[OpenWrt-Devel] Upstreaming Board.bin for IPQ40xx

[Clément Péron]

Hi Robert,

Thanks for the info, I have looked at the ipq-wifi but for exemple the
"board-zyxel_nbg6617.bin" and "board-zyxel_wre6606.bin" are already
combined into one board.bin. and they just replace the board-2.bin,
But how are they combined ?

I have seems some example to upstream the BDFs like here :
http://lists.infradead.org/pipermail/ath10k/2018-April/011179.html

But they don't explain how to combine both 2G and 5G together.

Thanks,
Clement

On Fri, 9 Nov 2018 at 15:47, Robert Marko <robimarko at gmail.com> wrote:
>
> You have to use the ipq-wifi package
>
> On Fri, Nov 9, 2018, 15:25 Clément Péron <peron.clem at gmail.com wrote:
>>
>> Hi,
>>
>> I'm using a IPQ40xx board with kernel 4.14 (DK05 variant), I have
>> successfully extract the pre-cal but i'm now stuck at the board-2.bin
>> loading.
>>
>> When booting the ath10k_pci is looking for
>> "bus=ahb,bmi-chip-id=0,bmi-board-id=16" and a
>> "bus=ahb,bmi-chip-id=0,bmi-board-id=27" however these board-id are
>> unknown in the board-2.bin file.
>>
>> Looking at the Qualcomm OpenWRT release there is some board files that
>> are not available in the upstream board-2.bin.
>>
>> Like
>> boardData_1_0_IPQ4019_DK01_2G.bin
>> boardData_1_0_IPQ4019_DK01_5G.bin
>> boardData_1_0_IPQ4019_DK03_2G.bin
>> boardData_1_0_IPQ4019_DK03_5G.bin
>> boardData_1_0_IPQ4019_DK05_2G.bin
>> boardData_1_0_IPQ4019_DK05_5G.bin
>> etc....
>>
>> Is there anyway to force the driver to load one of this file instead
>> of looking for the board-2.bin ?
>>
>> Thanks,
>> Clement
>>
>> _______________________________________________
>> openwrt-devel mailing list
>> openwrt-devel at lists.openwrt.org
>> https://lists.openwrt.org/mailman/listinfo/openwrt-devel

_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/mailman/listinfo/openwrt-devel