[OpenWrt-Devel] [PATCH v3] brcm63xx: add support for ZyXEL P870HNU-51b
Mohammed Berdai
mohammed.berdai at gmail.com
Fri Jan 29 11:01:45 EST 2016
This router is a ZyXEL VDSL2 router and its board has :
chip ID: BCM6368B2, MIPS: 400MHz,
Total Flash size: 16384K with 128 sectors
Total Memory: 67108864 bytes (64MB)
Board Id (0-15): 96368MVWG
with a usb port, and wifi Broadcom bcm43222.
This router requires the image to have: --signature "ZyXEL_4004" --image-offset 0x20000 --block-size 0x20000 --pad 8
Signed-off-by: Mohammed Berdai <mohammed.berdai at gmail.com>
---
Change in v3:
adjusted LEDs GPIOs.
This patch is considered the final one unless you ask for any further adjustments. It was tested against many Trunk revisions more than a dozen times.
change in v2:
fixed white space and patch line breakage caused by email client
adjusted partitions layout due to a CRC error that appeared after commit: af7e198eee0260b7883c56d1d5076deb7fd3d609
---
diff --git a/target/linux/brcm63xx/base-files/etc/board.d/02_network b/target/linux/brcm63xx/base-files/etc/board.d/02_network
index f96da08..7df3fdd 100755
--- a/target/linux/brcm63xx/base-files/etc/board.d/02_network
+++ b/target/linux/brcm63xx/base-files/etc/board.d/02_network
@@ -89,6 +89,7 @@ fast2704v2 |\
hg622 |\
hg655b |\
p870hw-51a_v2 |\
+p870hnu-51b |\
r5010un_v2 |\
vr-3025un |\
vr-3025u |\
diff --git a/target/linux/brcm63xx/base-files/etc/diag.sh b/target/linux/brcm63xx/base-files/etc/diag.sh
index b864964..3c65005 100644
--- a/target/linux/brcm63xx/base-files/etc/diag.sh
+++ b/target/linux/brcm63xx/base-files/etc/diag.sh
@@ -102,6 +102,9 @@ set_state() {
p870hw-51a_v2)
status_led="P870HW-51a:green:power"
;;
+ p870hnu-51b)
+ status_led="P870HNU-51b:green:power"
+ ;;
r5010un_v2)
status_led="R5010UNv2:green:power"
;;
diff --git a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
index 70dbe2a..56a91de 100644
--- a/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
+++ b/target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc
@@ -24,6 +24,7 @@ case "$(brcm63xx_board_name)" in
hg622 |\
magic |\
p870hw-51a_v2 |\
+ p870hnu-51b |\
r5010un_v2 |\
rta770bw |\
rta770w |\
diff --git a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
index a2d6519..6669c7e 100755
--- a/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
+++ b/target/linux/brcm63xx/base-files/lib/brcm63xx.sh
@@ -249,6 +249,9 @@ brcm63xx_dt_detect() {
"Zyxel P870HW-51a v2")
board_name="p870hw-51a_v2"
;;
+ "Zyxel P870HNU-51b")
+ board_name="p870hnu-51b"
+ ;;
*)
board_name="unknown"
;;
diff --git a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
index 7e4dfcb..f17c497 100644
--- a/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
+++ b/target/linux/brcm63xx/base-files/lib/preinit/05_init_interfaces_brcm63xx
@@ -26,6 +26,7 @@ set_preinit_iface() {
hg622 |\
neufbox6 |\
p870hw-51a_v2 |\
+ p870hnu-51b |\
rta770bw |\
rta770w |\
spw303v |\
diff --git a/target/linux/brcm63xx/dts/p870hnu-51b.dts b/target/linux/brcm63xx/dts/p870hnu-51b.dts
new file mode 100644
index 0000000..451197c
--- /dev/null
+++ b/target/linux/brcm63xx/dts/p870hnu-51b.dts
@@ -0,0 +1,77 @@
+/dts-v1/;
+
+#include "bcm6368.dtsi"
+
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Zyxel P870HNU-51b";
+ compatible = "zyxel,p870hnu-51b", "brcm,bcm6368";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ debounce-interval = <60>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 2 1>;
+ linux,code = <KEY_RESTART>;
+ };
+ wps {
+ label = "wps";
+ gpios = <&gpio1 3 1>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power_green {
+ label = "P870HNU-51b:green:power";
+ gpios = <&gpio0 2 1>;
+ default-state = "on";
+ };
+ dsl_green {
+ label = "P870HNU-51b:green:dsl";
+ gpios = <&gpio0 23 1>;
+ };
+ dsl_orange {
+ label = "P870HNU-51b:orange:dsl";
+ gpios = <&gpio0 25 1>;
+ };
+ inet_red {
+ label = "P870HNU-51b:red:inet";
+ gpios = <&gpio1 1 0>;
+ };
+ wps_orange {
+ label = "P870HNU-51b:orange:wps";
+ gpios = <&gpio0 24 1>;
+ };
+ };
+};
+
+&pflash {
+ status = "ok";
+
+ linux,part-probe = "bcm63xxpart";
+
+ cfe at 0 {
+ label = "CFE";
+ reg = <0x000000 0x020000>;
+ read-only;
+ };
+
+ linux at 20000 {
+ label = "linux";
+ reg = <0x020000 0xfc0000>;
+ };
+
+ nvram at fe0000 {
+ label = "nvram";
+ reg = <0xfe0000 0x020000>;
+ };
+};
diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index e00b6fb..b4a4c85 100644
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -637,5 +637,7 @@ $(eval $(call bcm63xxCfe,TDW8900GB,TD-W8900GB,td-w8900gb,96348GW-11,6348,--rsa-s
$(eval $(call bcm63xxCfe,USR9108,USR9108,usr9108,96348GW-A,6348))
# ZyXEL P870HW-51a v2
$(eval $(call bcm63xxCfeZyxel,P870HW_51a_v2,P870HW-51a_v2,p870hw-51a-v2,96368VVW,6368,--rsa-signature "ZyXEL" --signature "ZyXEL_0001"))
+# ZyXEL P870HNU-51B
+$(eval $(call bcm63xxCfeZyxel,P870HNU_51b,P870HNU-51b,p870hnu-51b,96368MVWG,6368,--rsa-signature "ZyXEL" --signature "ZyXEL_4004" --pad 8 --image-offset 0x20000 --block-size 0x20000))
$(eval $(call BuildImage))
diff --git a/target/linux/brcm63xx/patches-4.1/575-board_P870HNU-51b.patch b/target/linux/brcm63xx/patches-4.1/575-board_P870HNU-51b.patch
new file mode 100644
index 0000000..6040f13
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.1/575-board_P870HNU-51b.patch
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2156,6 +2156,49 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_P870HNU51B = {
++ .name = "P870HNU-51b",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+ .name = "96368M-1541N",
+ .expected_cpu_id = 0x6368,
+@@ -2613,6 +2656,7 @@ static const struct board_info __initcon
+ &board_HG622,
+ &board_HG655b,
+ &board_P870HW51A_V2,
++ &board_P870HNU51B,
+ &board_VR3025u,
+ &board_VR3025un,
+ &board_VR3026e,
+@@ -2723,6 +2767,7 @@ static struct of_device_id const bcm963x
+ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
++ { .compatible = "zyxel,p870hnu-51b", .data = &board_P870HNU51B, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/patches-4.4/575-board_P870HNU-51b.patch b/target/linux/brcm63xx/patches-4.4/575-board_P870HNU-51b.patch
new file mode 100644
index 0000000..635d2b7
--- /dev/null
+++ b/target/linux/brcm63xx/patches-4.4/575-board_P870HNU-51b.patch
@@ -0,0 +1,68 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -2157,6 +2157,49 @@ static struct board_info __initdata boar
+ },
+ };
+
++static struct board_info __initdata board_P870HNU51B = {
++ .name = "P870HNU-51b",
++ .expected_cpu_id = 0x6368,
++
++ .has_uart0 = 1,
++ .has_pci = 1,
++ .use_fallback_sprom = 1,
++ .has_ohci0 = 1,
++ .has_ehci0 = 1,
++
++ .has_enetsw = 1,
++ .enetsw = {
++ .used_ports = {
++ [0] = {
++ .used = 1,
++ .phy_id = 1,
++ .name = "port1",
++ },
++ [1] = {
++ .used = 1,
++ .phy_id = 2,
++ .name = "port2",
++ },
++ [2] = {
++ .used = 1,
++ .phy_id = 3,
++ .name = "port3",
++ },
++ [3] = {
++ .used = 1,
++ .phy_id = 4,
++ .name = "port4",
++ },
++ },
++ },
++
++ .fallback_sprom = {
++ .type = SPROM_BCM4318,
++ .pci_bus = 0,
++ .pci_dev = 1,
++ },
++};
++
+ static struct board_info __initdata board_VR3025u = {
+ .name = "96368M-1541N",
+ .expected_cpu_id = 0x6368,
+@@ -2614,6 +2657,7 @@ static const struct board_info __initcon
+ &board_HG622,
+ &board_HG655b,
+ &board_P870HW51A_V2,
++ &board_P870HNU51B,
+ &board_VR3025u,
+ &board_VR3025un,
+ &board_VR3026e,
+@@ -2724,6 +2768,7 @@ static struct of_device_id const bcm963x
+ { .compatible = "huawei,hg655b", .data = &board_HG655b, },
+ { .compatible = "netgear,dgnd3700v1", .data = &board_DGND3700v1_3800B, },
+ { .compatible = "zyxel,p870hw-51a-v2", .data = &board_P870HW51A_V2, },
++ { .compatible = "zyxel,p870hnu-51b", .data = &board_P870HNU51B, },
+ #endif
+ #ifdef CONFIG_BCM63XX_CPU_63268
+ { .compatible = "brcm,bcm963268bu_p300", .data = &board_963268bu_p300, },
diff --git a/target/linux/brcm63xx/profiles/zyxel.mk b/target/linux/brcm63xx/profiles/zyxel.mk
index 3aca094..81968ff 100644
--- a/target/linux/brcm63xx/profiles/zyxel.mk
+++ b/target/linux/brcm63xx/profiles/zyxel.mk
@@ -13,3 +13,12 @@ define Profile/P870HW_51a_v2/Description
Package set optimized for P870HW-51a v2.
endef
$(eval $(call Profile,P870HW_51a_v2))
+define Profile/P870HNU_51b
+ NAME:=ZyXEL P870HNU-51b
+ PACKAGES:=kmod-b43 wpad-mini \
+ kmod-usb2 kmod-usb-ohci
+endef
+define Profile/P870HNU_51b/Description
+ Package set optimized for P870HNU-51b.
+endef
+$(eval $(call Profile,P870HNU_51b))
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list