[OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx

[Clément Péron]

Hi Robert,

On Fri, 9 Nov 2018 at 18:11, Robert Marko <robimarko at gmail.com> wrote:
>
> Take a look at this example.
> https://github.com/openwrt/openwrt/pull/713#issuecomment-369844218

Many Thanks, I will check this

Regards,
Clement

>
> You have to use ath10k-bdencoder
> On Fri, 9 Nov 2018 at 16:07, Clément Péron <peron.clem at gmail.com> wrote:
> >
> > Hi Robert,
> >
> > Thanks for the info, I have looked at the ipq-wifi but for exemple the
> > "board-zyxel_nbg6617.bin" and "board-zyxel_wre6606.bin" are already
> > combined into one board.bin. and they just replace the board-2.bin,
> > But how are they combined ?
> >
> > I have seems some example to upstream the BDFs like here :
> > http://lists.infradead.org/pipermail/ath10k/2018-April/011179.html
> >
> > But they don't explain how to combine both 2G and 5G together.
> >
> > Thanks,
> > Clement
> >
> > On Fri, 9 Nov 2018 at 15:47, Robert Marko <robimarko at gmail.com> wrote:
> > >
> > > You have to use the ipq-wifi package
> > >
> > > On Fri, Nov 9, 2018, 15:25 Clément Péron <peron.clem at gmail.com wrote:
> > >>
> > >> Hi,
> > >>
> > >> I'm using a IPQ40xx board with kernel 4.14 (DK05 variant), I have
> > >> successfully extract the pre-cal but i'm now stuck at the board-2.bin
> > >> loading.
> > >>
> > >> When booting the ath10k_pci is looking for
> > >> "bus=ahb,bmi-chip-id=0,bmi-board-id=16" and a
> > >> "bus=ahb,bmi-chip-id=0,bmi-board-id=27" however these board-id are
> > >> unknown in the board-2.bin file.
> > >>
> > >> Looking at the Qualcomm OpenWRT release there is some board files that
> > >> are not available in the upstream board-2.bin.
> > >>
> > >> Like
> > >> boardData_1_0_IPQ4019_DK01_2G.bin
> > >> boardData_1_0_IPQ4019_DK01_5G.bin
> > >> boardData_1_0_IPQ4019_DK03_2G.bin
> > >> boardData_1_0_IPQ4019_DK03_5G.bin
> > >> boardData_1_0_IPQ4019_DK05_2G.bin
> > >> boardData_1_0_IPQ4019_DK05_5G.bin
> > >> etc....
> > >>
> > >> Is there anyway to force the driver to load one of this file instead
> > >> of looking for the board-2.bin ?
> > >>
> > >> Thanks,
> > >> Clement
> > >>
> > >> _______________________________________________
> > >> openwrt-devel mailing list
> > >> openwrt-devel at lists.openwrt.org
> > >> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel