[OpenWrt-Devel] [PATCH 0/3] ipq806x: add NAND flash support

[Mathieu Olivari]

This patch serie adds support for the integrated NAND flash controller
available on AP148. Most of the patches are backported from LKML, with
minor modifications.

This is kernel level support & enablement for now. Support for proper
MTD partitioning will come later and will be necessary to boot from
it.

Mathieu Olivari (3):
  ipq806x: Add ADM support
  ipq806x: add NAND flash controller support
  ipq806x: enable NAND flash support in the kernel

 target/linux/ipq806x/Makefile                      |    2 +-
 target/linux/ipq806x/config-3.18                   |   20 +
 target/linux/ipq806x/config-4.1                    |   18 +
 ...1-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch |    2 +-
 .../150-dmaengine-Rework-dma_chan_get.patch        |   70 +
 ...Remove-the-need-to-declare-device_control.patch |   27 +
 ...ake-channel-allocation-callbacks-optional.patch |   62 +
 ...engine-Introduce-a-device_config-callback.patch |   51 +
 ...aengine-Add-device_terminate_all-callback.patch |   47 +
 ...-bindings-qcom_adm-Fix-channel-specifiers.patch |   76 +
 .../156-dmaengine-Add-ADM-driver.patch             |  958 +++++++++
 .../157-ARM-DT-ipq8064-Add-ADM-device-node.patch   |   54 +
 .../160-clk-qcom-Add-EBI2-clocks-for-IPQ806x.patch |   74 +
 ...g-to-access-bad-block-markers-in-raw-mode.patch |   84 +
 ...-mtd-nand-Qualcomm-NAND-controller-driver.patch | 2024 ++++++++++++++++++++
 ...63-dt-bindings-qcom_nandc-Add-DT-bindings.patch |   82 +
 ...-dts-Add-NAND-controller-node-for-ipq806x.patch |   50 +
 ...nable-NAND-node-on-IPQ8064-AP148-platform.patch |   79 +
 ...dd-support-for-NSS-GMAC-clocks-and-resets.patch |   20 +-
 ...RM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch |   11 +-
 ...-qcom-add-gmac-nodes-to-ipq806x-platforms.patch |   10 +-
 ...-bindings-qcom_adm-Fix-channel-specifiers.patch |   76 +
 .../patches-4.1/156-dmaengine-Add-ADM-driver.patch |  962 ++++++++++
 .../157-ARM-DT-ipq8064-Add-ADM-device-node.patch   |   54 +
 ...g-to-access-bad-block-markers-in-raw-mode.patch |   84 +
 ...-mtd-nand-Qualcomm-NAND-controller-driver.patch | 2024 ++++++++++++++++++++
 ...63-dt-bindings-qcom_nandc-Add-DT-bindings.patch |   82 +
 ...-dts-Add-NAND-controller-node-for-ipq806x.patch |   50 +
 ...nable-NAND-node-on-IPQ8064-AP148-platform.patch |   76 +
 ...RM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch |   11 +-
 ...-qcom-add-gmac-nodes-to-ipq806x-platforms.patch |    7 +-
 31 files changed, 7218 insertions(+), 29 deletions(-)
 create mode 100644 target/linux/ipq806x/patches-3.18/150-dmaengine-Rework-dma_chan_get.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/151-dmaengine-Remove-the-need-to-declare-device_control.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/152-dmaengine-Make-channel-allocation-callbacks-optional.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/153-dmaengine-Introduce-a-device_config-callback.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/154-dmaengine-Add-device_terminate_all-callback.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/156-dmaengine-Add-ADM-driver.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/160-clk-qcom-Add-EBI2-clocks-for-IPQ806x.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/162-mtd-nand-Qualcomm-NAND-controller-driver.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
 create mode 100644 target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/155-dt-bindings-qcom_adm-Fix-channel-specifiers.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/156-dmaengine-Add-ADM-driver.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/157-ARM-DT-ipq8064-Add-ADM-device-node.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/161-mtd-nand-Create-a-BBT-flag-to-access-bad-block-markers-in-raw-mode.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/162-mtd-nand-Qualcomm-NAND-controller-driver.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/163-dt-bindings-qcom_nandc-Add-DT-bindings.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/164-arm-qcom-dts-Add-NAND-controller-node-for-ipq806x.patch
 create mode 100644 target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch

-- 
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel