[OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple Wi-Fi client/AP interfaces on one radio)

[David Lang]

On Mon, 10 Aug 2015, John kerry wrote:

> I followed the same steps and its working too. But this i want in wireless
> config file, Because i dont want every time to add using GUI. So When i
> connect to another router also, no need to add one more. I mean to say it
> should be in default wireless config file.

what do you mean by "default wireless config file"

Once you have set it from the GUI, it is in the config files. The next time you 
boot it will use that config.

If you mean that you want it in the factory default config (for when you first 
flash the router or do a factory reset), then take the /etc/config/wireless and 
/etc/config/network files and add them to your build under /files

David Lang

> On Mon, Aug 10, 2015 at 6:18 PM, David Lang <david at lang.hm> wrote:
>
>> On Mon, 10 Aug 2015, John kerry wrote:
>>
>> Date: Mon, 10 Aug 2015 18:10:14 +0800
>>> From: John kerry <kerry9842 at gmail.com>
>>> To: Alex Weedy <weedy2887 at gmail.com>,
>>>     OpenWrt Development List <openwrt-devel at lists.openwrt.org>
>>> Subject: [OpenWrt-Devel] Fwd: "3-address Wi-Fi bridging" (was: Multiple
>>> Wi-Fi
>>>     client/AP interfaces on one radio)
>>>
>>> Firstly i configure wireless config as below:
>>>
>>> config wifi-device 'wifi0'
>>>        option type 'qcawifi'
>>>        option macaddr '00:01:11:00:01:00'
>>>        option hwmode '11ng'
>>>        option txpower '17'
>>>        option htmode 'HT20'
>>>        option disabled '0'
>>>        option channel '1'
>>>
>>> config wifi-iface
>>>        option device 'wifi0'
>>>        option mode 'ap'
>>>        option ssid 'Testing_ap'
>>>        option network 'lan'
>>>        option encryption 'psk2'
>>>        option key 'Testing_ap'
>>>
>>> so its SSID was showing and able to connect any device to it.
>>>
>>> Then i scan the device and connect to one of it. While joining the network
>>> i selected Client(WDS) then the wireless config becomes like below:
>>>
>>
>> why don't you try following the steps in the video that you posted.
>>
>> first connect as a client, then add an additional interface and make the
>> second interface the AP for things to connect to.
>>
>> the order may make a difference.
>>
>> David Lang
>>
>>
>> config wifi-device 'wifi0'
>>>        option type 'qcawifi'
>>>        option macaddr '00:01:11:00:01:00'
>>>        option hwmode '11ng'
>>>        option txpower '17'
>>>        option htmode 'HT20'
>>>        option disabled '0'
>>>        option channel '1'
>>>
>>> config wifi-iface
>>>        option network 'wwan'
>>>        option ssid 'D_Link_Router'
>>>        option encryption 'psk2'
>>>        option device 'wifi0'
>>>        option mode 'sta'
>>>        option key 'Dlink_Router'
>>>        option wds '1'
>>>
>>> Then  i added one as shown in the video. Now its connected to router also
>>> and this add one also showing so i can connect to this also.
>>>
>>> But i am not getting how to keep this in default wireless config.
>>>
>>> Because every time we cant add one to configure like this. It should be
>>> like default should be in ap mode so any device we can connect, if its
>>> connected to another router also that SSID still should be visible and
>>> able
>>> to connect to this.
>>>
>>
>>
>>
>>> On Mon, Aug 10, 2015 at 2:57 PM, John kerry <kerry9842 at gmail.com> wrote:
>>>
>>> When i try to configure based on video, its shows 2 one as client another
>>>> one as Master but i am not able to enable it . I mean to say wireless
>>>> becomes disable. If i enable it using GUI also its not happening.
>>>>
>>>> On Mon, Aug 10, 2015 at 2:55 PM, David Lang <david at lang.hm> wrote:
>>>>
>>>> What happens when you try to follow the video?
>>>>>
>>>>> Based on your comments, i'm guessing that things don't work when you try
>>>>> and configure the second network and have it with a different SSID than
>>>>> the
>>>>> first network that you put in client mode.
>>>>>
>>>>> Is this correct?
>>>>>
>>>>> David Lang
>>>>>
>>>>> On Mon, 10 Aug 2015, John kerry wrote:
>>>>>
>>>>> Yes, When i am connecting to Another router its changed to Client mode.
>>>>>
>>>>>>
>>>>>> Can i configure this in repeater mode like its shows in below link:
>>>>>>
>>>>>> https://www.youtube.com/watch?v=3rbsh2zxPnk
>>>>>>
>>>>>>
>>>>>
>>>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
>>
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel