[OpenWrt-Devel] Change OpenWrt Wifi default settings

[John kerry]

Hi,

I am using below uci script,

vi target/linux/ar71xx/base-files/etc/uci-defaults/99-wireless

#copyright (c) 2013 The Linux Foundation. All rights reserved.
# Copyright (C) 2011 OpenWrt.org
#


touch /etc/config/wireless

uci set wireless. at wifi-device[0].disabled=0;
uci set system. at system[0].hostname=OpenWrt
uci set wireless. at wifi-iface[0].mode=ap
uci set wireless. at wifi-iface[0].ssid=Home_plug_1
uci set wireless. at wifi-iface[0].encryption=wpa2
uci set wireless. at wifi-iface[0].key="Home_plug_1"
#uci set wireless.radio0.disabled=0

uci set wireless. at wifi-device[1].disabled=0;
uci set wireless. at wifi-iface[1].mode=ap
uci set wireless. at wifi-iface[1].ssid=Home_plug_2
uci set wireless. at wifi-iface[1].encryption=wpa2
uci set wireless. at wifi-iface[1].key="Home_plug_2"
#uci set wireless.radio0.disabled=0


uci commit wireless

exit 0

The default SSID is working but not able to set encryption type and key.

Thanks,


On Sun, Aug 2, 2015 at 9:19 PM, John kerry <kerry9842 at gmail.com> wrote:

> Hi Leiten,
>
> I have one issue, after upgrading this firmware it will load wireless
> configuration with this changes, actually it should load when i do factory
> reset.
>
> Thanks,
>
> On Sun, Aug 2, 2015 at 3:45 PM, John kerry <kerry9842 at gmail.com> wrote:
>
>> Hi Leiten,
>>
>> Thank you so much, Its working :)
>>
>> On Sun, Aug 2, 2015 at 3:12 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>
>>> Hi,
>>>
>>> Don't answer to my e-mail only, you need to add openwrt-devel maillist
>>> to CC or just answer to CC, in each case I'll receive message but also
>>> everyone could see all discussion.
>>>
>>> In email dated Воскресенье - 02 августа 2015 12:54:32 user John kerry
>>> wrote:
>>> > Hi Leiten,
>>> >
>>> > I have added new files under and written below :
>>> > vi target/linux/ar71xx/base-files/etc/uci-defaults/wireless
>>>
>>> Use index in prefix of filename to set order of execution, so it'll be
>>> like '99-wireless'.
>>>
>>> >
>>> > #!/bin/sh
>>> > #
>>> > # Copyright (c) 2013 The Linux Foundation. All rights reserved.
>>> > # Copyright (C) 2011 OpenWrt.org
>>> > #
>>> >
>>> > [ -e /etc/config/wireless ] && exit 0
>>>
>>> Here is the problem. When uci-defaults invoke scripts there's already
>>> preconfiguration done and /etc/config/wireless already exists, so your
>>> script just exit at this point. Remove this line.
>>>
>>> >
>>> > touch /etc/config/wireless
>>> >
>>> > uci set wireless. at wifi-device[0].disabled=0;
>>> > uci set system. at system[0].hostname=test_ap
>>> > uci set wireless. at wifi-iface[0].mode=ap
>>> > uci set wireless. at wifi-iface[0].ssid=CD-2.4D
>>> > uci set wireless. at wifi-iface[0].encryption=none
>>> > uci set wireless. at wifi-iface[0].wds=1
>>> > uci set wireless.radio0.disabled=0
>>> >
>>> > uci commit wireless
>>> >
>>> > exit 0
>>> >
>>> > and compile the source code using make V=s but still not changed
>>> default
>>> > settings.
>>> >
>>> > Please help me to make it works.
>>> >
>>> > Thanks,
>>> >
>>> >
>>> > On Sat, Aug 1, 2015 at 4:38 PM, N.Leiten <nickleiten at gmail.com> wrote:
>>> >
>>> > > You can also use uci-defaults mechanism for your purpose. Just put
>>> > > script in base-files/etc/uci-defaults and set your preferrable
>>> > > parameters with uci and don't forget to 'exit 0' at the end of
>>> script,
>>> > > in elsecase it'll be run every time at boot ruining changes.
>>> > >
>>> > > 2015-07-31 12:08 GMT+03:00 John kerry <kerry9842 at gmail.com>:
>>> > > > Hi,
>>> > > >
>>> > > > I am working on Ar71xx openWRT Luci project. By default the Wi-Fi
>>> is
>>> > > > disabled and SSID is OpenWrt. I need to change the default
>>> settings.
>>> > > > Could anyone help me to change the default settings.
>>> > > >
>>> > > >
>>> > > > Best Regards,
>>> > > > John
>>> > > >
>>> > > > _______________________________________________
>>> > > > openwrt-devel mailing list
>>> > > > openwrt-devel at lists.openwrt.org
>>> > > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>> > > >
>>> > > _______________________________________________
>>> > > openwrt-devel mailing list
>>> > > openwrt-devel at lists.openwrt.org
>>> > > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>> > >
>>> _______________________________________________
>>> openwrt-devel mailing list
>>> openwrt-devel at lists.openwrt.org
>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150803/cefb4e39/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel