> >> + if [ "$action" = "lucistat" ]; then
> >> + echo "dsl.power_mode_num=$pm"
> >> + echo "dsl.power_mode_s=\"$s\""
> >> + else
> >> + echo "Power Management Mode: $s"
> >> + fi
> >> +}
> >> +
> >> +#
> >> +# Latency type (interleave delay)
> >> +#
> >> +latency_delay() {
> >> + local csg
> >> +
> >> + local idu
> >> + local idu_s;
> >> + local sidu
> >> +
> >> + local idd
> >> + local idd_s;
> >> + local sidd
> >> +
> >> + csg=$(dsl_cmd g997csg 0 1)
> >> + idd=$(dsl_val "$csg" ActualInterleaveDelay)
> >> +
> >> + csg=$(dsl_cmd g997csg 0 0)
> >> + idu=$(dsl_val "$csg" ActualInterleaveDelay)
> >> +
> >> + [ -z "$idd" ] && idd=0
> >> + [ -z "$idu" ] && idu=0
> >> +
> >> + if [ "$idd" > 100 ]; then
> >> + idd_s="Interleave"
> >> + else
> >> + idd_s="Fast"
> >> + fi
> >> +
> >> + if [ "$idu" > 100 ]; then
> >> + idu_s="Interleave"
> >> + else
> >> + idu_s="Fast"
> >> + fi
> >> +
> >> + sidu=$(scale_latency $idu)
> >> + sidd=$(scale_latency $idd)
> >> +
> >> + if [ "$action" = "lucistat" ]; then
> >> + echo "dsl.latency_num_down=\"$sidu\""
> >> + echo "dsl.latency_num_up=\"$sidd\""
> >> + echo "dsl.latency_s_down=\"$idd_s\""
> >> + echo "dsl.latency_s_up=\"$idu_s\""
> >> + else
> >> + echo "Latency / Interleave Delay: Down:
> >> ${idd_s} (${sidd}) / Up: ${idu_s} (${sidu})"
> >> + fi
> >> +}
> >> +
> >> +#
> >> +# Errors
> >> +#
> >> +errors() {
> >> + local lsctg
> >> + local dpctg
> >> + local ccsg
> >> + local esf
> >> + local esn
> >> + local sesf
> >> + local sesn
> >> + local lossf
> >> + local lossn
> >> + local uasf
> >> + local uasn
> >> +
> >> + local crc_pf
> >> + local crc_pn
> >> + local crcp_pf
> >> + local crcp_pn
> >> + local hecf
> >> + local hecn
> >> +
> >> + local fecn
> >> + local fecf
> >> +
> >> + lsctg=$(dsl_cmd pmlsctg 1)
> >> + esf=$(dsl_val "$lsctg" nES)
> >> + sesf=$(dsl_val "$lsctg" nSES)
> >> + lossf=$(dsl_val "$lsctg" nLOSS)
> >> + uasf=$(dsl_val "$lsctg" nUAS)
> >> +
> >> + lsctg=$(dsl_cmd pmlsctg 0)
> >> + esn=$(dsl_val "$lsctg" nES)
> >> + sesn=$(dsl_val "$lsctg" nSES)
> >> + lossn=$(dsl_val "$lsctg" nLOSS)
> >> + uasn=$(dsl_val "$lsctg" nUAS)
> >> +
> >> + dpctg=$(dsl_cmd pmdpctg 0 1)
> >> + hecf=$(dsl_val "$dpctg" nHEC)
> >> + crc_pf=$(dsl_val "$dpctg" nCRC_P)
> >> + crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
> >> +
> >> + dpctg=$(dsl_cmd pmdpctg 0 0)
> >> + hecn=$(dsl_val "$dpctg" nHEC)
> >> + crc_pn=$(dsl_val "$dpctg" nCRC_P)
> >> + crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
> >> +
> >> + ccsg=$(dsl_cmd pmccsg 0 1 0)
> >> + fecf=$(dsl_val "$ccsg" nFEC)
> >> +
> >> + ccsg=$(dsl_cmd pmccsg 0 0 0)
> >> + fecn=$(dsl_val "$ccsg" nFEC)
> >> +
> >> + if [ "$action" = "lucistat" ]; then
> >> + echo "dsl.errors_fec_near=$fecn"
> >> + echo "dsl.errors_fec_far=$fecf"
> >> + echo "dsl.errors_es_near=$esn"
> >> + echo "dsl.errors_es_far=$esf"
> >> + echo "dsl.errors_ses_near=$sesn"
> >> + echo "dsl.errors_ses_far=$sesf"
> >> + echo "dsl.errors_loss_near=$lossn"
> >> + echo "dsl.errors_loss_far=$lossf"
> >> + echo "dsl.errors_uas_near=$uasn"
> >> + echo "dsl.errors_uas_far=$uasf"
> >> + echo "dsl.errors_hec_near=$hecn"
> >> + echo "dsl.errors_hec_far=$hecf"
> >> + echo "dsl.errors_crc_p_near=$crc_pn"
> >> + echo "dsl.errors_crc_p_far=$crc_pf"
> >> + echo "dsl.errors_crcp_p_near=$crcp_pn"
> >> + echo "dsl.errors_crcp_p_far=$crcp_pf"
> >> + else
> >> + echo "Forward Error Correction Seconds (FECS): Near:
> >> ${fecn} / Far: ${fecf}"
> >> + echo "Errored seconds (ES): Near:
> >> ${esn} / Far: ${esf}"
> >> + echo "Severely Errored Seconds (SES): Near:
> >> ${sesn} / Far: ${sesf}"
> >> + echo "Loss of Signal Seconds (LOSS): Near:
> >> ${lossn} / Far: ${lossf}"
> >> + echo "Unavailable Seconds (UAS): Near:
> >> ${uasn} / Far: ${uasf}"
> >> + echo "Header Error Code Errors (HEC): Near:
> >> ${hecn} / Far: ${hecf}"
> >> + echo "Non Pre-emtive CRC errors (CRC_P): Near:
> >> ${crcp_pn} / Far: ${crcp_pf}"
> >> + echo "Pre-emtive CRC errors (CRCP_P): Near:
> >> ${crcp_pn} / Far: ${crcp_pf}"
> >> fi
> >> }
> >> @@ -118,11 +460,6 @@ line_uptime() {
> >> [ -z "$et" ] && et=0
> >> - if [ "$action" = "lucistat" ]; then
> >> - echo "dsl.line_uptime=${et}"
> >> - return
> >> - fi
> >> -
> >> d=$(expr $et / 86400)
> >> etr=$(expr $et % 86400)
> >> h=$(expr $etr / 3600)
> >> @@ -137,7 +474,16 @@ line_uptime() {
> >> [ "${d}" -ne 0 ] && rc="${d}d ${rc}"
> >> [ -z "$rc" ] && rc="down"
> >> - echo "Line Uptime: ${rc}"
> >> +
> >> +
> >> + if [ "$action" = "lucistat" ]; then
> >> + echo "dsl.line_uptime=${et}"
> >> + echo "dsl.line_uptime_s=\"${rc}\""
> >> + else
> >> +
> >> + echo "Line Uptime Seconds: ${et}"
> >> + echo "Line Uptime: ${rc}"
> >> + fi
> >> }
> >> #
> >> @@ -147,35 +493,72 @@ line_data() {
> >> local lsg
> >> local latnu
> >> local latnd
> >> + local satnu
> >> + local satnd
> >> local snru
> >> local snrd
> >> + local attndru
> >> + local attndrd
> >> + local sattndru
> >> + local sattndrd
> >> + local actatpu
> >> + local actatpd
> >> lsg=$(dsl_cmd g997lsg 1 1)
> >> latnd=$(dsl_val "$lsg" LATN)
> >> + satnd=$(dsl_val "$lsg" SATN)
> >> snrd=$(dsl_val "$lsg" SNR)
> >> + attndrd=$(dsl_val "$lsg" ATTNDR)
> >> + actatpd=$(dsl_val "$lsg" ACTATP)
> >> lsg=$(dsl_cmd g997lsg 0 1)
> >> latnu=$(dsl_val "$lsg" LATN)
> >> + satnu=$(dsl_val "$lsg" SATN)
> >> snru=$(dsl_val "$lsg" SNR)
> >> + attndru=$(dsl_val "$lsg" ATTNDR)
> >> + actatpu=$(dsl_val "$lsg" ACTATP)
> >> [ -z "$latnd" ] && latnd=0
> >> [ -z "$latnu" ] && latnu=0
> >> + [ -z "$satnd" ] && satnd=0
> >> + [ -z "$satnu" ] && satnu=0
> >> [ -z "$snrd" ] && snrd=0
> >> [ -z "$snru" ] && snru=0
> >> latnd=$(dbt $latnd)
> >> latnu=$(dbt $latnu)
> >> + satnd=$(dbt $satnd)
> >> + satnu=$(dbt $satnu)
> >> snrd=$(dbt $snrd)
> >> snru=$(dbt $snru)
> >> + actatpd=$(dbt $actatpd)
> >> + actatpu=$(dbt $actatpu)
> >> +
> >> + [ -z "$attndrd" ] && attndrd=0
> >> + [ -z "$attndru" ] && attndru=0
> >> +
> >> + sattndrd=$(scale $attndrd)
> >> + sattndru=$(scale $attndru)
> >>
> >> if [ "$action" = "lucistat" ]; then
> >> echo "dsl.line_attenuation_down=$latnd"
> >> echo "dsl.line_attenuation_up=$latnu"
> >> echo "dsl.noise_margin_down=$snrd"
> >> echo "dsl.noise_margin_up=$snru"
> >> + echo "dsl.signal_attenuation_down=$satnd"
> >> + echo "dsl.signal_attenuation_up=$satnu"
> >> + echo "dsl.actatp_down=$actatpd"
> >> + echo "dsl.actatp_up=$actatpu"
> >> + echo "dsl.max_data_rate_down=$attndrd"
> >> + echo "dsl.max_data_rate_up=$attndru"
> >> + echo "dsl.max_data_rate_down_s=\"$sattndrd\""
> >> + echo "dsl.max_data_rate_up_s=\"$sattndru\""
> >> else
> >> - echo "Line Attenuation: ${latnd}dB / ${latnu}dB"
> >> - echo "Noise Margin: ${snrd}dB / ${snru}dB"
> >> + echo "Line Attenuation (LATN): Down:
> >> ${latnd}dB / Up: ${latnu}dB"
> >> + echo "Signal Attenuation (SATN): Down:
> >> ${satnd}dB / Up: ${satnu}dB"
> >> + echo "Noise Margin (SNR): Down:
> >> ${snrd}dB / Up: ${snru}dB"
> >> + echo "Aggregate Transmit Power(ACTATP): Down:
> >> ${actatpd}dB / Up: ${actatpu}dB"
> >> + echo "Max. Attainable Data Rate (ATTNDR): Down:
> >> ${sattndrd}/s / Up: ${sattndru}/s"
> >> fi
> >> }
> >> @@ -226,16 +609,21 @@ line_state() {
> >> fi
> >> else
> >> if [ "$ls" = "0x801" ]; then
> >> - echo "Line State: UP [$ls: $s]"
> >> + echo "Line State:
> UP
> >> [$ls: $s]"
> >> else
> >> - echo "Line State: DOWN [$ls: $s]"
> >> + echo "Line State:
> >> DOWN [$ls: $s]"
> >> fi
> >> fi
> >> }
> >
> >
> > Above change intrigues me a lot.
> > Is this patch intended whitespace broken or by mistake every "tab is
> > converted into "space"?
> >
> >
> >> status() {
> >> + vendor
> >> chipset
> >> + xtse
> >> line_state
> >> + errors
> >> + power_mode
> >> + latency_delay
> >> data_rates
> >> line_data
> >> line_uptime
> >
> >
>
>
>
> --
> Mit freundlichen Grüßen
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150806/f700cd9b/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list