[OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)

[John kerry]

Firstly i configure wireless config as below:

config wifi-device 'wifi0'
        option type 'qcawifi'
        option macaddr '00:01:11:00:01:00'
        option hwmode '11ng'
        option txpower '17'
        option htmode 'HT20'
        option disabled '0'
        option channel '1'

config wifi-iface
        option device 'wifi0'
        option mode 'ap'
        option ssid 'Testing_ap'
        option network 'lan'
        option encryption 'psk2'
        option key 'Testing_ap'

so its SSID was showing and able to connect any device to it.

Then i scan the device and connect to one of it. While joining the network
i selected Client(WDS) then the wireless config becomes like below:

config wifi-device 'wifi0'
        option type 'qcawifi'
        option macaddr '00:01:11:00:01:00'
        option hwmode '11ng'
        option txpower '17'
        option htmode 'HT20'
        option disabled '0'
        option channel '1'

config wifi-iface
        option network 'wwan'
        option ssid 'D_Link_Router'
        option encryption 'psk2'
        option device 'wifi0'
        option mode 'sta'
        option key 'Dlink_Router'
        option wds '1'

Then  i added one as shown in the video. Now its connected to router also
and this add one also showing so i can connect to this also.

But i am not getting how to keep this in default wireless config.

Because every time we cant add one to configure like this. It should be
like default should be in ap mode so any device we can connect, if its
connected to another router also that SSID still should be visible and able
to connect to this.


On Mon, Aug 10, 2015 at 2:57 PM, John kerry <kerry9842 at gmail.com> wrote:

> When i try to configure based on video, its shows 2 one as client another
> one as Master but i am not able to enable it . I mean to say wireless
> becomes disable. If i enable it using GUI also its not happening.
>
> On Mon, Aug 10, 2015 at 2:55 PM, David Lang <david at lang.hm> wrote:
>
>> What happens when you try to follow the video?
>>
>> Based on your comments, i'm guessing that things don't work when you try
>> and configure the second network and have it with a different SSID than the
>> first network that you put in client mode.
>>
>> Is this correct?
>>
>> David Lang
>>
>> On Mon, 10 Aug 2015, John kerry wrote:
>>
>> Yes, When i am connecting to Another router its changed to Client mode.
>>>
>>> Can i configure this in repeater mode like its shows in below link:
>>>
>>> https://www.youtube.com/watch?v=3rbsh2zxPnk
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150810/e6dcb81c/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel