March 2016 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Tue Mar 1 00:57:40 EST 2016
Ending: Thu Mar 31 22:02:45 EDT 2016
Messages: 607

• [OpenWrt-Devel] (no subject)   Stijn Segers
• [OpenWrt-Devel] (no subject)   Michael Watson
• [OpenWrt-Devel] (no subject)   francesco.borromini at inventati.org
• [OpenWrt-Devel] (no subject)   Michael Watson
• [OpenWrt-Devel] *****SPAM***** procd warning about respawn   Ted Hess
• [OpenWrt-Devel] /proc/<pid>/stat   W. Michael Petullo
• [OpenWrt-Devel] /proc/<pid>/stat   W. Michael Petullo
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   John Crispin
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Matthias Schiffer
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Mauro Mozzarelli
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   John Crispin
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Bruno Randolf
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   John Crispin
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Phil Armstrong
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Andrew | PolkaSpots Support
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer   Matthias Schiffer
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer - Illegal Instruction while running swish-e on RasspberryPi BCM2708 B/B+/C   smilebef at gmail.com
• [OpenWrt-Devel] 15.05.1 - Chaos Calmer DGND3700v1 fails to boot, 15.05 & trunk work fine.   Phil Armstrong
• [OpenWrt-Devel] [Battlemesh] Request for Feedback - prplwrt Software Support Program - initial draft   Simon Wunderlich
• [OpenWrt-Devel] [Battlemesh] Request for Feedback - prplwrt Software Support Program - initial draft   Saverio Proto
• [OpenWrt-Devel] [Battlemesh] Request for Feedback - prplwrt Software Support Program - initial draft   Simon Wunderlich
• [OpenWrt-Devel] [BUG] kernel crash in br_netfilter   Zefir Kurtisi
• [OpenWrt-Devel] [BUG] kernel crash in br_netfilter   Felix Fietkau
• [OpenWrt-Devel] [CC 15.05] curl: Security update (CVE-2016-0755)   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05] openssl: Security update (9 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [CC 15.05] wolfssl: Security update (2 CVEs)   jow at openwrt.org
• [OpenWrt-Devel] [Job] Job offer in Berlin: fulltime upstream contributor.   Arvid E. Picciani
• [OpenWrt-Devel] [musl] regex issue / asterisk / musl / sed   Bastian Bittorf
• [OpenWrt-Devel] [OpenWrt] [PATCH] zynq: Remove rdinit patch   Jason Wu
• [OpenWrt-Devel] [PATCH 0/2] brcm2708: Add WiFi support for Raspberry Pi 3   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 0/2] Netgear WNR1000v2: improved support   Michal
• [OpenWrt-Devel] [PATCH 0/2] Netgear WNR2200: improved support   Michal
• [OpenWrt-Devel] [PATCH 0/2] Support for Netgear R7500v2   Alexis Green
• [OpenWrt-Devel] [PATCH 0/3] ar71xx: fix imagenames for some TPlink units   Sven Roederer
• [OpenWrt-Devel] [PATCH 0/3] ar71xx: fix imagenames for some TPlink units   John Crispin
• [OpenWrt-Devel] [PATCH 0/4] Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 0/4] Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 0/4] Add Raspberry Pi 3 support   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH 0/6] ramips: Add support for JCG JHR-N805R, JHR-N825R and JHR-N926R   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 0/7] kirkwood 4.4   Alexander Couzens
• [OpenWrt-Devel] [PATCH 0/7] kirkwood 4.4   Martin Mueller
• [OpenWrt-Devel] [PATCH 0/8] [ipq806x] Add basic support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 0/8] mpc85xx: Introduce MEN NM50 device support   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: Add QCA955X GPIO mux and function definitions   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: WNR1000v2: fix for random WLAN MAC   Michal
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: WNR2200: fix for random WLAN MAC   Michal
• [OpenWrt-Devel] [PATCH 1/2] ar71xx: WPN824N: set WLAN LED name   Hartmut Knaack
• [OpenWrt-Devel] [PATCH 1/2] base-files: add function ucidef_set_interface_raw to enable default configuration on interfaces other than lan and wan.   Micke Prag
• [OpenWrt-Devel] [PATCH 1/2] brcm2708: update patches to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/2] brcmfmac43430-firmware: add new package   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/2] dnsmasq: Fix dhcp option parsing   Hans Dedecker
• [OpenWrt-Devel] [PATCH 1/2] dnsmasq: Fix dhcp option parsing   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 1/2] dnsmasq: Fix dhcp option parsing   Hans Dedecker
• [OpenWrt-Devel] [PATCH 1/2] ipq806x: Add support for Netgear R7500v2   Alexis Green
• [OpenWrt-Devel] [PATCH 1/2] om-watchdog: Stop om-watchdog via procd before rebooting   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/2] toolchain/gdb: Update to 7.11   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/2] toolchain/gdb: Update to 7.11   Hannu Nyman
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Jakub Jančo
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Bruno Randolf
• [OpenWrt-Devel] [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   John Crispin
• [OpenWrt-Devel] [PATCH 1/2 for netifd] wireless: set different default ciphers for AP and STA   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/3][RFC] ramips: fix esw to set more predictable stat after init   Сергей Василюгин
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: add WLAN LED for WNR2200   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: check both HWID and HWREV on upgrades of TP-LINK devices   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 1/3] include/image.mk: allow including U-Boot environment in UBI   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/3] IP Virtual Server - Load Balancer   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] ramips: Add support for GL-MT300A   alzhao
• [OpenWrt-Devel] [PATCH 1/3] ramips: Add support for GL-MT300A   John Crispin
• [OpenWrt-Devel] [PATCH 1/4] ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR900   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/4] include: add Cortex-A53 CPU_TYPE   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 1/4] wireless: remove cisco airo   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/5] [package] iptables: Disable IPv6 support   Ronaldo Afonso
• [OpenWrt-Devel] [PATCH 1/5] [package] iptables: Disable IPv6 support   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH 1/5] ar71xx: Extend the list of bits in QCA955X_GMAC_REG_ETH_CFG   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/5] kirkwood: add feature devicetree   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/6] ramips: Add a tool to create JCG factory images   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 1/6] ramips: Add a tool to create JCG factory images   John Crispin
• [OpenWrt-Devel] [PATCH 1/6] ramips: Add a tool to create JCG factory images   John Crispin
• [OpenWrt-Devel] [PATCH 1/7] linux/kirkwood: migrate goflexhome/goflexnet to new ubi style   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/8] mpc85xx: add NM50 support to mpc85xx platform   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 1/8] uboot-envtools: add support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 1/8] uboot-envtools: add support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 1/8] uboot-envtools: add support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: Add support for ath79_gpio_function_* on QCA955X   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: add support for the Telldus TellStick ZNet Lite   Micke Prag
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: WNR1000v2: enable control of all LEDs and buttons   Michal
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: WNR1000v2: enable control of all LEDs and buttons   Hartmut Knaack
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: WNR2200: enable control of all LEDs and buttons   Michal
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: WPN824N: enable buttons   Hartmut Knaack
• [OpenWrt-Devel] [PATCH 2/2] brcm2708: add brcmfmac43430-firmware-sdio for Rasberry Pi 3   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcmfmac: Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcmfmac: Add Raspberry Pi 3 support   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 2/2] brcmfmac: Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/2] brcmfmac: Add Raspberry Pi 3 support   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 2/2] dnsmasq: Add enable parameter in the UCI DHCP host section   Hans Dedecker
• [OpenWrt-Devel] [PATCH 2/2] mac80211: Ignore otp error if cal file is found - required for some QCA9980 devices   Alexis Green
• [OpenWrt-Devel] [PATCH 2/2] om-watchdog: Move each board name to its own line   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/2] package/devel/gdb: Update to 7.11   Hannu Nyman
• [OpenWrt-Devel] [PATCH 2/3][RFC] ramips: fix gsw to set more predictable stat after init   Сергей Василюгин
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: add WNR2200 16M version   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: add WNR2200 16M version   John Crispin
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: avoid AR71XX_MODEL ending with a space on some TP-LINK-like devices   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 2/3] oxnas: add Default profile and reorganize device profiles   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/3] ramips: Add support for GL-MT300N   alzhao
• [OpenWrt-Devel] [PATCH 2/4] ar71xx: Use private version of ath79_setup_qca955x_eth_cfg for MR1750   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/4] brcm2708-gpu-fw: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 2/4] mac80211: add cisco airo   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/5] ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi images   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/6] ramips: Add device tree for JCG JHR-N805R   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 2/7] kirkwood/goflexhome/goflexnet: merge "root" and unused mtd partitions into one volume "ubi"   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/8] bootargs: Add mangled bootargs for ATAG to DTB   Adrian Panella
• [OpenWrt-Devel] [PATCH 2/8] mpc85xx: add target NM50 to kernel config   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 3/3][RFC] ramips: simplification of preinit iface   Сергей Василюгин
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: add WNR2200 HW_ID   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: fix the revision of a few TP-LINK devices in AR71XX_MODEL to match labels/image names   Matthias Schiffer
• [OpenWrt-Devel] [PATCH 3/3] oxnas: switch to new image generation template   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/3] ramips: Add support for GL-MT750   alzhao
• [OpenWrt-Devel] [PATCH 3/4] brcm2708: update linux 4.4 patches to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 3/4] Revert "ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x"   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 3/4] wireless: add vendor dirs   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 3/5] ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x   John Crispin
• [OpenWrt-Devel] [PATCH 3/5] kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) images   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/6] ramips: Add device tree for JCG JHR-N825R   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 3/7] kirkwood/goflexnet/goflexhome: change mtd layout to use the last 3 mb   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/8] ath10k: ignore otp check   Adrian Panella
• [OpenWrt-Devel] [PATCH 3/8] mpc85xx: add device tree for NM50   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 4/4] brcm2708: add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH 4/4] Revert "ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg"   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 4/4] wireless: remove rtl8188eu (staging)   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 4/5] ar71xx: Use PHY fixups for Open Mesh MR900   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 4/5] kirkwood/dockstar: rename partition into ubi to use auto detection of target mtd   Alexander Couzens
• [OpenWrt-Devel] [PATCH 4/6] ramips: Add device tree for JCG JHR-N926R   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 4/7] uboot-kirkwood/goflexhome: update bootargs to use new ubi style   Alexander Couzens
• [OpenWrt-Devel] [PATCH 4/8] caldata-utils: new package to manipulate ath10k   Adrian Panella
• [OpenWrt-Devel] [PATCH 4/8] mpc85xx: add firmware upgrade support for NM50   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 5/5] ar71xx: Use PHY fixups for Open Mesh MR1750   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 5/5] uboot/kirkwood: correct mtdparts + cmdline for new ubifs on dockstar   Alexander Couzens
• [OpenWrt-Devel] [PATCH 5/6] ramips: Add JCG routers to base-files   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 5/7] uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"   Alexander Couzens
• [OpenWrt-Devel] [PATCH 5/7] uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"   Daniel Golle
• [OpenWrt-Devel] [PATCH 5/7] uboot-kirkwood/goflexhome: add forgotten include openwrt-kirkwood-common.h"   Alexander Couzens
• [OpenWrt-Devel] [PATCH 5/8] mpc85xx: add 32Mppc flash layout in mktplinkfw for NM50   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 5/8] Profile: add Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 6/6] ramips: Add profiles for JCG routers   reinhard at m4x.de
• [OpenWrt-Devel] [PATCH 6/7] uboot-kirkwood/goflexhome: explicit define the size of the last partition   Alexander Couzens
• [OpenWrt-Devel] [PATCH 6/8] DTS: Add EA8500 device tree   Adrian Panella
• [OpenWrt-Devel] [PATCH 6/8] mpc85xx: increase timeout for NM50 fw-upgrade via luci   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 7/7] kirkwood: switch to kernel 4.4   Alexander Couzens
• [OpenWrt-Devel] [PATCH 7/8] Firmware Image: add configuration for EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 7/8] mpc85xx: support NM50 in mpc85xx_board_detect   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 8/8] base-files: add basic support for Linksys EA8500   Adrian Panella
• [OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)   Dieter Pfeuffer
• [OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)   Michael Heimpold
• [OpenWrt-Devel] [PATCH 8/8] mpc85xx: add NM50 config for fw_(printenv/setenv)   Pfeuffer, Dieter
• [OpenWrt-Devel] [PATCH] [ar71xx] [CC] change some TP-link modelnames (WR841, WA701, WA730)   Sven Roederer
• [OpenWrt-Devel] [PATCH] [ar71xx] [CC] change some TP-link modelnames (WR841, WA701, WA730)   John Crispin
• [OpenWrt-Devel] [PATCH] [ar71xx] mach-arduino-yun.c : Arduino Yun board 'WLAN RST' button support   Hirokazu MORIKAWA
• [OpenWrt-Devel] [PATCH] [ar71xx] mach-arduino-yun.c : Arduino Yun board 'WLAN RST' button support   John Crispin
• [OpenWrt-Devel] [PATCH] [include] Support postinst on old OS   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [packages] opkg: Fix handling of sha256sums for conffiles   Michal Hrusecky
• [OpenWrt-Devel] [PATCH] [ramips] Adjust image size limit for the D-Link DIR-860L B1   Daniel Engberg
• [OpenWrt-Devel] [PATCH] [RFC] generic: Move NU801 LED driver to generic   Chris Blake
• [OpenWrt-Devel] [PATCH] [RFC] generic: Move NU801 LED driver to generic   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [RFC] generic: Move NU801 LED driver to generic   Chris Blake
• [OpenWrt-Devel] [PATCH] [RFC] generic: Move NU801 LED driver to generic   Chris Blake
• [OpenWrt-Devel] [PATCH] Add option to read an alternative config file   Toan Pham
• [OpenWrt-Devel] [PATCH] Add option to read an alternative config file   Toan Pham
• [OpenWrt-Devel] [PATCH] ar71x: Added support for TP-Link TL-WR841N v11 to 15.05   Stijn Segers
• [OpenWrt-Devel] [PATCH] ar71xx: Add preliminary TL-WR841N/ND v11 support   Stijn Segers
• [OpenWrt-Devel] [PATCH] ar71xx: add support for Compex WPJ342   Christian Mehlis
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for the OMYlink OMY-X1   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for the OMYlink OMY-X1   Karl Palsson
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the Telldus TellStick ZNet Lite   micke.prag at telldus.se
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the Telldus TellStick ZNet Lite   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ar71xx: Add TL-WR841N/ND v11 support   Stijn Segers
• [OpenWrt-Devel] [PATCH] ar71xx: Arduino Yun board 'WLAN RST' button support   Hirokazu MORIKAWA
• [OpenWrt-Devel] [PATCH] ar71xx: fix qca956x ethernet initialization   Weijie Gao
• [OpenWrt-Devel] [PATCH] ar71xx: fix qca956x ethernet initialization   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: fix qca956x ge0 speed   Weijie Gao
• [OpenWrt-Devel] [PATCH] base-files: add function ucidef_set_interface_raw   John Crispin
• [OpenWrt-Devel] [PATCH] base-files: fix __network_ifstatus with lots of interfaces   Helmut Schaa
• [OpenWrt-Devel] [PATCH] brcm63xx: fix Livebox1 support   dani
• [OpenWrt-Devel] [PATCH] brcm63xx: implement gpio to irq   dani
• [OpenWrt-Devel] [PATCH] brcm63xx: Let the CFE partition in HG556a to be writeable   dani
• [OpenWrt-Devel] [PATCH] brcmfmac: Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcmfmac: Add Raspberry Pi 3 support   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] brcmfmac: Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] busybox: update to 1.24.2   Magnus Kroken
• [OpenWrt-Devel] [PATCH] CC: include/version.mk: Adjust to 15.05.1 release   Hannu Nyman
• [OpenWrt-Devel] [PATCH] CC: toolchain: use latest glibc 2.21 revision   Naresh Kumar Mehta
• [OpenWrt-Devel] [PATCH] CC: toolchain: use latest glibc 2.21 revision   Michael Marley
• [OpenWrt-Devel] [PATCH] CC: toolchain: use latest glibc 2.21 revision   John Crispin
• [OpenWrt-Devel] [PATCH] CC: toolchain: use latest glibc 2.21 revision   Michael Marley
• [OpenWrt-Devel] [PATCH] CC: toolchain: use latest glibc 2.21 revision   Naresh Kumar Mehta
• [OpenWrt-Devel] [PATCH] kernel: add missing symbol   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: gpio-button-hotplug: Add missing ONESHOT flag to threaded IRQ request   Petr Štetiar
• [OpenWrt-Devel] [PATCH] lantiq: use upstream mechanism to append device tree file   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] lantiq: use upstream mechanism to append device tree file   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: use upstream mechanism to append device tree file   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] lantiq: use upstream mechanism to append device tree file   John Crispin
• [OpenWrt-Devel] [PATCH] libnl-tiny: backport 'gnet_stats_rate_est64' support   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] lua: host: install lnum_config.h   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] mac80211: build airo on x86 only   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Paul Fertser
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Paul Fertser
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] mac80211: install old firmware for ath9k-htc on target as well   Alexey Brodkin
• [OpenWrt-Devel] [PATCH] mm-macros: update to 0.9.10   Hannu Nyman
• [OpenWrt-Devel] [PATCH] modules/sound: enable ALSA PCM timer and procfs interface   Daniel Golle
• [OpenWrt-Devel] [PATCH] modules/sound: enable ALSA PCM timer and procfs interface   John Crispin
• [OpenWrt-Devel] [PATCH] mtd: fix reading of image magic bytes in smaller chunks   Sven Eckelmann
• [OpenWrt-Devel] [PATCH] netifd: Send DHCP release when client exits   Hans Dedecker
• [OpenWrt-Devel] [PATCH] odhcp6c : Silence mtu write error warnings   Hans Dedecker
• [OpenWrt-Devel] [PATCH] openvpn: add support for X.509 name options   Jeffery To
• [OpenWrt-Devel] [PATCH] oxnas: add spinlock in pinctrl driver   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: also reset GPIO B registers on boot   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: clean-up NAND driver to fix probing issue   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: complete NAND driver clean-up   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: set ubifs parameters for Default profile   Daniel Golle
• [OpenWrt-Devel] [PATCH] oxnas: sync cpu-hotplug with mach-realview   Daniel Golle
• [OpenWrt-Devel] [PATCH] package/libs/libusb: Update to 1.0.20   Daniel Engberg
• [OpenWrt-Devel] [PATCH] package/libs/lzo: update version to 2.09   Daniel Engberg
• [OpenWrt-Devel] [PATCH] package/utils/usbutils: Update USB IDs list to snapshot 2015-12-17   Daniel Engberg
• [OpenWrt-Devel] [PATCH] package:boot:uboot-zynq: Update to U-Boot 2016.03 release   Jason Wu
• [OpenWrt-Devel] [PATCH] pkg-config: Update to 0.29.1   Hannu Nyman
• [OpenWrt-Devel] [PATCH] prereq: fixes checks that prefix env vars (ex:git)   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] prereq: fixes checks that prefix env vars (ex:git)   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH] prereq: fixes checks that prefix env vars (ex:git)   Felix Fietkau
• [OpenWrt-Devel] [PATCH] procd: support pidfile writing.   Karl Palsson
• [OpenWrt-Devel] [PATCH] ramips: add support for Planex MZK-WDPR.   YuheiOKAWA
• [OpenWrt-Devel] [PATCH] ramips: Add support for the Netgear WNDR3700v5   L. D. Pinney
• [OpenWrt-Devel] [PATCH] ramips: Add support for Xiaomi MiWiFi Nano   Noble Pepper
• [OpenWrt-Devel] [PATCH] ramips: Add support for Xiaomi MiWiFi Nano   Karl Palsson
• [OpenWrt-Devel] [PATCH] ramips: Add support for Xiaomi MiWiFi Nano   Noble Pepper
• [OpenWrt-Devel] [PATCH] ramips: Add support for ZBT WG3526   Kristian Evensen
• [OpenWrt-Devel] [PATCH] Ramips: Enable wmac for WRTnode2 series   xzmu
• [OpenWrt-Devel] [PATCH] Ramips: Enable wmac for WRTnode2 series   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: EX2700: remove unused kernel modules   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: Incorrect file mode change   Kristian Evensen
• [OpenWrt-Devel] [PATCH] ramips: Incorrect file mode change   John Crispin
• [OpenWrt-Devel] [PATCH] ramips:MiWifi-Nano-change gpios to leds, add to default build group   Noble Pepper
• [OpenWrt-Devel] [PATCH] ramips:MiWifi-Nano-change gpios to leds, add to default build group   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: move different subtarget image generation to separate makefiles to improve maintainability   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] ramips: mt7620: fix failsafe switch config   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH] ramips: mt7620: fix failsafe switch config   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: rt3352 usbphy fix in dts-file   serge
• [OpenWrt-Devel] [PATCH] ramips: rt3352 usbphy fix in dts-file   Сергей Василюгин
• [OpenWrt-Devel] [PATCH] service: Support writing pidfiles   Karl Palsson
• [OpenWrt-Devel] [PATCH] service: Support writing pidfiles   John Crispin
• [OpenWrt-Devel] [PATCH] service: Support writing pidfiles   Yousong Zhou
• [OpenWrt-Devel] [PATCH] sunxi: add basic support for OrangePi Mini v1 (AllWinner A20)   Antonio Quartulli
• [OpenWrt-Devel] [PATCH] sunxi: add basic support for OrangePi Mini v1 (AllWinner A20)   Zoltan HERPAI
• [OpenWrt-Devel] [PATCH] sunxi: add basic support for OrangePi Mini v1 (AllWinner A20)   Antonio Quartulli
• [OpenWrt-Devel] [PATCH] support for ext4fs overlay   Ram Chandra Jangir
• [OpenWrt-Devel] [PATCH] support for ext4fs overlay   John Crispin
• [OpenWrt-Devel] [PATCH] target/mpc85xx: check for 'generic' subtarget for initramfs image file   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] toolchain/kernel-headers: use target config when generating headers   Karl Vogel
• [OpenWrt-Devel] [PATCH] tools/cmake: fix compile on Alpine Linux   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] tools/cmake: fix compile on Alpine Linux   John Crispin
• [OpenWrt-Devel] [PATCH] tools/cmake: fix compile on Alpine Linux   John Crispin
• [OpenWrt-Devel] [PATCH] tools/findutils: Update to 4.6.0   Hannu Nyman
• [OpenWrt-Devel] [PATCH] tools/flex: update to 2.6.1   Hannu Nyman
• [OpenWrt-Devel] [PATCH] tools/flock: fix compile on Alpine Linux   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] x86: fix platform_export_bootpart() for Xen virtual disks   Alexander Dahl
• [OpenWrt-Devel] [PATCH] zynq:image: Simplify boot-img build   Jason Wu
• [OpenWrt-Devel] [PATCH] zynq: Re-implement mkits.sh and use it   Jason Wu
• [OpenWrt-Devel] [PATCH] zynq: Re-implement mkits.sh and use it   Jason Wu
• [OpenWrt-Devel] [PATCH CC 25/32] ar71xx: compex wpj531 fix setting mac address on ethernet   Andrew | PolkaSpots Support
• [OpenWrt-Devel] [PATCH CC 25/32] ar71xx: compex wpj531 fix setting mac address on ethernet   Matthias Schiffer
• [OpenWrt-Devel] [PATCH netifd] add support for setting send_redirects   Daniel Golle
• [OpenWrt-Devel] [PATCH netifd] add support for setting send_redirects   Daniel Golle
• [OpenWrt-Devel] [PATCH netifd] alias : Fix interface aliased on top of a static interface not getting active   Hans Dedecker
• [OpenWrt-Devel] [PATCH netifd] alias : Fix interface aliased on top of a static interface not getting active   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH netifd] bridge: multicast: Export some parameters RFCs suggest to be tunable   Linus Lüssing
• [OpenWrt-Devel] [PATCH netifd] device: Support setting autoneg, speed and duplex   ben at benjii.net
• [OpenWrt-Devel] [PATCH RFC] brcm47xx: image: create common TRX images using new building system   Rafał Miłecki
• [OpenWrt-Devel] [PATCH ubus] cmake: Add ubox, blobmsg_json libraries and include dirs lookup   Petr Štetiar
• [OpenWrt-Devel] [PATCH uci] cmake: Add ubox library and include dir lookup   Petr Štetiar
• [OpenWrt-Devel] [PATCH v2 0/3] ar71xx: migrate cpe510 to new build steps   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 1/2] ipvsadm   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v2 1/3] ar71xx/image: introduce LOADER_TYPE to support elf loaders   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 1/3] ar71xx/image: introduce LOADER_TYPE to support elf loaders   John Crispin
• [OpenWrt-Devel] [PATCH v2 1/3] ar71xx/image: introduce LOADER_TYPE to support elf loaders   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 1/3] ar71xx/image: introduce LOADER_TYPE to support elf loaders   John Crispin
• [OpenWrt-Devel] [PATCH v2 1/3] ar71xx/image: introduce LOADER_TYPE to support elf loaders   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 2/2] ar71xx: WNR1000v2: enable control of all LEDs and buttons   Michal
• [OpenWrt-Devel] [PATCH v2 2/2] ipvsadm: OpenWrt configuration   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v2 2/2] wpa_supplicant: enforce cipher in client mode   Daniel Golle
• [OpenWrt-Devel] [PATCH v2 2/3] ar71xx/image: allow builds of loader without cmdline injecting   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 2/3] ar71xx/image: allow builds of loader without cmdline injecting   John Crispin
• [OpenWrt-Devel] [PATCH v2 2/3] ar71xx/image: allow builds of loader without cmdline injecting   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2 2/3] ar71xx/image: allow builds of loader without cmdline injecting   John Crispin
• [OpenWrt-Devel] [PATCH v2 3/3] ar71xx: migrate tplink cpe510 to new build steps   Alexander Couzens
• [OpenWrt-Devel] [PATCH v2] [CC] [backport] ar71xx: change some TP-link modelnames (WR841, WA701, WA730)   Sven Roederer
• [OpenWrt-Devel] [PATCH v2] [CC] [backport] ar71xx: change some TP-link modelnames (WR841, WA701, WA730)   Sven Roederer
• [OpenWrt-Devel] [PATCH v2] [CC] [backport] ar71xx: change some TP-link modelnames (WR841, WA701, WA730)   John Crispin
• [OpenWrt-Devel] [PATCH v2] ar71xx: Add OOLITE to the Gainstrong profile, removed standalone profile.   John Crispin
• [OpenWrt-Devel] [PATCH v2] ar71xx: Add support for the OMYlink OMY-X1   L. D. Pinney
• [OpenWrt-Devel] [PATCH v2] ar71xx: Add support for the OMYlink OMY-X1   John Crispin
• [OpenWrt-Devel] [PATCH v2] ar71xx: fix qca956x ethernet initialization   Weijie Gao
• [OpenWrt-Devel] [PATCHv2] base-files: add function ucidef_set_interface_raw   micke.prag at telldus.se
• [OpenWrt-Devel] [PATCHv2] base-files: add function ucidef_set_interface_raw   John Crispin
• [OpenWrt-Devel] [PATCHv2] base-files: add function ucidef_set_interface_raw   Felix Fietkau
• [OpenWrt-Devel] [PATCH v2] CC: version.mk and image-config.in: adjust to 15.05.1   Hannu Nyman
• [OpenWrt-Devel] [PATCH v2] fstools: support for ext4fs overlay   Ram Chandra Jangir
• [OpenWrt-Devel] [PATCH v2] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCHv2] procd: service: Support writing pidfiles   Karl Palsson
• [OpenWrt-Devel] [PATCH v2] ramips: Add a tool to create JCG factory images   Reinhard Max
• [OpenWrt-Devel] [PATCH v2] ramips: Add support for Xiaomi MiWiFi Nano   Noble Pepper
• [OpenWrt-Devel] [PATCH v2] ramips: Add support for ZBT WG3526   Kristian Evensen
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   John Crispin
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   John Crispin
• [OpenWrt-Devel] [PATCH v2] ramips: EX2700: remove unused kernel modules   Joseph C. Lehner
• [OpenWrt-Devel] [PATCH v2] ramips:MiWifi-Nano-change gpios to leds, add to default build group   Noble Pepper
• [OpenWrt-Devel] [PATCH v2] ramips:MiWifi-Nano-change gpios to leds, add to default build group   John Crispin
• [OpenWrt-Devel] [PATCH v3 00/11] Lantiq dsl improvements   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 01/11] dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patches   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 01/11] dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patches   John Crispin
• [OpenWrt-Devel] [PATCH v3 01/11] dsl-vrx200-firmware-xdsl: create Lantiq vrx200 firmware patches   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH v3 02/11] ltq-vdsl-app: load the vrx200 firmware or patch it   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 03/11] lantiq: do not set default firmware file   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 04/11] lantiq: add dsl firmware to default packages   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 05/11] ltq-vdsl-app: make the dsl_control application stop cleanly   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 06/11] base-files: change type of adsl and vdsl to dsl only   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 07/11] ltq-adsl-app: sync annex option between from VDSL package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 08/11] ltq-vdsl-app: sync annex option between from ADSL package   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 09/11] ltq-vdsl-app: make it possible to configure ADSL/VDSL independently   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 1/2] ipvsadm: ipvs administration tool   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v3 10/11] ltq-vdsl-app: do not set the reserved bit 4 in the xTSE 8   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 11/11] lantiq: print profile name in dsl lucistat   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH v3 2/2] ipvsadm: uci configuration, init, scheduler   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v3] ar71xx: Add support for the OMYlink OMY-X1   L. D. Pinney
• [OpenWrt-Devel] [PATCH v3] brcmfmac: Add Raspberry Pi 3 support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v3] brcmfmac: Add Raspberry Pi 3 support   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   John Crispin
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   John Crispin
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   John Crispin
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH v3] ipvs: Linux IP Virtual Server kernel modules (netfilter.mk patch)   Mauro Mozzarelli
• [OpenWrt-Devel] [PATCH v3] ramips: Add support for Xiaomi MiWiFi Nano   Noble Pepper
• [OpenWrt-Devel] [PATCH v3] ramips: Add support for Xiaomi MiWiFi Nano   Reinhard Max
• [OpenWrt-Devel] [PATCH v3] ramips: Add support for Xiaomi MiWiFi Nano   John Crispin
• [OpenWrt-Devel] [PATCH v3] ramips: Add support for Xiaomi MiWiFi Nano   Noble Pepper
• [OpenWrt-Devel] [PATCH v3] ramips: MiWifi-Nano - change gpios to leds, add to default build group   Noble Pepper
• [OpenWrt-Devel] [PATCH v4 3/8] mac80211: ath9k: show platform MAC address in kernel log if set   Felix Fietkau
• [OpenWrt-Devel] [PATCH v4 5/8] mac80211: ath9k: enable GPIO buttons   Felix Fietkau
• [OpenWrt-Devel] [PATCH v6 5/8] mac80211: ath9k: enable GPIO buttons   Michal
• [OpenWrt-Devel] [RFC 0/2] Add support for a apm821xx target & the Cisco Meraki MR24   Chris Blake
• [OpenWrt-Devel] [RFC 0/3] add Cisco Z1 support   Christian Lamparter
• [OpenWrt-Devel] [RFC 0/4] Add support for Raspberry Pi 3   John Crispin
• [OpenWrt-Devel] [RFC 0/4] Add support for Raspberry Pi 3   Florian Fainelli
• [OpenWrt-Devel] [RFC 0/4] Add support for Raspberry Pi 3   John Crispin
• [OpenWrt-Devel] [RFC 1/2] Add support for the apm821xx Device Target   Chris Blake
• [OpenWrt-Devel] [RFC 1/3] firmware-utils mkmerakifw: firmware generator for Z1   Christian Lamparter
• [OpenWrt-Devel] [RFC 1/3] firmware-utils mkmerakifw: firmware generator for Z1   John Crispin
• [OpenWrt-Devel] [RFC 2/2] Add support for the Meraki MR24   Chris Blake
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Christian Lamparter
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   John Crispin
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Martin Blumenstingl
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Christian Lamparter
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Martin Blumenstingl
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Christian Lamparter
• [OpenWrt-Devel] [RFC 2/3] kernel: owl-loader for delayed Atheros ath9k fixup   Martin Blumenstingl
• [OpenWrt-Devel] [RFC 3/3] ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway   Christian Lamparter
• [OpenWrt-Devel] [RFC 3/3] ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway   John Crispin
• [OpenWrt-Devel] [RFC] fstools/overlayfs race condition   Roman Yeryomin
• [OpenWrt-Devel] [RFC] fstools/overlayfs race condition   John Crispin
• [OpenWrt-Devel] [RFC] fstools/overlayfs race condition   Roman Yeryomin
• [OpenWrt-Devel] [RFC] fstools/overlayfs race condition   John Crispin
• [OpenWrt-Devel] [RFC] fstools/overlayfs race condition   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [RFC] fstools/overlayfs race condition   John Crispin
• [OpenWrt-Devel] [RFC] ramips: Add initial support for the Netgear WNDR3700v5   L. D. Pinney
• [OpenWrt-Devel] [RFC] ramips: Add initial support for the Netgear WNDR3700v5   John Crispin
• [OpenWrt-Devel] [RFC] ramips: Add initial support for the Netgear WNDR3700v5   L. D. Pinney
• [OpenWrt-Devel] [RFC] ramips: Add initial support for the Netgear WNDR3700v5   John Crispin
• [OpenWrt-Devel] [RFC]ramips: fix embedded switch init   John Crispin
• [OpenWrt-Devel] [RFC PATCH 00/10] make symlink /var to /tmp optional   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 01/10] base-files: create /tmp/etc on boot   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 02/10] dnsmasq: generate config in /tmp/etc   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 03/10] igmpproxy: generate config in /tmp/etc   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 04/10] igmpproxy: /tmp/etc is created in /etc/init.d/boot   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 05/10] openvpn: generate config in /tmp/etc   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 06/10] openvpn: /tmp/etc is created in /etc/init.d/boot   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 07/10] openvpn: /var/run is created in /etc/init.d/boot   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 08/10] samba36: generate config in /tmp/etc   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 09/10] samba36: /tmp/etc is created in /etc/init.d/boot   Stijn Tintel
• [OpenWrt-Devel] [RFC PATCH 10/10] base-files: add option to symlink /var to /tmp   Stijn Tintel
• [OpenWrt-Devel] about .chk firmware   Hauke Mehrtens
• [OpenWrt-Devel] alfa-ap120c ordering and indenting   John Crispin
• [OpenWrt-Devel] alfa-ap120c ordering and indenting   Luka Perkov
• [OpenWrt-Devel] ARMv4 (not v4t) marked obsolete in gcc-6   Hans Ulli Kroll
• [OpenWrt-Devel] ARMv4 (not v4t) marked obsolete in gcc-6   John Crispin
• [OpenWrt-Devel] ARMv4 (not v4t) marked obsolete in gcc-6   Hans Ulli Kroll
• [OpenWrt-Devel] ARMv4 (not v4t) marked obsolete in gcc-6   John Crispin
• [OpenWrt-Devel] BB: openssl: update to 1.0.2g (8 CVEs)   Mohammed Berdai
• [OpenWrt-Devel] Brauche Hilfe   Valent Turkovic
• [OpenWrt-Devel] Brauche Hilfe   Valent Turkovic
• [OpenWrt-Devel] cannot boot current x86 snapshot   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Outback Dingo
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Joseph Marlin
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Matthias Schiffer
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   John Crispin
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Matthias Schiffer
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   John Crispin
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Outback Dingo
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Matthias Schiffer
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Gerry Rozema
• [OpenWrt-Devel] Cannot flash UBNT Loco M2   Valent Turkovic
• [OpenWrt-Devel] Chaos Calmer 15.05.1 brcm63xx/generic missing packages   Álvaro Fernández Rojas
• [OpenWrt-Devel] Chaos Calmer 15.05.1 brcm63xx/generic missing packages   Álvaro Fernández Rojas
• [OpenWrt-Devel] cns3xxx: DMA failed to stop in 10ms immediately following 4.4 kernel bump   Pushpal Sidhu
• [OpenWrt-Devel] current state of kirkwood target in trunk?   Alexander Couzens
• [OpenWrt-Devel] Current State of NCM support   Tristan Collins
• [OpenWrt-Devel] Current State of NCM support   Jakub Jančo
• [OpenWrt-Devel] downloads.openwrt.org   Bill Moffitt
• [OpenWrt-Devel] downloads.openwrt.org   Jo-Philipp Wich
• [OpenWrt-Devel] downloads.openwrt.org   Bill
• [OpenWrt-Devel] Dropbear DSA keys   Torsten Duwe
• [OpenWrt-Devel] Dropbear DSA keys   Alexander Dahl
• [OpenWrt-Devel] fstools: MTD driver - deadc0de marker   Karl Vogel
• [OpenWrt-Devel] Fwd: [PATCH 1/2] wwan: Add support for CDC (Huawei 'HiLink') Modems   Jakub Jančo
• [OpenWrt-Devel] Getting error after upgrading LUCI   nam228
• [OpenWrt-Devel] Git mirror with branches, tags and full history?   Bruno Randolf
• [OpenWrt-Devel] Git mirror with branches, tags and full history?   John Crispin
• [OpenWrt-Devel] Git mirror with branches, tags and full history?   John Crispin
• [OpenWrt-Devel] Git mirror with branches, tags and full history?   Bruno Randolf
• [OpenWrt-Devel] Git mirror with branches, tags and full history?   Sedat Dilek
• [OpenWrt-Devel] Git mirror with branches, tags and full history?   John Crispin
• [OpenWrt-Devel] GSoC 2016 - Application period running   Andreas Bräu
• [OpenWrt-Devel] Heightened sensitivity; a solution   Daniel Dickinson
• [OpenWrt-Devel] Heightened sensitivity; a solution   Alexander Couzens
• [OpenWrt-Devel] Introducing "fastpath" - Kernel module for speeding up IP forwarding   valent.turkovic at gmail.com
• [OpenWrt-Devel] Introducing "fastpath" - Kernel module for speeding up IP forwarding   Weedy
• [OpenWrt-Devel] Linux IP Virtual Server for OpenWrt patches   Mauro Mozzarelli
• [OpenWrt-Devel] Linux IP Virtual Server for OpenWrt patches   Mauro Mozzarelli
• [OpenWrt-Devel] Linux IP Virtual Server for OpenWrt patches   John Crispin
• [OpenWrt-Devel] Linux IP Virtual Server for OpenWrt trunk or github?   Mauro Mozzarelli
• [OpenWrt-Devel] Linux IP Virtual Server for OpenWrt trunk or github?   Felix Fietkau
• [OpenWrt-Devel] Linux IP Virtual Server for OpenWrt trunk or github?   Mauro Mozzarelli
• [OpenWrt-Devel] MAKE_ARGS?   Mauro Mozzarelli
• [OpenWrt-Devel] MAKE_ARGS?   Yousong Zhou
• [OpenWrt-Devel] MAKE_ARGS?   Mauro Mozzarelli
• [OpenWrt-Devel] MAKE_ARGS?   Yousong Zhou
• [OpenWrt-Devel] MAKE_ARGS?   Mauro Mozzarelli
• [OpenWrt-Devel] MAKE_ARGS?   Yousong Zhou
• [OpenWrt-Devel] netfilter.mk: how do I identify which kernel is being built?   Mauro Mozzarelli
• [OpenWrt-Devel] netfilter.mk: how do I identify which kernel is being built?   Mauro Mozzarelli
• [OpenWrt-Devel] NetJSON status at the beginning of 2016   Nemesis
• [OpenWrt-Devel] new build of cc   tapper
• [OpenWrt-Devel] new kernel 4.1.20 / jffs-deadlock fix   Bastian Bittorf
• [OpenWrt-Devel] new kernel 4.1.20 / jffs-deadlock fix   Sedat Dilek
• [OpenWrt-Devel] new kernel 4.1.20 / jffs-deadlock fix   Bastian Bittorf
• [OpenWrt-Devel] new kernel 4.1.20 / jffs-deadlock fix   Bastian Bittorf
• [OpenWrt-Devel] OpenVPN server doesnt send AUTH_FAILED   Jakub Jančo
• [OpenWrt-Devel] OpenWrt at Netdev conference   Catalin Patulea
• [OpenWrt-Devel] OpenWRT port to some BCOM based Wi-Fi Routers   Hauke Mehrtens
• [OpenWrt-Devel] OpenWRT ppc44x target & the APM821XX SoC   Chris Blake
• [OpenWrt-Devel] OpenWRT ppc44x target & the APM821XX SoC   Imre Kaloz
• [OpenWrt-Devel] OpenWRT ppc44x target & the APM821XX SoC   Chris Blake
• [OpenWrt-Devel] OpenWRT ppc44x target & the APM821XX SoC   Imre Kaloz
• [OpenWrt-Devel] OpenWRT ppc44x target & the APM821XX SoC   Chris Blake
• [OpenWrt-Devel] opkg upgrade all   Michal Hrusecky
• [OpenWrt-Devel] opkg upgrade all   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] opkg upgrade all   Michal Hrusecky
• [OpenWrt-Devel] opkg upgrade all   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] opkg upgrade all   Michal Hrusecky
• [OpenWrt-Devel] opkg upgrade all   Daniel Dickinson
• [OpenWrt-Devel] opkg upgrade all   Michal Hrusecky
• [OpenWrt-Devel] Patch for Arduino Yun board WLAN RST"button support (mach-arduino-yun.c)   Hauke Mehrtens
• [OpenWrt-Devel] procd warning about respawn   Ted Hess
• [OpenWrt-Devel] procd warning about respawn   John Crispin
• [OpenWrt-Devel] procd warning about respawn   Helmut Schaa
• [OpenWrt-Devel] procd warning about respawn   John Crispin
• [OpenWrt-Devel] procd warning about respawn   John Crispin
• [OpenWrt-Devel] procd warning about respawn   Helmut Schaa
• [OpenWrt-Devel] Proposal: change buildbot's build failure logic to be less restrictive regarding packages from feeds   Hannu Nyman
• [OpenWrt-Devel] prpl sync 3/31/16   Kathy Giori
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Question regarding call python script   Jo-Philipp Wich
• [OpenWrt-Devel] Question regarding call python script   Alexandru Ardelean
• [OpenWrt-Devel] Question regarding call python script   John Crispin
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Question regarding call python script   John Crispin
• [OpenWrt-Devel] Question regarding call python script   Bastian Bittorf
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Question regarding call python script   Paul Fertser
• [OpenWrt-Devel] Question regarding call python script   John Crispin
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Question regarding call python script   Paul Fertser
• [OpenWrt-Devel] Question regarding call python script   Bastian Bittorf
• [OpenWrt-Devel] Question regarding call python script   Karl Palsson
• [OpenWrt-Devel] Question regarding call python script   John Crispin
• [OpenWrt-Devel] Question regarding call python script   Bastian Bittorf
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Question regarding call python script   Bastian Bittorf
• [OpenWrt-Devel] Question regarding call python script   John Crispin
• [OpenWrt-Devel] Question regarding call python script   Jason Wu
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Hannu Nyman
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Álvaro Fernández Rojas
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Shankar Unni
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Shankar Unni
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Nathan Hintz
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Jo-Philipp Wich
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Bruno Randolf
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Karl Vogel
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Shankar Unni
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Roman Yeryomin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Imre Kaloz
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Roman Yeryomin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Roman Yeryomin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   Imre Kaloz
• [OpenWrt-Devel] Read-only mirror https://github.com/openwrt/openwrt is stuck since 12 days ago   John Crispin
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Eric Schultz
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Saverio Proto
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Eric Schultz
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Felix Fietkau
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Linus Lüssing
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Daniel Golle
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Eric Schultz
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Eric Schultz
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Eric Schultz
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Eric Schultz
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Saverio Proto
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Kathy Giori
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Felix Fietkau
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   xxiao8
• [OpenWrt-Devel] Request for Feedback - prplwrt Software Support Program - initial draft   Kathy Giori
• [OpenWrt-Devel] request for libpng-dev ???   smilebef at gmail.com
• [OpenWrt-Devel] RESEND: Re: [PATCH 0/4] Add Raspberry Pi 3 support   Arend van Spriel
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Laurent GUERBY
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   John Crispin
• [OpenWrt-Devel] rsync mirror of download.openwrt.org ?   Laurent GUERBY
• [OpenWrt-Devel] RT5350 board issues.   Frederic Konrad
• [OpenWrt-Devel] RT5350 board issues.   Frédéric Konrad
• [OpenWrt-Devel] RT5350 board issues.   John Crispin
• [OpenWrt-Devel] RT5350 board issues.   Frédéric Konrad
• [OpenWrt-Devel] RT5350 board issues.   Frédéric Konrad
• [OpenWrt-Devel] Sha256 checksum generation of images: why OpenSSL instead of sha256sum?   Stijn Segers
• [OpenWrt-Devel] Sha256 checksum generation of images: why OpenSSL instead of sha256sum?   Bastian Bittorf
• [OpenWrt-Devel] Sha256 checksum generation of images: why OpenSSL instead of sha256sum?   John Crispin
• [OpenWrt-Devel] Sha256 checksum generation of images: why OpenSSL instead of sha256sum?   francesco.borromini at inventati.org
• [OpenWrt-Devel] Sha256 checksum generation of images: why OpenSSL instead of sha256sum?   Weedy
• [OpenWrt-Devel] Sha256 checksum generation of images: why OpenSSL instead of sha256sum?   Paul Fertser
• [OpenWrt-Devel] stdout and putchar() behavior in musl   Ram Chandra Jangir
• [OpenWrt-Devel] stdout and putchar() behavior in musl   Arjen de Korte
• [OpenWrt-Devel] stdout and putchar() behavior in musl   Alexander Dahl
• [OpenWrt-Devel] stdout and putchar() behavior in musl   Naresh Kumar Mehta
• [OpenWrt-Devel] stdout and putchar() behavior in musl   Ram Chandra Jangir
• [OpenWrt-Devel] SVN server   John Crispin
• [OpenWrt-Devel] SVN server   Shankar Unni
• [OpenWrt-Devel] syn_flood v/s synflood_protect in firewall default config   Naresh Kumar Mehta
• [OpenWrt-Devel] The old days are gone; OpenWrt is a product now   Daniel Dickinson
• [OpenWrt-Devel] The old days are gone; OpenWrt is a product now   Daniel Dickinson
• [OpenWrt-Devel] The old days are gone; OpenWrt is a product now   Chris Green
• [OpenWrt-Devel] USB Hotplug   Baptiste Clenet
• [OpenWrt-Devel] USB Hotplug   alzhao
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   alzhao
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   Baptiste Clenet
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   Baptiste Clenet
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   Baptiste Clenet
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   Baptiste Clenet
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] USB Hotplug   Baptiste Clenet
• [OpenWrt-Devel] USB Hotplug   John Crispin
• [OpenWrt-Devel] VXLAN support   Stijn Tintel
• [OpenWrt-Devel] VXLAN support   Jiri Pirko
• [OpenWrt-Devel] Where init scripts are linked to rc.d?   Weedy
• [OpenWrt-Devel] Which image for the Nanostation Loco M2, WAS:Cannot flash UBNT Loco M2   Aaron Z
• [OpenWrt-Devel] Which image for the Nanostation Loco M2, WAS:Cannot flash UBNT Loco M2   Matthias Schiffer
• [OpenWrt-Devel] ★ OpenWrt Development List, Jason left a message for you   Jason
• [OpenWrt-Devel] ★ OpenWrt Development List, Jason left a message for you   Jason

Last message date: Thu Mar 31 22:02:45 EDT 2016
Archived on: Thu Jun 25 05:56:23 EDT 2020

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...