[OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-EX750NP.
Andrew Yong
me at ndoo.sg
Thu Apr 28 08:25:11 EDT 2016
I'll take a look at what can be done with the `wifi` script. I think it's
pretty long overdue with IoT modules being huge now.
On 28 Apr 2016 20:23, "Piotr Dymacz" <pepe2k at gmail.com> wrote:
> Hello,
>
> 2016-04-28 13:12 GMT+02:00 Andrew Yong <me at ndoo.sg>:
> [...]
>
> > Many SOM modules and mini routers (and the Zsun card reader
> > https://wiki.hackerspace.pl/projects:zsun-wifi-card-reader) don't have
> > Ethernet ports and manufacturers ship custom OpenWrt with preconfigured
> WiFi
> > for this, and probably will never be supported by OpenWrt releases
> because
> > of how wifi-detect disables WiFi by default.
>
> Fully agree.
> There are other interesting devices, like D-Link DCH-M225 (MT7620A +
> audio) [1].
>
> I know only one way how to use such devices with OpenWrt: define
> hardware button as rfkill and use it after flash.
>
> Cheers,
> Piotr
>
> [1] https://wikidevi.com/wiki/D-Link_DCH-M225_rev_A1
>
> >
> > On 28 Apr 2016 18:48, "＠SRCHACK.ORG" <tochiro.srchack at gmail.com> wrote:
> >>
> >> Hi, Dear Piotr.
> >>
> >> Status quo, is the only way there is access in the UART.
> >> Looking for a good way. I'm thinking.
> >>
> >>
> >> On 2016/04/28 19:24, Piotr Dymacz wrote:
> >>>
> >>> Hello YuheiOKAWA,
> >>>
> >>> Just small question.
> >>> How the user can access the device if it doesn't have Ethernet and the
> >>> WiFi is disabled by default in OpenWrt?
> >>>
> >>> Cheers,
> >>> Piotr
> >>>
> >>>
> >>> 2016-04-28 11:49 GMT+02:00 YuheiOKAWA <tochiro.srchack at gmail.com>:
> >>>>
> >>>> add support for Planex MZK-EX750NP.
> >>>> MZK-EX750NP is MT7620A and MT7610E based 11ac wifi repeater.
> >>>> Built-in power supply.
> >>>> 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet.
> >>>>
> >>>> Signed-off-by: YuheiOKAWA <tochiro.srchack at gmail.com>
> >>>> ---
> >>>> target/linux/ramips/base-files/etc/board.d/01_leds | 4 +
> >>>> .../linux/ramips/base-files/etc/board.d/02_network | 1 +
> >>>> target/linux/ramips/base-files/etc/diag.sh | 3 +-
> >>>> target/linux/ramips/base-files/lib/ramips.sh | 3 +
> >>>> .../ramips/base-files/lib/upgrade/platform.sh | 1 +
> >>>> target/linux/ramips/dts/MZK-EX750NP.dts | 150
> >>>> +++++++++++++++++++++
> >>>> target/linux/ramips/image/mt7620.mk | 2 +
> >>>> target/linux/ramips/mt7620/profiles/planex.mk | 11 ++
> >>>> 8 files changed, 174 insertions(+), 1 deletion(-)
> >>>> create mode 100644 target/linux/ramips/dts/MZK-EX750NP.dts
> >>>>
> >>>> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> >>>> b/target/linux/ramips/base-files/etc/board.d/01_leds
> >>>> index aeaab33..47e1e6a 100755
> >>>> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> >>>> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> >>>> @@ -206,6 +206,10 @@ mr-102n)
> >>>> set_wifi_led "$board:green:wlan"
> >>>> set_usb_led "$board:green:usb"
> >>>> ;;
> >>>> +mzk-ex750np)
> >>>> + ucidef_set_led_default "power" "power" "$board:red:power" "1"
> >>>> + set_wifi_led "$board:red:wifi"
> >>>> + ;;
> >>>> na930)
> >>>> set_usb_led "$board:blue:status"
> >>>> ;;
> >>>> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> >>>> b/target/linux/ramips/base-files/etc/board.d/02_network
> >>>> index c6c740f..ee690f6 100755
> >>>> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> >>>> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> >>>> @@ -165,6 +165,7 @@ ramips_setup_interfaces()
> >>>> d105|\
> >>>> hpm|\
> >>>> mzk-ex300np|\
> >>>> + mzk-ex750np|\
> >>>> na930|\
> >>>> wli-tx4-ag300n|\
> >>>> wrh-300cr)
> >>>> diff --git a/target/linux/ramips/base-files/etc/diag.sh
> >>>> b/target/linux/ramips/base-files/etc/diag.sh
> >>>> index 20ff8ff..c638d16 100644
> >>>> --- a/target/linux/ramips/base-files/etc/diag.sh
> >>>> +++ b/target/linux/ramips/base-files/etc/diag.sh
> >>>> @@ -41,7 +41,8 @@ get_status_led() {
> >>>> hlk-rm04|\
> >>>> jhr-n825r|\
> >>>> mpr-a1|\
> >>>> - mpr-a2)
> >>>> + mpr-a2|\
> >>>> + mzk-ex750np)
> >>>> status_led="$board:red:power"
> >>>> ;;
> >>>> ai-br100|\
> >>>> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> >>>> b/target/linux/ramips/base-files/lib/ramips.sh
> >>>> index 2c669c5..0ac0f68 100755
> >>>> --- a/target/linux/ramips/base-files/lib/ramips.sh
> >>>> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> >>>> @@ -298,6 +298,9 @@ ramips_board_detect() {
> >>>> *"MZK-EX300NP")
> >>>> name="mzk-ex300np"
> >>>> ;;
> >>>> + *"MZK-EX750NP")
> >>>> + name="mzk-ex750np"
> >>>> + ;;
> >>>> *"MZK-W300NH2"*)
> >>>> name="mzk-w300nh2"
> >>>> ;;
> >>>> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> >>>> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> >>>> index 2b24030..86ea4a3 100755
> >>>> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> >>>> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> >>>> @@ -90,6 +90,7 @@ platform_check_image() {
> >>>> mzk-750dhp|\
> >>>> mzk-dp150n|\
> >>>> mzk-ex300np|\
> >>>> + mzk-ex750np|\
> >>>> mzk-w300nh2|\
> >>>> mzk-wdpr|\
> >>>> nbg-419n|\
> >>>> diff --git a/target/linux/ramips/dts/MZK-EX750NP.dts
> >>>> b/target/linux/ramips/dts/MZK-EX750NP.dts
> >>>> new file mode 100644
> >>>> index 0000000..9b5b418
> >>>> --- /dev/null
> >>>> +++ b/target/linux/ramips/dts/MZK-EX750NP.dts
> >>>> @@ -0,0 +1,150 @@
> >>>> +/dts-v1/;
> >>>> +
> >>>> +/include/ "mt7620a.dtsi"
> >>>> +
> >>>> +/ {
> >>>> + compatible = "ralink,mt7620a-soc";
> >>>> + model = "Planex MZK-EX750NP";
> >>>> +
> >>>> + palmbus at 10000000 {
> >>>> + gpio2: gpio at 660 {
> >>>> + status = "okay";
> >>>> + };
> >>>> +
> >>>> + gpio3: gpio at 688 {
> >>>> + status = "okay";
> >>>> + };
> >>>> +
> >>>> + spi at b00 {
> >>>> + status = "okay";
> >>>> +
> >>>> + m25p80 at 0 {
> >>>> + #address-cells = <1>;
> >>>> + #size-cells = <1>;
> >>>> + compatible = "jedec,spi-nor";
> >>>> + reg = <0 0>;
> >>>> + linux,modalias = "m25p80", "w25q64";
> >>>> + spi-max-frequency = <10000000>;
> >>>> +
> >>>> + partition at 0 {
> >>>> + label = "u-boot";
> >>>> + reg = <0x0 0x30000>;
> >>>> + read-only;
> >>>> + };
> >>>> +
> >>>> + partition at 30000 {
> >>>> + label = "u-boot-env";
> >>>> + reg = <0x30000 0x10000>;
> >>>> + read-only;
> >>>> + };
> >>>> +
> >>>> + factory: partition at 40000 {
> >>>> + label = "factory";
> >>>> + reg = <0x40000 0x10000>;
> >>>> + read-only;
> >>>> + };
> >>>> +
> >>>> + partition at 50000 {
> >>>> + label = "firmware";
> >>>> + reg = <0x50000 0x730000>;
> >>>> + };
> >>>> +
> >>>> + partition at 780000 {
> >>>> + label = "Udata";
> >>>> + reg = <0x780000 0x80000>;
> >>>> + };
> >>>> + };
> >>>> + };
> >>>> + };
> >>>> +
> >>>> + pinctrl {
> >>>> + state_default: pinctrl0 {
> >>>> + gpio {
> >>>> + ralink,group = "uartf", "nd_sd",
> >>>> "rgmii2", "wled";
> >>>> + ralink,function = "gpio";
> >>>> + };
> >>>> + };
> >>>> + };
> >>>> +
> >>>> + ethernet at 10100000 {
> >>>> + pinctrl-names = "default";
> >>>> + pinctrl-0 = <&ephy_pins>;
> >>>> + mtd-mac-address = <&factory 0x4>;
> >>>> + mediatek,portmap = "llllw";
> >>>> + };
> >>>> +
> >>>> + wmac at 10180000 {
> >>>> + ralink,mtd-eeprom = <&factory 0>;
> >>>> + };
> >>>> +
> >>>> + pcie at 10140000 {
> >>>> + status = "okay";
> >>>> +
> >>>> + pcie-bridge {
> >>>> + mt76 at 0,0 {
> >>>> + reg = <0x0000 0 0 0 0>;
> >>>> + device_type = "pci";
> >>>> + mediatek,mtd-eeprom = <&factory
> 0x8000>;
> >>>> + mediatek,2ghz = <0>;
> >>>> + };
> >>>> + };
> >>>> + };
> >>>> +
> >>>> + gpio-leds {
> >>>> + compatible = "gpio-leds";
> >>>> +
> >>>> + power {
> >>>> + label = "mzk-ex750np:red:power";
> >>>> + gpios = <&gpio0 14 1>;
> >>>> + };
> >>>> +
> >>>> + wifi {
> >>>> + label = "mzk-ex750np:red:wifi";
> >>>> + gpios = <&gpio3 0 1>;
> >>>> + };
> >>>> +
> >>>> + wps {
> >>>> + label = "mzk-ex750np:green:wps";
> >>>> + gpios = <&gpio0 10 1>;
> >>>> + };
> >>>> +
> >>>> + rep {
> >>>> + label = "mzk-ex750np:blue:rep";
> >>>> + gpios = <&gpio2 16 1>;
> >>>> + };
> >>>> +
> >>>> + wifi1 {
> >>>> + label = "mzk-ex750np:blue:wifi1";
> >>>> + gpios = <&gpio2 19 1>;
> >>>> + };
> >>>> +
> >>>> + wifi2 {
> >>>> + label = "mzk-ex750np:blue:wifi2";
> >>>> + gpios = <&gpio2 18 1>;
> >>>> + };
> >>>> +
> >>>> + wifi3 {
> >>>> + label = "mzk-ex750np:blue:wifi3";
> >>>> + gpios = <&gpio2 17 1>;
> >>>> + };
> >>>> + };
> >>>> +
> >>>> + gpio-keys-polled {
> >>>> + compatible = "gpio-keys-polled";
> >>>> + #address-cells = <1>;
> >>>> + #size-cells = <0>;
> >>>> + poll-interval = <20>;
> >>>> +
> >>>> + reset {
> >>>> + label = "reset";
> >>>> + gpios = <&gpio0 9 1>;
> >>>> + linux,code = <0x198>;
> >>>> + };
> >>>> +
> >>>> + wps {
> >>>> + label = "wps";
> >>>> + gpios = <&gpio0 13 0>;
> >>>> + linux,code = <0x211>;
> >>>> + };
> >>>> + };
> >>>> +};
> >>>> diff --git a/target/linux/ramips/image/mt7620.mk
> >>>> b/target/linux/ramips/image/mt7620.mk
> >>>> index 35cb46a..09c0ec2 100644
> >>>> --- a/target/linux/ramips/image/mt7620.mk
> >>>> +++ b/target/linux/ramips/image/mt7620.mk
> >>>> @@ -102,6 +102,7 @@ Image/Build/Profile/NA930=$(call
> >>>> BuildFirmware/CustomFlash/$(1),$(1),na930,NA930
> >>>> Image/Build/Profile/DB-WRT01=$(call
> >>>> BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01)
> >>>> Image/Build/Profile/MZK-750DHP=$(call
> >>>> BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
> >>>> Image/Build/Profile/MZK-EX300NP=$(call
> >>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP)
> >>>> +Image/Build/Profile/MZK-EX750NP=$(call
> >>>> BuildFirmware/Default8M/$(1),$(1),mzk-ex750np,MZK-EX750NP)
> >>>> Image/Build/Profile/HC5661=$(call
> >>>> BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661)
> >>>> Image/Build/Profile/HC5761=$(call
> >>>> BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761)
> >>>> Image/Build/Profile/HC5861=$(call
> >>>> BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861)
> >>>> @@ -149,6 +150,7 @@ define Image/Build/Profile/Default
> >>>> $(call Image/Build/Profile/DB-WRT01,$(1))
> >>>> $(call Image/Build/Profile/MZK-750DHP,$(1))
> >>>> $(call Image/Build/Profile/MZK-EX300NP,$(1))
> >>>> + $(call Image/Build/Profile/MZK-EX750NP,$(1))
> >>>> $(call Image/Build/Profile/NA930,$(1))
> >>>> $(call Image/Build/Profile/HC5661,$(1))
> >>>> $(call Image/Build/Profile/HC5761,$(1))
> >>>> diff --git a/target/linux/ramips/mt7620/profiles/planex.mk
> >>>> b/target/linux/ramips/mt7620/profiles/planex.mk
> >>>> index 157cf8d..f461aeb 100644
> >>>> --- a/target/linux/ramips/mt7620/profiles/planex.mk
> >>>> +++ b/target/linux/ramips/mt7620/profiles/planex.mk
> >>>> @@ -39,3 +39,14 @@ define Profile/MZK-EX300NP/Description
> >>>> Package set optimized for the Planex MZK-EX300NP.
> >>>> endef
> >>>> $(eval $(call Profile,MZK-EX300NP))
> >>>> +
> >>>> +
> >>>> +define Profile/MZK-EX750NP
> >>>> + NAME:=Planex MZK-EX750NP
> >>>> + PACKAGES:= kmod-mt76 kmod-mt7610e
> >>>> +endef
> >>>> +
> >>>> +define Profile/MZK-EX750NP/Description
> >>>> + Package set optimized for the Planex MZK-EX750NP.
> >>>> +endef
> >>>> +$(eval $(call Profile,MZK-EX750NP))
> >>>> --
> >>>> 1.9.1
> >>>> _______________________________________________
> >>>> openwrt-devel mailing list
> >>>> openwrt-devel at lists.openwrt.org
> >>>> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >>>
> >>>
> >>
> >>
> >> --
> >> ------------------------------------------------------
> >> ＠SRCHACK.ORG
> >> tochiro.srchack at gmail.com
> >> http://www.srchack.org/
> >> ------------------------------------------------------
> >> _______________________________________________
> >> openwrt-devel mailing list
> >> openwrt-devel at lists.openwrt.org
> >> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160428/221b595f/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list