[OpenWrt-Devel] Change OpenWrt Wifi default settings
John kerry
kerry9842 at gmail.com
Tue Aug 4 04:16:35 EDT 2015
Hi,
Using Script we can set both either 2.4GHz or 5Ghz using "*option hwmode
'11na*"
On Tue, Aug 4, 2015 at 4:13 PM, John kerry <kerry9842 at gmail.com> wrote:
> Hi,
>
> I have 2 radio's wifi0 and wifi1 but one is configured for 2.4GHz and
> another one is configured for 5GHz as below:
>
> [image: Inline image 1]
>
> First one i configured as below:
>
> [image: Inline image 2]
>
> wifi1 configured as below:
>
>
> [image: Inline image 3]
> mode configured as client and Network is WAN.
>
> Is this are correct?
>
> I have one doubts, both should be configured either 2.4GHz or 5GHz but for
> wifi1 in GUI there is no option to change to 2.4GHz.
>
> Thanks,
>
> On Tue, Aug 4, 2015 at 2:56 PM, David Lang <david at lang.hm> wrote:
>
>> you can't create a new radio with a script, you have to have a second
>> radio in the hardware.
>>
>> wifi0 is one radio, wifi1 is the second. configure one as an AP, the
>> other as a client (you probably want to make the client be part of the wan
>> interface/firewall group if it's your connection to the Internet)
>>
>> As I said before, since you don't understand how the configs work, I'd
>> suggest using the GUI to configure them and then look at what the resulting
>> file looks like. A lot of expertise went into making the GUI set the right
>> config options to make pretty complex things happen.
>>
>> David Lang
>>
>> On Tue, 4 Aug 2015, John kerry wrote:
>>
>> Date: Tue, 4 Aug 2015 14:41:38 +0800
>>> From: John kerry <kerry9842 at gmail.com>
>>> To: David Lang <david at lang.hm>
>>> Cc: Weedy <weedy2887 at gmail.com>, N. Leiten <nickleiten at gmail.com>,
>>> OpenWrt Development List <openwrt-devel at lists.openwrt.org>
>>> Subject: Re: [OpenWrt-Devel] Change OpenWrt Wifi default settings
>>>
>>> Hi,
>>>
>>> Yes i configured the mode as AP. could you please guide how i can add
>>> script for another radio.
>>>
>>> presently my wireless script is as below:
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *config wifi-device 'wifi0' option type 'qcawifi' option
>>> channel 'auto' option macaddr '00:03:7f:42:06:61' option
>>> hwmode '11ng' option txpower '19' option htmode
>>> 'HT20'config
>>> wifi-iface option device 'wifi0' option network 'lan'
>>> option mode 'ap' option encryption 'psk2' option ssid
>>> 'Test_ap_1' option key **'Test_ap_1'*
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *config wifi-device 'wifi1' option type 'qcawifi' option
>>> channel 'auto' option macaddr '00:03:7f:42:06:62' option
>>> hwmode '11na' option txpower '23' option htmode
>>> 'HT20'config
>>> wifi-iface option device 'wifi1' option network 'lan'
>>> option mode 'ap' option ssid 'Test_ap_2' option encryption
>>> 'psk2' option key 'test_ap_2'*
>>>
>>>
>>> *How i can change this to make it work.*
>>>
>>>
>>>
>>> *Thanks,*
>>>
>>> On Tue, Aug 4, 2015 at 2:26 PM, David Lang <david at lang.hm> wrote:
>>>
>>> A given radio can be either an AP or a client, but not both at once.
>>>>
>>>> so if you use a radio to connect to another AP, you are making it a
>>>> client, and in client mode all it can do is connect to that other AP as
>>>> shows up as the SSID of that other AP.
>>>>
>>>> you can do this with one radio, while using the other radio (assuming
>>>> you
>>>> have two) to act as an AP for local clients.
>>>>
>>>> David Lang
>>>>
>>>> On Tue, 4 Aug 2015, John kerry wrote:
>>>>
>>>> Hi,
>>>>
>>>>>
>>>>> Its working, i am able to access internet but there is one problem,
>>>>>
>>>>> When i scan the wireless devices, its gives the list of devices are
>>>>> there
>>>>> nearby, then i connect anyone device, it will connect but my board
>>>>> wifi0
>>>>> SSID name will change to that router which i connected. I mean LAN side
>>>>> SSID should not change after connecting to WAN SSID.
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Aug 4, 2015 at 12:42 PM, John kerry <kerry9842 at gmail.com>
>>>>> wrote:
>>>>>
>>>>> Hi
>>>>>
>>>>>> This is my firewall file:
>>>>>>
>>>>>> config defaults
>>>>>> option syn_flood '1'
>>>>>> option input 'ACCEPT'
>>>>>> option output 'ACCEPT'
>>>>>> option forward 'REJECT'
>>>>>>
>>>>>> config zone
>>>>>> option name 'lan'
>>>>>> option network 'lan'
>>>>>> option input 'ACCEPT'
>>>>>> option output 'ACCEPT'
>>>>>> option forward 'REJECT'
>>>>>>
>>>>>> config zone
>>>>>> option name 'wan'
>>>>>> option network 'wan'
>>>>>> option input 'REJECT'
>>>>>> option output 'ACCEPT'
>>>>>> option forward 'REJECT'
>>>>>> option masq '1'
>>>>>> option mtu_fix '1'
>>>>>>
>>>>>> config forwarding
>>>>>> option src 'lan'
>>>>>> option dest 'wan'
>>>>>>
>>>>>> config rule
>>>>>> option name 'Allow-DHCP-Renew'
>>>>>> option src 'wan'
>>>>>> option proto 'udp'
>>>>>> option dest_port '68'
>>>>>> option target 'ACCEPT'
>>>>>> option family 'ipv4'
>>>>>>
>>>>>> config rule
>>>>>> option name 'Allow-Ping'
>>>>>> option src 'wan'
>>>>>> option proto 'icmp'
>>>>>> option icmp_type 'echo-request'
>>>>>> option family 'ipv4'
>>>>>> option target 'ACCEPT'
>>>>>>
>>>>>> config rule
>>>>>> option name 'Allow-DHCPv6'
>>>>>> option src 'wan'
>>>>>> option proto 'udp'
>>>>>> option src_ip 'fe80::/10'
>>>>>> option src_port '547'
>>>>>> option dest_ip 'fe80::/10'
>>>>>> option dest_port '546'
>>>>>> option family 'ipv6'
>>>>>> option target 'ACCEPT'
>>>>>>
>>>>>> config rule
>>>>>> option name 'Allow-ICMPv6-Input'
>>>>>> option src 'wan'
>>>>>> option proto 'icmp'
>>>>>> list icmp_type 'echo-request'
>>>>>> list icmp_type 'echo-reply'
>>>>>> list icmp_type 'destination-unreachable'
>>>>>> list icmp_type 'packet-too-big'
>>>>>> list icmp_type 'time-exceeded'
>>>>>> list icmp_type 'bad-header'
>>>>>> list icmp_type 'unknown-header-type'
>>>>>> list icmp_type 'router-solicitation'
>>>>>> list icmp_type 'neighbour-solicitation'
>>>>>> list icmp_type 'router-advertisement'
>>>>>> list icmp_type 'neighbour-advertisement'
>>>>>> option limit '1000/sec'
>>>>>> option family 'ipv6'
>>>>>> option target 'ACCEPT'
>>>>>>
>>>>>> config rule
>>>>>> option name 'Allow-ICMPv6-Forward'
>>>>>> option src 'wan'
>>>>>> option dest '*'
>>>>>> option proto 'icmp'
>>>>>> list icmp_type 'echo-request'
>>>>>> list icmp_type 'echo-reply'
>>>>>> list icmp_type 'destination-unreachable'
>>>>>> list icmp_type 'packet-too-big'
>>>>>> list icmp_type 'time-exceeded'
>>>>>> list icmp_type 'bad-header'
>>>>>> list icmp_type 'unknown-header-type'
>>>>>> option limit '1000/sec'
>>>>>> option family 'ipv6'
>>>>>> option target 'ACCEPT'
>>>>>>
>>>>>> config include
>>>>>> option path '/etc/firewall.user'
>>>>>>
>>>>>> config include 'miniupnpd'
>>>>>> option type 'script'
>>>>>> option path '/usr/share/miniupnpd/firewall.include'
>>>>>> option family 'IPv4'
>>>>>> option reload '1'
>>>>>>
>>>>>> On Tue, Aug 4, 2015 at 12:38 PM, Weedy <weedy2887 at gmail.com> wrote:
>>>>>>
>>>>>> Is there something wrong with the default rules for your use case?
>>>>>>
>>>>>>>
>>>>>>> Your WiFi interfaces are tagged LAN, things should just work.
>>>>>>> On 4 Aug 2015 00:07, "John kerry" <kerry9842 at gmail.com> wrote:
>>>>>>>
>>>>>>> Hi,
>>>>>>>
>>>>>>>>
>>>>>>>> below is the /etc/config/network and /etc/config/wireless changes.
>>>>>>>>
>>>>>>>> */etc/config/network:*
>>>>>>>>
>>>>>>>> config interface 'loopback'
>>>>>>>> option ifname 'lo'
>>>>>>>> option proto 'static'
>>>>>>>> option ipaddr '127.0.0.1'
>>>>>>>> option netmask '255.0.0.0'
>>>>>>>>
>>>>>>>> config interface 'lan'
>>>>>>>> option ifname 'eth0.1 eth1'
>>>>>>>> option type 'bridge'
>>>>>>>> option proto 'static'
>>>>>>>> option ipaddr '192.168.1.5'
>>>>>>>> option netmask '255.255.255.0'
>>>>>>>>
>>>>>>>> config interface 'wan'
>>>>>>>> option ifname 'eth0.2'
>>>>>>>> option proto 'dhcp'
>>>>>>>>
>>>>>>>> config switch
>>>>>>>> option name 'eth0'
>>>>>>>> option reset '1'
>>>>>>>> option enable_vlan '1'
>>>>>>>>
>>>>>>>> config switch_vlan
>>>>>>>> option device 'eth0'
>>>>>>>> option vlan '1'
>>>>>>>> option ports '0t 2 3 4 5'
>>>>>>>>
>>>>>>>> config switch_vlan
>>>>>>>> option device 'eth0'
>>>>>>>> option vlan '2'
>>>>>>>> option ports '0t 1'
>>>>>>>>
>>>>>>>> config switch
>>>>>>>> option name 'eth1'
>>>>>>>> option reset '1'
>>>>>>>> option enable_vlan '1'
>>>>>>>>
>>>>>>>> config switch_vlan
>>>>>>>> option device 'eth1'
>>>>>>>> option vlan '1'
>>>>>>>> option ports '0 1 2 3 4 5'
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> */etc/config/wireless:config wifi-device 'wifi0' option type
>>>>>>>> 'qcawifi' option channel 'auto' option macaddr
>>>>>>>> '00:03:7f:42:06:61' option hwmode '11ng' option
>>>>>>>> txpower
>>>>>>>> '19' option htmode 'HT20'config wifi-iface option
>>>>>>>> device
>>>>>>>> 'wifi0' option network 'lan' option mode 'ap'
>>>>>>>> option
>>>>>>>> encryption 'psk2' option ssid 'Test_ap_1' option key *
>>>>>>>> *'Test_ap_1'*
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> *config wifi-device 'wifi1' option type 'qcawifi'
>>>>>>>> option
>>>>>>>> channel 'auto' option macaddr '00:03:7f:42:06:62'
>>>>>>>> option
>>>>>>>> hwmode '11na' option txpower '23' option htmode
>>>>>>>> 'HT20'config
>>>>>>>> wifi-iface option device 'wifi1' option network 'lan'
>>>>>>>> option mode 'ap' option ssid 'Test_ap_2' option
>>>>>>>> encryption
>>>>>>>> 'psk2' option key 'test_ap_2''*
>>>>>>>>
>>>>>>>>
>>>>>>>> *Thanks,*
>>>>>>>>
>>>>>>>>
>>>>>>>> On Tue, Aug 4, 2015 at 11:56 AM, David Lang <david at lang.hm> wrote:
>>>>>>>>
>>>>>>>> can you connect via a wired port?
>>>>>>>>
>>>>>>>>>
>>>>>>>>> given that you've been changing /etc/config/network and
>>>>>>>>> /etc/config/wireless, could you show us what you ended up with
>>>>>>>>> there?
>>>>>>>>>
>>>>>>>>> David Lang
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On Tue, 4 Aug 2015, John kerry wrote:
>>>>>>>>>
>>>>>>>>> Hi,
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>> I am using ar71xx OpenWrt. I have connected internet connection to
>>>>>>>>>> WAN
>>>>>>>>>> port
>>>>>>>>>> and my PC to LAN. I have enabled the WiFi0. The LAN port static
>>>>>>>>>> IP i
>>>>>>>>>> am
>>>>>>>>>> able to open GUI and even my mobile i connected to Wifi AP and
>>>>>>>>>> able
>>>>>>>>>> to
>>>>>>>>>> open
>>>>>>>>>> GUI in mobile. But I am not able to access internet on mobile
>>>>>>>>>> which
>>>>>>>>>> is
>>>>>>>>>> connected to wifi0 AP.
>>>>>>>>>>
>>>>>>>>>> I have added below script under /etc/firewall.user file.
>>>>>>>>>> iptables ...flush
>>>>>>>>>> iptables --table nat --flush
>>>>>>>>>> iptables --delete-chain
>>>>>>>>>> iptables --table nat --delete-chain
>>>>>>>>>> iptables -A FORWARD -j ACCEPT -i br-lan -o eth0.2 -m state --state
>>>>>>>>>> NEW
>>>>>>>>>> iptables -A FORWARD -m state --state ESTABLISHED,RELATED -j
>>>>>>>>>> ACCEPT
>>>>>>>>>> iptables -A POSTROUTING -t nat -o eth0.2 -j MASQUERADE
>>>>>>>>>> echo 1 > /proc/sys/net/ipv4/ip_forward
>>>>>>>>>>
>>>>>>>>>> #where br-lan = LAN
>>>>>>>>>> eth0.2 = WAN
>>>>>>>>>>
>>>>>>>>>> Could anyone help me to write the proper NAT rules so that able to
>>>>>>>>>> access
>>>>>>>>>> the internet.
>>>>>>>>>>
>>>>>>>>>> Thanks,
>>>>>>>>>>
>>>>>>>>>> On Mon, Aug 3, 2015 at 11:29 AM, John kerry <kerry9842 at gmail.com>
>>>>>>>>>> wrote:
>>>>>>>>>>
>>>>>>>>>> Hello Guys,
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>> It's working. Thanks a lot to all of you :)
>>>>>>>>>>>
>>>>>>>>>>> On Mon, Aug 3, 2015 at 10:43 AM, David Lang <david at lang.hm>
>>>>>>>>>>> wrote:
>>>>>>>>>>>
>>>>>>>>>>> The way to do this is to first forget about the factory reset
>>>>>>>>>>> problem
>>>>>>>>>>>
>>>>>>>>>>> and
>>>>>>>>>>>> configure the AP to do what you want (including any encryption)
>>>>>>>>>>>>
>>>>>>>>>>>> then you can take the resulting file and put it into the build
>>>>>>>>>>>> system so
>>>>>>>>>>>> that it becomes the 'factory default' settings.
>>>>>>>>>>>>
>>>>>>>>>>>> Since you are not understanding how to configure the files from
>>>>>>>>>>>> the
>>>>>>>>>>>> documentation, configure them from the GUI and then look at the
>>>>>>>>>>>> resulting
>>>>>>>>>>>> files.
>>>>>>>>>>>>
>>>>>>>>>>>> David Lang
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> On Mon, 3 Aug 2015, John kerry wrote:
>>>>>>>>>>>>
>>>>>>>>>>>> Hi All,
>>>>>>>>>>>>
>>>>>>>>>>>>
>>>>>>>>>>>> I created separate files directory and added network and
>>>>>>>>>>>>> wireless
>>>>>>>>>>>>> files
>>>>>>>>>>>>> and
>>>>>>>>>>>>> its working everything but still i am not able to use
>>>>>>>>>>>>> encryption
>>>>>>>>>>>>> wpa2.
>>>>>>>>>>>>> Below is the my script.
>>>>>>>>>>>>> config wifi-device wifi0
>>>>>>>>>>>>> option type qcawifi
>>>>>>>>>>>>> option channel auto
>>>>>>>>>>>>> option macaddr 00:03:7f:42:06:61
>>>>>>>>>>>>> option hwmode 11ng
>>>>>>>>>>>>> # REMOVE THIS LINE TO ENABLE WIFI:
>>>>>>>>>>>>> option disabled 0
>>>>>>>>>>>>>
>>>>>>>>>>>>> config wifi-iface
>>>>>>>>>>>>> option device wifi0
>>>>>>>>>>>>> option network lan
>>>>>>>>>>>>> option mode ap
>>>>>>>>>>>>> option ssid CD-1
>>>>>>>>>>>>> option encryption psk2
>>>>>>>>>>>>> option key CD-1
>>>>>>>>>>>>>
>>>>>>>>>>>>> M I doing anything wrong?
>>>>>>>>>>>>>
>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>
>>>>>>>>>>>>> On Mon, Aug 3, 2015 at 6:40 AM, David Lang <david at lang.hm>
>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>
>>>>>>>>>>>>> to make the config be there after a factory reset, you need to
>>>>>>>>>>>>> put
>>>>>>>>>>>>> the
>>>>>>>>>>>>>
>>>>>>>>>>>>> changes into the image that you build.
>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> you already did this for /etc/config/network, do the same
>>>>>>>>>>>>>> thing
>>>>>>>>>>>>>> for
>>>>>>>>>>>>>> /etc/config/wireless
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> David Lang
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> On Sun, 2 Aug 2015, John kerry wrote:
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> Hi Leiten,
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>
>>>>>>>>>>>>>> I have one issue, after upgrading this firmware it will load
>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> wireless
>>>>>>>>>>>>>>> configuration with this changes, actually it should load
>>>>>>>>>>>>>>> when i
>>>>>>>>>>>>>>> do
>>>>>>>>>>>>>>> factory
>>>>>>>>>>>>>>> reset.
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <
>>>>>>>>>>>>>>> kerry9842 at gmail.com
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Hi Leiten,
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>> Thank you so much, Its working :)
>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <
>>>>>>>>>>>>>>>> nickleiten at gmail.com
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>> Don't answer to my e-mail only, you need to add
>>>>>>>>>>>>>>>> openwrt-devel
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> maillist
>>>>>>>>>>>>>>>>> to
>>>>>>>>>>>>>>>>> CC or just answer to CC, in each case I'll receive message
>>>>>>>>>>>>>>>>> but
>>>>>>>>>>>>>>>>> also
>>>>>>>>>>>>>>>>> everyone could see all discussion.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user
>>>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>>>> kerry
>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> Hi Leiten,
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> I have added new files under and written below :
>>>>>>>>>>>>>>>>>> vi
>>>>>>>>>>>>>>>>>> target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Use index in prefix of filename to set order of
>>>>>>>>>>>>>>>>>> execution, so
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> it'll
>>>>>>>>>>>>>>>>> be
>>>>>>>>>>>>>>>>> like '99-wireless'.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> #!/bin/sh
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> # Copyright (c) 2013 The Linux Foundation. All rights
>>>>>>>>>>>>>>>>>> reserved.
>>>>>>>>>>>>>>>>>> # Copyright (C) 2011 OpenWrt.org
>>>>>>>>>>>>>>>>>> #
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> [ -e /etc/config/wireless ] && exit 0
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Here is the problem. When uci-defaults invoke scripts
>>>>>>>>>>>>>>>>>> there's
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> already
>>>>>>>>>>>>>>>>> preconfiguration done and /etc/config/wireless already
>>>>>>>>>>>>>>>>> exists,
>>>>>>>>>>>>>>>>> so
>>>>>>>>>>>>>>>>> your
>>>>>>>>>>>>>>>>> script just exit at this point. Remove this line.
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> touch /etc/config/wireless
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> uci set wireless. at wifi-device[0].disabled=0;
>>>>>>>>>>>>>>>>>> uci set system. at system[0].hostname=test_ap
>>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].mode=ap
>>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].encryption=none
>>>>>>>>>>>>>>>>>> uci set wireless. at wifi-iface[0].wds=1
>>>>>>>>>>>>>>>>>> uci set wireless.radio0.disabled=0
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> uci commit wireless
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> exit 0
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> and compile the source code using make V=s but still not
>>>>>>>>>>>>>>>>>> changed
>>>>>>>>>>>>>>>>>> default
>>>>>>>>>>>>>>>>>> settings.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Please help me to make it works.
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> Thanks,
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <
>>>>>>>>>>>>>>>>>> nickleiten at gmail.com
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> wrote:
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> You can also use uci-defaults mechanism for your purpose.
>>>>>>>>>>>>>>>>>> Just
>>>>>>>>>>>>>>>>>> put
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> script in base-files/etc/uci-defaults and set your
>>>>>>>>>>>>>>>>>> preferrable
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> parameters with uci and don't forget to 'exit 0' at the
>>>>>>>>>>>>>>>>>>> end
>>>>>>>>>>>>>>>>>>> of
>>>>>>>>>>>>>>>>>>> script,
>>>>>>>>>>>>>>>>>>> in elsecase it'll be run every time at boot ruining
>>>>>>>>>>>>>>>>>>> changes.
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> 2015-07-31 12:08 GMT+03:00 John kerry <
>>>>>>>>>>>>>>>>>>> kerry9842 at gmail.com
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> :
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> Hi,
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> I am working on Ar71xx openWRT Luci project. By default
>>>>>>>>>>>>>>>>>>>> the
>>>>>>>>>>>>>>>>>>>> Wi-Fi
>>>>>>>>>>>>>>>>>>>> is
>>>>>>>>>>>>>>>>>>>> disabled and SSID is OpenWrt. I need to change the
>>>>>>>>>>>>>>>>>>>> default
>>>>>>>>>>>>>>>>>>>> settings.
>>>>>>>>>>>>>>>>>>>> Could anyone help me to change the default settings.
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> Best Regards,
>>>>>>>>>>>>>>>>>>>> John
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> _______________________________________________
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>> openwrt-devel mailing list
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>> openwrt-devel at lists.openwrt.org
>>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>>>>>>
>>>>>>>>>>>
>>>>>>>>
>>>>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/3a840d58/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 30644 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/3a840d58/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 33862 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/3a840d58/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 23184 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150804/3a840d58/attachment-0002.png>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list