[OpenWrt-Devel] [PATCH v2] ramips: Add support for ZBT WG3526
John Crispin
john at phrozen.org
Sat Apr 9 05:24:59 EDT 2016
Hi
On 23/03/2016 15:40, Kristian Evensen wrote:
> From: Kristian Evensen <kristian.evensen at gmail.com>
>
> The WG3526 is the follow-up to the 2626 and is mostly the same, with the
> excaption that the mt7602 has been replaced with the mt7603. The internal wifi
> setup has also changed slightly. Based on my tests, everything that worked on
> the 2626 works on the 3526 and with roughly the same performance.
>
> Change v1->v2:
> * Remove some references to 2626 that I had missed in the dts.
>
> Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
> ---
> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> target/linux/ramips/base-files/etc/diag.sh | 3 +-
> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> target/linux/ramips/dts/ZBT-WG3526.dts | 127 +++++++++++++++++++++
> target/linux/ramips/image/Makefile | 7 +-
the layout of this file has changed recently so the patch does not apply
anymore. please rebase/resend it.
John
> target/linux/ramips/mt7621/profiles/zbt.mk | 13 +++
> 7 files changed, 153 insertions(+), 2 deletions(-)
> create mode 100644 target/linux/ramips/dts/ZBT-WG3526.dts
>
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
> index 4b65d36..36e9d3c 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -86,6 +86,7 @@ ramips_setup_interfaces()
> wt1520|\
> y1|\
> zbt-wg2626|\
> + zbt-wg3526|\
> youku-yk1)
> ucidef_add_switch "switch0" \
> "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
> diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
> index daa7fb1..9312a27 100644
> --- a/target/linux/ramips/base-files/etc/diag.sh
> +++ b/target/linux/ramips/base-files/etc/diag.sh
> @@ -65,7 +65,8 @@ get_status_led() {
> v11st-fe|\
> vocore|\
> wmr-300|\
> - zbt-wg2626)
> + zbt-wg2626|\
> + zbt-wg3526)
> status_led="$board:green:status"
> ;;
> atp-52b|\
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
> index 5f1df7b..9a54361 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -505,6 +505,9 @@ ramips_board_detect() {
> *"ZBT-WG2626")
> name="zbt-wg2626"
> ;;
> + *"ZBT-WG3526")
> + name="zbt-wg3526"
> + ;;
> *"ZBT-WR8305RT")
> name="zbt-wr8305rt"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index c329dce..e9b8b8d 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -149,6 +149,7 @@ platform_check_image() {
> zbt-wa05|\
> zbt-we826|\
> zbt-wg2626|\
> + zbt-wg3526|\
> zbt-wr8305rt|\
> zte-q7|\
> youku-yk1)
> diff --git a/target/linux/ramips/dts/ZBT-WG3526.dts b/target/linux/ramips/dts/ZBT-WG3526.dts
> new file mode 100644
> index 0000000..30b508c
> --- /dev/null
> +++ b/target/linux/ramips/dts/ZBT-WG3526.dts
> @@ -0,0 +1,127 @@
> +/dts-v1/;
> +
> +#include "mt7621.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
> + model = "ZBT-WG3526";
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,115200";
> + };
> +
> + sdhci at 10130000 {
> + status = "okay";
> + };
> +
> + palmbus at 1E000000 {
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "jedec,spi-nor";
> + reg = <0 0>;
> + linux,modalias = "m25p80";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + read-only;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0xfb0000>;
> + };
> +
> + };
> + };
> +
> + i2c at 900 {
> + compatible = "ralink,i2c-mt7621";
> + reg = <0x900 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c_pins>;
> + status = "okay";
> + };
> + };
> +
> + pcie at 1e140000 {
> + status = "okay";
> +
> + pcie0 {
> + mt76 at 0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x0000>;
> + mediatek,5ghz = <0>;
> + };
> + };
> +
> + pcie1 {
> + mt76 at 1,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x8000>;
> + mediatek,2ghz = <0>;
> + };
> + };
> + };
> +
> + ethernet at 1e100000 {
> + mtd-mac-address = <&factory 0xe000>;
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> +
> + reset {
> + label = "reset";
> + gpios = <&gpio0 18 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + status {
> + label = "zbt-wg3526:green:status";
> + gpios = <&gpio0 24 1>;
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +};
> diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
> index 0cfb8fb..0612d17 100644
> --- a/target/linux/ramips/image/Makefile
> +++ b/target/linux/ramips/image/Makefile
> @@ -1058,7 +1058,7 @@ endif
> #
>
> ifeq ($(SUBTARGET),mt7621)
> - TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626
> + TARGET_DEVICES += mt7621 wsr-600 wsr-1166 dir-860l-b1 firewrt pbr-m1 re6500 sap-g3200u3 ubnt-erx witi wf-2881 zbt-wg2626 zbt-wg3526
> endif
>
> define Device/mt7621
> @@ -1120,6 +1120,11 @@ define Device/zbt-wg2626
> IMAGE_SIZE := $(ralink_default_fw_size_16M)
> endef
>
> +define Device/zbt-wg3526
> + DTS := ZBT-WG3526
> + IMAGE_SIZE := $(ralink_default_fw_size_16M)
> +endef
> +
> define Device/wf-2881
> DTS := WF-2881
> BLOCKSIZE := 128KiB
> diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk
> index 07131d1..890cc14 100644
> --- a/target/linux/ramips/mt7621/profiles/zbt.mk
> +++ b/target/linux/ramips/mt7621/profiles/zbt.mk
> @@ -16,3 +16,16 @@ define Profile/ZBT-WG2626/Description
> Package set for ZBT-WG2626 device
> endef
> $(eval $(call Profile,ZBT-WG2626))
> +
> +
> +define Profile/ZBT-WG3526
> + NAME:=ZBT-WG3526 Device
> + PACKAGES:=\
> + kmod-usb-core kmod-usb3 kmod-sdhci-mt7620 \
> + kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
> +endef
> +
> +define Profile/ZBT-WG3526/Description
> + Package set for ZBT-WG3526 device
> +endef
> +$(eval $(call Profile,ZBT-WG3526))
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list