[OpenWrt-Devel] [PATCH v3] ramips: Add support for ZBT WG3526
Kristian Evensen
kristian.evensen at gmail.com
Sat Apr 9 08:11:53 EDT 2016
From: Kristian Evensen <kristian.evensen at gmail.com>
The WG3526 is the follow-up to the 2626 and is mostly the same, with the
excaption that the mt7602 has been replaced with the mt7603. The internal wifi
setup has also changed slightly. Based on my tests, everything that worked on
the 2626 works on the 3526 and with roughly the same performance.
v1->v2:
* Remove some references to 2626 that I had missed in the dts.
v2->v3:
* Update patch to match new file structure.
* Removed SD driver to be consistent with other MT7621 targets.
Signed-off-by: Kristian Evensen <kristian.evensen at gmail.com>
---
.../linux/ramips/base-files/etc/board.d/02_network | 1 +
target/linux/ramips/base-files/etc/diag.sh | 3 +-
target/linux/ramips/base-files/lib/ramips.sh | 3 +
.../ramips/base-files/lib/upgrade/platform.sh | 1 +
target/linux/ramips/dts/ZBT-WG3526.dts | 127 +++++++++++++++++++++
target/linux/ramips/image/mt7621.mk | 6 +
target/linux/ramips/mt7621/profiles/zbt.mk | 13 +++
7 files changed, 153 insertions(+), 1 deletion(-)
create mode 100644 target/linux/ramips/dts/ZBT-WG3526.dts
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 4b65d36..36e9d3c 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -86,6 +86,7 @@ ramips_setup_interfaces()
wt1520|\
y1|\
zbt-wg2626|\
+ zbt-wg3526|\
youku-yk1)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "6 at eth0"
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh
index daa7fb1..9312a27 100644
--- a/target/linux/ramips/base-files/etc/diag.sh
+++ b/target/linux/ramips/base-files/etc/diag.sh
@@ -65,7 +65,8 @@ get_status_led() {
v11st-fe|\
vocore|\
wmr-300|\
- zbt-wg2626)
+ zbt-wg2626|\
+ zbt-wg3526)
status_led="$board:green:status"
;;
atp-52b|\
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index 5f1df7b..9a54361 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -505,6 +505,9 @@ ramips_board_detect() {
*"ZBT-WG2626")
name="zbt-wg2626"
;;
+ *"ZBT-WG3526")
+ name="zbt-wg3526"
+ ;;
*"ZBT-WR8305RT")
name="zbt-wr8305rt"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index c329dce..e9b8b8d 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -149,6 +149,7 @@ platform_check_image() {
zbt-wa05|\
zbt-we826|\
zbt-wg2626|\
+ zbt-wg3526|\
zbt-wr8305rt|\
zte-q7|\
youku-yk1)
diff --git a/target/linux/ramips/dts/ZBT-WG3526.dts b/target/linux/ramips/dts/ZBT-WG3526.dts
new file mode 100644
index 0000000..30b508c
--- /dev/null
+++ b/target/linux/ramips/dts/ZBT-WG3526.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+/ {
+ compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
+ model = "ZBT-WG3526";
+
+ memory at 0 {
+ device_type = "memory";
+ reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ sdhci at 10130000 {
+ status = "okay";
+ };
+
+ palmbus at 1E000000 {
+ spi at b00 {
+ status = "okay";
+
+ m25p80 at 0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ reg = <0 0>;
+ linux,modalias = "m25p80";
+ spi-max-frequency = <10000000>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition at 30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition at 40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition at 50000 {
+ label = "firmware";
+ reg = <0x50000 0xfb0000>;
+ };
+
+ };
+ };
+
+ i2c at 900 {
+ compatible = "ralink,i2c-mt7621";
+ reg = <0x900 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c_pins>;
+ status = "okay";
+ };
+ };
+
+ pcie at 1e140000 {
+ status = "okay";
+
+ pcie0 {
+ mt76 at 0,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ mediatek,5ghz = <0>;
+ };
+ };
+
+ pcie1 {
+ mt76 at 1,0 {
+ reg = <0x0000 0 0 0 0>;
+ device_type = "pci";
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ mediatek,2ghz = <0>;
+ };
+ };
+ };
+
+ ethernet at 1e100000 {
+ mtd-mac-address = <&factory 0xe000>;
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 18 1>;
+ linux,code = <0x198>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ status {
+ label = "zbt-wg3526:green:status";
+ gpios = <&gpio0 24 1>;
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
+ ralink,function = "gpio";
+ };
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 0732a44..0af9596 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -103,6 +103,12 @@ define Device/zbt-wg2626
endef
TARGET_DEVICES += zbt-wg2626
+define Device/zbt-wg3526
+ DTS := ZBT-WG3526
+ IMAGE_SIZE := $(ralink_default_fw_size_16M)
+endef
+TARGET_DEVICES += zbt-wg3526
+
define Device/wf-2881
DTS := WF-2881
BLOCKSIZE := 128KiB
diff --git a/target/linux/ramips/mt7621/profiles/zbt.mk b/target/linux/ramips/mt7621/profiles/zbt.mk
index 0073645..453687d 100644
--- a/target/linux/ramips/mt7621/profiles/zbt.mk
+++ b/target/linux/ramips/mt7621/profiles/zbt.mk
@@ -16,3 +16,16 @@ define Profile/ZBT-WG2626/Description
Package set for ZBT-WG2626 device
endef
$(eval $(call Profile,ZBT-WG2626))
+
+
+define Profile/ZBT-WG3526
+ NAME:=ZBT-WG3526 Device
+ PACKAGES:=\
+ kmod-usb-core kmod-usb3 \
+ kmod-ledtrig-usbdev kmod-ata-core kmod-ata-ahci
+endef
+
+define Profile/ZBT-WG3526/Description
+ Package set for ZBT-WG3526 device
+endef
+$(eval $(call Profile,ZBT-WG3526))
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list