[OpenWrt-Devel] Procd: Weird behaviour when adding multiple triggers

[Amine Aouled Hamed]

cat /etc/banner:
Bleeding Edge, r48488

On Fri, Jan 29, 2016 at 11:18 AM, Amine Aouled Hamed <amine.ahd at gmail.com>
wrote:

>
> Hi,
> When adding an interface trigger to sysntpd, the trigger won't work when
> another trigger is present(in this case a reload trigger for system).
> below is the service_triggers function I used for sysntpd:
>
> service_triggers()
> {
>     local script=$(readlink "$initscript")
>     local name=$(basename ${script:-$initscript})
>
>     procd_open_trigger
>     procd_add_raw_trigger "interface.*" 2000 /etc/init.d/$name reload
>     procd_close_trigger
>
>     procd_add_reload_trigger "system"
>     procd_add_validation validate_ntp_section
> }
>
> For testing I added a logger msg in start_service and tested by restarting
> the network service or unplugging a cable(once with system reload trigger
> and another without).
>
> Can anyone confirm this behaviour and explain if it is intended?
> Thanks.
>



-- 

Amine Hamed | Software Engineer



Ocedo GmbH | Hirschstrasse 7 | 76133 Karlsruhe | Germany

Email ahamed at ocedo.com


<ahamed at ocedo.com>

REGISTERED OFFICE: KARLSRUHE | DISTRICT COURT: MANNHEIM | REGISTER NUMBER:
HRB 717873
MANAGING DIRECTOR: MARKUS HENNIG|JAN HICHERT
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160129/982d6a75/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel