[OpenWrt-Devel] [PATCH] [ramips] Add support for Omnima MiniCloudless boards
Ivan
ivan at omnima.co.uk
Fri Apr 8 06:25:07 EDT 2016
This patch adds support for Omnima MiniCloudless MT7620 + MT76x12
Concurrent Dual Band platform.
Tested on the board and patch applies to OpenWrt r49119 checked out on
7th April 2016.
Signed-off-by: Ivan Ignjatic <ivan at omnima.co.uk>
---
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5816e60..2b11a9f 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -182,6 +182,10 @@ miniembplug)
set_wifi_led "$board:red:wlan"
set_usb_led "$board:green:mobile"
;;
+minicloudless)
+ set_wifi_led "$board:red:wifi"
+ ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0"
+ ;;
miwifi-mini)
ucidef_set_led_default "power" "power" "$board:red:status" "1"
;;
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
b/target/linux/ramips/base-files/etc/board.d/02_network
index 4b65d36..488ab50 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -129,7 +129,8 @@ ramips_setup_interfaces()
wrtnode2p | \
wrtnode2r | \
wt3020|\
- zbt-wa05)
+ zbt-wa05|\
+ minicloudless)
ucidef_add_switch "switch0" \
"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "6 at eth0"
;;
diff --git a/target/linux/ramips/base-files/etc/diag.sh
b/target/linux/ramips/base-files/etc/diag.sh
index daa7fb1..809d780 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -131,6 +131,9 @@ get_status_led() {
zte-q7)
status_led="$board:red:status"
;;
+ minicloudless)
+ status_led="$board:red:wifi"
+ ;;
mr-102n)
status_led="$board:amber:status"
;;
diff --git a/target/linux/ramips/base-files/lib/ramips.sh
b/target/linux/ramips/base-files/lib/ramips.sh
index 5f1df7b..58d367e 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -247,6 +247,9 @@ ramips_board_detect() {
*"MiniEMBWiFi")
name="miniembwifi"
;;
+ *"MiniCloudless")
+ name="minicloudless"
+ ;;
*"MiWiFi Mini")
name="miwifi-mini"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c329dce..5014316 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -77,6 +77,7 @@ platform_check_image() {
microwrt|\
miniembplug|\
miniembwifi|\
+ minicloudless|\
miwifi-mini|\
miwifi-nano|\
mlw221|\
diff --git a/target/linux/ramips/dts/MINICLOUDLESS.dts
b/target/linux/ramips/dts/MINICLOUDLESS.dts
new file mode 100644
index 0000000..e49977e
--- /dev/null
+++ b/target/linux/ramips/dts/MINICLOUDLESS.dts
@@ -0,0 +1,145 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "minicloudless", "ralink,mt7620a-soc";
+ model = "Omnima MiniCloudless";
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ palmbus at 10000000 {
+ gpio0: gpio at 600 {
+ status = "okay";
+ };
+
+ gpio1: gpio at 638 {
+ status = "okay";
+ };
+
+ gpio2: gpio at 660 {
+ status = "okay";
+ };
+
+ gpio3: gpio at 688 {
+ status = "okay";
+ };
+
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mx25l12805d";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "m25p128";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x20000>;
+ read-only;
+ };
+
+ partition at 20000 {
+ label = "u-boot-env-ext";
+ reg = <0x20000 0x10000>;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x2000>;
+ read-only;
+ };
+
+ partition at 32000 {
+ label = "u-boot-env+ext";
+ reg = <0x32000 0xE000>;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+ };
+ };
+ };
+
+ ehci at 101c0000 {
+ status = "okay";
+ };
+
+ ohci at 101c1000 {
+ status = "okay";
+ };
+
+ pcie at 10140000 {
+ status = "okay";
+
+ pcie-bridge {
+ mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+ };
+
+ ethernet at 10100000 {
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "wllll";
+ };
+
+ wmac at 10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ otg at 101c0000 {
+ status = "okay";
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "wled", "i2c", "wdt", "ephy", "uartf";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio2 3 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wifi {
+ label = "minicloudless:red:wifi";
+ gpios = <&gpio3 0 1>;
+ };
+
+ lan {
+ label = "minicloudless:green:lan";
+ gpios = <&gpio2 4 1>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7620.mk
b/target/linux/ramips/image/mt7620.mk
index 18cd20a..0af9791 100644
--- a/target/linux/ramips/image/mt7620.mk
+++ b/target/linux/ramips/image/mt7620.mk
@@ -113,7 +113,7 @@ Image/Build/Profile/ArcherC20i=$(call
BuildFirmware/Tplink/$(1),$(1),ArcherC20i,
microwrt_mtd_size=16515072
Image/Build/Profile/MicroWRT=$(call
BuildFirmware/CustomFlash/$(1),$(1),microwrt,MicroWRT,$(microwrt_mtd_size))
Image/Build/Profile/TINY-AC=$(call
BuildFirmware/Default8M/$(1),$(1),tiny-ac,TINY-AC)
-
+Image/Build/Profile/MINICLOUDLESS=$(call
BuildFirmware/Default16M/$(1),$(1),minicloudless,MINICLOUDLESS)
define Image/Build/Profile/Default
$(call Image/Build/Profile/E1700,$(1))
@@ -157,4 +157,5 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/ArcherC20i,$(1))
$(call Image/Build/Profile/MicroWRT,$(1))
$(call Image/Build/Profile/TINY-AC,$(1))
+ $(call Image/Build/Profile/MINICLOUDLESS,$(1))
endef
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list