[OpenWrt-Devel] [PATCH v2 07/25] ramips: fix Asus RT-N56U dts filename
Piotr Dymacz
pepe2k at gmail.com
Wed Aug 5 14:30:08 EDT 2015
Other Asus RT-N dts files are named "RT-N..." (not "RTN..."), so use the same for RT-N56U.
Signed-off-by: Piotr Dymacz <pepe2k at gmail.com>
---
target/linux/ramips/dts/RT-N56U.dts | 151 ++++++++++++++++++++++++++++++++++++
target/linux/ramips/dts/RTN56U.dts | 151 ------------------------------------
target/linux/ramips/image/Makefile | 4 +-
3 files changed, 153 insertions(+), 153 deletions(-)
create mode 100644 target/linux/ramips/dts/RT-N56U.dts
delete mode 100644 target/linux/ramips/dts/RTN56U.dts
diff --git a/target/linux/ramips/dts/RT-N56U.dts b/target/linux/ramips/dts/RT-N56U.dts
new file mode 100644
index 0000000..3ecd1b7
--- /dev/null
+++ b/target/linux/ramips/dts/RT-N56U.dts
@@ -0,0 +1,151 @@
+/dts-v1/;
+
+/include/ "rt3883.dtsi"
+
+/ {
+ compatible = "RT-N56U", "ralink,rt3883-soc";
+ model = "Asus RT-N56U";
+
+ palmbus at 10000000 {
+ gpio1: gpio at 638 {
+ status = "okay";
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "spi", "i2c", "jtag", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+
+ port at 0 {
+ ralink,fixed-link = <1000 1 1 1>;
+ };
+ };
+
+ pci at 10140000 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pci_pins>;
+
+ pci_pins: pci {
+ pci {
+ ralink,group = "pci";
+ ralink,function = "pci-fnc";
+ };
+ };
+
+ host-bridge {
+ pci-bridge at 1 {
+ status = "okay";
+
+ wmac at 0,0 {
+ compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
+ reg = < 0x10000 0 0 0 0 >;
+ ralink,eeprom = "rt2x00pci_1_0.eeprom";
+ };
+ };
+ };
+ };
+
+ wmac at 10180000 {
+ status = "okay";
+ ralink,2ghz = <0>;
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ nor-flash at 1c000000 {
+ compatible = "cfi-flash";
+ reg = <0x1c000000 0x800000>;
+ bank-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ reg = <0x0 0x0030000>;
+ label = "u-boot";
+ read-only;
+ };
+
+ partition at 30000 {
+ reg = <0x00030000 0x00010000>;
+ label = "u-boot-env";
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ reg = <0x00040000 0x00010000>;
+ label = "factory";
+ read-only;
+ };
+
+ partition at 50000 {
+ reg = <0x00050000 0x007b0000>;
+ label = "firmware";
+ };
+ };
+
+ rtl8367 {
+ compatible = "realtek,rtl8367";
+ gpio-sda = <&gpio0 1 0>;
+ gpio-sck = <&gpio0 2 0>;
+ realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 13 1>;
+ linux,code = <0x198>;
+ };
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 2 1>;
+ linux,code = <0x211>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "asus:blue:power";
+ gpios = <&gpio0 0 1>;
+ };
+
+ lan {
+ label = "asus:blue:lan";
+ gpios = <&gpio0 19 1>;
+ };
+
+ wan {
+ label = "asus:blue:wan";
+ gpios = <&gpio1 3 1>;
+ };
+
+ usb {
+ label = "asus:blue:usb";
+ gpios = <&gpio1 0 1>;
+ };
+ };
+};
diff --git a/target/linux/ramips/dts/RTN56U.dts b/target/linux/ramips/dts/RTN56U.dts
deleted file mode 100644
index 3ecd1b7..0000000
--- a/target/linux/ramips/dts/RTN56U.dts
+++ /dev/null
@@ -1,151 +0,0 @@
-/dts-v1/;
-
-/include/ "rt3883.dtsi"
-
-/ {
- compatible = "RT-N56U", "ralink,rt3883-soc";
- model = "Asus RT-N56U";
-
- palmbus at 10000000 {
- gpio1: gpio at 638 {
- status = "okay";
- };
- };
-
- pinctrl {
- state_default: pinctrl0 {
- gpio {
- ralink,group = "spi", "i2c", "jtag", "uartf";
- ralink,function = "gpio";
- };
- };
- };
-
- ethernet at 10100000 {
- mtd-mac-address = <&factory 0x4>;
-
- port at 0 {
- ralink,fixed-link = <1000 1 1 1>;
- };
- };
-
- pci at 10140000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pci_pins>;
-
- pci_pins: pci {
- pci {
- ralink,group = "pci";
- ralink,function = "pci-fnc";
- };
- };
-
- host-bridge {
- pci-bridge at 1 {
- status = "okay";
-
- wmac at 0,0 {
- compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
- reg = < 0x10000 0 0 0 0 >;
- ralink,eeprom = "rt2x00pci_1_0.eeprom";
- };
- };
- };
- };
-
- wmac at 10180000 {
- status = "okay";
- ralink,2ghz = <0>;
- ralink,mtd-eeprom = <&factory 0>;
- };
-
- ehci at 101c0000 {
- status = "okay";
- };
-
- ohci at 101c1000 {
- status = "okay";
- };
-
- nor-flash at 1c000000 {
- compatible = "cfi-flash";
- reg = <0x1c000000 0x800000>;
- bank-width = <2>;
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition at 0 {
- reg = <0x0 0x0030000>;
- label = "u-boot";
- read-only;
- };
-
- partition at 30000 {
- reg = <0x00030000 0x00010000>;
- label = "u-boot-env";
- read-only;
- };
-
- factory: partition at 40000 {
- reg = <0x00040000 0x00010000>;
- label = "factory";
- read-only;
- };
-
- partition at 50000 {
- reg = <0x00050000 0x007b0000>;
- label = "firmware";
- };
- };
-
- rtl8367 {
- compatible = "realtek,rtl8367";
- gpio-sda = <&gpio0 1 0>;
- gpio-sck = <&gpio0 2 0>;
- realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
- };
-
- gpio-keys-polled {
- compatible = "gpio-keys-polled";
- #address-cells = <1>;
- #size-cells = <0>;
- poll-interval = <100>;
-
- reset {
- label = "reset";
- gpios = <&gpio0 13 1>;
- linux,code = <0x198>;
- };
-
- wps {
- label = "wps";
- gpios = <&gpio1 2 1>;
- linux,code = <0x211>;
- };
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- power {
- label = "asus:blue:power";
- gpios = <&gpio0 0 1>;
- };
-
- lan {
- label = "asus:blue:lan";
- gpios = <&gpio0 19 1>;
- };
-
- wan {
- label = "asus:blue:wan";
- gpios = <&gpio1 3 1>;
- };
-
- usb {
- label = "asus:blue:usb";
- gpios = <&gpio1 0 1>;
- };
- };
-};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 232742c..5e749e6 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -819,12 +819,12 @@ omniembhpm_mtd_size=16449536
Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size))
define BuildFirmware/RTN56U/squashfs
- $(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U)
+ $(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RT-N56U)
-mkrtn56uimg -s $(call sysupname,$(1),rt-n56u)
-cp $(call sysupname,$(1),rt-n56u) $(call imgname,$(1),rt-n56u)-factory.bin
-mkrtn56uimg -f $(call imgname,$(1),rt-n56u)-factory.bin
endef
-Image/Build/Profile/RTN56U=$(call BuildFirmware/RTN56U/$(1),$(1),rt-n56u,RTN56U)
+Image/Build/Profile/RTN56U=$(call BuildFirmware/RTN56U/$(1),$(1),rt-n56u,RT-N56U)
Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910)
--
2.4.6
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list