[OpenWrt-Devel] [PATCH 3/3] ar71xx: add support for TP-Link TL-WDR6500 v2
Weijie Gao
hackpascal at gmail.com
Wed Aug 5 14:08:09 EDT 2015
Signed-off-by: Weijie Gao <hackpascal at gmail.com>
This patch adds support for TP-Link TL-WDR6500 v2.
The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for
the whole firmware, so I have to create a new firmware creation method.
---
target/linux/ar71xx/base-files/etc/diag.sh | 3 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 4 +
.../ar71xx/base-files/etc/uci-defaults/01_leds | 8 ++
.../ar71xx/base-files/etc/uci-defaults/02_network | 1 +
target/linux/ar71xx/base-files/lib/ar71xx.sh | 6 +
.../ar71xx/base-files/lib/upgrade/platform.sh | 11 +-
target/linux/ar71xx/config-4.1 | 1 +
.../files/arch/mips/ath79/mach-tl-wdr6500-v2.c | 141 +++++++++++++++++++++
target/linux/ar71xx/generic/profiles/tp-link.mk | 11 ++
target/linux/ar71xx/image/Makefile | 33 +++++
...PS-ath79-add-tplink-tl-wdr6500-v2-support.patch | 40 ++++++
11 files changed, 258 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
create mode 100644 target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index 561c5da..80f4ccd 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -286,6 +286,9 @@ get_status_led() {
tl-wr2543n)
status_led="tp-link:green:wps"
;;
+ tl-wdr6500-v2)
+ status_led="tp-link:white:system"
+ ;;
tube2h)
status_led="alfa:green:signal4"
;;
diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 7111630..a79643e 100644
--- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -54,6 +54,10 @@ case "$FIRMWARE" in
ath10kcal_extract "art" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -1)
;;
+ tl-wdr6500-v2)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) -2)
+ ;;
r6100)
ath10kcal_extract "caldata" 20480 2116
ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth1/address) +2)
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 2aced37..51c3b9a 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -439,6 +439,14 @@ tl-wdr4900-v2)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "tp-link:blue:wlan5g" "phy1tpt"
;;
+tl-wdr6500-v2)
+ ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1"
+ ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x02"
+ ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x04"
+ ucidef_set_led_switch "lan3" "LAN3" "tp-link:green:lan3" "switch0" "0x08"
+ ucidef_set_led_switch "lan4" "LAN4" "tp-link:green:lan4" "switch0" "0x10"
+ ;;
+
archer-c5|\
archer-c7)
ucidef_set_led_usbdev "usb1" "USB1" "tp-link:green:usb1" "1-1"
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
index 2893e62..d81145c 100755
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network
@@ -227,6 +227,7 @@ tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
tl-wr941nd-v5 |\
+tl-wdr6500-v2 |\
wnr2000-v3 |\
wnr2000-v4 |\
wnr2200 |\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 256bd10..b59ad96 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -240,6 +240,9 @@ tplink_board_detect() {
"49000002")
model="TP-Link TL-WDR4900"
;;
+ "65000002")
+ model="TP-Link TL-WDR6500"
+ ;;
"453000"*)
model="MERCURY MW4530R"
;;
@@ -766,6 +769,9 @@ ar71xx_board_detect() {
*"TL-WDR4900 v2")
name="tl-wdr4900-v2"
;;
+ *"TL-WDR6500 v2")
+ name="tl-wdr6500-v2"
+ ;;
*TL-WR741ND)
name="tl-wr741nd"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 76d8c5b..8d76cb3 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -340,6 +340,7 @@ platform_check_image() {
tl-wdr3500 | \
tl-wdr4300 | \
tl-wdr4900-v2 | \
+ tl-wdr6500-v2 | \
tl-wr703n | \
tl-wr710n | \
tl-wr720n-v3 | \
@@ -357,7 +358,15 @@ platform_check_image() {
tl-wr1043nd | \
tl-wr1043nd-v2 | \
tl-wr2543n)
- [ "$magic" != "0100" ] && {
+ local magic_ver="0100"
+
+ case "$board" in
+ tl-wdr6500-v2)
+ magic_ver="0200"
+ ;;
+ esac
+
+ [ "$magic" != "$magic_ver" ] && {
echo "Invalid image type."
return 1
}
diff --git a/target/linux/ar71xx/config-4.1 b/target/linux/ar71xx/config-4.1
index 1e31a01..341187c 100644
--- a/target/linux/ar71xx/config-4.1
+++ b/target/linux/ar71xx/config-4.1
@@ -122,6 +122,7 @@ CONFIG_ATH79_MACH_TL_WA901ND_V2=y
CONFIG_ATH79_MACH_TL_WAX50RE=y
CONFIG_ATH79_MACH_TL_WDR3500=y
CONFIG_ATH79_MACH_TL_WDR4300=y
+CONFIG_ATH79_MACH_TL_WDR6500_V2=y
CONFIG_ATH79_MACH_TL_WR1041N_V2=y
CONFIG_ATH79_MACH_TL_WR1043ND=y
CONFIG_ATH79_MACH_TL_WR1043ND_V2=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
new file mode 100644
index 0000000..aec336c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wdr6500-v2.c
@@ -0,0 +1,141 @@
+/*
+ * TP-LINK TL-WDR6500 v2
+ *
+ * Copyright (C) 2015 Weijie Gao <hackpascal at gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/platform_device.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include "common.h"
+#include "dev-eth.h"
+#include "dev-ap9x-pci.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+#include "pci.h"
+
+#define TL_WDR6500_V2_GPIO_LED_SYS 21
+#define TL_WDR6500_V2_GPIO_LED_WAN 18
+#define TL_WDR6500_V2_GPIO_LED_LAN1 17
+#define TL_WDR6500_V2_GPIO_LED_LAN2 16
+#define TL_WDR6500_V2_GPIO_LED_LAN3 15
+#define TL_WDR6500_V2_GPIO_LED_LAN4 14
+
+#define TL_WDR6500_V2_GPIO_BTN_RESET 1
+
+#define TL_WDR6500_V2_KEYS_POLL_INTERVAL 20 /* msecs */
+#define TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL (3 * TL_WDR6500_V2_KEYS_POLL_INTERVAL)
+
+#define TL_WDR6500_V2_WMAC_CALDATA_OFFSET 0x1000
+#define TL_WDR6500_V2_PCIE_CALDATA_OFFSET 0x5000
+
+static const char *tl_wdr6500_v2_part_probes[] = {
+ "tp-link-64k",
+ NULL,
+};
+
+static struct flash_platform_data tl_wdr6500_v2_flash_data = {
+ .part_probes = tl_wdr6500_v2_part_probes,
+};
+
+static struct gpio_led tl_wdr6500_v2_leds_gpio[] __initdata = {
+ {
+ .name = "tp-link:green:lan1",
+ .gpio = TL_WDR6500_V2_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan2",
+ .gpio = TL_WDR6500_V2_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan3",
+ .gpio = TL_WDR6500_V2_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:lan4",
+ .gpio = TL_WDR6500_V2_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:green:wan",
+ .gpio = TL_WDR6500_V2_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "tp-link:white:system",
+ .gpio = TL_WDR6500_V2_GPIO_LED_SYS,
+ .active_low = 0,
+ },
+};
+
+static struct gpio_keys_button tl_wdr6500_v2_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WDR6500_V2_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WDR6500_V2_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+
+static void __init tl_ap151_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0x1f00fc00);
+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+
+ ath79_register_m25p80(&tl_wdr6500_v2_flash_data);
+
+ ath79_setup_ar933x_phy4_switch(false, false);
+
+ ath79_register_mdio(0, 0x0);
+
+ /* WAN */
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_switch_data.phy_poll_mask = BIT(4);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.phy_mask = BIT(4);
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
+ ath79_register_eth(0);
+
+ /* LAN */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
+ ath79_register_eth(1);
+
+ ath79_init_mac(tmpmac, mac, -1);
+ ath79_register_wmac(ee + TL_WDR6500_V2_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_register_pci();
+
+ ath79_register_usb();
+}
+
+static void __init tl_wdr6500_v2_setup(void)
+{
+ tl_ap151_setup();
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wdr6500_v2_leds_gpio),
+ tl_wdr6500_v2_leds_gpio);
+
+ ath79_register_gpio_keys_polled(1, TL_WDR6500_V2_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wdr6500_v2_gpio_keys),
+ tl_wdr6500_v2_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WDR6500_V2, "TL-WDR6500-v2", "TP-LINK TL-WDR6500 v2",
+ tl_wdr6500_v2_setup);
diff --git a/target/linux/ar71xx/generic/profiles/tp-link.mk b/target/linux/ar71xx/generic/profiles/tp-link.mk
index 0174a43..05d1019 100644
--- a/target/linux/ar71xx/generic/profiles/tp-link.mk
+++ b/target/linux/ar71xx/generic/profiles/tp-link.mk
@@ -277,6 +277,17 @@ endef
$(eval $(call Profile,TLWDR4900V2))
+define Profile/TLWDR6500V2
+ NAME:=TP-LINK TL-WDR6500v2
+ PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev kmod-ath10k
+endef
+
+define Profile/TLWDR6500V2/Description
+ Package set optimized for the TP-LINK TL-WDR6500v2.
+endef
+$(eval $(call Profile,TLWDR6500V2))
+
+
define Profile/TLWR740
NAME:=TP-LINK TL-WR740N/ND
PACKAGES:=
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index e894d78..83042fa 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -1738,6 +1738,37 @@ define Image/Build/TPLINK-LZMA/initramfs
-o $(call imgname,$(1),$(2))-uImage.bin
endef
+Image/Build/TPLINK-64K/buildkernel=$(call PatchKernelLzma,$(2),$(3))
+
+define Image/Build/TPLINK-64K
+ -$(STAGING_DIR_HOST)/bin/mkimage \
+ -A mips -O linux -T kernel -a 0x80060000 -C lzma \
+ -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+ -d $$(KDIR_TMP)/vmlinux-$(2).bin.lzma $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) \
+ -X 0x20000 \
+ -k $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img \
+ -r $(KDIR)/root.$(1) \
+ -a $(call rootfs_align,$(1)) -j \
+ -o $(call factoryname,$(1),$(2))
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw \
+ -H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) -s \
+ -X 0x20000 \
+ -k $(KDIR_TMP)/vmlinux-$(2).bin.lzma.img \
+ -r $(KDIR)/root.$(1) \
+ -a $(call rootfs_align,$(1)) -j \
+ -o $(call sysupname,$(1),$(2))
+endef
+
+define Image/Build/TPLINK-64K/initramfs
+ $(call PatchKernelLzma,$(2),$(3),,-initramfs)
+ -$(STAGING_DIR_HOST)/bin/mktplinkfw -c \
+ -H $(4) -W $(5) -F $(6) -N OpenWrt -m 2 -V $(REVISION) $(7) -s \
+ -k $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.img \
+ -o $(call imgname,$(1),$(2))-uImage.bin
+endef
+
Image/Build/TPLINK-SAFELOADER/loader = $(call Image/BuildLoaderPatched,$(1),elf,$(2) $(3))
@@ -2166,6 +2197,8 @@ $(eval $(call SingleProfile,TPLINK,64kraw,TLWR1043V1,tl-wr1043nd-v1,TL-WR1043ND,
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR1043V2,tl-wr1043nd-v2,TL-WR1043ND-v2,ttyS0,115200,0x10430002,1,8M))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWR2543,tl-wr2543-v1,TL-WR2543N,ttyS0,115200,0x25430001,1,8Mlzma,-v 3.13.99))
+$(eval $(call SingleProfile,TPLINK-64K,64kraw,TLWDR6500V2,tl-wdr6500-v2,TL-WDR6500-v2,ttyS0,115200,0x65000002,1,8Mlzma))
+
$(eval $(call SingleProfile,TPLINK-SAFELOADER,64kraw,CPE510,cpe210-220-510-520,CPE510,ttyS0,115200,$$(cpe510_mtdlayout),CPE510))
$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N))
diff --git a/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch
new file mode 100644
index 0000000..9ddb740
--- /dev/null
+++ b/target/linux/ar71xx/patches-4.1/814-MIPS-ath79-add-tplink-tl-wdr6500-v2-support.patch
@@ -0,0 +1,40 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -1043,6 +1043,17 @@
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_TL_WDR6500_V2
++ bool "TP-LINK TL-WDR6500 v2 board support"
++ select SOC_QCA956X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_USB
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_TL_WR703N
+ bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
+ select SOC_AR933X
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -153,6 +153,7 @@
+ ATH79_MACH_TL_WA901ND_V3, /* TP-LINK TL-WA901ND v3 */
+ ATH79_MACH_TL_WDR3500, /* TP-LINK TL-WDR3500 */
+ ATH79_MACH_TL_WDR4300, /* TP-LINK TL-WDR4300 */
++ ATH79_MACH_TL_WDR6500_V2, /* TP-LINK TL-WDR6500 v2 */
+ ATH79_MACH_TL_WDR4900_V2, /* TP-LINK TL-WDR4900 v2 */
+ ATH79_MACH_TL_WR1041N_V2, /* TP-LINK TL-WR1041N v2 */
+ ATH79_MACH_TL_WR1043ND, /* TP-LINK TL-WR1043ND */
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -129,6 +129,7 @@
+ obj-$(CONFIG_ATH79_MACH_TL_WA901ND_V2) += mach-tl-wa901nd-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WDR3500) += mach-tl-wdr3500.o
+ obj-$(CONFIG_ATH79_MACH_TL_WDR4300) += mach-tl-wdr4300.o
++obj-$(CONFIG_ATH79_MACH_TL_WDR6500_V2) += mach-tl-wdr6500-v2.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR741ND) += mach-tl-wr741nd.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o
+ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V1) += mach-tl-wr841n.o
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list