[OpenWrt-Devel] [PATCH] lantiq: VG3503J - use the same PHY led functionality as the OEM firmware

[Mathias Kresin]

Based on the vg3503j_gphy_led.sh script published in the VG3503J wiki
article, the OEM Firmware uses the following PHY led functionality:

    gphy led 0: LINK/ACTIVITY
    gphy led 1: LINK
    gphy led 2: ACTIVITY

Signed-off-by: Mathias Kresin <openwrt at kresin.me>
---
 target/linux/lantiq/dts/VG3503J.dtsi | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/target/linux/lantiq/dts/VG3503J.dtsi b/target/linux/lantiq/dts/VG3503J.dtsi
index 780d838..62a336c 100644
--- a/target/linux/lantiq/dts/VG3503J.dtsi
+++ b/target/linux/lantiq/dts/VG3503J.dtsi
@@ -153,18 +153,18 @@
 		phy11: ethernet-phy at 11 {
 			reg = <0x11>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led0h = <0x42>;
-			lantiq,led0l = <0x10>;
-			lantiq,led2h = <0x20>;
-			lantiq,led2l = <0x00>;
+			lantiq,led1h = <0x70>;
+			lantiq,led1l = <0x00>;
+			lantiq,led2h = <0x00>;
+			lantiq,led2l = <0x03>;
 		};
 		phy13: ethernet-phy at 13 {
 			reg = <0x13>;
 			compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
-			lantiq,led0h = <0x42>;
-			lantiq,led0l = <0x10>;
-			lantiq,led2h = <0x20>;
-			lantiq,led2l = <0x00>;
+			lantiq,led1h = <0x70>;
+			lantiq,led1l = <0x00>;
+			lantiq,led2h = <0x00>;
+			lantiq,led2l = <0x03>;
 		};
 	};
 };
-- 
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel