[OpenWrt-Devel] [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350
Sedat Dilek
sedat.dilek at gmail.com
Mon Aug 17 07:41:21 EDT 2015
On Mon, Aug 17, 2015 at 1:24 PM, John Crispin <blogic at openwrt.org> wrote:
> Hi Tobias,
>
> Thanks for the patch. unfortunately its line mangled and white space
> broken. also it seems you sent a HTML email. If you take a few minutes
> to setup git, you can use "git send-email" to avoid these issues.
>
On Debian/Ubuntu install "git send-email" or check your distubition's
docs and help...
root# apt-get update && apt-get install git-email
Feel free to adapt my local dot-gitconfig...
$ cat ~/.gitconfig
[user]
name = Sedat Dilek
email = sedat.dilek at gmail.com
[core]
abbrev = 12
[format]
subjectprefix = PATCH
signoff = false
[pretty]
fixes = Fixes: %h (\"%s\")
[push]
default = matching
[sendemail]
smtpserver = smtp.gmail.com
smtpserverport = 587
smtpencryption = tls
smtpuser = sedat.dilek at gmail.com
Hope this helps.
- sed@ -
> John
>
>
> On 15/08/2015 10:08, Tobias Welz wrote:
>> Hello OpenWrt Developers,
>>
>> I added the WIZnet WizFi630A Platform to the trunk. The board is based
>> on Ralink RT5350 in MiniPci Express Form Factor.
>>
>> Kind regards
>> Tobias Welz
>>
>>
>>
>> From bd69bb513e36abda43e86f0eb64caf004260e415 Mon Sep 17 00:00:00 2001
>> From: Tobias Welz <tw at wiznet.eu>
>> Date: Sat, 15 Aug 2015 02:30:34 +0200
>> Subject: [PATCH] Added WIZnet WizFi630A Platform based on Ralink RT5350
>>
>>
>> Signed-off-by: Tobias Welz <tw at wiznet.eu>
>> ---
>> .../linux/ramips/base-files/etc/board.d/02_network | 6 +
>> target/linux/ramips/base-files/etc/diag.sh | 3 +
>> target/linux/ramips/base-files/lib/ramips.sh | 3 +
>> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
>> target/linux/ramips/dts/WIZFI630A.dts | 304
>> ++++++++++++++++++++
>> target/linux/ramips/image/Makefile | 3 +
>> target/linux/ramips/rt305x/profiles/wizfi630a.mk | 18 ++
>> 7 files changed, 338 insertions(+)
>> create mode 100644 target/linux/ramips/dts/WIZFI630A.dts
>> create mode 100644 target/linux/ramips/rt305x/profiles/wizfi630a.mk
>>
>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
>> b/target/linux/ramips/base-files/etc/board.d/02_network
>> index da1854a..c211ab9 100755
>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
>> @@ -235,6 +235,7 @@ ramips_setup_interfaces()
>> ucidef_add_switch_vlan "switch0" "2" "4 6t"
>> ;;
>>
>> + wizfi630a | \
>> y1s)
>> ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
>> ucidef_add_switch "switch0" "1" "1"
>> @@ -297,6 +298,11 @@ ramips_setup_macs()
>> wan_mac=$(mtd_get_mac_binary factory 46)
>> ;;
>>
>> + wizfi630a)
>> + lan_mac=$(mtd_get_mac_binary factory 4)
>> + wan_mac=$(mtd_get_mac_binary factory 40)
>> + ;;
>> +
>> w306r-v20)
>> lan_mac=$(cat /sys/class/net/eth0/address)
>> wan_mac=$(macaddr_add "$lan_mac" 5)
>> diff --git a/target/linux/ramips/base-files/etc/diag.sh
>> b/target/linux/ramips/base-files/etc/diag.sh
>> index e63f0df..3ffcc22 100644
>> --- a/target/linux/ramips/base-files/etc/diag.sh
>> +++ b/target/linux/ramips/base-files/etc/diag.sh
>> @@ -252,6 +252,9 @@ get_status_led() {
>> zte-q7)
>> status_led="zte:red:status"
>> ;;
>> + wizfi630a)
>> + status_led="wizfi630a::run"
>> + ;;
>> mzk-dp150n)
>> status_led="mzkdp150n:green:power"
>> ;;
>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
>> b/target/linux/ramips/base-files/lib/ramips.sh
>> index 7db6d37..474fdb8 100755
>> --- a/target/linux/ramips/base-files/lib/ramips.sh
>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
>> @@ -430,6 +430,9 @@ ramips_board_detect() {
>> *"Planex MZK-DP150N")
>> name="mzk-dp150n"
>> ;;
>> + *"WIZnet WizFi630A")
>> + name="wizfi630a"
>> + ;;
>> *)
>> name="generic"
>> ;;
>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> index 8221997..bdc6be9 100755
>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
>> @@ -105,6 +105,7 @@ platform_check_image() {
>> whr-300hp2 |\
>> whr-600d |\
>> whr-1166d |\
>> + wizfi630a |\
>> wsr-600 |\
>> wl-330n | \
>> wl-330n3g | \
>> diff --git a/target/linux/ramips/dts/WIZFI630A.dts
>> b/target/linux/ramips/dts/WIZFI630A.dts
>> new file mode 100644
>> index 0000000..b3f655d
>> --- /dev/null
>> +++ b/target/linux/ramips/dts/WIZFI630A.dts
>> @@ -0,0 +1,304 @@
>> +/dts-v1/;
>> +
>> +/include/ "rt5350.dtsi"
>> +
>> +/ {
>> + compatible = "wizfi630a", "ralink,rt5350-soc";
>> + model = "WIZnet WizFi630A";
>> +
>> + chosen {
>> + bootargs = "console=ttyS1,115200";
>> + };
>> +
>> + palmbus at 10000000 {
>> + gpio1: gpio at 660 {
>> + status = "okay";
>> + };
>> +
>> + spi at b00 {
>> + status = "okay";
>> +
>> + m25p80 at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "w25q128";
>> + reg = <0>;
>> + linux,modalias = "m25p80", "w25q128";
>> + spi-max-frequency = <10000000>;
>> +
>> + partition at 0 {
>> + label = "uboot";
>> + reg = <0x0 0x30000>;
>> + read-only;
>> + };
>> +
>> + partition at 30000 {
>> + label = "uboot-env";
>> + reg = <0x30000 0x10000>;
>> + read-only;
>> + };
>> +
>> + factory: partition at 40000 {
>> + label = "factory";
>> + reg = <0x40000 0x10000>;
>> + read-only;
>> + };
>> +
>> + partition at 50000 {
>> + label = "firmware";
>> + reg = <0x50000 0xfb0000>;
>> + };
>> + };
>> + };
>> +
>> + uart at 500 {
>> + compatible = "ralink,mt7620a-uart",
>> "ralink,rt2880-uart", "ns16550a";
>> + reg = <0x500 0x100>;
>> +
>> + resets = <&rstctrl 12>;
>> + reset-names = "uart";
>> +
>> + interrupt-parent = <&intc>;
>> + interrupts = <5>;
>> +
>> + reg-shift = <2>;
>> +
>> + status = "okay";
>> + };
>> +
>> +
>> + uartlite at c00 {
>> + compatible = "ralink,mt7620a-uart",
>> "ralink,rt2880-uart", "ns16550a";
>> + reg = <0xc00 0x100>;
>> +
>> + resets = <&rstctrl 19>;
>> + reset-names = "uartl";
>> +
>> + interrupt-parent = <&intc>;
>> + interrupts = <12>;
>> +
>> + reg-shift = <2>;
>> +
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uartlite_pins>;
>> + };
>> + };
>> +
>> + pinctrl {
>> + state_default: pinctrl0 {
>> + gpio {
>> + ralink,group = "i2c", "jtag" ;
>> + ralink,function = "gpio";
>> + };
>> + };
>> +
>> + uartf_gpio_pins: uartf_gpio {
>> + uartf_gpio {
>> + ralink,group = "uartf";
>> + //ralink,function = "gpio uartf";
>> + ralink,function = "uartf";
>> + };
>> + };
>> +
>> + uartlite_pins: uartlite {
>> + uart {
>> + ralink,group = "uartlite";
>> + ralink,function = "uartlite";
>> + };
>> + };
>> + };
>> +
>> + ethernet at 10100000 {
>> + mtd-mac-address = <&factory 0x4>;
>> + };
>> +
>> + esw at 10110000 {
>> + ralink,portmap = <0x17>;
>> + };
>> +
>> + wmac at 10180000 {
>> + ralink,mtd-eeprom = <&factory 0>;
>> + };
>> +
>> + ehci at 101c0000 {
>> + status = "okay";
>> + };
>> +
>> + ohci at 101c1000 {
>> + status = "okay";
>> + };
>> +
>> +
>> + gpio-export {
>> + compatible = "gpio-export";
>> + #size-cells = <0>;
>> +/*
>> + gpio22 {
>> + // WAN
>> + gpio-export,name = "gpio22";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio1 0 0>; // path lfd dir
>> + };
>> + gpio23 {
>> + // LAN1
>> + gpio-export,name = "gpio23";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio1 1 0>;
>> + };
>> + gpio24 {
>> + // LAN2
>> + gpio-export,name = "gpio24";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio1 2 0>;
>> + };
>> +
>> + // UARTF - UART1
>> + gpio7 {
>> + // UARTF_RTS_N - HW Pin 6
>> + gpio-export,name = "gpio7";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 7 0>;
>> + };
>> + gpio8 {
>> + // UARTF_TXD - HW Pin 10
>> + gpio-export,name = "gpio8";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 8 0>;
>> + };
>> + gpio9 {
>> + // UARTF_CTS_N - HW Pin 5
>> + gpio-export,name = "gpio9";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 9 0>;
>> + };
>> + gpio10 {
>> + // UARTF_RXD - HW Pin 9
>> + gpio-export,name = "gpio10";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 10 0>;
>> + };
>> + gpio11 {
>> + // UARTF_DTR_N - HW Pin 8
>> + gpio-export,name = "gpio11";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 11 0>;
>> + };
>> + gpio12 {
>> + // UARTF_DCD_N - HW Pin 12
>> + gpio-export,name = "gpio12";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 12 0>;
>> + };
>> + gpio13 {
>> + // UARTF_DSR_N - HW Pin 11
>> + gpio-export,name = "gpio13";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 13 0>;
>> + };
>> + gpio14 {
>> + // UARTF_RIN - HW Pin 7
>> + gpio-export,name = "gpio14";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 14 0>;
>> + };
>> +
>> + // UARTLITE - UART2
>> + gpio15 {
>> + // UART2_TXD - HW Pin 20
>> + gpio-export,name = "gpio15";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 15 0>;
>> + };
>> + gpio16 {
>> + // UART2_RXD - HW Pin 18
>> + gpio-export,name = "gpio16";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 16 0>;
>> + };
>> +
>> +*/
>> +/*
>> + // If you want to use this comment out the corrosponding
>> gpio-keys-polled
>> + gpio0 {
>> + // wps btn
>> + gpio-export,name = "gpio0";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 0 1>;
>> + };
>> +*/
>> +
>> + gpio19 {
>> + // SCM1
>> + gpio-export,name = "gpio19";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 19 1>;
>> + };
>> + gpio2 {
>> + // SCM2
>> + gpio-export,name = "gpio2";
>> + gpio-export,direction_may_change = <1>;
>> + gpios = <&gpio0 2 1>;
>> + };
>> +
>> + };
>> +
>> +
>> +
>> +
>> +
>> + gpio-leds {
>> + compatible = "gpio-leds";
>> + run {
>> + label = "wizfi630a::run";
>> + gpios = <&gpio0 1 1>;
>> + };
>> + uart1 {
>> + label = "wizfi630a::uart1";
>> + gpios = <&gpio0 18 1>;
>> + };
>> + uart2 {
>> + label = "wizfi630a::uart2";
>> + gpios = <&gpio0 21 1>;
>> + };
>> + wps {
>> + label = "wizfi630a::wps";
>> + gpios = <&gpio0 20 1>;
>> + };
>> + };
>> +
>> +
>> + gpio-keys-polled {
>> + compatible = "gpio-keys-polled";
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + poll-interval = <20>;
>> + reset {
>> + label = "reset";
>> + gpios = <&gpio0 17 1>;
>> + linux,code = <0x198>;
>> + };
>> +
>> + wps {
>> + label = "wps";
>> + gpios = <&gpio0 0 1>;
>> + linux,code = <0x211>;
>> + };
>> +/*
>> + // If you want to use this comment out the corrosponding export
>> + scm1 {
>> + label = "SCM1";
>> + gpios = <&gpio0 19 1>;
>> + linux,code = <0x100>;
>> + };
>> +
>> + scm2 {
>> + label = "SCM2";
>> + gpios = <&gpio0 2 1>;
>> + linux,code = <0x101>;
>> + };
>> +*/
>> +
>> + };
>> +
>> +
>> +};
>> diff --git a/target/linux/ramips/image/Makefile
>> b/target/linux/ramips/image/Makefile
>> index 409ff26..fbc6775 100644
>> --- a/target/linux/ramips/image/Makefile
>> +++ b/target/linux/ramips/image/Makefile
>> @@ -673,6 +673,8 @@ Image/Build/Profile/WNCE2001=$(call
>> BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WN
>>
>> Image/Build/Profile/WR512-3GN=$(call
>> BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
>>
>> +Image/Build/Profile/WIZFI630A=$(call
>> BuildFirmware/Default16M/$(1),$(1),wizfi630a,WIZFI630A)
>> +
>> Image/Build/Profile/WT1520=$(call
>> BuildFirmware/PorayDualSize/$(1),$(1),wt1520,WT1520)
>>
>> Image/Build/Profile/UR-326N4G=$(call
>> BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
>> @@ -761,6 +763,7 @@ define Image/Build/Profile/Default
>> $(call Image/Build/Profile/W306R_V20,$(1))
>> $(call Image/Build/Profile/W502U,$(1))
>> $(call Image/Build/Profile/WCR150GN,$(1))
>> + $(call Image/Build/Profile/WIZFI630A,$(1))
>> $(call Image/Build/Profile/WHRG300N,$(1))
>> $(call Image/Build/Profile/WIZARD8800,$(1))
>> $(call Image/Build/Profile/WL_330N,$(1))
>> diff --git a/target/linux/ramips/rt305x/profiles/wizfi630a.mk
>> b/target/linux/ramips/rt305x/profiles/wizfi630a.mk
>> new file mode 100644
>> index 0000000..22136b9
>> --- /dev/null
>> +++ b/target/linux/ramips/rt305x/profiles/wizfi630a.mk
>> @@ -0,0 +1,18 @@
>> +#
>> +# Copyright (C) 2014 OpenWrt.org
>> +#
>> +# This is free software, licensed under the GNU General Public License v2.
>> +# See /LICENSE for more information.
>> +#
>> +
>> +define Profile/WIZFI630A
>> + NAME:=WIZnet WizFi630A
>> + PACKAGES:=\
>> + kmod-usb-core kmod-usb-ohci kmod-usb2
>> +endef
>> +
>> +define Profile/WIZFI630A/Description
>> + Package set for WIZnet WizFi630A board
>> +endef
>> +
>> +$(eval $(call Profile,WIZFI630A))
>> --
>> 1.7.10.4
>>
>>
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list