[OpenWrt-Devel] Change OpenWrt Wifi default settings

[John kerry]

Hello Guys,

It's working. Thanks a lot to all of you :)

On Mon, Aug 3, 2015 at 10:43 AM, David Lang <david at lang.hm> wrote:

> The way to do this is to first forget about the factory reset problem and
> configure the AP to do what you want (including any encryption)
>
> then you can take the resulting file and put it into the build system so
> that it becomes the 'factory default' settings.
>
> Since you are not understanding how to configure the files from the
> documentation, configure them from the GUI and then look at the resulting
> files.
>
> David Lang
>
>
> On Mon, 3 Aug 2015, John kerry wrote:
>
> Hi All,
>>
>> I created separate files directory and added network and wireless files
>> and
>> its working everything but still i am not able to use encryption wpa2.
>> Below is the my script.
>> config wifi-device  wifi0
>>        option type     qcawifi
>>        option channel  auto
>>        option macaddr  00:03:7f:42:06:61
>>        option hwmode   11ng
>>        # REMOVE THIS LINE TO ENABLE WIFI:
>>        option disabled 0
>>
>> config wifi-iface
>>        option device   wifi0
>>        option network  lan
>>        option mode     ap
>>        option ssid     CD-1
>>        option encryption psk2
>>        option key      CD-1
>>
>> M I doing anything wrong?
>>
>> Thanks,
>>
>> On Mon, Aug 3, 2015 at 6:40 AM, David Lang <david at lang.hm> wrote:
>>
>> to make the config be there after a factory reset, you need to put the
>>> changes into the image that you build.
>>>
>>> you already did this for /etc/config/network, do the same thing for
>>> /etc/config/wireless
>>>
>>> David Lang
>>>
>>>
>>> On Sun, 2 Aug 2015, John kerry wrote:
>>>
>>> Hi Leiten,
>>>
>>>>
>>>> I have one issue, after upgrading this firmware it will load wireless
>>>> configuration with this changes, actually it should load when i do
>>>> factory
>>>> reset.
>>>>
>>>> Thanks,
>>>>
>>>> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9842 at gmail.com> wrote:
>>>>
>>>> Hi Leiten,
>>>>
>>>>>
>>>>> Thank you so much, Its working :)
>>>>>
>>>>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>>>>
>>>>> Hi,
>>>>>
>>>>>>
>>>>>> Don't answer to my e-mail only, you need to add openwrt-devel maillist
>>>>>> to
>>>>>> CC or just answer to CC, in each case I'll receive message but also
>>>>>> everyone could see all discussion.
>>>>>>
>>>>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
>>>>>> wrote:
>>>>>>
>>>>>> Hi Leiten,
>>>>>>>
>>>>>>> I have added new files under and written below :
>>>>>>> vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>>>>>
>>>>>>>
>>>>>> Use index in prefix of filename to set order of execution, so it'll be
>>>>>> like '99-wireless'.
>>>>>>
>>>>>>
>>>>>> #!/bin/sh
>>>>>>> #
>>>>>>> # Copyright (c) 2013 The Linux Foundation. All rights reserved.
>>>>>>> # Copyright (C) 2011 OpenWrt.org
>>>>>>> #
>>>>>>>
>>>>>>> [ -e /etc/config/wireless ] && exit 0
>>>>>>>
>>>>>>>
>>>>>> Here is the problem. When uci-defaults invoke scripts there's already
>>>>>> preconfiguration done and /etc/config/wireless already exists, so your
>>>>>> script just exit at this point. Remove this line.
>>>>>>
>>>>>>
>>>>>> touch /etc/config/wireless
>>>>>>>
>>>>>>> uci set wireless. at wifi-device[0].disabled=0;
>>>>>>> uci set system. at system[0].hostname=test_ap
>>>>>>> uci set wireless. at wifi-iface[0].mode=ap
>>>>>>> uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>>>>>> uci set wireless. at wifi-iface[0].encryption=none
>>>>>>> uci set wireless. at wifi-iface[0].wds=1
>>>>>>> uci set wireless.radio0.disabled=0
>>>>>>>
>>>>>>> uci commit wireless
>>>>>>>
>>>>>>> exit 0
>>>>>>>
>>>>>>> and compile the source code using make V=s but still not changed
>>>>>>> default
>>>>>>> settings.
>>>>>>>
>>>>>>> Please help me to make it works.
>>>>>>>
>>>>>>> Thanks,
>>>>>>>
>>>>>>>
>>>>>>> On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nickleiten at gmail.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>> You can also use uci-defaults mechanism for your purpose. Just put
>>>>>>>
>>>>>>>> script in base-files/etc/uci-defaults and set your preferrable
>>>>>>>> parameters with uci and don't forget to 'exit 0' at the end of
>>>>>>>> script,
>>>>>>>> in elsecase it'll be run every time at boot ruining changes.
>>>>>>>>
>>>>>>>> 2015-07-31 12:08 GMT+03:00 John kerry <kerry9842 at gmail.com>:
>>>>>>>>
>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>> I am working on Ar71xx openWRT Luci project. By default the Wi-Fi
>>>>>>>>> is
>>>>>>>>> disabled and SSID is OpenWrt. I need to change the default
>>>>>>>>> settings.
>>>>>>>>> Could anyone help me to change the default settings.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Best Regards,
>>>>>>>>> John
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>> openwrt-devel mailing list
>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>
>>>>>>>>> _______________________________________________
>>>>>>>>>
>>>>>>>> openwrt-devel mailing list
>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>
>>>>>>>> _______________________________________________
>>>>>>>>
>>>>>>> openwrt-devel mailing list
>>>>>> openwrt-devel at lists.openwrt.org
>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150803/571314b6/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel