[OpenWrt-Devel] USB Hotplug
alzhao
alzhao at gmail.com
Fri Mar 4 10:42:19 EST 2016
Hi john,
can you specify which patch? I want to check.
On Fri, 4 Mar 2016 at 23:34, John Crispin <blogic at openwrt.org> wrote:
>
>
> On 04/03/2016 15:07, alzhao wrote:
> > Did you develop the board by yourself? Generally this is a hardware
> > problem, like wrong resistors. After the system boot the USB cannot
> > supply enough power to the drive.
> >
> >
> > On Fri, 4 Mar 2016 at 21:57, Baptiste Clenet <bapclenet at gmail.com
> > <mailto:bapclenet at gmail.com>> wrote:
> >
> > Hi,
> >
> > I run OpenWRT on a mt7688 board, if I plug a pendrive before the
> boot,
> > it is detected and I can store data on it. However, after the board
> > has finished booting, if I plug the pendrive, I can't detect it, the
> > LED on the pendrive switch on and off after a 1/2 sec.
> > Should I include something else to make hotplug work?
> > root at OpenWrt:/# lsmod | grep usb
> > btintel 1209 1 btusb
> > btusb 26816 0
> > ledtrig_usbdev 1936 0
> > nls_base 5008 1 usbcore
> > scsi_mod 90601 2 usb_storage
> > usb_common 1740 1 usbcore
> > usb_storage 37407 0
> > usbcore 117268 7 btusb
> >
> >
> > --
> > Baptiste
> > _______________________________________________
> > openwrt-devel mailing list
> > openwrt-devel at lists.openwrt.org <mailto:
> openwrt-devel at lists.openwrt.org>
> > https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
> >
>
> what revision of openwrt do you use ? i recently pushed a patch that
> fixes a phy reset problem causing usb2.0 devices to not work properly
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160304/93ff706c/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list