[OpenWrt-Devel] [PATCHv5] ramips: add support for SamKnows SK-WB8
John Crispin
john at phrozen.org
Mon Apr 25 11:42:01 EDT 2016
i'm afraid they are both badly formatted
On 25/04/2016 16:51, Andrew Yong wrote:
> PATCHv1:
> This patch adds support for the SamKnows version 8.0 Whitebox, built
> around the MT7621 platform. 2.4GHz appears to be working, albeit
> poorly; 5GHz not working yet.
>
> PATCHv2:
> Fixed LED name in DTS.
>
> PATCHv3:
> DTS: Syntax error fixed, LEDs and buttons mapped correctly now
> - diag.sh updated to blink WPS LED on boot
> - 2.4GHz wifi is working but txpower is stuck at 0, DTS ROM offset
> matches SamKnows firmware
> - 5GHz wifi not working, DTS pcie1,0 matches SamKnows firmware
>
> PATCHv4:
> - I didn't commit some fixes in PATCHv3, that's fixed now
>
> PATCHv5:
> - Added preinit hook to reset SamKnows Whitebox 8 u-boot boot counter
> to prevent soft brick by booting into nonexistent backup partition
> - Broke 2.4GHz WiFi but 5GHz sorta works (swapped pcie0/1 in DTS,
> needs further investigation, effective txpower is still 0)
> - Experimenting on wifi but that'll be a future patch, board boots fine now.
>
> Signed-off-by: Andrew Yong <me at ndoo.sg>
>
> diff --git a/package/boot/uboot-envtools/files/ramips
> b/package/boot/uboot-envtools/files/ramips
> index a759bcc..9ad5974 100644
> --- a/package/boot/uboot-envtools/files/ramips
> +++ b/package/boot/uboot-envtools/files/ramips
> @@ -24,7 +24,8 @@ linkits7688d | \
> wsr-600 | \
> wsr-1166 | \
> br6425 | \
> -miwifi-nano)
> +miwifi-nano | \
> +sk-wb8)
> ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x1000" "0x10000"
> ;;
> esac
> diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds
> b/target/linux/ramips/base-files/etc/board.d/01_leds
> index e3b8500..df30085 100755
> --- a/target/linux/ramips/base-files/etc/board.d/01_leds
> +++ b/target/linux/ramips/base-files/etc/board.d/01_leds
> @@ -241,6 +241,9 @@ rt-n14u)
> set_wifi_led "$board:blue:air"
> set_usb_led "$board:blue:usb"
> ;;
> +sk-wb8)
> + set_usb_led "$board:green:usb"
> + ;;
> tiny-ac)
> set_wifi_led "$board:orange:wifi"
> set_usb_led "$board:green:usb"
> diff --git a/target/linux/ramips/base-files/etc/board.d/02_network
> b/target/linux/ramips/base-files/etc/board.d/02_network
> index 3c958ae..3e876d2 100755
> --- a/target/linux/ramips/base-files/etc/board.d/02_network
> +++ b/target/linux/ramips/base-files/etc/board.d/02_network
> @@ -77,6 +77,7 @@ ramips_setup_interfaces()
> pbr-m1|\
> psg1208|\
> sap-g3200u3|\
> + sk-wb8|\
> wf-2881|\
> whr-300hp2|\
> whr-600d|\
> @@ -310,6 +311,9 @@ ramips_setup_macs()
> lan_mac=$(macaddr_setbit_la "$lan_mac")
> wan_mac=$(mtd_get_mac_binary factory 32772)
> ;;
> + sk-wb8)
> + wan_mac=$(mtd_get_mac_binary factory 57350)
> + ;;
> tew-691gr)
> lan_mac=$(cat /sys/class/net/eth0/address)
> wan_mac=$(macaddr_add "$lan_mac" 3)
> diff --git a/target/linux/ramips/base-files/etc/diag.sh
> b/target/linux/ramips/base-files/etc/diag.sh
> index bd0ff05..534cc1c 100644
> --- a/target/linux/ramips/base-files/etc/diag.sh
> +++ b/target/linux/ramips/base-files/etc/diag.sh
> @@ -76,6 +76,7 @@ get_status_led() {
> ;;
> awapn2403|\
> dir-645|\
> + sk-wb8|\
> wrh-300cr)
> status_led="$board:green:wps"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/preinit/04_handle_bootcount
> b/target/linux/ramips/base-files/lib/preinit/04_handle_bootcount
> new file mode 100644
> index 0000000..570fe16
> --- /dev/null
> +++ b/target/linux/ramips/base-files/lib/preinit/04_handle_bootcount
> @@ -0,0 +1,22 @@
> +#!/bin/sh
> +
> +# SamKnows Whitebox 8 increments a bootcount variable every boot and attempts
> +# to boot a recovery partition when bootcount > 3. We need to ensure this is
> +# reset to 0 every boot
> +
> +do_bootcount_reset() {
> + . /lib/ramips.sh
> +
> + local board=$(ramips_board_name)
> +
> + case "$board" in
> + sk-wb8)
> + echo "Board is SamKnows Whitebox 8, resetting
> bootcount environment variable..."
> + fw_setenv bootcount 0
> + ;;
> + esac
> +
> + return 0
> +}
> +
> +boot_hook_add preinit_main do_bootcount_reset
> diff --git a/target/linux/ramips/base-files/lib/ramips.sh
> b/target/linux/ramips/base-files/lib/ramips.sh
> index 550ec55..5c1715d 100755
> --- a/target/linux/ramips/base-files/lib/ramips.sh
> +++ b/target/linux/ramips/base-files/lib/ramips.sh
> @@ -367,6 +367,9 @@ ramips_board_detect() {
> *"RUT5XX")
> name="rut5xx"
> ;;
> + *"SamKnows Whitebox 8")
> + name="sk-wb8"
> + ;;
> *"SAP-G3200U3")
> name="sap-g3200u3"
> ;;
> diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> index 73ba6e6..fcc1b79 100755
> --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
> +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
> @@ -109,6 +109,7 @@ platform_check_image() {
> rt-n56u|\
> rut5xx|\
> sap-g3200u3|\
> + sk-wb8|\
> sl-r7205|\
> tew-691gr|\
> tew-692gr|\
> diff --git a/target/linux/ramips/dts/SK-WB8.dts
> b/target/linux/ramips/dts/SK-WB8.dts
> new file mode 100644
> index 0000000..356a2b9
> --- /dev/null
> +++ b/target/linux/ramips/dts/SK-WB8.dts
> @@ -0,0 +1,121 @@
> +/dts-v1/;
> +
> +#include "mt7621.dtsi"
> +
> +/ {
> + compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
> + model = "SamKnows Whitebox 8";
> +
> + memory at 0 {
> + device_type = "memory";
> + reg = <0x0 0x4000000>;
> + };
> +
> + chosen {
> + bootargs = "console=ttyS0,57600";
> + };
> +
> + palmbus at 1E000000 {
> + spi at b00 {
> + status = "okay";
> +
> + m25p80 at 0 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "mx25l6405d";
> + reg = <0 0>;
> + linux,modalias = "m25p80";
> + spi-max-frequency = <10000000>;
> +
> + partition at 0 {
> + label = "u-boot";
> + reg = <0x0 0x30000>;
> + read-only;
> + };
> +
> + partition at 30000 {
> + label = "u-boot-env";
> + reg = <0x30000 0x10000>;
> + };
> +
> + factory: partition at 40000 {
> + label = "factory";
> + reg = <0x40000 0x10000>;
> + read-only;
> + };
> +
> + partition at 50000 {
> + label = "firmware";
> + reg = <0x50000 0x7b0000>;
> + };
> +
> + };
> + };
> + };
> +
> + pcie at 1e140000 {
> + status = "okay";
> +
> + pcie0 {
> + mt76 at 0,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x0000>;
> + mediatek,5ghz = <0>;
> + };
> + };
> +
> + pcie1 {
> + mt76 at 1,0 {
> + reg = <0x0000 0 0 0 0>;
> + device_type = "pci";
> + mediatek,mtd-eeprom = <&factory 0x8000>;
> + mediatek,2ghz = <0>;
> + };
> + };
> + };
> +
> + ethernet at 1e100000 {
> + mtd-mac-address = <&factory 0xe000>;
> + };
> +
> + gpio-leds {
> + compatible = "gpio-leds";
> +
> + wps {
> + label = "sk-wb8:green:wps";
> + gpios = <&gpio1 14 1>;
> + };
> +
> + usb {
> + label = "sk-wb8:green:usb";
> + gpios = <&gpio1 15 1>;
> + };
> + };
> +
> + gpio-keys-polled {
> + compatible = "gpio-keys-polled";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + poll-interval = <20>;
> + wps {
> + label = "wps";
> + gpios = <&gpio1 11 1>;
> + linux,code = <0x211>;
> + };
> + reset {
> + label = "reset";
> + gpios = <&gpio1 9 1>;
> + linux,code = <0x198>;
> + };
> + };
> +
> + pinctrl {
> + state_default: pinctrl0 {
> + gpio {
> + ralink,group = "i2c", "uart2",
> "uart3", "rgmii2", "sdhci";
> + ralink,function = "gpio";
> + };
> + };
> + };
> +};
> diff --git a/target/linux/ramips/image/mt7621.mk
> b/target/linux/ramips/image/mt7621.mk
> index 0af9596..3e2f7eb 100644
> --- a/target/linux/ramips/image/mt7621.mk
> +++ b/target/linux/ramips/image/mt7621.mk
> @@ -132,6 +132,12 @@ define Device/ubnt-erx
> endef
> TARGET_DEVICES += ubnt-erx
>
> +define Device/sk-wb8
> + DTS := SK-WB8
> + IMAGE_SIZE := $(ralink_default_fw_size_16M)
> +endef
> +TARGET_DEVICES += sk-wb8
> +
> # FIXME: is this still needed?
> define Image/Prepare
> #define Build/Compile
> diff --git a/target/linux/ramips/mt7621/profiles/sk-wb8.mk
> b/target/linux/ramips/mt7621/profiles/sk-wb8.mk
> new file mode 100644
> index 0000000..4b22ef3
> --- /dev/null
> +++ b/target/linux/ramips/mt7621/profiles/sk-wb8.mk
> @@ -0,0 +1,18 @@
> +#
> +# Copyright (C) 2015 OpenWrt.org
> +#
> +# This is free software, licensed under the GNU General Public License v2.
> +# See /LICENSE for more information.
> +#
> +
> +define Profile/SK-WB8
> + NAME:=SK-WB8 Profile
> + PACKAGES:=\
> + kmod-usb-core kmod-usb3 \
> + kmod-ledtrig-usbdev uboot-envtools
> +endef
> +
> +define Profile/SK-WB8/Description
> + Package set optimized for the SamKnows SK-WB8.
> +endef
> +$(eval $(call Profile,SK-WB8))
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list