[OpenWrt-Devel] [PATCH v3] base-files: For sysfixtime use hwclock if RTC available

[Petr Štetiar]

From: Daniel Dickinson <openwrt at daniel.thecshore.com>

On systems that have an RTC prefer it to the file-based time fixup (i.e.
use hwclock when there is a permanent clock instead of the faked up time
logic that is needed when there is not RTC).

We can't rely on hctosys kernel feature either as we're usually using
RTC as kernel modules which are usually being loaded after hctosys was
run, leading in the following error:

  hctosys: unable to open rtc device (rtc0)

Signed-off-by: Daniel Dickinson <openwrt at daniel.thecshore.com>
Signed-off-by: Petr Štetiar <ynezz at true.cz>
---

Changes in v3:
 * uppercased global variables

 package/base-files/files/etc/init.d/sysfixtime |   15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/package/base-files/files/etc/init.d/sysfixtime b/package/base-files/files/etc/init.d/sysfixtime
index 4010e06..83e9ee4 100755
--- a/package/base-files/files/etc/init.d/sysfixtime
+++ b/package/base-files/files/etc/init.d/sysfixtime
@@ -2,10 +2,25 @@
 # Copyright (C) 2013-2014 OpenWrt.org
 
 START=00
+STOP=90
+
+RTC_DEV=/dev/rtc0
+HWCLOCK=/sbin/hwclock
 
 boot() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -s -f $RTC_DEV && exit 0
+
 	local curtime="$(date +%s)"
 	local maxtime="$(find /etc -type f -exec date -r {} +%s \; | sort -nr | head -n1)"
 	[ $curtime -lt $maxtime ] && date -s @$maxtime
 }
 
+start() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && $HWCLOCK -s -f $RTC_DEV
+}
+
+stop() {
+	[ -e "$RTC_DEV" ] && [ -e "$HWCLOCK" ] && \
+		$HWCLOCK -w -f $RTC_DEV && \
+		logger -t sysfixtime "saved '$(date)' to $RTC_DEV"
+}
-- 
1.7.9.5
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel