[OpenWrt-Devel] Change OpenWrt Wifi default settings

[John kerry]

Hi Leiten,

I have one issue, after upgrading this firmware it will load wireless
configuration with this changes, actually it should load when i do factory
reset.

Thanks,

On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9842 at gmail.com> wrote:

> Hi Leiten,
>
> Thank you so much, Its working :)
>
> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nickleiten at gmail.com> wrote:
>
>> Hi,
>>
>> Don't answer to my e-mail only, you need to add openwrt-devel maillist to
>> CC or just answer to CC, in each case I'll receive message but also
>> everyone could see all discussion.
>>
>> In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
>> wrote:
>> > Hi Leiten,
>> >
>> > I have added new files under and written below :
>> > vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>
>> Use index in prefix of filename to set order of execution, so it'll be
>> like '99-wireless'.
>>
>> >
>> > #!/bin/sh
>> > #
>> > # Copyright (c) 2013 The Linux Foundation. All rights reserved.
>> > # Copyright (C) 2011 OpenWrt.org
>> > #
>> >
>> > [ -e /etc/config/wireless ] && exit 0
>>
>> Here is the problem. When uci-defaults invoke scripts there's already
>> preconfiguration done and /etc/config/wireless already exists, so your
>> script just exit at this point. Remove this line.
>>
>> >
>> > touch /etc/config/wireless
>> >
>> > uci set wireless. at wifi-device[0].disabled=0;
>> > uci set system. at system[0].hostname=test_ap
>> > uci set wireless. at wifi-iface[0].mode=ap
>> > uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>> > uci set wireless. at wifi-iface[0].encryption=none
>> > uci set wireless. at wifi-iface[0].wds=1
>> > uci set wireless.radio0.disabled=0
>> >
>> > uci commit wireless
>> >
>> > exit 0
>> >
>> > and compile the source code using make V=s but still not changed default
>> > settings.
>> >
>> > Please help me to make it works.
>> >
>> > Thanks,
>> >
>> >
>> > On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nickleiten at gmail.com> wrote:
>> >
>> > > You can also use uci-defaults mechanism for your purpose. Just put
>> > > script in base-files/etc/uci-defaults and set your preferrable
>> > > parameters with uci and don't forget to 'exit 0' at the end of script,
>> > > in elsecase it'll be run every time at boot ruining changes.
>> > >
>> > > 2015-07-31 12:08 GMT+03:00 John kerry <kerry9842 at gmail.com>:
>> > > > Hi,
>> > > >
>> > > > I am working on Ar71xx openWRT Luci project. By default the Wi-Fi is
>> > > > disabled and SSID is OpenWrt. I need to change the default settings.
>> > > > Could anyone help me to change the default settings.
>> > > >
>> > > >
>> > > > Best Regards,
>> > > > John
>> > > >
>> > > > _______________________________________________
>> > > > openwrt-devel mailing list
>> > > > openwrt-devel at lists.openwrt.org
>> > > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> > > >
>> > > _______________________________________________
>> > > openwrt-devel mailing list
>> > > openwrt-devel at lists.openwrt.org
>> > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>> > >
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150802/63367f8e/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel