November 2018 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Thu Nov 1 02:03:06 EDT 2018
Ending: Fri Nov 30 20:51:35 EST 2018
Messages: 371

• [OpenWrt-Devel] (no subject)   Arian Sanusi
• [OpenWrt-Devel] [LEDE-DEV] ieee80211 phy0: rt2x00queue_write_tx_frame: Error - Dropping frame due to full tx queue...?   Daniel Santos
• [OpenWrt-Devel] [PATCH/RFC] uqmi: allow matching IMSI for qmi networks   Daniel Golle
• [OpenWrt-Devel] [PATCH 0/1] libubox installs incorrectly on Ubuntu due to incorrect LUAPATH   Sergey Ponomarev
• [OpenWrt-Devel] [PATCH 0/1] libubox installs incorrectly on Ubuntu due to incorrect LUAPATH   Petr Štetiar
• [OpenWrt-Devel] [PATCH 0/1] libubox installs incorrectly on Ubuntu due to incorrect LUAPATH   Sergey Ponomarev
• [OpenWrt-Devel] [PATCH 0/2] lantiq: udpate kernel config   Florian Eckert
• [OpenWrt-Devel] [PATCH 0/2] Make diag.sh more DTS generic so it could be reused   Petr Štetiar
• [OpenWrt-Devel] [PATCH 0/3] libubox: Enhance robustness of blobmsg parsing   Tobias Schramm
• [OpenWrt-Devel] [PATCH 0/3] libubox: Enhance robustness of blobmsg parsing   Yousong Zhou
• [OpenWrt-Devel] [PATCH 0/3] libubox: Enhance robustness of blobmsg parsing   Tobias Schramm
• [OpenWrt-Devel] [PATCH 1/1] libubox/lua/CMakeLists.txt: fix LUAPATH so it will use /usr/lib/ instead of /usr/local/lib/   Sergey Ponomarev
• [OpenWrt-Devel] [PATCH 1/1] libubox/lua/CMakeLists.txt: fix LUAPATH so it will use /usr/lib/ instead of /usr/local/lib/   Petr Štetiar
• [OpenWrt-Devel] [PATCH 1/2] ath79: add firmware partition compatible for OCEDO   David Bauer
• [OpenWrt-Devel] [PATCH 1/2] base-files: diag.sh: Make it more generic towards DTS so it could be reused   Petr Štetiar
• [OpenWrt-Devel] [PATCH 1/2] kernel: add DT binding support to AVM EVA parser   David Bauer
• [OpenWrt-Devel] [PATCH 1/2] lantiq: sync kernel CONFIG_TARGET   Florian Eckert
• [OpenWrt-Devel] [PATCH 1/2] lantiq: sync kernel CONFIG_TARGET   Mathias Kresin
• [OpenWrt-Devel] [PATCH 1/2] lantiq: sync kernel CONFIG_TARGET   Florian Eckert
• [OpenWrt-Devel] [PATCH 1/3] brcm63xx: VH4032N: fix issues with pinctrl   Daniel Gonzalez Cabanelas
• [OpenWrt-Devel] [PATCH 1/3] Ensure blob_attr length check does not perform out of bounds reads   Tobias Schramm
• [OpenWrt-Devel] [PATCH 1/3] Ensure blob_attr length check does not perform out of bounds reads   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/3] Ensure blob_attr length check does not perform out of bounds reads   Tobias Schramm
• [OpenWrt-Devel] [PATCH 1/3] kernel: ar83xx: Add support for three GMAC's connection   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] kernel: ar83xx: Add support for three GMAC's connection   Ram Chandra Jangir
• [OpenWrt-Devel] [PATCH 1/3] rb532: add 4.14 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 1/4] ramips: use new image build code for D-Link DCS-930 family   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/2] ath79, ipq40xx, ramips: base-files: Remove duplicate diag.sh and use generic one   Petr Štetiar
• [OpenWrt-Devel] [PATCH 2/2] ath79: add Archer C58/C59 partition compatible   David Bauer
• [OpenWrt-Devel] [PATCH 2/2] ath79: add AVM 4020 firmware partition compatible   David Bauer
• [OpenWrt-Devel] [PATCH 2/2] lantiq: enable LEDS_TRIGGER_MTD support   Florian Eckert
• [OpenWrt-Devel] [PATCH 2/2] lantiq: enable LEDS_TRIGGER_MTD support   Mathias Kresin
• [OpenWrt-Devel] [PATCH 2/3] brcm63xx: VH4032N: fix the power led and the wlan button   Daniel Gonzalez Cabanelas
• [OpenWrt-Devel] [PATCH 2/3] rb532: switch to 4.14   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Tobias Schramm
• [OpenWrt-Devel] [PATCH 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Tobias Schramm
• [OpenWrt-Devel] [PATCH 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Tobias Schramm
• [OpenWrt-Devel] [PATCH 2/4] ramips: drop support for legacy images   Mathias Kresin
• [OpenWrt-Devel] [PATCH 3/3] Add _safe variants for all attribute checking methods   Tobias Schramm
• [OpenWrt-Devel] [PATCH 3/3] brcm63xx: VH4032N: add the SPROM fixups   Daniel Gonzalez Cabanelas
• [OpenWrt-Devel] [PATCH 3/3] rb532: drop 4.9 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 3/4] ramips: enforce image metadata verification   Mathias Kresin
• [OpenWrt-Devel] [PATCH 3/4] ramips: enforce image metadata verification   Petr Štetiar
• [OpenWrt-Devel] [PATCH 4/4] ramips: drop old image validation code   Mathias Kresin
• [OpenWrt-Devel] [PATCH 5/5] mesongx: new target   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH 5/5] mesongx: new target   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH][18.06] apm821xx: MBL: load kernel/dtb from SATA 0:1 first   John Crispin
• [OpenWrt-Devel] [PATCH] Add generic actions to sched-core   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] Add generic actions to sched-core   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] Allow VLAN filtering if needed.   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] Allow VLAN filtering if needed.   Felix Fietkau
• [OpenWrt-Devel] [PATCH] Allow VLAN filtering if needed.   Bjørn Mork
• [OpenWrt-Devel] [PATCH] ar71xx: add support for UniFi-AC-Mesh-Pro   Christoph Krapp via openwrt-devel
• [OpenWrt-Devel] [PATCH] ar71xx: add support for UniFi-AC-Mesh-Pro   Christoph Krapp via openwrt-devel
• [OpenWrt-Devel] [PATCH] ath79:add partition compatiable gl_x750 and ar300m_nor   Luochongjun
• [OpenWrt-Devel] [PATCH] ath79:add partition compatiable gl_x750 and ar300m_nor   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: add support for GL-iNet GL-X750   Luochongjun
• [OpenWrt-Devel] [PATCH] ath79: add support for GL-iNet GL-X750   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] ath79: add support for GL-iNet GL-X750   Luochongjun
• [OpenWrt-Devel] [PATCH] ath79: add support for TP-Link Archer A7   Karl-Felix Glatzer
• [OpenWrt-Devel] [PATCH] ath79: add support for TP-Link Archer A7   David Bauer
• [OpenWrt-Devel] [PATCH] ath79: add support for TP-Link Archer A7   Karl-Felix Glatzer
• [OpenWrt-Devel] [PATCH] ath79: add support for Ubiquiti AirRouter   Russell Senior
• [OpenWrt-Devel] [PATCH] ath79: add support for Ubiquiti AirRouter   Chuanhong Guo
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   mail at adrianschmutzler.de
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Lech Perczak
• [OpenWrt-Devel] [PATCH] ath79: Add support for Ubiquity Bullet M2HP   Joe Ayers
• [OpenWrt-Devel] [PATCH] ath79: ubnt-m-xw: Fix factory image flashing using TFTP recovery method   Petr Štetiar
• [OpenWrt-Devel] [PATCH] base-files: fwtool: Fix wrong checksum on combined-image with metadata   Petr Štetiar
• [OpenWrt-Devel] [PATCH] base-files: sysupgrade: Allow downloading of firmware images using HTTPS   Petr Štetiar
• [OpenWrt-Devel] [PATCH] brcm63xx: perform a soft reset on the ehternet switch before its initializiation   Daniel Gonzalez Cabanelas
• [OpenWrt-Devel] [PATCH] brcm63xx: VH4032N: add missing pinctrl   Daniel Gonzalez Cabanelas
• [OpenWrt-Devel] [PATCH] build: Add append-uboot-spl command   Petr Štetiar
• [OpenWrt-Devel] [PATCH] build: Add append-uboot-spl command   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] build: Add append-uboot-spl command   Petr Štetiar
• [OpenWrt-Devel] [PATCH] build: Add append-uboot-spl command   Petr Štetiar
• [OpenWrt-Devel] [PATCH] build: Introduce building of artifacts   Petr Štetiar
• [OpenWrt-Devel] [PATCH] build: Introduce building of artifacts   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] cryptodev-linux: move from packages feed   Eneas U de Queiroz via openwrt-devel
• [OpenWrt-Devel] [PATCH] cryptodev-linux: move from packages feed   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] cryptodev-linux: move from packages feed   Eneas Ulir de Queiroz via openwrt-devel
• [OpenWrt-Devel] [PATCH] flex: Add a lex symlink   Rosen Penev
• [OpenWrt-Devel] [PATCH] fstools: guard usage of WEXITSTATUS   Michael Heimpold
• [OpenWrt-Devel] [PATCH] fstools: use EXIT_FAILURE when indicating error on exit   Michael Heimpold
• [OpenWrt-Devel] [PATCH] hostapd: add utf8_ssid flag & enable as default   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] [PATCH] imx6: image: ventana: Add missing BOOT_SCRIPT variable   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ipq40xx: fix NBG6617 LED mapping   David Bauer
• [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching   Ben Greear
• [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ipq806x: add ath10k calibration data MAC addresses patching   Ben Greear
• [OpenWrt-Devel] [PATCH] jffs2: Fix use of uninitialized delayed_work, lockdep breakage   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] kernel-version: group kernel information by version   Luis Araneda
• [OpenWrt-Devel] [PATCH] kernel: Add AEAD and RNG support to kmod-crypto-user   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: add option to root .config for /proc/config.gz   Daniel Santos
• [OpenWrt-Devel] [PATCH] kernel: add option to root .config for /proc/config.gz   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] kernel: ar8xxx: get_arl_table now shows all ports of an entry   Günther Kelleter
• [OpenWrt-Devel] [PATCH] kernel: ar8xxx: get_arl_table now shows all ports of an entry   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: drop unused arch_split_mtd_part()   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] lantiq: add support for Fritz!Box 7360v2   Reinhard Max
• [OpenWrt-Devel] [PATCH] lantiq: add support for Fritz!Box 7360v2   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] octeon: Allow sysupgrade restore on ER   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] octeon: Allow sysupgrade restore on ER   Stijn Tintel
• [OpenWrt-Devel] [PATCH] octeon: Allow sysupgrade restore on ER   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] odhcpd: allow specifying lease trigger mode   Michał Kępień via openwrt-devel
• [OpenWrt-Devel] [PATCH] packages/python-idna: Add missing dependency on python(3)-codecs   Daniel Santos
• [OpenWrt-Devel] [PATCH] packages/python-idna: Add missing dependency on python(3)-codecs   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] ralink: Add support for GPIO as interrupt-controller   Daniel Santos
• [OpenWrt-Devel] [PATCH] ralink: Add support for GPIO as interrupt-controller   Rosen Penev
• [OpenWrt-Devel] [PATCH] ralink: Add support for GPIO as interrupt-controller   Daniel Santos
• [OpenWrt-Devel] [PATCH] ralink: Add support for GPIO as interrupt-controller   Rosen Penev
• [OpenWrt-Devel] [PATCH] ralink: Add support for GPIO as interrupt-controller   Daniel Santos
• [OpenWrt-Devel] [PATCH] ramips: add support for Skylab SKW92A in EVB   Russell Senior
• [OpenWrt-Devel] [PATCH] ramips: add support for Skylab SKW92A in EVB   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] ramips: Add support for ZTE ZXECS EBG3130 aka BDCOM WAP2100-SK   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ramips: fix alphabetic ordering of skylab, skw92a in ramips_setup_interfaces   Russell Senior
• [OpenWrt-Devel] [PATCH] ramips: fix ethernet for f5d8235-v2 board   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ramips: fix leds on GL.iNet GL-MT300N-V2   hexa at darmstadt.ccc.de
• [OpenWrt-Devel] [PATCH] ramips: fix leds on GL.iNet GL-MT300N-V2   Alexander Couzens
• [OpenWrt-Devel] [PATCH] ramips: upgrade: Enable checking of image metadata   Petr Štetiar
• [OpenWrt-Devel] [PATCH] ramips: upgrade: Enable checking of image metadata   Mathias Kresin
• [OpenWrt-Devel] [PATCH] ramips: upgrade: Enable checking of image metadata   Petr Štetiar
• [OpenWrt-Devel] [PATCH] Revert "iptables: fix dependency for libip6tc on IPV6"   Petr Štetiar
• [OpenWrt-Devel] [PATCH] rtl8812au: Add out-of-tree driver.   greearb at candelatech.com
• [OpenWrt-Devel] [PATCH] rtl8812au: Add out-of-tree driver.   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] strace: update to 4.25   Syrone Wong
• [OpenWrt-Devel] [PATCH] tools: tplink-safeloader: add C7v5 EU SupportList   David Bauer
• [OpenWrt-Devel] [PATCH] valgrind: enable LTO and refresh patches   Syrone Wong
• [OpenWrt-Devel] [PATCH] valgrind: enable LTO and refresh patches   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] valgrind: enable LTO and refresh patches   Syrone Wong
• [OpenWrt-Devel] [PATCH] wireguard: bump to 0.0.20181115   Jason A. Donenfeld
• [OpenWrt-Devel] [PATCH] wireguard: bump to 0.0.20181115   Hans Dedecker
• [OpenWrt-Devel] [PATCH] wireguard: bump to 0.0.20181119   Jason A. Donenfeld
• [OpenWrt-Devel] [PATCH] wireguard: bump to 0.0.20181119   Hans Dedecker
• [OpenWrt-Devel] [PATCH] x86: make sysupgrade.tgz reachable again   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH] x86: make sysupgrade.tgz reachable again   Lucian Cristian
• [OpenWrt-Devel] [PATCH fstools 1/2] block: make umount_device() function more generic   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools 1/4] block: fix formatting & indent in the mount_device()   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools 2/2] block: don't duplicate unmounting code in the mount_action()   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools 2/4] block: move blockd_notify() call out of the conditional blocks   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools 3/4] block: simplify code picking mount target directory   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools 4/4] block: don't duplicate mounting code in the mount_device()   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools RFC] block: generate hotplug.d mount even "add" after mounting   Rafał Miłecki
• [OpenWrt-Devel] [PATCH fstools RFC] block: generate hotplug.d mount even "add" after mounting   John Crispin
• [OpenWrt-Devel] [PATCH fstools RFC] block: generate hotplug.d mount even "add" after mounting   Michael Heimpold
• [OpenWrt-Devel] [PATCH fstools RFC] block: generate hotplug.d mount even "add" after mounting   Rafał Miłecki
• [OpenWrt-Devel] [PATCH procd ] early: set /tmp permissions explicitly   Hans Dedecker
• [OpenWrt-Devel] [PATCH procd ] early: set /tmp permissions explicitly   John Crispin
• [OpenWrt-Devel] [PATCH procd] watchdog: improve seting watchdog timeout and frequency   Hans Dedecker
• [OpenWrt-Devel] [PATCH v2 0/3] libubox: Enhance robustness of blobmsg parsing   Tobias Schramm
• [OpenWrt-Devel] [PATCH v2 1/1] kernel: ar8xxx: get_arl_table now shows all ports of an entry   Günther Kelleter
• [OpenWrt-Devel] [PATCH v2 1/1] kernel: ar8xxx: get_arl_table now shows all ports of an entry   John Crispin
• [OpenWrt-Devel] [PATCH v2 1/3] Ensure blob_attr length check does not perform out of bounds reads   Tobias Schramm
• [OpenWrt-Devel] [PATCH v2 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Tobias Schramm
• [OpenWrt-Devel] [PATCH v2 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 3/3] Add _safe variants for all attribute checking methods   Tobias Schramm
• [OpenWrt-Devel] [PATCH v2 3/3] Add _safe variants for all attribute checking methods   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2 3/3] Add _safe variants for all attribute checking methods   Tobias Schramm
• [OpenWrt-Devel] [PATCH v2][18.06] apm821xx: MBL: load kernel/dtb from SATA 0:1 first   Christian Lamparter
• [OpenWrt-Devel] [PATCH v2] Add generic actions to sched-core   Jonathan Thibault
• [OpenWrt-Devel] [PATCHv2] Allow VLAN filtering if needed.   Jonathan Thibault
• [OpenWrt-Devel] [PATCHv2] Allow VLAN filtering if needed.   Daniel Golle
• [OpenWrt-Devel] [PATCHv2] Allow VLAN filtering if needed.   Daniel Golle
• [OpenWrt-Devel] [PATCHv2] Allow VLAN filtering if needed.   Jonathan Thibault
• [OpenWrt-Devel] [PATCHv2] Allow VLAN filtering if needed.   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2] apm821xx, ath79, ipq40xx, ipq806x, lantiq, ramips: base-files: Use generic diag.sh   Petr Štetiar
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   Karl-Felix Glatzer
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   Karl-Felix Glatzer
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   John Crispin
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   Karl-Felix Glatzer
• [OpenWrt-Devel] [PATCH v2] ath79: add support for TP-Link Archer A7   David Bauer
• [OpenWrt-Devel] [PATCHv2] ath79: add support for Ubiquiti AirRouter   Russell Senior
• [OpenWrt-Devel] [PATCHv2] ath79: add support for Ubiquiti AirRouter   John Crispin
• [OpenWrt-Devel] [PATCHv2] ath79: add support for Ubiquiti AirRouter   Russell Senior
• [OpenWrt-Devel] [PATCHv2] ath79: add support for Ubiquiti AirRouter   Mathias Kresin
• [OpenWrt-Devel] [PATCHv2] ath79: add support for Ubiquiti AirRouter   Russell Senior
• [OpenWrt-Devel] [PATCHv2] ath79: add support for Ubiquiti AirRouter   Russell Senior
• [OpenWrt-Devel] [PATCH v2] ath79: Add support for Ubiquity Bullet M (XW)   Petr Štetiar
• [OpenWrt-Devel] [PATCH v2] cryptodev-linux: move from packages feed   Eneas U de Queiroz via openwrt-devel
• [OpenWrt-Devel] [PATCH v2] lantiq: enable LEDS_TRIGGER_MTD support   Florian Eckert
• [OpenWrt-Devel] [PATCH v2] octeon: Allow sysupgrade restore on ER   Jonathan Thibault
• [OpenWrt-Devel] [PATCH v2] octeon: Allow sysupgrade restore on ER   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v2] uqmi: allow matching IMSI for qmi networks   Daniel Golle
• [OpenWrt-Devel] [PATCH v3 0/3] libubox: Enhance robustness of blobmsg parsing   Tobias Schramm
• [OpenWrt-Devel] [PATCHv3 1/2] ath79: split ubnt outdoor device leds into separate dtsi   Russell Senior
• [OpenWrt-Devel] [PATCH v3 1/3] Ensure blob_attr length check does not perform out of bounds reads   Tobias Schramm
• [OpenWrt-Devel] [PATCH v3 1/3] Ensure blob_attr length check does not perform out of bounds reads   Yousong Zhou
• [OpenWrt-Devel] [PATCHv3 2/2] ath79: add support for Ubiquiti AirRouter   Russell Senior
• [OpenWrt-Devel] [PATCH v3 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Tobias Schramm
• [OpenWrt-Devel] [PATCH v3 3/3] Add _safe variants for all attribute checking methods   Tobias Schramm
• [OpenWrt-Devel] [PATCH v3 3/3] Add _safe variants for all attribute checking methods   Felix Fietkau
• [OpenWrt-Devel] [PATCH v3 3/3] Add _safe variants for all attribute checking methods   Tobias Schramm
• [OpenWrt-Devel] [PATCH v3 3/6] x86: add packages files to image bootfs   Philip Prindeville
• [OpenWrt-Devel] [PATCH v3 3/6] x86: add packages files to image bootfs   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v3] octeon: Allow sysupgrade restore on ER   Jonathan Thibault
• [OpenWrt-Devel] [PATCHv3] ramips: add support for Skylab SKW92A in EVB   Russell Senior
• [OpenWrt-Devel] [PATCHv3] ramips: add support for Skylab SKW92A in EVB   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v3] uqmi: allow matching IMSI for qmi networks   Daniel Golle
• [OpenWrt-Devel] [PATCH v3] uqmi: allow matching IMSI for qmi networks   Piotr Dymacz
• [OpenWrt-Devel] [PATCH v3] uqmi: allow matching IMSI for qmi networks   Daniel Golle
• [OpenWrt-Devel] [PATCH v3] uqmi: allow matching IMSI for qmi networks   Bjørn Mork
• [OpenWrt-Devel] [PATCH v4 0/3] libubox: Enhance robustness of blobmsg parsing   Tobias Schramm
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Lucian Cristian
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Lucian Cristian
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Lucian Cristian
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   John Crispin
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Lucian Cristian
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   John Crispin
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Lucian Cristian
• [OpenWrt-Devel] [PATCH v4 0/6] intel-microcode: load as early as possible   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 1/2] kernel: revert bad module stripping patch   Daniel Santos
• [OpenWrt-Devel] [PATCH v4 1/3] Ensure blob_attr length check does not perform out of bounds reads   Tobias Schramm
• [OpenWrt-Devel] [PATCH v4 1/6] include/rootfs.mk: remove boot directory   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 2/2] kernel: rework module stripping, add Kconfig option   Daniel Santos
• [OpenWrt-Devel] [PATCH v4 2/3] Replace use of blobmsg_check_attr by blobmsg_check_attr_safe   Tobias Schramm
• [OpenWrt-Devel] [PATCH v4 2/6] x86: mount writable bootfs   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 3/3] Add _safe variants for all attribute checking methods   Tobias Schramm
• [OpenWrt-Devel] [PATCH v4 3/6] x86: add packages files to image bootfs   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 4/6] intel-microcode: remove dependency on iucode-tool   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 5/6] x86: add intel microcode entries to grub config   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 5/6] x86: add intel microcode entries to grub config   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v4 5/6] x86: add intel microcode entries to grub config   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 5/6] x86: add intel microcode entries to grub config   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 6/6] intel-microcode: create early load microcode image   Tomasz Maciej Nowak
• [OpenWrt-Devel] [PATCH v4 6/6] intel-microcode: create early load microcode image   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v4 6/6] intel-microcode: create early load microcode image   Tomasz Maciej Nowak
• [OpenWrt-Devel] [RFC 00/27] Add support for kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 01/27] kernel: Reorder configuration   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 02/27] kernel: Replace ledtrig-netdev with upstream backport   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 03/27] kernel: Move modifications of b53.h into patch   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 04/27] kernel: Copy patches from kernel 4.14 to 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 05/27] kernel: Make the patches apply on top of 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 06/27] kernel: Add kmod-phy-realtek   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 06/27] kernel: Add kmod-phy-realtek   Yousong Zhou
• [OpenWrt-Devel] [RFC 06/27] kernel: Add kmod-phy-realtek   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 07/27] kernel: Deactivate *-gpio-custom drivers for 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 08/27] i2c-gpio-custom: Adapt to moved include file   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 09/27] kernel: Use kmod-dax on kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 10/27] kernel: Adapt to moved kvaser_usb.ko in kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 11/27] kernel: add missing dependency to kmod-crypto-acompress   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 12/27] kernel: extract asn1_decoder.ko   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 13/27] kernel: Remove crypto/ablk_helper.ko on kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 14/27] kernel: Add dependencies for kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 15/27] kernel: Adapt to new location of video-videobuf2 in kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 16/27] kernel: Adapt to move of autofs4 in kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 17/27] kernel: Make kmod-mpls depend on iptunnel in kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 18/27] kernel: Always activate CONFIG_HW_RANDOM_TPM   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 19/27] kernel: Make video-gspca-core depend on vidobuf2   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 20/27] kernel: Add missing dependency to kmod-regmap   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 21/27] kernel: tg3: Do not depend on kmod-hwmon-core on kernel 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 22/27] kernel: Make CONFIG_NVMEM tristate   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 23/27] kernel: netfilter: Add nf_defrag_ipv6.ko to NF_CONNTRACK on 4.19   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 24/27] kernel: netfilter: Add nf_tproxy_ipv{4, 6} and nf_socket_ipv{4, 6}   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 25/27] kernel: netfilter: Add nf_conncount.ko   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 26/27] kernel: netfilter: Adapt merge ipv4/ipv6 masquerade code   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 26/27] kernel: netfilter: Adapt merge ipv4/ipv6 masquerade code   Yousong Zhou
• [OpenWrt-Devel] [RFC 26/27] kernel: netfilter: Adapt merge ipv4/ipv6 masquerade code   Hauke Mehrtens
• [OpenWrt-Devel] [RFC 26/27] kernel: netfilter: Adapt merge ipv4/ipv6 masquerade code   Yousong Zhou
• [OpenWrt-Devel] [RFC 27/27] kernel: netfilter: chain filters merged into nf_tables.ko   Hauke Mehrtens
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Daniel Santos
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Felix Fietkau
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Daniel Santos
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Jo-Philipp Wich
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Felix Fietkau
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Stijn Segers
• [OpenWrt-Devel] [RFC PATCH] build: re-enable parallelism for mksquashfs   Daniel Santos
• [OpenWrt-Devel] [uhttpd PATCH] help: document -A option   Karl Pálsson
• [OpenWrt-Devel] Add "Stale" plugin to packages feed   Jo-Philipp Wich
• [OpenWrt-Devel] ath79: pinctrl question, ar71xx migration   Sebastian Kemper
• [OpenWrt-Devel] ath79 ascii mac + led open drain   Sebastian Kemper
• [OpenWrt-Devel] ath79 ascii mac + led open drain   Sebastian Kemper
• [OpenWrt-Devel] ath9k: Max 3 dBi gain for FCC (365-ath9k-adjust-tx-power-reduction-for-US-regulatory-do.patch)   Sven Eckelmann
• [OpenWrt-Devel] brcm2708: add kernel 4.14 support   Stijn Tintel
• [OpenWrt-Devel] brcm2708: add kernel 4.14 support   Alexandru Ardelean
• [OpenWrt-Devel] brcm2708: add kernel 4.14 support   Stijn Tintel
• [OpenWrt-Devel] brcm2708: add kernel 4.14 support   Christian Lamparter
• [OpenWrt-Devel] brcm2708: add kernel 4.14 support   Stijn Tintel
• [OpenWrt-Devel] Buildbot packages faillogs contain stale info   Hannu Nyman
• [OpenWrt-Devel] CCC and OpenWrt: Technical guideline of German BSI for secure routers insufficient   Hauke Mehrtens
• [OpenWrt-Devel] coverity: ignore kernel directory   Alexander Couzens
• [OpenWrt-Devel] Custom cases for Netgear r7800?   Ben Greear
• [OpenWrt-Devel] Custom cases for Netgear r7800?   Alberto Bursi
• [OpenWrt-Devel] Custom cases for Netgear r7800?   Hannu Nyman
• [OpenWrt-Devel] Does anyone use kmod-trelay? Is it better than relayd?   Alberto Bursi
• [OpenWrt-Devel] Enable security labels on ext4?   W. Michael Petullo
• [OpenWrt-Devel] Enable security labels on ext4?   Jo-Philipp Wich
• [OpenWrt-Devel] Enable security labels on ext4?   Etienne Champetier
• [OpenWrt-Devel] Enable security labels on ext4?   W. Michael Petullo
• [OpenWrt-Devel] GPL Violation to chase + Engenius/Senao firmware non-update   Michael Holstein
• [OpenWrt-Devel] GPL Violation to chase + Engenius/Senao firmware non-update   Michael Holstein
• [OpenWrt-Devel] GSoC 2019 announced   Andreas Bräu
• [OpenWrt-Devel] Merged: ipq40xx: fix NBG6617 LED mapping   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] Merged: kernel: b53: register switch on probe   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] Merged: tools: tplink-safeloader: add C7v5 EU SupportList   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] Moving Ubiquity Nanostation M (XW) from ar71xx to ath79 [Was: openwrt-devel Digest, Vol 31, Issue 43]   Petr Štetiar
• [OpenWrt-Devel] openwrt-devel Digest, Vol 31, Issue 19   Michael Holstein
• [OpenWrt-Devel] openwrt-devel Digest, Vol 31, Issue 40   Joe Ayers
• [OpenWrt-Devel] openwrt-devel Digest, Vol 31, Issue 43   Joe Ayers
• [OpenWrt-Devel] OpenWrt on RISC-V   Zoltan HERPAI
• [OpenWrt-Devel] OpenWrt on RISC-V   Alex Guo
• [OpenWrt-Devel] OpenWrt on RISC-V   Outback Dingo
• [OpenWrt-Devel] OpenWrt on RISC-V   Alex Guo
• [OpenWrt-Devel] OpenWrt Roadmap   Hauke Mehrtens
• [OpenWrt-Devel] OpenWrt Roadmap   Robert Marko
• [OpenWrt-Devel] OpenWrt Roadmap   Rosen Penev
• [OpenWrt-Devel] OpenWrt Roadmap   Hauke Mehrtens
• [OpenWrt-Devel] OpenWrt Roadmap   Robert Marko
• [OpenWrt-Devel] OpenWrt Roadmap   Fernando Frediani
• [OpenWrt-Devel] OpenWrt Roadmap   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] OpenWrt Roadmap   Alberto Bursi
• [OpenWrt-Devel] OpenWrt Roadmap   John Clark via openwrt-devel
• [OpenWrt-Devel] OpenWrt Roadmap   Fernando Frediani
• [OpenWrt-Devel] OpenWrt Roadmap   David Lang
• [OpenWrt-Devel] OpenWrt Roadmap   Alberto Bursi
• [OpenWrt-Devel] OpenWrt Roadmap   Alberto Bursi
• [OpenWrt-Devel] OpenWrt Roadmap   Fernando Frediani
• [OpenWrt-Devel] OpenWrt Roadmap   Rosen Penev
• [OpenWrt-Devel] package source download site / 0 byte files at one mirror / buildbot failing   Hannu Nyman
• [OpenWrt-Devel] PCP and Allow Port Forward for IPv6   Fernando Frediani
• [OpenWrt-Devel] Proposal for managing the kernel patches.   Ben Greear
• [OpenWrt-Devel] Proposal for managing the kernel patches.   Daniel Santos
• [OpenWrt-Devel] SMS @ OpenWrt   Joan Moreau via openwrt-devel
• [OpenWrt-Devel] Specifying "firmware" partition format on all DTS targets   Rafał Miłecki
• [OpenWrt-Devel] TP-Link Archer C20 v4 and MediaTek MT7628AN and MT7610E   Fernando Frediani
• [OpenWrt-Devel] umdns vs avahi: differences in browse (missing ip addresses)   Karl Palsson
• [OpenWrt-Devel] umdns vs avahi: differences in browse (missing ip addresses)   Karl Palsson
• [OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx   Clément Péron
• [OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx   Clément Péron
• [OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx   Robert Marko
• [OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx   Clément Péron
• [OpenWrt-Devel] Why does perl get compiled even if it not selected by any package?   Hannu Nyman
• [OpenWrt-Devel] Why does perl get compiled even if it not selected by any package?   Jo-Philipp Wich
• [OpenWrt-Devel] znc: configure listeners in modern way   user1024
• [OpenWrt-Devel] znc: configure listeners in modern way   Hans Dedecker

Last message date: Fri Nov 30 20:51:35 EST 2018
Archived on: Thu Jun 25 05:56:33 EDT 2020

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...