[OpenWrt-Devel] [PATCH 6/9] ipq806x/base-files: Extract ath10k calibration data

[Darryl Sokoloski]

Signed-off-by: Josh Bendavid <joshbendavid at gmail.com>
[darryl at sokoloski.ca: submitting patches on behalf of Josh Bendavid]
Signed-off-by: Darryl Sokoloski <darryl at sokoloski.ca>
---
 .../etc/hotplug.d/firmware/11-ath10k-caldata       | 68 ++++++++++++++++++++++
 1 file changed, 68 insertions(+)
 create mode 100644 target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
new file mode 100644
index 0000000..5f604e1
--- /dev/null
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -0,0 +1,68 @@
+#!/bin/sh
+
+ath10kcal_die() {
+	echo "ath10cal: " "$*"
+	exit 1
+}
+
+ath10kcal_from_file() {
+	local source=$1
+	local offset=$2
+	local count=$3
+
+	dd if=$source of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath10kcal_die "failed to extract calibration data from $source"
+}
+
+ath10kcal_extract() {
+	local part=$1
+	local offset=$2
+	local count=$3
+	local mtd
+
+	mtd=$(find_mtd_chardev $part)
+	[ -n "$mtd" ] || \
+		ath10kcal_die "no mtd device found for partition $part"
+
+	dd if=$mtd of=/lib/firmware/$FIRMWARE bs=1 skip=$offset count=$count 2>/dev/null || \
+		ath10kcal_die "failed to extract calibration data from $mtd"
+}
+
+ath10kcal_patch_mac() {
+	local mac=$1
+
+	[ -z "$mac" ] && return
+
+	macaddr_2bin $mac | dd of=/lib/firmware/$FIRMWARE conv=notrunc bs=1 seek=6 count=6
+}
+
+[ -e /lib/firmware/$FIRMWARE ] && exit 0
+
+. /lib/ipq806x.sh
+. /lib/functions.sh
+. /lib/functions/system.sh
+
+board=$(ipq806x_board_name)
+
+
+case "$FIRMWARE" in
+"ath10k/cal-pci-0000:01:00.0.bin")
+	case $board in
+	c2600)
+		ath10kcal_extract "radio" 4096 12064
+# 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -1)
+		;;
+	esac
+	;;
+"ath10k/cal-pci-0001:01:00.0.bin")
+	case $board in
+	c2600)
+		ath10kcal_extract "radio" 20480 12064
+# 		ath10kcal_patch_mac $(macaddr_add $(mtd_get_mac_binary default-mac 8) -2)
+		;;
+	esac
+	;;
+*)
+	exit 1
+	;;
+esac
-- 
2.4.10
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel