January 2016 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri Jan 1 15:33:49 EST 2016
Ending: Sun Jan 31 18:49:58 EST 2016
Messages: 965

• [OpenWrt-Devel] [PATCH 2/4] lantiq: Add support for linux 4.4   John Crispin
• [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M   Russell Senior
  • [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M   John Crispin
    • [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M   Russell Senior
  • [OpenWrt-Devel] ramips: mtk_soc_eth vs old ralink ethernet driver for the M2M   Paul Greidanus
• [OpenWrt-Devel] [PATCH] base-files: fix generating network configuration   Yousong Zhou
• [OpenWrt-Devel] [PATCH] kernel: generic 4.1 & 4.4 perf: musl compatibility   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] kernel: generic 4.1 & 4.4 perf: musl compatibility   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] kernel: generic 4.1 & 4.4 perf: musl compatibility   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] add ubifs filesystem for image building system   RhoYounJae
  • [OpenWrt-Devel] [PATCH] add ubifs filesystem for image building system   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] add ubifs filesystem for image building system   Daniel Golle
      • [OpenWrt-Devel] [PATCH] add ubifs filesystem for image building system   Felix Fietkau
• [OpenWrt-Devel] [PATCH] malta: fix generating network configuration   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ar71xx: another fix to wndr3700_board_detect   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] export KERNEL_INITRAMFS_IMAGE   RhoYounJae
  • [OpenWrt-Devel] [PATCH] export KERNEL_INITRAMFS_IMAGE   Felix Fietkau
    • [OpenWrt-Devel] [PATCH v2] export KERNEL_INITRAMFS_IMAGE   YounJae Rho
      • [OpenWrt-Devel] [PATCH v2] export KERNEL_INITRAMFS_IMAGE   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v3] export KERNEL_INITRAMFS_IMAGE   YounJae Rho
      • [OpenWrt-Devel] [PATCH v4] export KERNEL_INITRAMFS_IMAGE   YounJae Rho
      • [OpenWrt-Devel] [PATCH v4] export KERNEL_INITRAMFS_IMAGE   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v5] export KERNEL_INITRAMFS_IMAGE   YounJae Rho
• [OpenWrt-Devel] [PATCH] busybox: include config files relative to serveral Config.in   Wensheng Tang
  • [OpenWrt-Devel] [PATCH] busybox: include config files relative to serveral Config.in   Felix Fietkau
• [OpenWrt-Devel] [PATCH 00/14] Build system improvements   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 01/14] target/toolchain: Fix tarball filename   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 02/14] targets: Use configured distribution name for SDK, IB, and Toolchain tarball names   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 03/14] images: use configured distribution name for output image names   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 04/14] images imagebuilder: Allow to add sanitized extra name   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 05/14] target/sdk: Fix filename with external toolchain   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 06/14] toolchain: Allow to set libc type for external toolchains   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 06/14] toolchain: Allow to set libc type for external toolchains   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 07/14] toolchain sdk ib: Allow use of external chain as with openwrt toolchain   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 08/14] targets images: Add a version 'flavour'   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 09/14] package/signing-key base-files: Move the package list signing key to separate package   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 09/14] package/signing-key base-files: Move the package list signing key to separate package   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 10/14] config: Move version configuration out of base-files   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 11/14] target/imagebuilder: Add ability to menuconfig image options   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 11/14] target/imagebuilder: Add ability to menuconfig image options   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 12/14] target/sdk: Fix handling of already built packages   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 12/14] target/sdk: Fix handling of already built packages   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 12/14] target/sdk: Fix handling of already built packages   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH 12/14] target/sdk: Fix handling of already built packages   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 13/14] target/sdk: Allow building a more complete SDK from within an SDK   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 13/14] target/sdk: Allow building a more complete SDK from within an SDK   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 14/14] target/sdk: Allow building buildroot + kernel only SDK/IB   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 14/14] target/sdk: Allow building buildroot + kernel only SDK/IB   Felix Fietkau
• [OpenWrt-Devel] Order of email arrival @ mailing list software results in bad threading in archive   Daniel Dickinson
• [OpenWrt-Devel] dev.openwrt.org not sending emails   Rafał Miłecki
• [OpenWrt-Devel] mvebu: fix LED's module   Sebastian Careba
• [OpenWrt-Devel] mvebu: fix WRT1900AC v1 LED driver module   Sebastian Careba
• [OpenWrt-Devel] Board detection for Lamobo R1 fails again   Vasco Steinmetz
  • [OpenWrt-Devel] Board detection for Lamobo R1 fails again   Vasco Steinmetz
  • [OpenWrt-Devel] Board detection for Lamobo R1 fails again   Zoltan HERPAI
    • [OpenWrt-Devel] Board detection for Lamobo R1 fails again   Vasco Steinmetz
• [OpenWrt-Devel] [PATCH v4 1/4] [CC] ramips: Fix whitespace in the rt3052 switch driver.   John Crispin
  • [OpenWrt-Devel] [PATCH v4 1/4] [CC] ramips: Fix whitespace in the rt3052 switch driver.   Vittorio G (VittGam)
    • [OpenWrt-Devel] [PATCH v4 1/4] [CC] ramips: Fix whitespace in the rt3052 switch driver.   John Crispin
      • [OpenWrt-Devel] [PATCH v4 1/4] [CC] ramips: Fix whitespace in the rt3052 switch driver.   Vittorio G (VittGam)
• [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
  • [OpenWrt-Devel] SDK vs. Toolchain+   Felix Fietkau
    • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Felix Fietkau
      • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Joris de Vries
      • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Emmanuel Deloget
      • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Felix Fietkau
      • [OpenWrt-Devel] SDK vs. Toolchain+   Bastian Bittorf
      • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Felix Fietkau
      • [OpenWrt-Devel] SDK vs. Toolchain+   Daniel Dickinson
      • [OpenWrt-Devel] SDK vs. Toolchain+   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v4 1/4] [CC] [RESEND] ramips: Fix whitespace in the rt3052 switch driver.   Vittorio G (VittGam)
• [OpenWrt-Devel] SHA512/SHA256 hashes truncated/busybox weirdness   Chris Marchesi
  • [OpenWrt-Devel] SHA512/SHA256 hashes truncated/busybox weirdness   Felix Fietkau
  • [OpenWrt-Devel] SHA512/SHA256 hashes truncated/busybox weirdness   Nikos Mavrogiannopoulos
• [OpenWrt-Devel] Outstanding patches question (WNDR3700v4|WNDR4300 128MB flash and px5g SHA256 MD certs)   Chris Marchesi
  • [OpenWrt-Devel] Outstanding patches question (WNDR3700v4|WNDR4300 128MB flash and px5g SHA256 MD certs)   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/1] package/libs/libtool: package libtool   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 1/1] package/libs/libtool: rename to libltdl   Heinrich Schuchardt
    • [OpenWrt-Devel] [PATCH 1/1 v2] package/libs/libtool: rename to libltdl   Heinrich Schuchardt
      • [OpenWrt-Devel] [PATCH 1/1 v2] package/libs/libtool: rename to libltdl   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 1/1 v2] package/libs/libtool: rename to libltdl   Heinrich Schuchardt
      • [OpenWrt-Devel] [PATCH 1/1 v2] package/libs/libtool: rename to libltdl   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 1/1 v3] package/libs/libtool: rename to libltdl   Heinrich Schuchardt
      • [OpenWrt-Devel] [PATCH 1/1 v3] package/libs/libtool: rename to libltdl   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH 1/1 v4] package/libs/libtool: rename to libltdl   Heinrich Schuchardt
• [OpenWrt-Devel] [PATCH] add UCI option for leasetime per static host   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] add UCI option for leasetime per static host   Hannu Nyman
• [OpenWrt-Devel] [PATCH RESEND] dnsmasq: add config option for ra_names   Felix Fietkau
  • [OpenWrt-Devel] [PATCH RESEND] dnsmasq: add config option for ra_names   Dominique Martinet
    • [OpenWrt-Devel] [PATCH RESEND] dnsmasq: add config option for ra_names   Dominique Martinet
      • [OpenWrt-Devel] [PATCH RESEND] dnsmasq: add config option for ra_names   Felix Fietkau
      • [OpenWrt-Devel] [PATCH RESEND] dnsmasq: add config option for ra_names   Dominique Martinet
      • [OpenWrt-Devel] [PATCH RESEND] dnsmasq: add config option for ra_names   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH v2] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Felix Fietkau
  • [OpenWrt-Devel] [PATCH v2] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Daniel Golle
    • [OpenWrt-Devel] [PATCH v2] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v3] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Daniel Golle
      • [OpenWrt-Devel] [PATCH v3] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v3] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Daniel Golle
      • [OpenWrt-Devel] [PATCH v3] wpa_supplicant: fix generating phase2 config line for WPA-EAP   Felix Fietkau
      • [OpenWrt-Devel] [PATCH v4] wpa_supplicant: improve generating phase2 config line for WPA-EAP   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/3] ipq806x: add support for TP-Link Archer C2600 image building and ath10k initialization   John Crispin
• [OpenWrt-Devel] [PATCH] mac80211: bypass otp check in ath10k initialization (needed for TP-Link Archer C2600)   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
  • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
    • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   John Crispin
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   John Crispin
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   John Crispin
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
  • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
    • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   John Crispin
      • [OpenWrt-Devel] [PATCH] Add support for Netgear D7800   Tathagata Das
• [OpenWrt-Devel] [PATCH] Allow scan of single channel   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [ar71xx] Support for Ubiquiti UniFi AP AC LITE   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] [ar71xx] Support for Ubiquiti UniFi AP AC LITE   p.wassi at gmx.at
    • [OpenWrt-Devel] [PATCH] [ar71xx] Support for Ubiquiti UniFi AP AC LITE   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] [ar71xx] Support for Ubiquiti UniFi AP AC LITE   p.wassi at gmx.at
      • [OpenWrt-Devel] [PATCH] [ar71xx] Support for Ubiquiti UniFi AP AC LITE   John Crispin
• [OpenWrt-Devel] [PATCH] images: Add option to build tar.gz suitable for use as LXC guest rootfs   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/3] ipq806x: add support for TP-Link Archer C2600 to makefiles, configs, scripts and device tree   Josh Bendavid
  • [OpenWrt-Devel] [PATCH 1/3] ipq806x: add support for TP-Link Archer C2600 to makefiles, configs, scripts and device tree   John Crispin
• [OpenWrt-Devel] [PATCH 2/3] firmware-utils: add support for TP-Link Archer C2600 to tplink-safeloader   Josh Bendavid
• [OpenWrt-Devel] [PATCH 1/6] iw: update to version 4.3   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] ramips: set mips16 support   Cristian Morales Vega
  • [OpenWrt-Devel] [PATCH] ramips: set mips16 support   José Vázquez
    • [OpenWrt-Devel] [PATCH] ramips: set mips16 support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] ramips: set mips16 support   Cristian Morales Vega
• [OpenWrt-Devel] Need help with Makefile error *** missing separator   Andy Wong
  • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Jo-Philipp Wich
    • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Andy Wong
      • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Andy Wong
      • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Luiz Angelo Daros de Luca
      • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Andy Wong
      • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Yousong Zhou
      • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Jo-Philipp Wich
      • [OpenWrt-Devel] Need help with Makefile error *** missing separator   Andy Wong
• [OpenWrt-Devel] git.nbd.name is down: ubox git not accessible   Christian Mehlis
  • [OpenWrt-Devel] git.nbd.name is down: ubox git not accessible   John Crispin
  • [OpenWrt-Devel] git.nbd.name is down: ubox git not accessible   Felix Fietkau
• [OpenWrt-Devel] Probably a delay in further updates   Daniel Dickinson
  • [OpenWrt-Devel] Probably a delay in further updates   tapper
• [OpenWrt-Devel] [PATCH] samba36: add three CVE patches from 2015-12-16   Jan Čermák
• [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   Amine Aouled Hamed
  • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   Jo-Philipp Wich
  • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   amine ahd
    • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   John Crispin
      • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   David Lang
  • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   amine ahd
    • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] use NTP server received via DHCP   Amine Aouled Hamed
• [OpenWrt-Devel] [PATCH] procd: emit events for sound subsystem   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] dnsmasq: add host-specific lease time option for static hosts   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/2] lldpd: fix reload function for when interfaces change   Alexandru Ardelean
  • [OpenWrt-Devel] [PATCH 2/2] lldpd: add /lib/lldpd.unconf file for reload   Alexandru Ardelean
• [OpenWrt-Devel] configurable opkg repos patch not needed   Daniel Dickinson
• [OpenWrt-Devel] New "Security" wiki page. Improvements/corrections appreciated   Eric Schultz
• [OpenWrt-Devel] [PATCH] ar8327: add IGMP Snooping support   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH] ar8327: add IGMP Snooping support   Linus Lüssing
    • [OpenWrt-Devel] [PATCH] ar8327: add IGMP Snooping support   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH v2] ar8327: add IGMP Snooping support   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH v2] ar8327: add IGMP Snooping support   Felix Fietkau
    • [OpenWrt-Devel] [PATCH v3] ar8327: add IGMP Snooping support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] swconfig: support setting SWITCH_TYPE_LINK attributes   Stefan Rompf
  • [OpenWrt-Devel] [PATCH] swconfig: support setting SWITCH_TYPE_LINK attributes   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] swconfig: support setting SWITCH_TYPE_LINK attributes   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] swconfig: support setting SWITCH_TYPE_LINK attributes   Stefan Rompf
      • [OpenWrt-Devel] [PATCH] swconfig: support setting SWITCH_TYPE_LINK attributes   Florian Fainelli
• [OpenWrt-Devel] ca-certificates: update to version 20160104   Christian Schoenebeck
• [OpenWrt-Devel] Ath10k CT openwrt patches   Mhlanga Bothin
  • [OpenWrt-Devel] Ath10k CT openwrt patches   Ben Greear
• [OpenWrt-Devel] AE4500 Wifi dropouts   tapper
• [OpenWrt-Devel] Mikrotik RB411 kernel dos not boot in trunk   smilebef at gmail.com
  • [OpenWrt-Devel] Mikrotik RB411 kernel dos not boot in trunk   Damian Kaczkowski
    • [OpenWrt-Devel] and what is with RB433UL ?   smilebef at gmail.com
      • [OpenWrt-Devel] and what is with RB433UL ?   smilebef at gmail.com
• [OpenWrt-Devel] [PATCH 1/2] b53: add internal API for accessing PHY regs   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 2/2] b53: support setting port link state   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH 2/2] b53: support setting port link state   Jonas Gorski
  • [OpenWrt-Devel] [PATCH 1/2] b53: add internal API for accessing PHY regs   Jonas Gorski
• [OpenWrt-Devel] [PATCH] Add @APACHE download facility   Heinrich Schuchardt
  • [OpenWrt-Devel] [PATCH] Add @APACHE download facility   Heinrich Schuchardt
• [OpenWrt-Devel] [PATCH 1/1] KernelPackage/usb-net-sr9700: new package   Heinrich Schuchardt
• [OpenWrt-Devel] [PATCH 1/4] base-files: add option to specify netdev led mode in configuration generation   Tal Keren
  • [OpenWrt-Devel] [PATCH 2/4] firmware-utils: add support for TP-Link RE450 for tplink-safeload   Tal Keren
    • [OpenWrt-Devel] [PATCH 2/4] firmware-utils: add support for TP-Link RE450 for tplink-safeload   John Crispin
  • [OpenWrt-Devel] [PATCH 3/4] firmware-utils: kernel image generator for TP-Link RE450   Tal Keren
    • [OpenWrt-Devel] [PATCH 3/4] firmware-utils: kernel image generator for TP-Link RE450   John Crispin
      • [OpenWrt-Devel] [PATCH 3/4] firmware-utils: kernel image generator for TP-Link RE450   Tal Keren
  • [OpenWrt-Devel] [PATCH 4/4] a71xx: add support for TP-Link RE450   Tal Keren
    • [OpenWrt-Devel] [PATCH 4/4] a71xx: add support for TP-Link RE450   John Crispin
  • [OpenWrt-Devel] [PATCH 1/4] base-files: add option to specify netdev led mode in configuration generation   John Crispin
  • [OpenWrt-Devel] [PATCH 1/4] base-files: add option to specify netdev led mode in configuration generation   Jo-Philipp Wich
    • [OpenWrt-Devel] [PATCH 1/4] base-files: add option to specify netdev led mode in configuration generation   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 1/1] [DEV-1329] use NTP server received via DHCP   amine ahd
  • [OpenWrt-Devel] [PATCH 1/1] [DEV-1329] use NTP server received via DHCP   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH 1/1] [DEV-1329] use NTP server received via DHCP   Amine Aouled Hamed
      • [OpenWrt-Devel] [PATCH 1/1] [DEV-1329] use NTP server received via DHCP   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH 1/1] [DEV-1329] use NTP server received via DHCP   Amine Aouled Hamed
• [OpenWrt-Devel] Kudos to Felix (some interesting numbers for ar71xx)   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] perf: drop @!USE_UCLIBC from depends   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Nemesis
  • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Nemesis
  • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   nemesis at ninux.org
    • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   nemesis at ninux.org
    • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] openvpn: added service_triggers() to init script   nemesis at ninux.org
• [OpenWrt-Devel] [RFC] [zynq] Add new target zynq   Jason Wu
• [OpenWrt-Devel] [PATCH] netifd: Do not add local/source policy rules multiple times   Kristian Evensen
• [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   amine ahd
  • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   amine ahd
    • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Amine Aouled Hamed
  • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   amine ahd
    • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Amine Aouled Hamed
      • [OpenWrt-Devel] [PATCH 1/1] use NTP server received via DHCP   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] Turn off VLAN support on MT7620 to get Failsafe working   probono
• [OpenWrt-Devel] Atomic/failsafe upgrades?   Joshua Judson Rosen
  • [OpenWrt-Devel] Atomic/failsafe upgrades?   Daniel Dickinson
  • [OpenWrt-Devel] Atomic/failsafe upgrades?   Eric Schultz
    • [OpenWrt-Devel] Atomic/failsafe upgrades?   Arthur Davis
      • [OpenWrt-Devel] Atomic/failsafe upgrades?   Luiz Angelo Daros de Luca
    • [OpenWrt-Devel] Atomic/failsafe upgrades?   Petr Štetiar
• [OpenWrt-Devel] [PATCH 1/1] package/libs/zlib: new package zlib-dev   Heinrich Schuchardt
  • [OpenWrt-Devel] [PATCH 1/1] package/libs/zlib: new package zlib-dev   Felix Fietkau
    • [OpenWrt-Devel] [PATCH 1/1] package/libs/zlib: new package zlib-dev   Heinrich Schuchardt
• [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Conn O'Griofa
  • [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Conn O'Griofa
      • [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Conn O'Griofa
      • [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Conn O'Griofa
      • [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Conn O'Griofa
      • [OpenWrt-Devel] [PATCH] ar71xx: check for stuck DMA on AR724x & fix sirq storm after recovery   Felix Fietkau
• [OpenWrt-Devel] Question Re: Sourceful SDK   Daniel Dickinson
  • [OpenWrt-Devel] Question Re: Sourceful SDK   Daniel Dickinson
  • [OpenWrt-Devel] Question Re: Sourceful SDK   Daniel Dickinson
    • [OpenWrt-Devel] Question Re: Sourceful SDK   Daniel Dickinson
      • [OpenWrt-Devel] Question Re: Sourceful SDK   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] kernel: Add kernel module for Freescale SNVS RTC on chip module   Petr Štetiar
  • [OpenWrt-Devel] [PATCH] kernel: Add kernel module for Freescale SNVS RTC on chip module   Felix Fietkau
  • [OpenWrt-Devel] [PATCH v2] kernel: Add kernel module for Freescale SNVS RTC on chip module   Petr Štetiar
    • [OpenWrt-Devel] [PATCH v3] kernel: Add kernel module for Freescale SNVS RTC on chip module   Petr Štetiar
• [OpenWrt-Devel] [PATCH] imx6: kernel: Add Micrel PHY used on Apalis SOM   Petr Štetiar
  • [OpenWrt-Devel] [PATCH] imx6: kernel: Add Micrel PHY used on Apalis SOM   Tim Harvey
• [OpenWrt-Devel] [PATCH] fstools: Check FS state before writing   Wojciech Dubowik
  • [OpenWrt-Devel] [PATCH] fstools: Check FS state before writing   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] fstools: Check FS state before writing   Felix Fietkau
• [OpenWrt-Devel] Description of the old packages repo at git.openwrt.org should be changed to "oldpackages"   Hannu Nyman
  • [OpenWrt-Devel] Description of the old packages repo at git.openwrt.org should be changed to "oldpackages"   Felix Fietkau
• [OpenWrt-Devel] [PATCH] imx6: backport upstream patch to fix pwm pinmux for GW51xx/GW52xx/GW53xx   Tim Harvey
• [OpenWrt-Devel] [PATCH] imx6: fix upstream patch name   Tim Harvey
• [OpenWrt-Devel] [PATCH] dnsmasq: add dhcp relay option   dbugnar
  • [OpenWrt-Devel] [PATCH] dnsmasq: add dhcp relay option   John Crispin
    • [OpenWrt-Devel] [PATCH] dnsmasq: add dhcp relay option   Dan Bugnar
  • [OpenWrt-Devel] [PATCH] dnsmasq: add dhcp relay option   Bugnar Dan
• [OpenWrt-Devel] Even better rebuild times coming   Daniel Dickinson
  • [OpenWrt-Devel] Even better rebuild times coming   Joseph Marlin
• [OpenWrt-Devel] Problem with commit to prevent SDK from altering kernel modules   Daniel Dickinson
  • [OpenWrt-Devel] Problem with commit to prevent SDK from altering kernel modules   Felix Fietkau
• [OpenWrt-Devel] [CC 15.05] libpng: Security update (2 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [BB 14.07] libpng: Security update (3 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH] tools/cmake: update version to 3.4.1   Hannu Nyman
• [OpenWrt-Devel] optimizing network performance   Roman Yeryomin
  • [OpenWrt-Devel] optimizing network performance   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ar71xx: fix ap152 support   Roman Yeryomin
• [OpenWrt-Devel] I'd like to donate an Apple Airport Express A1264   Alex Henrie
  • [OpenWrt-Devel] I'd like to donate an Apple Airport Express A1264   Boken Lin
    • [OpenWrt-Devel] I'd like to donate an Apple Airport Express A1264   Alex Henrie
• [OpenWrt-Devel] Recent libtool to libltdl subdir name change   Daniel Dickinson
  • [OpenWrt-Devel] Recent libtool to libltdl subdir name change   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] include/autotools.mk: rename libtool to libltdl   Heinrich Schuchardt
  • [OpenWrt-Devel] [PATCH 1/1] include/autotools.mk: rename libtool to libltdl   Daniel Dickinson
    • [OpenWrt-Devel] [PATCH 1/1] include/autotools.mk: rename libtool to libltdl   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH 1/1] include/autotools.mk: rename libtool to libltdl   Daniel Dickinson
  • [OpenWrt-Devel] [PATCH 1/1] include/autotools.mk: rename libtool to libltdl   Daniel Dickinson
  • [OpenWrt-Devel] [PATCH 1/1] include/autotools.mk: rename libtool to libltdl   Felix Fietkau
• [OpenWrt-Devel] Help with sysupgrade/factory images for YunCore CPE-880 (ar71xx)   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH] brcm2708: fix RPi model B plus support   Roman Yeryomin
  • [OpenWrt-Devel] [PATCH] brcm2708: fix RPi model B plus support   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] brcm2708: fix RPi model B plus support   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH] brcm2708: fix RPi model B plus support   Roman Yeryomin
• [OpenWrt-Devel] IGNORE_PACKAGES in scan.mk break out-of-tree kernel module builds   Daniel Dickinson
• [OpenWrt-Devel] Additional dependency on dirname == PKG_NAME   Daniel Dickinson
  • [OpenWrt-Devel] Additional dependency on dirname == PKG_NAME   Daniel Dickinson
    • [OpenWrt-Devel] Additional dependency on dirname == PKG_NAME   Daniel Dickinson
• [OpenWrt-Devel] WNDR3700v4 WAN LED not properly displaying netif state   Chris Marchesi
  • [OpenWrt-Devel] WNDR3700v4 WAN LED not properly displaying netif state   Chris Marchesi
• [OpenWrt-Devel] [PATCH] package/libs/polarssl: Download location has moved and redirect is wrong   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH] package/libs/polarssl: Download location has moved and redirect is wrong   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] package/libs/polarssl: Download location has moved and redirect is wrong   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   John Crispin
    • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Gert Doering
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   John Crispin
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Holger Levsen
  • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
    • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
    • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] base-files: For sysfixtime use hwclock if RTC available   Lars Kruse
• [OpenWrt-Devel] Apologies   Daniel Dickinson
  • [OpenWrt-Devel] Apologies   Sami Olmari
    • [OpenWrt-Devel] Apologies   Daniel Dickinson
• [OpenWrt-Devel] <sigh> never post cranky   Daniel Dickinson
  • [OpenWrt-Devel] <sigh> never post cranky   Holger Levsen
• [OpenWrt-Devel] Convincing vim on Fedora to highlight 'bad' whitespace   Daniel Dickinson
  • [OpenWrt-Devel] Convincing vim on Fedora to highlight 'bad' whitespace   Hartmut Knaack
    • [OpenWrt-Devel] Convincing vim on Fedora to highlight 'bad' whitespace   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Eric Schultz
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Daniel Dickinson
    • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Felix Fietkau
      • [OpenWrt-Devel] Improving ALL and ALL_KMODS (was Re: [PATCH] scripts/metadata: Allow to select which profiles to build)   Daniel Dickinson
      • [OpenWrt-Devel] Improving ALL and ALL_KMODS (was Re: [PATCH] scripts/metadata: Allow to select which profiles to build)   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] scripts/metadata: Allow to select which profiles to build   Felix Fietkau
• [OpenWrt-Devel] Confirmed polarssl patch is unnecessary   Daniel Dickinson
• [OpenWrt-Devel] Has buildbot died? lost its schedule?   Hannu Nyman
• [OpenWrt-Devel] [PATCH] kernel: Update kernel 4.4 to 4.4.0   Martin Blumenstingl
• [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Hannu Nyman
  • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   John Crispin
    • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Hannu Nyman
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   John Crispin
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   alzhao
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Rafał Miłecki
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   alzhao
      • [OpenWrt-Devel] The state of mwl8k   tapper
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Nishant Sharma
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   Jo-Philipp Wich
    • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   John Crispin
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   alzhao
      • [OpenWrt-Devel] Plans for CC 15.05.1 or DD 16.xx release?   John Crispin
• [OpenWrt-Devel] [CC 15.05] samba: Security update (3 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] uci commit bumping amount of dentry active slab objects   Rafał Miłecki
  • [OpenWrt-Devel] uci commit bumping amount of dentry active slab objects   Felix Fietkau
    • [OpenWrt-Devel] uci commit bumping amount of dentry active slab objects   Felix Fietkau
• [OpenWrt-Devel] [PATCH] lantiq: Change the xbar register range to match the datasheet   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH] lantiq: Change the xbar register range to match the datasheet   John Crispin
    • [OpenWrt-Devel] [PATCH] lantiq: Change the xbar register range to match the datasheet   Martin Blumenstingl
      • [OpenWrt-Devel] [PATCH] lantiq: Change the xbar register range to match the datasheet   John Crispin
• [OpenWrt-Devel] [BB 14.07] samba: Security update (3 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 1/3] lantiq: Add support for linux 4.4   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 2/3] lantiq: ltq-deu: Make the DEU driver compatible with linux 4.2 and newer   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 3/3] lantiq: ltq-deu: Remove the "DEU test manager"   Martin Blumenstingl
    • [OpenWrt-Devel] [PATCH 3/3] lantiq: ltq-deu: Remove the "DEU test manager"   Felix Fietkau
  • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
    • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Daniel Schwierzeck
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Daniel Schwierzeck
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Daniel Schwierzeck
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Daniel Schwierzeck
      • [OpenWrt-Devel] lantiq: Initial linux 4.4 support (with SPI problems)   Martin Blumenstingl
• [OpenWrt-Devel] Fwd: [OpenWrt] #21573: hostapd: Full Dynamic VLAN support - vlan_bridge name list   Vincent Fortier
• [OpenWrt-Devel] [OpenWrt-Commits] r48171 - trunk/include   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/2] target/sdk: Do not allow SDK to reconfigure already built packages   Daniel Dickinson
  • [OpenWrt-Devel] [PATCH 1/2] target/sdk: Do not allow SDK to reconfigure already built packages   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
  • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
    • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
      • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
      • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
      • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
      • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Eric Schultz
      • [OpenWrt-Devel] [PATCH 1/1] [ar71xx] Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4   Chris Marchesi
• [OpenWrt-Devel] [CC 15.05] ruby: Security update (CVE-2015-7551)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH] dropbear: update version to 2015.71   Hannu Nyman
• [OpenWrt-Devel] [PATCH] kernel: add missing symbols for Kernel 4.4   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH, v2] kernel: remove obsolete config symbols from 4.4   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] ramips: fix serial baudrate for final version of ZBT-WG2626 board   Daniel Golle
• [OpenWrt-Devel] [PATCH] ramips: fix switch init in failsafe-mode on some MT7621 boards   Daniel Golle
• [OpenWrt-Devel] Fwd: [Battlemesh] Battlemesh v9 announcement   Simon Wunderlich
• [OpenWrt-Devel] [PATCH] ramips: enable work-arounds to fix sdhci on mt7621   Daniel Golle
• [OpenWrt-Devel] [PATCH] [packages] linuxptp: Add package   Wojciech Dubowik
  • [OpenWrt-Devel] [PATCH] [packages] linuxptp: Add package   John Crispin
    • [OpenWrt-Devel] [PATCH] [packages] linuxptp: Add package   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] [packages] linuxptp: Add package   John Crispin
      • [OpenWrt-Devel] [PATCH] [packages] linuxptp: Add package   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] [packages] linuxptp: Add package   John Crispin
• [OpenWrt-Devel] [PATCH] mpc85xx: Add PTP node for TL-WD4900 in device tree   Wojciech Dubowik
• [OpenWrt-Devel] [PATCH v2] [packages]: linuxptp: Add package   Wojciech Dubowik
  • [OpenWrt-Devel] [PATCH v2] [packages]: linuxptp: Add package   John Crispin
• [OpenWrt-Devel] [PATCH v3] [packages] linuxptp: Add package   Wojciech Dubowik
• [OpenWrt-Devel] [PATCH] mac80211: add 'channel_list' option for channel list restriction   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] mac80211: add 'channel_list' option for channel list restriction   Leonardo Brondani Schenkel
• [OpenWrt-Devel] [PATCH v4] [packages]: linuxptp: Add package   Wojciech Dubowik
• [OpenWrt-Devel] Can drop LXC tar.gz patch from patchwork   Daniel Dickinson
  • [OpenWrt-Devel] Can drop LXC tar.gz patch from patchwork   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: add support for Netgear WPN824N   Hartmut Knaack
  • [OpenWrt-Devel] [PATCH resend] ar71xx: add support for Netgear WPN824N   Hartmut Knaack
• [OpenWrt-Devel] Patchwork registration issues   Daniel Dickinson
• [OpenWrt-Devel] [CC 15.05] php: Security update (6 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH] dnsmasq: Add option --min-port   Hans Dedecker
• [OpenWrt-Devel] [OpenWrt-Security-Announce] [CC 15.05] php: Security update (6 CVEs)   Brian Smith
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: fix AR8337 switch initialization on dLAN pro 1200+ WiFi ac   Günther Kelleter
  • [OpenWrt-Devel] [PATCH 2/2] ar71xx: board.d: fix switch defaults on dLAN pro 1200+ WiFi ac   Günther Kelleter
• [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Roman Yeryomin
    • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Arnd Gronenberg
    • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Roman Yeryomin
  • [OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] kernel: add missing kmod-video-videobuf2's object file in 4.4   Jan Čermák
  • [OpenWrt-Devel] [PATCH] kernel: add missing kmod-video-videobuf2's object file in 4.4   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] kernel: add missing kmod-video-videobuf2's object file in 4.4   Jan Čermák
• [OpenWrt-Devel] [PATCH 0/2] ARC770 updates   Alexey Brodkin
  • [OpenWrt-Devel] [PATCH 1/2] arc770: bump linux kernel from 4.3 to 4.4   Alexey Brodkin
  • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Alexey Brodkin
    • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Alexey Brodkin
      • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 2/2] arc770: move arc patches to taregt/linux/generic   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/2] update imx6 kernel to 4.4   Pushpal Sidhu
  • [OpenWrt-Devel] [PATCH 1/2] imx6: add 4.4 support   Pushpal Sidhu
  • [OpenWrt-Devel] [PATCH 2/2] imx6: move to 4.4 kernel   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] Enable ATIIXP on x64   Lucian Cristian
  • [OpenWrt-Devel] [PATCH] Enable ATIIXP on x64   Felix Kaechele
    • [OpenWrt-Devel] [PATCH] Enable ATIIXP on x64   Lucian Cristian
• [OpenWrt-Devel] [PATCH] dropbear: use Openwrt default PATH also in dropbear   Hannu Nyman
• [OpenWrt-Devel] [PATCH] [package] Allow UCI dhcp classifier to accept a MAC list   John A Brown
• [OpenWrt-Devel] [PATCH] brcm2708: add linux 4.4 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] lantiq: replace the target specific mtdsplit parsers   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 1/4] kernel: mtdsplit: add support for brnImages   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 2/4] kernel: mtdsplit: add support for EVA images   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 3/4] kernel: mtdsplit_squashfs: Align with the erase-block size   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 4/4] lantiq: Switch to the generic mtdsplit parser implementations   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] x64 - crypto-rng drbg.ko missing   Lucian Cristian
• [OpenWrt-Devel] Freifunk & GSoC 2016 - Participation and Ideas List   Andreas Bräu
• [OpenWrt-Devel] [PATCH] lantiq: Fixed brnImage signature for the VGV7510KW22BRN images   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH] lantiq: Fixed brnImage signature for the VGV7510KW22BRN images   Christoph Kottke
• [OpenWrt-Devel] Patch Fix Ethernet RB591G-2HnD RB951G-2HnD   Bruno D'Ambrosio
  • [OpenWrt-Devel] Patch Fix Ethernet RB591G-2HnD RB951G-2HnD   Bruno D'Ambrosio
  • [OpenWrt-Devel] Patch Fix Ethernet RB591G-2HnD RB951G-2HnD   Bruno D'Ambrosio
• [OpenWrt-Devel] Patch Fix Ethernet RB951G-2HnD   Bruno D'Ambrosio
• [OpenWrt-Devel] [PATCH 0/5] update at91 kernel to 4.1   Ben Whitten
  • [OpenWrt-Devel] [PATCH 1/5] at91: add 4.1 support   Ben Whitten
  • [OpenWrt-Devel] [PATCH 2/5] at91: add package for high speed usb device   Ben Whitten
  • [OpenWrt-Devel] [PATCH 3/5] at91: remove SAMA5D3 from Default image build.   Ben Whitten
  • [OpenWrt-Devel] [PATCH 4/5] at91: move to 4.1 kernel   Ben Whitten
  • [OpenWrt-Devel] [PATCH 5/5] at91: fix typo in usb kernel module makefile   Ben Whitten
  • [OpenWrt-Devel] [PATCH 0/5] update at91 kernel to 4.1   Felix Fietkau
    • [OpenWrt-Devel] [PATCH 0/5] update at91 kernel to 4.1   Ben Whitten
  • [OpenWrt-Devel] [PATCH 0/5] update at91 kernel to 4.1   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] Fix sysupgrade overlay saving   Rob Mosher
• [OpenWrt-Devel] [PATCH] [build] Support LibreSSL as provider of openssl   Marek Behun
  • [OpenWrt-Devel] [PATCH] [build] Support LibreSSL as provider of openssl   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] [build] Support LibreSSL as provider of openssl   Marek Behún
• [OpenWrt-Devel] [PATCH][RFC] x86: Save and restore partition table during upgrade   Rob Mosher
  • [OpenWrt-Devel] [PATCH][RFC] x86: Save and restore partition table during upgrade   Luiz Angelo Daros de Luca
    • [OpenWrt-Devel] [PATCH][RFC] x86: Save and restore partition table during upgrade   Rob Mosher
  • [OpenWrt-Devel] [PATCH][RFC] x86: Save and restore partition table during upgrade   Jo-Philipp Wich
• [OpenWrt-Devel] lantiq: SPI cleanups and update to the new SPI driver   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 01/13] lantiq: Backport upstream pinctrl-xway patches from 4.5   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 02/13] lantiq: Use the new pinctrl compatible strings   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 03/13] lantiq: Configure the PCIe reset GPIO using OF   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 04/13] lantiq: Add the SPI node to ar9.dtsi and vr9.dtsi   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 05/13] lantiq: Re-use the SPI node from vr9.dtsi in TDW89X0.dtsi   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 06/13] lantiq: Switch FRITZ3370 from spi-gpio to the hardware SPI driver   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 07/13] lantiq: Enable SPI for the EASY80920 board again   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 08/13] lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500B   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 09/13] lantiq: Disable CONFIG_SPI_GPIO   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 10/13] lantiq: Add a rewritten version of the SPI driver   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 11/13] lantiq: Switch to the new SPI driver   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 12/13] lantiq: Remove the old SPI driver patch   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 13/13] lantiq: Remove incorrect PCIe compatible strings   Martin Blumenstingl
• [OpenWrt-Devel] [CC 15.05] openssh: Security update (2 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH] iproute2: remove odd conffiles generation   Rob Mosher
• [OpenWrt-Devel] [PATCH][package] Allow UCI dhcp classifier to accept a list of MAC   nworbnhoj
  • [OpenWrt-Devel] [PATCH][package] Allow UCI dhcp classifier to accept a list of MAC   Jo-Philipp Wich
  • [OpenWrt-Devel] [PATCH][package] Allow UCI dhcp classifier to accept a list of MAC   nworbnhoj
• [OpenWrt-Devel] Unintended consequence of building all profiles for a target   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 0/5] update at91 kernel to 4.4   Ben Whitten
  • [OpenWrt-Devel] [PATCH 1/5] at91: add 4.4 support   Ben Whitten
  • [OpenWrt-Devel] [PATCH 2/5] at91: add package for high speed usb device   Ben Whitten
  • [OpenWrt-Devel] [PATCH 3/5] at91: remove SAMA5D3 from Default image build.   Ben Whitten
  • [OpenWrt-Devel] [PATCH 4/5] at91: fix typo in usb kernel module makefile   Ben Whitten
  • [OpenWrt-Devel] [PATCH 5/5] at91: move to 4.4 kernel   Ben Whitten
• [OpenWrt-Devel] ping: patchwork registration/access issue   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 1/1] package/libs/libiconv: function names   Heinrich Schuchardt
  • [OpenWrt-Devel] [PATCH 1/1] package/libs/libiconv: function names   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH] ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04)   John Clark
  • [OpenWrt-Devel] [PATCH] ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04)   John Clark
  • [OpenWrt-Devel] [PATCH] ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04)   John Clark
    • [OpenWrt-Devel] [PATCH] ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04)   John Crispin
• [OpenWrt-Devel] [PATCHv2 1/2] lantiq: Add support for linux 4.4   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCHv2 2/2] lantiq: ltq-deu: Remove the "DEU test manager"   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] brcm63xx: Let the CFE partition in HG556a to be writeable   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: fix gpio ephy-reset   Jonas Gorski
  • [OpenWrt-Devel] [PATCH] brcm63xx: fix gpio ephy-reset   dani
• [OpenWrt-Devel] [PATCH] brcm63xx: add support for Huawei HG622   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: add support for ZyXEL P870HNU-51b   Jonas Gorski
• [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   Jason Wu
  • [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   Felix Fietkau
    • [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   Jason Wu
      • [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   Felix Fietkau
      • [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   John Crispin
      • [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   Felix Fietkau
      • [OpenWrt-Devel] [RFC v2] [zynq] Add new target zynq   Jason Wu
• [OpenWrt-Devel] Dissociate STA based on SNR   Nishant Sharma
  • [OpenWrt-Devel] Dissociate STA based on SNR   Bastian Bittorf
    • [OpenWrt-Devel] Dissociate STA based on SNR   Nishant Sharma
      • [OpenWrt-Devel] Dissociate STA based on SNR   Bastian Bittorf
  • [OpenWrt-Devel] Dissociate STA based on SNR   Weedy
    • [OpenWrt-Devel] Dissociate STA based on SNR   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] arc770/axs101: fix console output   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] arc: clean-up and move CFLAGS to include/target.mk   Alexey Brodkin
• [OpenWrt-Devel] [PATCH 0/2 v2] linux: add support of ARC HS38-based boards   Alexey Brodkin
  • [OpenWrt-Devel] [PATCH 1/2 v2] toolchain: add support of ARCv2 architecture   Alexey Brodkin
  • [OpenWrt-Devel] [PATCH 2/2 v2] linux: add support of Synopsys ARCHS38-based boards   Alexey Brodkin
  • [OpenWrt-Devel] [PATCH 0/2 v2] linux: add support of ARC HS38-based boards   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] HiLink HLK-RM04 image name typo (RM02 -> RM04)   John Clark
  • [OpenWrt-Devel] [PATCH] HiLink HLK-RM04 image name typo (RM02 -> RM04)   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/2] kernel/modules: add missing symbol for crypto-rng   Stijn Tintel
  • [OpenWrt-Devel] [PATCH 2/2] kernel: add missing symbols for 4.1   Stijn Tintel
• [OpenWrt-Devel] [PATCH 1/4] oxnas: fix the incorrect board names   Shonn Lu
  • [OpenWrt-Devel] [PATCH 1/4] oxnas: fix the incorrect board names   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/4] oxnas: prepare platform and drivers for Linux 4.4   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/4] oxnas: add patches and config for Linux 4.4   Daniel Golle
• [OpenWrt-Devel] [PATCH 4/4] oxnas: switch to Linux 4.4   Daniel Golle
• [OpenWrt-Devel] [PATCH for netifd] wireless: rename 'wpa_pairwise' variable to 'wpa_cipher'   Daniel Golle
• [OpenWrt-Devel] [PATCH] uhttpd: add option for mbedtls   Daniel Golle
• [OpenWrt-Devel] [PATCH] hostap/wpa_supplicant: enable EAP-FAST in -full builds   Daniel Golle
• [OpenWrt-Devel] [PATCH] wpa_supplicant: add support for EAP-TLS phase2   Daniel Golle
• [OpenWrt-Devel] [PATCH] wpa_supplicant: enforce cipher in client mode and cosmetics   Daniel Golle
• [OpenWrt-Devel] John, no permission to change patches even own   Daniel Dickinson
  • [OpenWrt-Devel] John, no permission to change patches even own   Etienne Champetier
    • [OpenWrt-Devel] John, no permission to change patches even own   Daniel Dickinson
• [OpenWrt-Devel] [PATCH 00/13] Allow to build subset of profiles for target   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 01/13] build metadata: Allow to build a subset of profiles in a single build   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 01/13] build metadata: Allow to build a subset of profiles in a single build   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 01/13] build metadata: Allow to build a subset of profiles in a single build   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH 01/13] build metadata: Allow to build a subset of profiles in a single build   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 02/13] ar71xx: Allow to select a subset of profiles for building   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 03/13] at91: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 04/13] mvebu: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 05/13] ramips: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 06/13] mpc85xx: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 07/13] arc770: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 08/13] brcm63xx: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 09/13] sunxi: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 10/13] kirkwood: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 11/13] adm5120: Translate existing all profiles profiles to new mult-select structure   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 12/13] lantiq: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 13/13] brcm47xx: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] Fixed [PATCH 0/13] Allow to build a subset of profiles for target   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 01/13] build metadata: Allow to build a subset of profiles in a single build   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 02/13] ar71xx: Allow to select a subset of profiles for building   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 03/13] at91: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 04/13] mvebu: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 05/13] ramips: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 06/13] mpc85xx: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 07/13] arc770: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 08/13] brcm63xx: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 09/13] sunxi: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 10/13] kirkwood: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 11/13] adm5120: Translate existing all profiles profiles to new mult-select structure   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 12/13] lantiq: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 13/13] brcm47xx: Add an 'All Profiles' profile   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 1/3] kernel: add missing symbol for 4.4   Stijn Tintel
  • [OpenWrt-Devel] [PATCH 2/3] kernel/modules: add kmod-crypto-hw-ccp   Stijn Tintel
  • [OpenWrt-Devel] [PATCH 3/3] kernel: add patch to fix the ccp-crypto module   Stijn Tintel
• [OpenWrt-Devel] Brauche Hilfe   smilebef at gmail.com
• [OpenWrt-Devel] [PATCH] oxnas: finally make board names consistent   Daniel Golle
• [OpenWrt-Devel] [PATCH v4 0/3] Add DRM video output support for IMX6   Tim Harvey
  • [OpenWrt-Devel] [PATCH 1/3] kernel: add backlight kernel module support   Tim Harvey
    • [OpenWrt-Devel] [PATCH 1/3] kernel: add backlight kernel module support   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 2/3] kernel: video: add fbcon support   Tim Harvey
  • [OpenWrt-Devel] [PATCH 3/3] kernel: video: add DRM core and IMX DRM support for HDMI/LVDS   Tim Harvey
• [OpenWrt-Devel] [PATCH] [CC] ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04)   John Clark
• [OpenWrt-Devel] [PATCH] ramips: Add support for Netgear EX2700   Joseph C. Lehner
  • [OpenWrt-Devel] [PATCH] ramips: Add support for Netgear EX2700   John Crispin
    • [OpenWrt-Devel] [PATCH v3] ramips: Add support for Netgear EX2700   Joseph C. Lehner
  • [OpenWrt-Devel] [PATCH v2] ramips: Add support for Netgear EX2700   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH] lantiq: Enable the uImage mtd splitter   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] qos-scripts: Fix classification of ingress traffic   Michael Marley
• [OpenWrt-Devel] [PATCH] lantiq: Fix enabling CONFIG_MTD_UIMAGE_SPLIT   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] qos-scripts: Allow classification by the traffic's source interface   Michael Marley
• [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Michael Marley
  • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Michael Marley
    • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Michael Marley
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Weedy
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Weedy
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Michael Marley
      • [OpenWrt-Devel] [PATCH] qos-scripts: Add IPv6 support   Weedy
• [OpenWrt-Devel] [PATCH] build: mkits.sh: Add ramdsik support   Jason Wu
• [OpenWrt-Devel] [PATCH] [CC] ramips: Setup missing gpio exports and fine-tune the memory model number.   John Clark
• [OpenWrt-Devel] [PATCH] ramips: Setup missing gpio exports and fine-tune the memory model number.   John Clark
  • [OpenWrt-Devel] [PATCH] ramips: Setup missing gpio exports and fine-tune the memory model number.   John Crispin
    • [OpenWrt-Devel] [PATCH] ramips: Setup missing gpio exports and fine-tune the memory model number.   John Clark
      • [OpenWrt-Devel] [PATCH] ramips: Setup missing gpio exports and fine-tune the memory model number.   John Crispin
• [OpenWrt-Devel] [PATCH] elfutils: bump to 0.165   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] package/config/netifd: Replace ifconfig/route with ip command   Daniel Dickinson
• [OpenWrt-Devel] Monitoring Transmission Buffer Queue Length   Nimantha Baranasuriya
• [OpenWrt-Devel] [PATCH] [v3] ar71xx: Support for Ubiquiti UniFi AP AC LITE   p.wassi at gmx.at
• [OpenWrt-Devel] [PATCH v2] base-files: For sysfixtime use hwclock if RTC available   Petr Štetiar
  • [OpenWrt-Devel] [PATCH v2] base-files: For sysfixtime use hwclock if RTC available   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   Petr Štetiar
      • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   John Crispin
      • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   Petr Štetiar
      • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   John Crispin
      • [OpenWrt-Devel] [PATCH v4] base-files: For sysfixtime use hwclock if RTC available   Petr Štetiar
      • [OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available   Bastian Bittorf
• [OpenWrt-Devel] RFC: dropping oprofile   Felix Fietkau
  • [OpenWrt-Devel] RFC: dropping oprofile   Kevin Darbyshire-Bryant
    • [OpenWrt-Devel] RFC: dropping oprofile   Kevin Darbyshire-Bryant
      • [OpenWrt-Devel] RFC: dropping oprofile   Felix Fietkau
      • [OpenWrt-Devel] RFC: dropping oprofile   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   amine ahd
  • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Amine Aouled Hamed
      • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Amine Aouled Hamed
      • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Amine Aouled Hamed
      • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Amine Aouled Hamed
      • [OpenWrt-Devel] [PATCH] busybox: sysntpd - use NTP servers received via DHCP   Amine Aouled Hamed
  • [OpenWrt-Devel] [PATCH] busybox: ntpd - Add support for NTP servers received from DHCP   amine ahd
    • [OpenWrt-Devel] [PATCH] busybox: ntpd - Add support for NTP servers received from DHCP   Amine Aouled Hamed
• [OpenWrt-Devel] [PATCH 1/3] network/services/dnsmasq: Add support for multiple instances of dnsmasq   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 2/3] network/services/dnsmasq: Use user:group dnsmasq:dnsmasq for dnsmasq   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 3/3] network/services/dnsmasq: Set the default dhcp lease file and resolv file   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH v5 0/3] Add DRM video output support for IMX6   Tim Harvey
  • [OpenWrt-Devel] [PATCH v5 1/3] kernel: add backlight kernel module support   Tim Harvey
  • [OpenWrt-Devel] [PATCH v5 2/3] kernel: video: add fbcon support   Tim Harvey
  • [OpenWrt-Devel] [PATCH v5 3/3] kernel: video: add DRM core and IMX DRM support for HDMI/LVDS   Tim Harvey
• [OpenWrt-Devel] [PATCH] Ubnt EdgeRouter: Use mmcblk0p3 as ext4 rootfs for default ?   daniel
  • [OpenWrt-Devel] [PATCH] Ubnt EdgeRouter: Use mmcblk0p3 as ext4 rootfs for default ?   John Crispin
    • [OpenWrt-Devel] [PATCH] Ubnt EdgeRouter: Use mmcblk0p3 as ext4 rootfs for default ?   daniel
• [OpenWrt-Devel] [PATCH 1/8] build metadata: Allow to build a subset of profiles in a single build   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 2/8] ar71xx: Enable mult-profile select   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 3/8] at91: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 4/8] ramips: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 5/8] mvebu: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 6/8] adm5120: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 7/8] brcm63xx: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 8/8] kirkwood: Translate the build all profiles profile to new multi-profile config   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] package/network/config/qos-scripts: Drop ifconfig and use ip command instead   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] network/services/dnsmasq: Use user:group dnsmasq:dnsmasq for dnsmasq   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] target/imagebuilder: Add ability to override image generation options   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH 1/3] package/network/utils/iproute: ip-full/busybox provides ip   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 2/3] packaget/network/services/openvpn: Drop ifconfig/route in favour of ip   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 2/3] packaget/network/services/openvpn: Drop ifconfig/route in favour of ip   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 2/3] packaget/network/services/openvpn: Drop ifconfig/route in favour of ip   Daniel Dickinson
  • [OpenWrt-Devel] [PATCH 3/3] package/network/config/qos-scripts: Drop ifconfig and use ip command instead   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 3/3] package/network/config/qos-scripts: Drop ifconfig and use ip command instead   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 3/3] package/network/config/qos-scripts: Drop ifconfig and use ip command instead   Daniel Dickinson
      • [OpenWrt-Devel] [PATCH 3/3] package/network/config/qos-scripts: Drop ifconfig and use ip command instead   Bastian Bittorf
      • [OpenWrt-Devel] [PATCH 3/3] package/network/config/qos-scripts: Drop ifconfig and use ip command instead   Daniel Dickinson
  • [OpenWrt-Devel] [PATCH 1/3] package/network/utils/iproute: ip-full/busybox provides ip   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v6 0/3] Add DRM video output support for IMX6   Tim Harvey
  • [OpenWrt-Devel] [PATCH v6 1/3] kernel: add backlight kernel module support   Tim Harvey
  • [OpenWrt-Devel] [PATCH v6 2/3] kernel: video: add fbcon support   Tim Harvey
  • [OpenWrt-Devel] [PATCH v6 3/3] kernel: video: add DRM core and IMX DRM support for HDMI/LVDS   Tim Harvey
• [OpenWrt-Devel] [PATCH 1/6] [kernel] ath9k: enable GPIO access for ar9287 and ar9285   Michal Cieslakiewicz
  • [OpenWrt-Devel] [PATCH 1/6] [kernel] ath9k: enable GPIO access for ar9287 and ar9285   Hartmut Knaack
    • [OpenWrt-Devel] [PATCH 1/6] [kernel] ath9k: enable GPIO access for ar9287 and ar9285   Michal
      • [OpenWrt-Devel] [PATCH 1/8] ath9k: enable platform WLAN LED name   Michal
      • [OpenWrt-Devel] [PATCH 1/8] ath9k: enable platform WLAN LED name   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 1/8] ath9k: enable platform WLAN LED name   Michal
      • [OpenWrt-Devel] [PATCH 1/8] ath9k: enable platform WLAN LED name   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 2/8] ath9k: set default state for platform LEDs   Michal
      • [OpenWrt-Devel] [PATCH 2/8] ath9k: set default state for platform LEDs   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 3/8] ath9k: show platform MAC address in kernel log if set   Michal
      • [OpenWrt-Devel] [PATCH 3/8] ath9k: show platform MAC address in kernel log if set   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 4/8] ath9k: enable access to GPIO   Michal
      • [OpenWrt-Devel] [PATCHv2 4/8] ath9k: enable access to GPIO   Michal
      • [OpenWrt-Devel] [PATCHv2 4/8] ath9k: enable access to GPIO   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 5/8] ath9k: enable GPIO buttons   Michal
      • [OpenWrt-Devel] [PATCHv2 5/8] ath9k: enable GPIO buttons   Michal
      • [OpenWrt-Devel] [PATCHv3 5/8] ath9k: enable GPIO buttons   Michal
      • [OpenWrt-Devel] [PATCHv3 5/8] ath9k: enable GPIO buttons   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 6/8] package: exclude USB modules from WNR2000v3 image   Michal
      • [OpenWrt-Devel] [PATCH 6/8] package: exclude USB modules from WNR2000v3 image   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 7/8] ath79: fix for random WLAN MAC for WNR2000v3   Michal
      • [OpenWrt-Devel] [PATCH 7/8] ath79: fix for random WLAN MAC for WNR2000v3   Hartmut Knaack
      • [OpenWrt-Devel] [PATCH 8/8] ath79: all LEDs and buttons for Netgear WNR2000v3   Michal
      • [OpenWrt-Devel] [PATCH 8/8] ath79: all LEDs and buttons for Netgear WNR2000v3   Hartmut Knaack
• [OpenWrt-Devel] [PATCH 2/6] [kernel] ath9k: be verbose if platform-supplied hardware MAC is used   Michal Cieslakiewicz
• [OpenWrt-Devel] [PATCH 3/6] [kernel] ath79: new functions for passing GPIO data to wireless module   Michal Cieslakiewicz
• [OpenWrt-Devel] [PATCH 4/6] [kernel] ath79: all LEDs and buttons for Netgear WNR2000v3   Michal Cieslakiewicz
• [OpenWrt-Devel] [PATCH 5/6] [kernel] ath79: fix random wireless MAC address for WNR2000v3   Michal Cieslakiewicz
• [OpenWrt-Devel] [PATCH 6/6] [package] exclude USB modules from WNR2000v3 image   Michal Cieslakiewicz
• [OpenWrt-Devel] [OpenWrt] #20201: TL-wdr4900 max txpower for country BG (Bulgaria)   Atanas Vladimirov
• [OpenWrt-Devel] [PATCH] build: download.mk: bugfix download.pl argument call order   Florian Eckert
  • [OpenWrt-Devel] [PATCH] build: download.mk: bugfix download.pl argument call order   John Crispin
• [OpenWrt-Devel] [PATCH v2] build: download.mk: bugfix download.pl argument call order   Florian Eckert
• [OpenWrt-Devel] [PATCH] [RFC] libubus.h: add ubus_connected function   Ben Kelly
• [OpenWrt-Devel] Kernel 4.3, MT7688 does not boot   Baptiste Clenet
• [OpenWrt-Devel] OpenWrt cfg80211.h station_info incompatibility with kernel+mac80211 [was: B.A.T.M.A.N. V leaves the nest v2]   Sven Eckelmann
  • [OpenWrt-Devel] OpenWrt cfg80211.h station_info incompatibility with kernel+mac80211 [was: B.A.T.M.A.N. V leaves the nest v2]   Felix Fietkau
    • [OpenWrt-Devel] OpenWrt cfg80211.h station_info incompatibility with kernel+mac80211 [was: B.A.T.M.A.N. V leaves the nest v2]   Sven Eckelmann
      • [OpenWrt-Devel] OpenWrt cfg80211.h station_info incompatibility with kernel+mac80211 [was: B.A.T.M.A.N. V leaves the nest v2]   Felix Fietkau
      • [OpenWrt-Devel] OpenWrt cfg80211.h station_info incompatibility with kernel+mac80211 [was: B.A.T.M.A.N. V leaves the nest v2]   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/2] swconfig: implement (PHY) generic PORT_LINK setter   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 2/2] b53: provide PHY access to swconfig   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 1/2] swconfig: implement (PHY) generic PORT_LINK setter   Jonas Gorski
• [OpenWrt-Devel] mpc85xx: Kernel crash with binutils 2.25.1   Wojciech Dubowik
  • [OpenWrt-Devel] mpc85xx: Kernel crash with binutils 2.25.1   Felix Fietkau
• [OpenWrt-Devel] [PATCH] netifd: Route traffic from LAN to WAN using rules   Kristian Evensen
• [OpenWrt-Devel] Patch: Support for TP-Link WR-802N   Rick Pannen
• [OpenWrt-Devel] [PATCH 0/5] Smooth install/uninstall of full version alongside busybox   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 1/5] include/package: Add generic macro for replacing BusyBox applets   openwrt at daniel.thecshore.com
    • [OpenWrt-Devel] [PATCH 1/5] include/package: Add generic macro for replacing BusyBox applets   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 2/5] package/utils/bzip2: Allow install/uninstall alongside busybox   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 3/5] package/utils/util-linux: Allow smooth install/uninstall alongside busybox   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 4/5] package/network/utils/iproute: Allow smooth install/uninstall alongside busybox   openwrt at daniel.thecshore.com
  • [OpenWrt-Devel] [PATCH 5/5] package/network/utils/iputils: Allow smooth install/uninstall alongside busybox   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] x86: preserve partition table on sysupgrade   Rob Mosher
• [OpenWrt-Devel] netifd question   Daniel Dickinson
  • [OpenWrt-Devel] netifd question   Bastian Bittorf
• [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   John Clark
  • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Bastian Bittorf
    • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   John Clark
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Weedy
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   edgar.soldin at web.de
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   edgar.soldin at web.de
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   edgar.soldin at web.de
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] sysupgrade problems with uclient-fetch based wget   John Clark
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Martin Tippmann
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Bastian Bittorf
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Martin Tippmann
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Bastian Bittorf
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] uclient-fetch & SSL WAS:Re: DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   John Clark
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   John Clark
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   John Clark
  • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Bastian Bittorf
    • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   John Clark
  • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Christian Schoenebeck
    • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Christian Schoenebeck
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Christian Schoenebeck
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Christian Schoenebeck
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Christian Schoenebeck
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Felix Fietkau
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Arjen de Korte
      • [OpenWrt-Devel] DD: CONFIG_BUSYBOX_DEFAULT_WGET is not set   Daniel Dickinson
• [OpenWrt-Devel] [PATCH] x86_64: Add missing symbols   openwrt at daniel.thecshore.com
• [OpenWrt-Devel] [PATCH] base-files: fix sysupgrade 'wget' handling   Bastian Bittorf
• [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Nishant Sharma
  • [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Felix Fietkau
    • [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Nishant Sharma
    • [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Nishant Sharma
      • [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Lars
      • [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Felix Fietkau
      • [OpenWrt-Devel] /usr/bin/ip missing in 15.05.1   Nishant Sharma
• [OpenWrt-Devel] LuCI FileUpload in network section   Jakub Jančo
• [OpenWrt-Devel] [OpenWrt-Commits] r48276 - trunk/target/linux/ar71xx/image   Arjen de Korte
  • [OpenWrt-Devel] [OpenWrt-Commits] r48276 - trunk/target/linux/ar71xx/image   Felix Fietkau
• [OpenWrt-Devel] [PATCH 1/4] ramips: HLK-RM04 - Remove power LED config   John Clark
  • [OpenWrt-Devel] [PATCH 2/4] ramips: HLK-RM04 - Fix push button functions   John Clark
  • [OpenWrt-Devel] [PATCH 3/4] rampis: HLK-RM04 - Setup I2C as GPIO   John Clark
  • [OpenWrt-Devel] [PATCH 4/4] ramips: HLK-RM04 - Enable GPIO14 for WPS button   John Clark
    • [OpenWrt-Devel] [PATCH 4/4] ramips: HLK-RM04 - Enable GPIO14 for WPS button   John Clark
      • [OpenWrt-Devel] [PATCH 4/4] ramips: HLK-RM04 - Enable GPIO14 for WPS button   Piotr Dymacz
    • [OpenWrt-Devel] [PATCH 4/4] ramips: HLK-RM04 - Enable GPIO14 for WPS button   John Clark
• [OpenWrt-Devel] [PATCH] lantiq: Move the definition of the xrx200-net node to vr9.dtsi   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] base-files: fix sysupgrade 'wget' handling for uclient-fetch   John Clark
• [OpenWrt-Devel] [PATCH 1/1] uhttpd.init: generate 2048 bit RSA key   Heinrich Schuchardt
  • [OpenWrt-Devel] [PATCH 1/1 v2] package/uhttpd: generate 2048 bit RSA key   Heinrich Schuchardt
• [OpenWrt-Devel] Bug Report: zram corrupts memory / misbehaves on ar71xx   Martin Tippmann
• [OpenWrt-Devel] [PATCH] lantiq: Make the ar9.dtsi sram node match "simple-bus"   Martin Blumenstingl
• [OpenWrt-Devel] Discussion: Replace BUSYBOX NSLOOKUP by hostip package   Christian Schoenebeck
  • [OpenWrt-Devel] Discussion: Replace BUSYBOX NSLOOKUP by hostip package   Arjen de Korte
    • [OpenWrt-Devel] Discussion: Replace BUSYBOX NSLOOKUP by hostip package   Christian Schoenebeck
  • [OpenWrt-Devel] Discussion: Replace BUSYBOX NSLOOKUP by hostip package   Felix Fietkau
• [OpenWrt-Devel] [CC 15.05] bind: Security update (4 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   André Valentin
  • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   Andre Valentin
  • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   Andre Valentin
    • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   Andre Valentin
  • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   André Valentin
      • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] vlandev: Add support for setting a unique MAC on a VLAN interface   Andre Valentin
• [OpenWrt-Devel] [PATCH] kernel: mtdsplit: add missing digest field to Seama header   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] kernel: wpan: mrf24j40 depends on regmap-spi   Daniel Golle
  • [OpenWrt-Devel] [PATCH] kernel: wpan: mrf24j40 depends on regmap-spi   Felix Fietkau
    • [OpenWrt-Devel] [PATCH v2] kernel: wpan: mrf24j40 depends on regmap-spi   Daniel Golle
• [OpenWrt-Devel] [PATCH] dnsmasq: Don't add local hostname if ula prefix is not specified   Hans Dedecker
• [OpenWrt-Devel] BGP-LS support in OPENWRT   Iben Rodriguez
  • [OpenWrt-Devel] BGP-LS support in OPENWRT   Juliusz Chroboczek
• [OpenWrt-Devel] [PATCH 00/13] improve reproducible builds   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 01/13] Makefile: set timezone to UTC   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 02/13] busybox: disable timestamp in version   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 03/13] include/kernel: sort module lists for reproducibility   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 04/13] include/kernel: add custom USER/DOMAIN config options   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 05/13] include/image: introduce SOURCE_DATE_EPOCH variable in image context   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 06/13] tools/mkimage: backport SOURCE_DATE_EPOCH for reproducible builds   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 07/13] include/kernel: set build timestamp to SOURCE_DATE_EPOCH if available   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 08/13] package/Makefile: override opkg installation time when SOURCE_DATE_EPOCH set   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 09/13] build system: have tar use $SOURCE_DATE_EPOCH for --mtime   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 10/13] include/image: don't save gzip name/timestamp metadata   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 11/13] include/image: use SOURCE_DATE_EPOCH if set for squashfs + ext4 images   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 12/13] ar71xx/image: use SOURCE_DATE_EPOCH for mksquashfs-lzma   Alexander Couzens
  • [OpenWrt-Devel] [PATCH 13/13] Makefile: fix --mtime usage with SOURCE_DATE_EPOCH fixup   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2] brcm63xx: add support for ZyXEL P870HNU-51b   Mohammed Berdai
• [OpenWrt-Devel] [PATCH] malta: move to 4.4 kernel   Yousong Zhou
• [OpenWrt-Devel] [PATCH] brcm63xx: fix HG556a C button   dani
• [OpenWrt-Devel] ramips: Error in mt7620_gsw_probe/mt7621_gsw_probe?   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH 1/3] swconfig: add (PHY) generic helper setting port link   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 2/3] b53: provide PHY access to swconfig   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 3/3] b53: support setting port link   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] iproute2: ip_tiny.patch: Don't filter CAN support   Pushpal Sidhu
  • [OpenWrt-Devel] [PATCH] iproute2: ip_tiny.patch: Don't filter CAN support   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH] iproute2: ip_tiny.patch: Don't filter CAN support   Pushpal Sidhu
      • [OpenWrt-Devel] [PATCH] iproute2: ip_tiny.patch: Don't filter CAN support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] iproute2: ip_tiny.patch: Don't filter CAN support   Pushpal Sidhu
      • [OpenWrt-Devel] [PATCH] iproute2: ip_tiny.patch: Don't filter CAN support   Felix Fietkau
• [OpenWrt-Devel] [PATCH] kernel: add dsa driver support   Pushpal Sidhu
• [OpenWrt-Devel] [PATCH] kernel: gpio-button-hotplug: update to use threaded irq's   Pushpal Sidhu
• [OpenWrt-Devel] Add several kernel modules   Pushpal Sidhu
  • [OpenWrt-Devel] [PATCH 1/2] kernel: add mma8451 module   Pushpal Sidhu
  • [OpenWrt-Devel] [PATCH 2/2] kernel: other: add PWM controller support   Pushpal Sidhu
    • [OpenWrt-Devel] [PATCH 2/2] kernel: other: add PWM controller support   Pushpal Sidhu
• [OpenWrt-Devel] Question about custom script at init on Trunk.-   Guillermo Javier Nardoni
  • [OpenWrt-Devel] Question about custom script at init on Trunk.-   Eric Schultz
    • [OpenWrt-Devel] Question about custom script at init on Trunk.-   Karl Palsson
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   David Lang
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   Karl Palsson
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   David Lang
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   Karl Palsson
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   Jo-Philipp Wich
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   David Lang
      • [OpenWrt-Devel] Question about custom script at init on Trunk.-   David Lang
  • [OpenWrt-Devel] Question about custom script at init on Trunk.-   David Lang
• [OpenWrt-Devel] [OpenWrt] #8647: rb711 support   Jonas Heinrich
• [OpenWrt-Devel] First boot provisioning   David Lang
• [OpenWrt-Devel] [malta] CC 15.05 backport request -r46269 malta-add-harddisk-support   Vincent Fortier
• [OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix   Anton Kalmykov
  • [OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix   John Crispin
    • [OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix   David Hutchison
  • [OpenWrt-Devel] [PATCH][ar71xx] Routerboard 951G Switch Fix   Anton Kalmykov
• [OpenWrt-Devel] kernel patch editing using QUILT=1   Rick van der Zwet
• [OpenWrt-Devel] Build error for IPQ806X   Tathagata Das
  • [OpenWrt-Devel] Build error for IPQ806X   Tathagata Das
• [OpenWrt-Devel] detecting USB sd card removal ("block info")   Karl Palsson
  • [OpenWrt-Devel] detecting USB sd card removal ("block info")   Daniel Golle
    • [OpenWrt-Devel] detecting USB sd card removal ("block info")   Karl Palsson
• [OpenWrt-Devel] [CC 15.05] php: Security update (7 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05] prosody: Security update (2 CVEs)   jow at openwrt.org
  • [OpenWrt-Devel] [CC 15.05] prosody: Security update (2 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05] php: Security update (CVE-2016-1903)   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05] pcre: Security update (18 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] uhttpd improvement/new feature ?   Sébastien Noel
• [OpenWrt-Devel] memory leak in procd   Kenneth Johansson
  • [OpenWrt-Devel] memory leak in procd   Felix Fietkau
• [OpenWrt-Devel] Monitoring Downlink Queue   Nimantha Baranasuriya
  • [OpenWrt-Devel] Monitoring Downlink Queue   Javier Domingo Cansino
    • [OpenWrt-Devel] Monitoring Downlink Queue   Nimantha Baranasuriya
      • [OpenWrt-Devel] Monitoring Downlink Queue   Michael Richardson
• [OpenWrt-Devel] [CC 15.05] openssl: Security update (2 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] Changeset 48456   Chris Marchesi
  • [OpenWrt-Devel] Changeset 48456   Arjen de Korte
• [OpenWrt-Devel] Opkg automatically enable my service just after I install it?   Zhao Zhang
• [OpenWrt-Devel] Proto add foreign routes on ifup doesnt add route to table   Jakub Jančo
• [OpenWrt-Devel] Procd: Weird behaviour when adding multiple triggers   Amine Aouled Hamed
  • [OpenWrt-Devel] Procd: Weird behaviour when adding multiple triggers   Amine Aouled Hamed
• [OpenWrt-Devel] [PATCH] tools/cmake: update to 3.4.3   Hannu Nyman
• [OpenWrt-Devel] [PATCH] tools/gmp: update to 6.1.0   Hannu Nyman
• [OpenWrt-Devel] [PATCH] package/libs/gmp: update libgmp to 6.1.0   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/3] kernel: mtdsplit: modify rootfs helpers to provide partition type   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 2/3] kernel: mtdsplit: detect UBI partition when looking for rootfs   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 3/3] kernel: mtdsplit: support Seama entity with UBI   Rafał Miłecki
• [OpenWrt-Devel] [BB 14.07] openssl: Security update (2 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [PATCH v3] brcm63xx: add support for ZyXEL P870HNU-51b   Mohammed Berdai
• [OpenWrt-Devel] [PATCH] tools/firmware-utils: add trx2umedia tool for Broadcom based boards from U-Media   Michał Osowiecki
• [OpenWrt-Devel] Wireless battlemesh v9 endorsements   cmsv
• [OpenWrt-Devel] [PATCH] Added support for TL-WA801NDv3   Tiziano Bacocco
• [OpenWrt-Devel] [CC 15.05] [PATCH] Backport - malta: add harddisk support   Vincent Fortier
• [OpenWrt-Devel] [CC 15.05] [PATCH] malta: add harddisk support   Vincent Fortier
• [OpenWrt-Devel] [PATCH] iproute2: Update to version 4.4   André Valentin
• [OpenWrt-Devel] [PATCH RFC 1/2] config: add MPLS and LWTunnel support   André Valentin
  • [OpenWrt-Devel] [PATCH RFC 2/2] modules/netsupport: Add MPLS support   André Valentin
    • [OpenWrt-Devel] [PATCH RFC 2/2] modules/netsupport: Add MPLS support   Felix Fietkau
      • [OpenWrt-Devel] [PATCH RFC 2/2] modules/netsupport: Add MPLS support / size   Andre Valentin
      • [OpenWrt-Devel] [PATCH RFC 2/2] modules/netsupport: Add MPLS support / size   Felix Fietkau
  • [OpenWrt-Devel] [PATCH RFC 1/2] config: add MPLS and LWTunnel support   Felix Fietkau
    • [OpenWrt-Devel] [PATCH RFC 1/2] config: add MPLS and LWTunnel support   Andre Valentin
      • [OpenWrt-Devel] [PATCH RFC 1/2] config: add MPLS and LWTunnel support   Andre Valentin
• [OpenWrt-Devel] [PATCH 1/2] linux/crypto: Add echainiv module provided by 4.4 kernels   André Valentin
  • [OpenWrt-Devel] [PATCH 2/2] linux/net: Add dependency for crypto echainiv module on 4.4   André Valentin
  • [OpenWrt-Devel] [PATCH 1/2] linux/crypto: Add echainiv module provided by 4.4 kernels   Andre Valentin
• [OpenWrt-Devel] ar71xx with kernel 4.4 on WZR-HP-AG300H   Andre Valentin
• [OpenWrt-Devel] [PATCH] Add support for Yuncore XD3200 AP   Jeff Wischkaemper
• [OpenWrt-Devel] [PATCH] Patches to fix kernel panic in Yuncore XD3200 initial commit.   Jeff Wischkaemper
• [OpenWrt-Devel] [PATCH] fstools: add reusable function for getting fs type txt   tymon
• [OpenWrt-Devel] loading calibration data from UBI volume   Martin Blumenstingl

Last message date: Sun Jan 31 18:49:58 EST 2016
Archived on: Thu Jun 25 05:56:20 EDT 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...