April 2016 Archives by date

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...

Starting: Fri Apr 1 02:59:20 EDT 2016
Ending: Sat Apr 30 13:48:23 EDT 2016
Messages: 525

• [OpenWrt-Devel] [PATCH] ramips: rt3352 usbphy fix in dts-file   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] download: add @GITHUB download facility   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcmfmac43430-firmware: switch to @GITHUB download alias   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 0/8] [ipq806x] Add basic support for Linksys EA8500   Imre Kaloz
• [OpenWrt-Devel] [RFC 1/2] Add support for the apm821xx Device Target   Imre Kaloz
• [OpenWrt-Devel] [RFC 2/2] Add support for the Meraki MR24   Imre Kaloz
• [OpenWrt-Devel] [RFC] ar71xx: Reset QCA955x SGMII link on speed change   Sven Eckelmann
• [OpenWrt-Devel] [RFC 1/2] Add support for the apm821xx Device Target   Chris Blake
• [OpenWrt-Devel] [RFC 1/2] Add support for the apm821xx Device Target   Imre Kaloz
• [OpenWrt-Devel] [PATCH v2] ramips: rt3352 usbphy fix in dts-file   serge
• [OpenWrt-Devel] [PATCH] arc770: build kmod-ath9k-htc wpad-mini by default   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] arc770: enable unaligned access handling simulation in software   Alexey Brodkin
• [OpenWrt-Devel] [RFC 2/2] Add support for the Meraki MR24   Chris Blake
• [OpenWrt-Devel] [PATCH 4/8] caldata-utils: new package to manipulate ath10k   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 4/8] caldata-utils: new package to manipulate ath10k   Adrian Panella
• [OpenWrt-Devel] [PATCH 0/8] [ipq806x] Add basic support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH] kernel: remove full cache flush in fuse_copy_do() for MIPS   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] CC:ar71xx: backport support for Netgear WPN824N   Hartmut Knaack
• [OpenWrt-Devel] [PATCH 0/8] [ipq806x] Add basic support for Linksys EA8500   Imre Kaloz
• [OpenWrt-Devel] Fwd: [RFC 1/2] Add support for the apm821xx Device Target   Chris Blake
• [OpenWrt-Devel] [PATCH] ramips: fix for Planex MZK-WDPR (lcd control gpio).   YuheiOKAWA
• [OpenWrt-Devel] syn_flood v/s synflood_protect in firewall default config   Damian Kaczkowski
• [OpenWrt-Devel] [PATCH] ar71xx: fix nondeterministic hangs during bootconsole/console handover   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 0/8] [ipq806x] Add basic support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 1/5] ramips: mt7621: fix initramfs image for ubnt-erx   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/5] ramips: mt7621: add a device to TARGET_DEVICES after it's definition   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 3/5] ramips: enable device profiling by dts   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 4/5] ramips: mt7621: sync MQmaker WiTi profile name to dts name   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 5/5] ramips: mt7621: fix Ubiquiti EdgeRouter X profile   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 0/2] Add support for a apm821xx target & the Cisco Meraki MR24   Chris Blake
• [OpenWrt-Devel] [PATCH 1/2] Add support for the apm821xx Device Target   Chris Blake
• [OpenWrt-Devel] [PATCH 2/2] Add support for the Cisco Meraki MR24   Chris Blake
• [OpenWrt-Devel] [PATCH 0/8] [ipq806x] Add basic support for Linksys EA8500   Rafał Miłecki
• [OpenWrt-Devel] [RFC] ar71xx: Reset QCA955x SGMII link on speed change   Sven Eckelmann
• [OpenWrt-Devel] ramips: Disable the SD driver by default on MT7621   Daniel Engberg
• [OpenWrt-Devel] [RFC] ar71xx: Reset QCA955x SGMII link on speed change   Sven Eckelmann
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Saverio Proto
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Bruno Randolf
• [OpenWrt-Devel] [PATCH 0/2] Fix PCI for cns3xxx platform   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 1/2] cns3xxx: backport pci fix for cns3xxx_write_config   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 2/2] cns3xxx: set both MPS 'and' MRSS to 128   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] Fixes for LinkIt 7688   Adam Kent
• [OpenWrt-Devel] [PATCH 0/3] kirkwood: Use new UBI image style for Iconnect   Wojciech Dubowik
• [OpenWrt-Devel] [PATCH 1/3] uboot-kirkwood: New ubi flash format for Iconnect   Wojciech Dubowik
• [OpenWrt-Devel] [PATCH 2/3] kirkwood: Migrate Iconnect to new ubi image format   Wojciech Dubowik
• [OpenWrt-Devel] [PATCH 3/3] krikwood: Make Iconnect image use new ubi format style   Wojciech Dubowik
• [OpenWrt-Devel] *****SPAM***** Fw: new important message   openwrt-devel-bounces at lists.openwrt.org
• [OpenWrt-Devel] [RFC v2 1/6] ar71xx: Save in ag71xx_platform_data if SoC is qca955x   Sven Eckelmann
• [OpenWrt-Devel] [RFC v2 2/6] ar71xx: Save GMAC id in ag71xx_platform_data   Sven Eckelmann
• [OpenWrt-Devel] [RFC v2 3/6] ar71xx: Fix size of the QCA955x GMAC registers   Sven Eckelmann
• [OpenWrt-Devel] [RFC v2 4/6] ar71xx: Add QCA955X SGMII related GMAC register definitions   Sven Eckelmann
• [OpenWrt-Devel] [RFC v2 5/6] ag71xx: Disable classification of fragmented packets on QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [RFC v2 6/6] ar71xx: Reset QCA955x SGMII link on speed change   Sven Eckelmann
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Saverio Proto
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   John Crispin
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Bruno Randolf
• [OpenWrt-Devel] [PATCH] ramips: mt7621: add support for disabling flow control   Cristian Morales Vega
• [OpenWrt-Devel] [PATCH 01/16] scripts/om-fwupgradecfg-gen.sh: Generate sha256sum for uboot verification   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 02/16] ar71xx: add kernel support for the OpenMesh OM5P-AC board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 03/16] ar71xx: add user-space support for the OpenMesh OM5P-AC   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 04/16] scripts/om-fwupgradecfg-gen.sh: add support for the OM5P-AC   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 05/16] ar71xx: enable sysupgrade for the OpenMesh OM5P-AC   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 06/16] package/om-watchdog: add OpenMesh OM5P-AC support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 07/16] package/uboot-envtools: add OpenMesh OM5P-AC support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 08/16] ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-AC board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 09/16] ar71xx: create profile and build image for the OpenMesh OM5P-AC board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 10/16] ar71xx: add kernel support for the OpenMesh OM5P-ACv2 board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 11/16] ar71xx: add user-space support for the OpenMesh OM5P-ACv2   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 12/16] ar71xx: enable sysupgrade for the OpenMesh OM5P-ACv2   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 13/16] package/om-watchdog: add OpenMesh OM5P-ACv2 support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 14/16] package/uboot-envtools: add OpenMesh OM5P-ACv2 support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 15/16] ar71xx: extract ath10k wifi board.bin for the OpenMesh OM5P-ACv2 board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 16/16] ar71xx: add OM5P-ACv2 to the OM5P-AC profile   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] arc770: enable unaligned access handling simulation in software   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] arc770: build kmod-ath9k-htc wpad-mini by default   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] xtables-addons: build: fix configure compatiblity with POSIX shells   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] tools/cmake: update to 3.5.1   Hannu Nyman
• [OpenWrt-Devel] [PATCH] tools/mpfr: update to 3.1.4   Hannu Nyman
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: add WNR2200 16M version   Hartmut Knaack
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Sven Roederer
• [OpenWrt-Devel] [PATCH] ar71xx: add TP-Link TL-WA901ND-v4 support   Tiziano Bacocco
• [OpenWrt-Devel] [PATCH] [ipq806x] enable hard float   Adrian Panella
• [OpenWrt-Devel] [PATCH] [ipq806x] enable hard float   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH libubox] blobmsg_json: simplify add_separator and fix thread-safety   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] package/utils/usbutils: Update USB IDs list and drop gzip compression   Daniel Engberg
• [OpenWrt-Devel] [PATCH v2] package/utils/usbutils: Update USB IDs list and drop gzip compression   Daniel Engberg
• [OpenWrt-Devel] cfg80211 wext-compat layer in OpenWRT   Sergey Naumov
• [OpenWrt-Devel] [PATCH v3] package/utils/usbutils: Update USB IDs list and drop gzip compression   Daniel Engberg
• [OpenWrt-Devel] [PATCH 1/3] curl: upstep to latest version 7.48.0   Dirk Feytons
• [OpenWrt-Devel] [PATCH 2/3] curl: add config option for NTLM support   Dirk Feytons
• [OpenWrt-Devel] [PATCH 3/3] curl: add flags to allow gc-sections to strip out unused code   Dirk Feytons
• [OpenWrt-Devel] [PATCH 1/3] lantiq-dsl: bugfix db negative sign after comma   Florian Eckert
• [OpenWrt-Devel] [PATCH 1/3] lantiq-dsl: bugfix db negative sign after comma   Florian Eckert
• [OpenWrt-Devel] [PATCH 2/3] lantiq-dsl: bugfix latency values swapped for lucistat   Florian Eckert
• [OpenWrt-Devel] [PATCH 3/3] lantiq-dsl: add missing blank in dsl output   Florian Eckert
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Saverio Proto
• [OpenWrt-Devel] [PATCH] brcm2708: Implement sysupgrade image check   Christian Lamparter
• [OpenWrt-Devel] [PATCH] brcm2708: Implement sysupgrade image check   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] hostapd.sh: Add support for "anonymous_identity" config field   Kevin O'Connor
• [OpenWrt-Devel] [luci] [PATCH] luci-mod-admin-full: Add option to set anonymous_identity field   Kevin O'Connor
• [OpenWrt-Devel] [PATCH 3/3] curl: add flags to allow gc-sections to strip out unused code   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2] brcm2708: implement sysupgrade image check   Christian Lamparter
• [OpenWrt-Devel] [PATCH 3/3] curl: add flags to allow gc-sections to strip out unused code   Dirk Feytons
• [OpenWrt-Devel] [PATCH 0/3] add support for Cisco Z1   Christian Lamparter
• [OpenWrt-Devel] [PATCH 1/3] firmware-utils mkmerakifw-old: firmware generator for Z1   Christian Lamparter
• [OpenWrt-Devel] [PATCH 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Christian Lamparter
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway   Christian Lamparter
• [OpenWrt-Devel] [PATCH] [ramips] Add support for Omnima MiniCloudless boards   Ivan
• [OpenWrt-Devel] [PATCH] arc770/axs101: mimic real wireless router   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] ramips: mt7621: add support for disabling flow control   John Crispin
• [OpenWrt-Devel] [PATCH] arc770/axs101: mimic real wireless router   John Crispin
• [OpenWrt-Devel] [PATCH v2] ramips: rt3352 usbphy fix in dts-file   John Crispin
• [OpenWrt-Devel] [PATCH v2] ramips: Add support for ZBT WG3526   John Crispin
• [OpenWrt-Devel] [PATCH] [ramips] Add support for Omnima MiniCloudless boards   John Crispin
• [OpenWrt-Devel] [PATCH v3] ramips: rt3352 usbphy fix in dts-file   Сергей Василюгин
• [OpenWrt-Devel] [PATCH] [ramips] Adjust image size limit for the D-Link DIR-860L B1   Kristian Evensen
• [OpenWrt-Devel] [PATCH v3] ramips: Add support for ZBT WG3526   Kristian Evensen
• [OpenWrt-Devel] [PATCH] ramips: fix support Planex MZK-750DHP.   YuheiOKAWA
• [OpenWrt-Devel] [RFC] ramips: awake rt305x USB controller   Сергей Василюгин
• [OpenWrt-Devel] [PATCH] [ramips] Adjust image size limit for the D-Link DIR-860L B1   郭传鈜
• [OpenWrt-Devel] [PATCH] [ramips] Adjust image size limit for the D-Link DIR-860L B1   John Crispin
• [OpenWrt-Devel] [PATCH] b53: override ports 5 and 7 if using CPU port 8 on BCM5301x switch   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] feeds.conf.default: remove the commented ancient feeds   Hannu Nyman
• [OpenWrt-Devel] [RFC] ar71xx: add TP-Link TL-WR810N support   Jens Steinhauser
• [OpenWrt-Devel] [PATCH CC] ar71xx: fix nondeterministic hangs during bootconsole/console handover   Matthias Schiffer
• [OpenWrt-Devel] ar71xx: Adding TP-Link TL-WR740N v6 support to trunk...   Stijn Segers
• [OpenWrt-Devel] ar71xx: Adding TP-Link TL-WR740N v6 support to trunk...   Matthias Schiffer
• [OpenWrt-Devel] ar71xx: Adding TP-Link TL-WR740N v6 support to trunk...   Stijn Segers
• [OpenWrt-Devel] ar71xx: Adding TP-Link TL-WR740N v6 support to trunk...   Matthias Schiffer
• [OpenWrt-Devel] [RFC] ramips: awake rt305x USB controller   John Crispin
• [OpenWrt-Devel] [PATCH v3] ramips: rt3352 usbphy fix in dts-file   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: mt7621: add support for disabling flow control   Cristian Morales Vega
• [OpenWrt-Devel] [PATCH] ubus: cli.wait_for: add polling for services   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] brcm63xx: fix external IRQs   dani
• [OpenWrt-Devel] [RFC relayd 0/2] relayd: add ipv6 support   Michal Kazior
• [OpenWrt-Devel] [RFC relayd 1/2] relayd: add ipv6 support   Michal Kazior
• [OpenWrt-Devel] [RFC relayd 2/2] relayd: add ipv6 link local support   Michal Kazior
• [OpenWrt-Devel] [PATCH] CC: ramips: backport rt3352 usbphy fix in dts-file   Сергей Василюгин
• [OpenWrt-Devel] [PATCH] ramips: add support for ELECOM WRH-300CR   FUKAUMI Naoki
• [OpenWrt-Devel] [RFC relayd 1/2] relayd: add ipv6 support   Bjørn Mork
• [OpenWrt-Devel] [PATCH] ramips: awake rt305x USB controller   Сергей Василюгин
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: add append write support   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/3] [rpcd] file: handle return output of b64_decode   Luka Perkov
• [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: add myself in Copyright header   Luka Perkov
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Laurent GUERBY
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Daniel Petre
• [OpenWrt-Devel] [PATCH] ipq806x: enable hard float   Adrian Panella
• [OpenWrt-Devel] [PATCH] ipq806x: enable hard float   Adrian Panella
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for the OMYlink OMY-X1   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx: Add TP-Link TL-WR740N v6 support to trunk   Stijn Segers
• [OpenWrt-Devel] [PATCH] ar71xx: Add TP-Link TL-WR740N v6 support to 15.05.1   Stijn Segers
• [OpenWrt-Devel] [PATCH 2/3] [rpcd] file: handle return output of b64_decode   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCHv2] ar71xx: Add support for the OMYlink OMY-G1   L. D. Pinney
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Baptiste Clenet
• [OpenWrt-Devel] [PATCH v2 2/3] [rpcd] file: handle return output of b64_decode   Luka Perkov
• [OpenWrt-Devel] [PATCH v2] ramips: add support for ELECOM WRH-300CR   FUKAUMI Naoki
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Adam Kent
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex CS-QR10   YuheiOKAWA
• [OpenWrt-Devel] [RFC relayd 1/2] relayd: add ipv6 support   Michal Kazior
• [OpenWrt-Devel] [PATCH] remove .git files from images   joerg jungermann
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH v2] brcm63xx: implement gpio to irq   dani
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Daniel Petre
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Jo-Philipp Wich
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Daniel Petre
• [OpenWrt-Devel] [PATCH] lantiq: use new image build process for some images   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2] ramips: add support for ELECOM WRH-300CR   Naoki FUKAUMI
• [OpenWrt-Devel] [UCI] uci import -m duplicates list options   Nemesis
• [OpenWrt-Devel] [UCI] uci import -m duplicates list options   Yousong Zhou
• [OpenWrt-Devel] [PATCH] procd: restrict ujail to supported platforms   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] procd: restrict ujail to supported platforms   Etienne Champetier
• [OpenWrt-Devel] [PATCH] procd: restrict ujail to supported platforms   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] base-files: allow to set arbitrary ip address and netmask   Roman Yeryomin
• [OpenWrt-Devel] OpenVPN server doesnt send AUTH_FAILED   Jakub Jančo
• [OpenWrt-Devel] [PATCH] ar71xx: Add TP-Link TL-WA901ND v4 support to Chaos Calmer 15.05.1   Stijn Segers
• [OpenWrt-Devel] [PATCH] ramips: mt7620: Fix USB frequency scaling   D. Andrei MăceÈ™
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Baptiste Clenet
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX300NP   YuheiOKAWA
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Baptiste Clenet
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: enable UCLIBC_HAS_OBSOLETE_BSD_SIGNAL   Alexey Brodkin
• [OpenWrt-Devel] [PATCH v2] ar71xx: Add TP-Link TL-WA901ND v4 support to Chaos Calmer 15.05.1   Stijn Segers
• [OpenWrt-Devel] [PATCH] ramips: mt7620: Fix USB frequency scaling   Naoki FUKAUMI
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: enable UCLIBC_HAS_OBSOLETE_BSD_SIGNAL   Karl Palsson
• [OpenWrt-Devel] [UCI] uci import -m duplicates list options   Nemesis
• [OpenWrt-Devel] [UCI] uci import -m duplicates list options   Jo-Philipp Wich
• [OpenWrt-Devel] [UCI] uci import -m duplicates list options   Nemesis
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: enable UCLIBC_HAS_OBSOLETE_BSD_SIGNAL   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] projects/uci: lua: use built in pkg-config support for alternatives   Karl Palsson
• [OpenWrt-Devel] [meta-python] python-m2crypto: fix SSLv2 symbol issue   Mats Karrman
• [OpenWrt-Devel] [meta-python] python-m2crypto: fix SSLv2 symbol issue   Mats Karrman
• [OpenWrt-Devel] [meta-python] python-m2crypto: fix SSLv2 symbol issue   Mats Karrman
• [OpenWrt-Devel] [PATCH] hostapd.sh: Add support for "anonymous_identity" config field   Manuel Munz
• [OpenWrt-Devel] [luci] [PATCH] luci-mod-admin-full: Add option to set anonymous_identity field   Manuel Munz
• [OpenWrt-Devel] [PATCH] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   John Marrett
• [OpenWrt-Devel] [PATCH] netifd: Send DHCP release when client exits   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] busybox: update to 1.24.2   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3] package/utils/usbutils: Update USB IDs list and drop gzip compression   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   John Marrett
• [OpenWrt-Devel] [PATCH] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] busybox: update to 1.24.2   Magnus Kroken
• [OpenWrt-Devel] [PATCH] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   Kristian Kielhofner
• [OpenWrt-Devel] [PATCH] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   John Marrett
• [OpenWrt-Devel] [PATCH v3] package/utils/usbutils: Update USB IDs list and drop gzip compression   Daniel Engberg
• [OpenWrt-Devel] [PATCH] netifd: Send DHCP release when client exits   Hans Dedecker
• [OpenWrt-Devel] [PATCH] ar71xx: add tools/kernel2minor package for Mikrotik NOR flash devices.   adron at yapic.net
• [OpenWrt-Devel] [PATCH] netifd: Send DHCP release when client exits   Bjørn Mork
• [OpenWrt-Devel] [PATCH] netifd: Send DHCP release when client exits   Hans Dedecker
• [OpenWrt-Devel] [RFC] ag71xx: Enable flow control for builtin switch port   Sven Eckelmann
• [OpenWrt-Devel] [PATCHv2] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   John Marrett
• [OpenWrt-Devel] [PATCH] imx6: images: add bootfs.tar.gz build artifact   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH 1/2] oxnas: add support for Akitio MyCloud mini   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] oxnas: clean-up and improve profiles   Daniel Golle
• [OpenWrt-Devel] [RFC] ag71xx: Enable flow control for builtin switch port   Conn O'Griofa
• [OpenWrt-Devel] [RFC] ag71xx: Enable flow control for builtin switch port   Sven Eckelmann
• [OpenWrt-Devel] [RFC] ag71xx: Enable flow control for builtin switch port   Conn O'Griofa
• [OpenWrt-Devel] [PATCH v3] package/utils/usbutils: Update USB IDs list and drop gzip compression   Hauke Mehrtens
• [OpenWrt-Devel] [PATCHv2] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   Hauke Mehrtens
• [OpenWrt-Devel] [RFC relayd 0/2] relayd: add ipv6 support   Baptiste Jonglez
• [OpenWrt-Devel] [PATCH] feeds.conf.default: remove the commented ancient feeds   Hannu Nyman
• [OpenWrt-Devel] [PATCHv3] [kernel] Support for new Archer C7 with gd25q128 chip in 15.05.1   John Marrett
• [OpenWrt-Devel] Add support for TP-Link Archer C2600   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 1/9] include/image.mk: Add TP-Link image safe-loader define   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 2/9] tools/tplink-safeloader: Add support for Archer C2600   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 3/9] ipq806x: Add Archer C2600 to image Makefile   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 4/9] ipq806x/base-files: Add Archer C2600 board LEDs/network   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 5/9] ipq806x/base-files: Add support for Archer C2600   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 6/9] ipq806x/base-files: Extract ath10k calibration data   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 7/9] ipq806x/profiles: Add TP-Link profile with C2600 support   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 8/9] ipq806x/dts: Add Archer C2600 DTSI   Darryl Sokoloski
• [OpenWrt-Devel] [PATCH 9/9] kernel/mac80211: Skip ath10k OTP check if caldata found   Darryl Sokoloski
• [OpenWrt-Devel] (no subject)   Ben Barker
• [OpenWrt-Devel] [PATCH] Add support for multiple RADIUS servers   amine.ahd
• [OpenWrt-Devel] [PATCH] ramips: update DTS file for Planex DB-WRT01   YuheiOKAWA
• [OpenWrt-Devel] [PATCH] feeds.conf.default: remove the commented ancient feeds   John Crispin
• [OpenWrt-Devel] [PATCH] Add support for multiple RADIUS servers   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] Add support for multiple RADIUS servers   John Crispin
• [OpenWrt-Devel] [RFC v2] zynq: Re-implement mkits.sh and use it   Jason Wu
• [OpenWrt-Devel] [PATCH] zynq: Remove rdinit patch   Jason Wu
• [OpenWrt-Devel] [PATCH] Zynq: Add Zedboard device support   Jason Wu
• [OpenWrt-Devel] [PATCH] zynq: Add Zybo device support   Jason Wu
• [OpenWrt-Devel] upstream opkg   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] Add support for multiple RADIUS servers   Amine Aouled Hamed
• [OpenWrt-Devel] [PATCH 1/4] tools: firmware-utils: clean up mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/4] tools: firmware-utils: add region code support to mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 3/4] ar71xx: fix giving extra arguments to Build/mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 4/4] ar71xx: build TP-LINK Archer C7 images with US region code   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] Hostapd: Add support for multiple RADIUS servers   amine.ahd
• [OpenWrt-Devel] upstream opkg   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 2/4] tools: firmware-utils: add region code support to mktplinkfw   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 3/4] ar71xx: fix giving extra arguments to Build/mktplinkfw   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 2/4] tools: firmware-utils: add region code support to mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 3/4] ar71xx: fix giving extra arguments to Build/mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Baptiste Clenet
• [OpenWrt-Devel] [PATCH v2 1/4] tools: firmware-utils: clean up mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 2/4] tools: firmware-utils: add region code support to mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 3/4] ar71xx: fix giving extra arguments to Build/mktplinkfw   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v2 4/4] ar71xx: build TP-LINK Archer C7 images with US region code   Matthias Schiffer
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Marc Nicholas
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Marc Nicholas
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Noble Pepper
• [OpenWrt-Devel] mt76 wifi module on mt7688 board, no interface   Marc Nicholas
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX300NP   John Crispin
• [OpenWrt-Devel] IEEE 802.11s   Prabhu Janakaraj
• [OpenWrt-Devel] IEEE 802.11s   Prabhu Janakaraj
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex CS-QR10   John Crispin
• [OpenWrt-Devel] [PATCH] oxnas: add missing semicolon   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] lantiq: Fix typo in LED diag script.   Vittorio Gambaletta (VittGam)
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   Vittorio Gambaletta (VittGam)
• [OpenWrt-Devel] [PATCH] mac80211: ath9k: add GPIO support for AR9280 chip   Michal
• [OpenWrt-Devel] IEEE 802.11s   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH/RFC] dnsmasq: run as dedicated UID/GID   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] lantiq: Fix typo in LED diag script.   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   Mathias Kresin
• [OpenWrt-Devel] [PATCH] lantiq: fix brnImage build   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   Vittorio G (VittGam)
• [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
• [OpenWrt-Devel] [PATCH] [scripts] avoid hard-coded path in sha-bang   Iblis Lin
• [OpenWrt-Devel] [PATCHv2] ramips: add support for Planex CS-QR10   YuheiOKAWA
• [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
• [OpenWrt-Devel] [PATCHv2] ramips: add support for Planex MZK-EX300NP   YuheiOKAWA
• [OpenWrt-Devel] Checksums of all files   Michal Hrusecky
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Laurent GUERBY
• [OpenWrt-Devel] [PATCH] ar71xx: modernize fast SPI flash read   Heiner Kallweit
• [OpenWrt-Devel] [PATCH] ubox: make system log support as a selectable option   Andrej Vlasic
• [OpenWrt-Devel] [RFC] ramips: fix bad patch awake rt305x USB controller   Сергей Василюгин
• [OpenWrt-Devel] MAC swap handling for QCA8337N   Gareth Parker
• [OpenWrt-Devel] [PATCH] lantiq: fix brnImage build   Oswald Buddenhagen
• [OpenWrt-Devel] [PATCH] ar71xx: modernize fast SPI flash read   Heiner Kallweit
• [OpenWrt-Devel] [PATCH v2] ar71xx: modernize fast SPI flash read   Heiner Kallweit
• [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
• [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
• [OpenWrt-Devel] make -j<something> on ar71xx dies.   Weedy
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Weedy
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Tim Niemeyer
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   John Crispin
• [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
• [OpenWrt-Devel] build: conditional dependencies in packages sharing the same source   Eyal Birger
• [OpenWrt-Devel] undefined reference while building   Weedy
• [OpenWrt-Devel] [PATCHv3] ramips: add support for Planex MZK-EX300NP   YuheiOKAWA
• [OpenWrt-Devel] Issue with deferred GPIO probing on ar71xx/TL-WDR3600 under kernel 4.4   Heiner Kallweit
• [OpenWrt-Devel] Issue with deferred GPIO probing on ar71xx/TL-WDR3600 under kernel 4.4   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/5] lantiq: new image build process - fix kernel entry address   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/5] lantiq: build sysupgrade images for lantiqImage   Mathias Kresin
• [OpenWrt-Devel] [PATCH 3/5] lantiq: remove orphaned tp-link image build steps   Mathias Kresin
• [OpenWrt-Devel] [PATCH 4/5] add a no dict version of lzma to new image build code   Mathias Kresin
• [OpenWrt-Devel] [PATCH 5/5] lantiq: use new image build process for brnImages   Mathias Kresin
• [OpenWrt-Devel] [PATCH] ar71xx: simplify patch 613 and add missing error handling   Heiner Kallweit
• [OpenWrt-Devel] [PATCH] lantiq: fix brnImage build   Hauke Mehrtens
• [OpenWrt-Devel] [PATCHv4] ramips: add support for Planex MZK-EX300NP   YuheiOKAWA
• [OpenWrt-Devel] undefined reference while building   Hauke Mehrtens
• [OpenWrt-Devel] undefined reference while building   Weedy
• [OpenWrt-Devel] [PATCH] mtd-utils: fix build with glibc >= 2.23   Hauke Mehrtens
• [OpenWrt-Devel] undefined reference while building   Hauke Mehrtens
• [OpenWrt-Devel] build: conditional dependencies in packages sharing the same source   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] ubox: make system log support as a selectable option   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] lantiq: uboot-envtools on BTHOMEHUBV3A   Ben Mulvihill
• [OpenWrt-Devel] build: conditional dependencies in packages sharing the same source   Eyal Birger
• [OpenWrt-Devel] [PATCH] lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A   Ben Mulvihill
• [OpenWrt-Devel] [PATCHv1] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCHv2] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCHv3] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Bastian Bittorf
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   John Crispin
• [OpenWrt-Devel] [PATCH v4] package/utils/usbutils: Update USB IDs list and drop gzip compression   Daniel Engberg
• [OpenWrt-Devel] [PATCH 01/??] [tools] make-ext4fs glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH] lantiq: use dwc2 by default on BTHOMEHUBV3A and WBMR   Ben Mulvihill
• [OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A   John Crispin
• [OpenWrt-Devel] [PATCH 01/??] [tools] make-ext4fs glibc >= 2.23 compat   John Crispin
• [OpenWrt-Devel] [PATCH 01/??] [tools] make-ext4fs glibc >= 2.23 compat   Jo-Philipp Wich
• [OpenWrt-Devel] [RFC] ramips: fix bad patch awake rt305x USB controller   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   John Crispin
• [OpenWrt-Devel] [PATCH] [scripts] avoid hard-coded path in sha-bang   John Crispin
• [OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: use dwc2 by default on BTHOMEHUBV3A and WBMR   John Crispin
• [OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCH] Hostapd: Add support for multiple RADIUS servers   John Crispin
• [OpenWrt-Devel] [PATCHv4] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A   Martin Blumenstingl
• [OpenWrt-Devel] [RFC] ramips: fix bad patch awake rt305x USB controller   Martin Blumenstingl
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCH] ar71xx: add tools/kernel2minor package for Mikrotik NOR flash devices.   John Crispin
• [OpenWrt-Devel] How to initialize multiple phy radios   Valo, Kalle
• [OpenWrt-Devel] [luci] [PATCH] luci-mod-admin-full: Add option to set anonymous_identity field   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A   Ben Mulvihill
• [OpenWrt-Devel] [PATCH] lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A   John Crispin
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCH v2] lantiq: use dwc2 by default on all ar9 boards   Ben Mulvihill
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCH] lantiq: install uboot-envtools by default on BTHOMEHUBV3A   Ben Mulvihill
• [OpenWrt-Devel] [PATCH/RFC] dnsmasq: run as dedicated UID/GID   John Crispin
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCH/RFC] dnsmasq: run as dedicated UID/GID   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 01/??] [tools] make-ext4fs glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH 01/??] [tools] make-ext4fs glibc >= 2.23 compat   Jo-Philipp Wich
• [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
• [OpenWrt-Devel] [PATCH 01/05] [tools] e2fsprogs glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH 02/05] [tools] findutils glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH 03/05] [tools] mtd-utils glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH 04/05] [tools] squashfs glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH 05/05] [tools] squashfs4 glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] [PATCH 02/05] [tools] findutils glibc >= 2.23 compat   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH/RFC] dnsmasq: run as dedicated UID/GID   Daniel Golle
• [OpenWrt-Devel] [PATCH v2] dnsmasq: run as dedicated UID/GID   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   Vittorio G (VittGam)
• [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
• [OpenWrt-Devel] [RFC] ar71xx: add TP-Link TL-WR810N support   John Crispin
• [OpenWrt-Devel] [PATCH v2] dnsmasq: run as dedicated UID/GID   Karl Palsson
• [OpenWrt-Devel] Buildbot not building all images for Lantiq XRX200   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] lantiq: remove read-only flag on two partitions on BTHOMEHUBV3A   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 5/5] lantiq: use new image build process for brnImages   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 2/2] lantiq: Fix status LED on TDW89X0 after boot is completed.   Vittorio G (VittGam)
• [OpenWrt-Devel] How to initialize multiple phy radios   David Hutchison
• [OpenWrt-Devel] [PATCH v3] ar71xx: Add support for the OMYlink OMY-G1   L. D. Pinney
• [OpenWrt-Devel] [PATCH] [CC] lantiq: Fix ath9k LED for TDW8970.   Vittorio Gambaletta (VittGam)
• [OpenWrt-Devel] [PATCH] [CC] lantiq: Fix LED handling.   Vittorio Gambaletta (VittGam)
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/4] omap: add sdcard creation script   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/4] [RFC] omap: switch to 4.4   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/4] kernel/spi: add kernel package for spi-omap-24xx   Alexander Couzens
• [OpenWrt-Devel] [PATCH 4/4] add usb gadget ehci debug driver   Alexander Couzens
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [RFC] ramips: fix bad patch awake rt305x USB controller   Сергей Василюгин
• [OpenWrt-Devel] [PATCH 02/05] [tools] findutils glibc >= 2.23 compat   Weedy
• [OpenWrt-Devel] upstream opkg   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] Flashing Openwrt to Mikrotik Board RB433AH   Matogoro Jabera
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCH v2][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Tim Niemeyer
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   John Crispin
• [OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] How to initialize multiple phy radios   Valo, Kalle
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   kwadronaut
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   John Crispin
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   kwadronaut
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Daniel Petre
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   John Crispin
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] target/linux/mpc85xx: fix EDEADLOCK define collisions with musl   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] mpc85xx: Add T4240 sub-target   Helmut Schaa
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   Alexander Couzens
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   John Crispin
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   Imre Kaloz
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   John Crispin
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   John Crispin
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   Imre Kaloz
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   John Crispin
• [OpenWrt-Devel] [PATCH 0/4] omap 4.4, ehci, sdcard   Imre Kaloz
• [OpenWrt-Devel] [PATCHv6] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] How to initialize multiple phy radios   Christian Lamparter
• [OpenWrt-Devel] [PATCHv7] ramips: add support for SamKnows SK-WB8   Andrew Yong
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Sven Roederer
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   John Crispin
• [OpenWrt-Devel] [PATCH] Hostapd: Add support for multiple RADIUS servers   amine.ahd
• [OpenWrt-Devel] [PATCH] mpc85xx: Add T4240 sub-target   John Crispin
• [OpenWrt-Devel] [PATCH] mpc85xx: Add T4240 sub-target   Helmut Schaa
• [OpenWrt-Devel] [PATCH v2] ar71xx: modernize fast SPI flash read   Heiner Kallweit
• [OpenWrt-Devel] [PATCHv8] ramips: Add support for SamKnows Whitebox 8   Andrew Yong
• [OpenWrt-Devel] Which image for the Nanostation Loco M2, WAS:Cannot flash UBNT Loco M2   Aaron Z
• [OpenWrt-Devel] [PATCHv8] ramips: Add support for SamKnows Whitebox 8   Andrew Yong
• [OpenWrt-Devel] [PATCHv9] ramips: Add support for SamKnows Whitebox 8   Andrew Yong
• [OpenWrt-Devel] [PATCH] defaults.c: remove toplevel_rule struct   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] [firewall3] defaults.c: remove toplevel_rule struct   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] [firewall3] defaults.c: remove toplevel_rule struct   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH][CC] Revert "ar71xx: change some TP-link modelnames (WR841, WA701, WA730)"   Bastian Bittorf
• [OpenWrt-Devel] UART1 mt7688   Baptiste Clenet
• [OpenWrt-Devel] [PATCH v2 1/6] netifd: Make sending DHCP release configurable via uci when client exits   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/6] dropbear: Make utmp and putuline support configurable via seperate config options   Hans Dedecker
• [OpenWrt-Devel] [PATCH 3/6] iproute2: Add package for nstat utility   Hans Dedecker
• [OpenWrt-Devel] [PATCH 4/6] dropbear: Add procd interface triggers when interface config is specified   Hans Dedecker
• [OpenWrt-Devel] [PATCH 5/6] dnsmasq: Add conntrack support in the full variant   Hans Dedecker
• [OpenWrt-Devel] [PATCH 6/6] ppp: Add ppp-mod-passwordfd subpackage to ppp   Hans Dedecker
• [OpenWrt-Devel] UART1 mt7688   Baptiste Clenet
• [OpenWrt-Devel] [PATCH 1/2] [ubox] syslog: use realloc to change log buffer size   Dan Bugnar
• [OpenWrt-Devel] [PATCH 2/2] [ubox] logd: add ubus reload method   Dan Bugnar
• [OpenWrt-Devel] [PATCH] [RFC] toolchain/musl/ppc: add header guards for EDEADLOCK define   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] strace: fix build on mpc85xx target   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH v3] ar71xx: modernize fast SPI flash read   Heiner Kallweit
• [OpenWrt-Devel] [PATCH 1/2] lantiq: fix minor typos in 11G/22F phy driver   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: use the same functionality for all ethernet phys led   Mathias Kresin
• [OpenWrt-Devel] [PATCH v2 1/2] lantiq: fix minor typos in 11G/22F phy driver   Mathias Kresin
• [OpenWrt-Devel] [PATCH v2 2/2] lantiq: use the same functionality for all ethernet phys led   Mathias Kresin
• [OpenWrt-Devel] [PATCH v2 2/2] lantiq: use the same functionality for all ethernet phys led   John Crispin
• [OpenWrt-Devel] [PATCH] base-files: evalute uci-defaults on run-time installations   Daniel Golle
• [OpenWrt-Devel] [PATCH v2] base-files: evalute uci-defaults on run-time installations   Daniel Golle
• [OpenWrt-Devel] [PATCH v3] base-files: evaluate uci-defaults on run-time installations   Daniel Golle
• [OpenWrt-Devel] [PATCH v3] base-files: evaluate uci-defaults on run-time installations   Hannu Nyman
• [OpenWrt-Devel] [PATCH] xtables-addons: Fix Lua packet script implementation   Hans Dedecker
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.   YuheiOKAWA
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2 1/6] netifd: Make sending DHCP release configurable via uci when client exits   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH v2 1/6] netifd: Make sending DHCP release configurable via uci when client exits   Hans Dedecker
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.   ＠SRCHACK.ORG
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.   Andrew Yong
• [OpenWrt-Devel] [PATCH] netifd: Add configurable DHCP release behavior   Hans Dedecker
• [OpenWrt-Devel] [PATCH] [scripts] avoid hard-coded path in sha-bang   e196819 at hotmail.com
• [OpenWrt-Devel] [PATCH] [scripts] avoid hard-coded path in sha-bang   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.   Piotr Dymacz
• [OpenWrt-Devel] [PATCH] set mark for locally generated traffic in OUTPUT chain   Daniel Golle
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.   Andrew Yong
• [OpenWrt-Devel] [PATCH v2] scripts: avoid hard-coded paths in scripts   Iblis Lin
• [OpenWrt-Devel] [PATCH v4] base-files: evaluate uci-defaults on run-time installations   Daniel Golle
• [OpenWrt-Devel] [PATCH] set mark for locally generated traffic in OUTPUT chain   John Crispin
• [OpenWrt-Devel] [PATCH] set mark for locally generated traffic in OUTPUT chain   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] set mark for locally generated traffic in OUTPUT chain   Daniel Golle
• [OpenWrt-Devel] [PATCH] ubi-utils: package mkfs.ubifs and mtdinfo into ubi-utils   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] set mark for locally generated traffic in OUTPUT chain   Hans Dedecker
• [OpenWrt-Devel] [PATCH 1/2] mvebu: config-4.1: make mmc drivers builtin   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH 2/2] mvebu: add squashfs image type to MMCProfile   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH] set mark for locally generated traffic in OUTPUT chain   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH v2 1/2] mvebu: config-4.1: make mmc drivers builtin   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH v2 2/2] mvebu: add squashfs image type to MMCProfile   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH] target/linux/mpc85xx: fix talitos crypto driver init   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH v3 1/2] mvebu: config-4.1: make mmc drivers builtin   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH v3 2/2] mvebu: add squashfs image type to MMCProfile   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH] target/linux/mpc85xx: fix talitos crypto driver init   Jonas Eymann
• [OpenWrt-Devel] [PATCH] target/linux/mpc85xx: fix talitos crypto driver init   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 1/2] mount_root: implement overlay= boot option   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH 2/2] ext4_part_match: fix bug that prevented matching names   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH v2 1/3] mount_root: implement overlay= boot option   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH v2 2/3] ext4_part_match: fix bug that prevented matching names   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH v2 3/3] mount_root: Also handle new overlay= option in done()   josua.mayer97 at gmail.com
• [OpenWrt-Devel] [PATCH v3 1/2] mvebu: config-4.1: make mmc drivers builtin   Andrej Vlasic
• [OpenWrt-Devel] [PATCH] libffi: bump to version 3.2.1   Alexey Brodkin
• [OpenWrt-Devel] [PATCH v2 1/3] mount_root: implement overlay= boot option   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2 1/3] mount_root: implement overlay= boot option   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 2/6] dropbear: Make utmp and putuline support configurable via seperate config options   John Crispin
• [OpenWrt-Devel] [PATCHv9] ramips: Add support for SamKnows Whitebox 8   John Crispin
• [OpenWrt-Devel] [PATCHv9] ramips: Add support for SamKnows Whitebox 8   Andrew Yong
• [OpenWrt-Devel] [PATCH 2/6] dropbear: Make utmp and putuline support configurable via seperate config options   Hans Dedecker
• [OpenWrt-Devel] [PATCHv10] ramips: Add support for SamKnows Whitebox 8   Andrew Yong
• [OpenWrt-Devel] netifd hotplug event race condition for monitor interfaces   Bruno Randolf
• [OpenWrt-Devel] [PATCHv10] ramips: Add support for SamKnows Whitebox 8   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v2] dropbear: Make utmp and putuline support configurable via a seperate config option   Hans Dedecker
• [OpenWrt-Devel] [PATCH v2 2/3] ext4_part_match: fix bug that prevented matching names   Ram Chandra Jangir
• [OpenWrt-Devel] [PATCHv10] ramips: Add support for SamKnows Whitebox 8   Andrew Yong
• [OpenWrt-Devel] [PATCH] load running state after lock is acquired   Alin Nastac
• [OpenWrt-Devel] [PATCH v2 1/3] mount_root: implement overlay= boot option   Josua Mayer
• [OpenWrt-Devel] [PATCH 1/2] ubus: lua: return string errors, not just codes   Karl Palsson
• [OpenWrt-Devel] [PATCH 2/2] ubus: lua: use built in pkg-config support for alternatives   Karl Palsson
• [OpenWrt-Devel] [PATCH v2] ubox: make system log support as a separate package   Andrej Vlasic
• [OpenWrt-Devel] Linksys WRT1900ACS router is not booting after flashing custom build   Avijit Das
• [OpenWrt-Devel] Linksys WRT1900ACS router is not booting after flashing custom build   Vincent Wiemann
• [OpenWrt-Devel] r49252 (dnsmasq: run as dedicated UID/GID) causing major havoc   Hannu Nyman
• [OpenWrt-Devel] r49252 (dnsmasq: run as dedicated UID/GID) causing major havoc   Daniel Golle
• [OpenWrt-Devel] [PATCH] ar71xx: Fix eth0 support for Ubiquiti UniFi AP AC   p.wassi at gmx.at
• [OpenWrt-Devel] r49252 (dnsmasq: run as dedicated UID/GID) causing major havoc   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] lantiq: add device tree binding for the phy clock source   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: VGV7510KW22BRN - set the phy clock source   Mathias Kresin
• [OpenWrt-Devel] [PATCH] lantiq: VG3503J - use the same PHY led functionality as the OEM firmware   Mathias Kresin
• [OpenWrt-Devel] [PATCH] lantiq: use sysupgrade.bin postfix for tplink images   Mathias Kresin
• [OpenWrt-Devel] [PATCH 1/3] lantiq: move partitions into partion table node   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/3] lantiq: handle the dual-firmware layout of brnboot   Mathias Kresin
• [OpenWrt-Devel] [PATCH 3/3] lantiq: VGV7510KW22BRN - support dual-image   Mathias Kresin
• [OpenWrt-Devel] [PATCH 1/2] lantiq: add device tree binding for the phy clock source   John Crispin
• [OpenWrt-Devel] r49252 (dnsmasq: run as dedicated UID/GID) causing major havoc   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] lantiq: add device tree binding for the phy clock source   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] lantiq: VGV7510KW22BRN - set the phy clock source   Mathias Kresin

Last message date: Sat Apr 30 13:48:23 EDT 2016
Archived on: Thu Jun 25 05:56:24 EDT 2020

• Messages sorted by: [ thread ] [ subject ] [ author ]
• More info on this list...