[OpenWrt-Devel] [PATCH 04/13] lantiq: Add the SPI node to ar9.dtsi and vr9.dtsi

[Martin Blumenstingl]

This allows devices to use SPI without having to re-define (and thus
duplicating) the whole SPI node.
By default SPI is disabled (as before) because only few devices need it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl at googlemail.com>
---
 target/linux/lantiq/dts/ar9.dtsi | 10 ++++++++++
 target/linux/lantiq/dts/vr9.dtsi | 10 ++++++++++
 2 files changed, 20 insertions(+)

diff --git a/target/linux/lantiq/dts/ar9.dtsi b/target/linux/lantiq/dts/ar9.dtsi
index f69a7ae..25b8346 100644
--- a/target/linux/lantiq/dts/ar9.dtsi
+++ b/target/linux/lantiq/dts/ar9.dtsi
@@ -100,6 +100,16 @@
 			status = "disabled";
 		};
 
+		spi: spi at E100800 {
+			compatible = "lantiq,spi-xway";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <22 23 24>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
 		gpio: pinmux at E100B10 {
 			compatible = "lantiq,xrx100-pinctrl";
 			#gpio-cells = <2>;
diff --git a/target/linux/lantiq/dts/vr9.dtsi b/target/linux/lantiq/dts/vr9.dtsi
index 2330bf1..e38541e 100644
--- a/target/linux/lantiq/dts/vr9.dtsi
+++ b/target/linux/lantiq/dts/vr9.dtsi
@@ -112,6 +112,16 @@
 			status = "disabled";
 		};
 
+		spi: spi at E100800 {
+			compatible = "lantiq,spi-xway";
+			reg = <0xE100800 0x100>;
+			interrupt-parent = <&icu0>;
+			interrupts = <22 23 24>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+		};
+
 		gpio: pinmux at E100B10 {
 			compatible = "lantiq,xrx200-pinctrl";
 			#gpio-cells = <2>;
-- 
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel