[OpenWrt-Devel] [PATCH] brcm47xx: Mark broken; no working images

[Daniel Dickinson]

Apparently my tree got trashed and I need to do distclean.  Sorry for 
the noise.

Regards,

Daniel

On 14/01/16 11:25 AM, Daniel Dickinson wrote:
> Ah, ok, so there likley there are are pobablly not any working *stock*
> devices.  That merits the @BROKEN flag - if you're running modified
> hardware you can surely build with BROKEN enabled.
>
> Regards,
>
> Daniel
>
> On 14/01/16 11:22 AM, Arnd Gronenberg wrote:
>> I'm running openwrt on several WRT54GLs upgraded to 8MB Flash and 64MB
>> RAM...
>>
>> Regards, Arnd
>>
>> On 01/14/2016 04:31 PM, openwrt at daniel.thecshore.com wrote:
>>> From: Daniel Dickinson <openwrt at daniel.thecshore.com>
>>>
>>> To my knowledge there are no working images, nor a way to get them,
>>> even using maximum stripping and dropping of packages, kmods, and
>>> compile options due to the small size of the targets for this
>>> architecture.  Therefore mark this arch broken and maybe remove
>>> unless someone decides to fix it.
>>>
>>> Signed-off-by: Daniel Dickinson <openwrt at daniel.thecshore.com>
>>> ---
>>>   target/linux/brcm47xx/Makefile | 1 +
>>>   1 file changed, 1 insertion(+)
>>>
>>> diff --git a/target/linux/brcm47xx/Makefile
>>> b/target/linux/brcm47xx/Makefile
>>> index e0c44c8..fae1f59 100644
>>> --- a/target/linux/brcm47xx/Makefile
>>> +++ b/target/linux/brcm47xx/Makefile
>>> @@ -12,6 +12,7 @@ BOARDNAME:=Broadcom BCM47xx/53xx (MIPS)
>>>   FEATURES:=squashfs usb
>>>   SUBTARGETS:=generic mips74k legacy
>>>   MAINTAINER:=Hauke Mehrtens <hauke at hauke-m.de>
>>> +DEPENDS:=@BROKEN
>>>   KERNEL_PATCHVER:=4.1
>>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel