[OpenWrt-Devel] Mount mmc block

[Baptiste Clenet]

2015-08-18 11:59 GMT+02:00 Baptiste Clenet <bapclenet at gmail.com>:
> Hi,
>
> I'm trying to mount a emmc block on /mnt/mmc on a Ralink MT7628 board:
>
> root at OpenWrt:/# ls /dev/mmcblk0p1
> /dev/mmcblk0p1
> root at OpenWrt:/# ls /mnt/mmc/
> root at OpenWrt:/# mount -t -ext3 /dev/mmcblk0p1 /mnt/mmc/
> mount: mounting /dev/mmcblk0p1 on /mnt/mmc/ failed: No such device
>
> Am I missing something here? /mnt/mmc and /dev/mmcblk0p1 both exist.
>
> Regards,
>
> --
> Baptiste

I'm using Kernel 4.1.0 btw.

I tried to find the filesystem of /dev/mmcblk0p1 with
root at OpenWrt:/# tune2fs -l /dev/mmcblk0p1
tune2fs 1.42.12 (29-Aug-2014)
tune2fs: Bad magic number in super-block while trying to open /dev/mmcblk0p1
Couldn't find valid filesystem superblock.

root at OpenWrt:/# fdisk
Disk /dev/mmcblk0: 3875 MB, 3875536896 bytes
235 heads, 20 sectors/track, 1610 cylinders
Units = cylinders of 4700 * 512 = 2406400 bytes

        Device Boot      Start         End      Blocks  Id System
/dev/mmcblk0p1               1        1610     3781632   6 FAT16


How may I mount this partition?


-- 
Baptiste
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel