[OpenWrt-Devel] [PATCH] ath79: add support for GL-iNet GL-X750
Luochongjun
luochongjun at gl-inet.com
Sun Nov 4 21:03:05 EST 2018
this patch adds supports for GL-X750.
Specification:
- SOC: QCA9531 (650MHz)
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR2
- Ethernet: 10/100: 1xLAN + 10/100: 1xWAN
- Wireless: 2.4GHz (bgn) and 5GHz (ac)
- USB: 1x USB 2.0 port
- Button: 1x reset button
- LED: 5x LEDS (green)
Flash instruction:
The original firmware is openwrt, so both LuCI or sysupgrade can be used.
Signed-off-by: Luo chongjun <luochongjun at gl-inet.com>
---
target/linux/ath79/base-files/etc/board.d/01_leds | 3 +
.../linux/ath79/base-files/etc/board.d/02_network | 1 +
.../etc/hotplug.d/firmware/11-ath10k-caldata | 4 +
target/linux/ath79/dts/qca9533_glinet_x750.dts | 46 +++++++++++
target/linux/ath79/dts/qca9533_glinet_x750.dtsi | 95 ++++++++++++++++++++++
target/linux/ath79/image/generic.mk | 8 ++
6 files changed, 157 insertions(+)
create mode 100644 target/linux/ath79/dts/qca9533_glinet_x750.dts
create mode 100644 target/linux/ath79/dts/qca9533_glinet_x750.dtsi
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index f04eb7f..62584e2 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -33,6 +33,9 @@ etactica,eg200)
ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33"
ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore"
;;
+glinet,x750)
+ ucidef_set_led_netdev "wan" "WAN" "gl-x750:green:wan" "eth0"
+ ;;
netgear,wnr612-v2|\
on,n150r)
ucidef_set_led_netdev "wan" "WAN" "netgear:green:wan" "eth0"
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 56eb42f..c18558e 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -69,6 +69,7 @@ ath79_setup_interfaces()
ucidef_set_interface_lan "eth0" "dhcp"
;;
glinet,ar150|\
+ glinet,x750|\
glinet,ar300m)
ucidef_set_interfaces_lan_wan "eth1" "eth0"
;;
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 9365d67..dbd64af 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -87,6 +87,10 @@ board=$(board_name)
case "$FIRMWARE" in
"ath10k/cal-pci-0000:00:00.0.bin")
case $board in
+ glinet,x750)
+ ath10kcal_extract "art" 20480 2116
+ ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1)
+ ;;
iodata,wn-ac1167dgr|\
iodata,wn-ac1600dgr2)
ath10kcal_extract "art" 20480 2116
diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dts b/target/linux/ath79/dts/qca9533_glinet_x750.dts
new file mode 100644
index 0000000..7313f96
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_glinet_x750.dts
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca9533_glinet_x750.dtsi"
+
+&spi {
+ status = "okay";
+ num-cs = <0>;
+
+ flash at 0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <25000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition at 0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition at 40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x010000>;
+ };
+
+ art: partition at 50000 {
+ label = "art";
+ reg = <0x050000 0x010000>;
+ };
+
+ partition at 60000 {
+ label = "firmware";
+ reg = <0x060000 0xfa0000>;
+ };
+
+ };
+ };
+};
diff --git a/target/linux/ath79/dts/qca9533_glinet_x750.dtsi b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi
new file mode 100644
index 0000000..b84c332
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_glinet_x750.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9533.dtsi"
+
+/ {
+ compatible = "glinet,x750", "qca,qca9533";
+ model = "GL.iNet GL-X750";
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&jtag_disable_pins>;
+
+ button0 {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
+ };
+
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "gl-x750:green:power";
+ gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+
+ wlan2g {
+ label = "gl-x750:green:wlan2g";
+ gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ wlan5g {
+ label = "gl-x750:green:wlan5g";
+ gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ wan {
+ label = "gl-x750:green:wan";
+ gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ 4g {
+ label = "gl-x750:green:4g";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ default-state = "off";
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ hub_port: port at 1 {
+ reg = <1>;
+ #trigger-source-cells = <0>;
+ };
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+ð0 {
+ status = "okay";
+ mtd-mac-address = <&art 0x0>;
+ phy-handle = <&swphy4>;
+};
+
+ð1 {
+ mtd-mac-address = <&art 0x6>;
+};
+
+&wmac {
+ status = "okay";
+ mtd-cal-data = <&art 0x1000>;
+ mtd-mac-address = <&art 0x1002>;
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 75e9399..3dbed22 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -176,6 +176,14 @@ define Device/glinet_ar300m_nor
endef
TARGET_DEVICES += glinet_ar300m_nor
+define Device/glinet_x750
+ ATH_SOC := qca9533
+ DEVICE_TITLE := GL.iNet GL-ARX750
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887
+ IMAGE_SIZE := 16000k
+endef
+TARGET_DEVICES += glinet_x750
+
define Device/iodata_etg3-r
ATH_SOC := ar9342
DEVICE_TITLE := I-O DATA ETG3-R
--
2.7.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list