[OpenWrt-Devel] [PATCH 2/2] ar71xx: WNR1000v2: enable control of all LEDs and buttons
Hartmut Knaack
knaack.h at gmx.de
Sat Mar 19 14:33:55 EDT 2016
Michal schrieb am 18.03.2016 um 00:36:
> From: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
> Date: Thu, 17 Mar 2016 23:32:48 +0100
> Subject: [PATCH 2/2] ar71xx: WNR1000v2: enable control of all LEDs and buttons
>
> This patch provides full GPIO support for WNR1000v2 (LEDs and buttons).
> It exposes all LEDs to operating system, including Ethernet ones.
Hi Michal,
small nitpick: I would move up the entry in 01_leds to maintain alphabetical
order. Also in wnr1000v2_leds_gpio[], entries would better be grouped/sorted
by the .name property.
Thanks,
Hartmut
>
> Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz at wp.pl>
> ---
> target/linux/ar71xx/base-files/etc/board.d/01_leds | 3 +-
> .../ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c | 132 ++++++++++++++++++++-
> 2 files changed, 129 insertions(+), 6 deletions(-)
>
> diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> index eff6e0d..96c892c 100755
> --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
> +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
> @@ -681,7 +681,8 @@ wlae-ag300n)
> ucidef_set_led_netdev "wireless" "WIRELESS" "buffalo:green:wireless" "wlan0"
> ;;
>
> -wnr2000-v3)
> +wnr2000-v3 |\
> +wnr1000-v2)
> ucidef_set_led_netdev "wan-amber" "WAN (amber)" "netgear:amber:wan" "eth0"
> ucidef_set_led_default "wan-green" "WAN (green)" "netgear:green:wan" "0"
> ucidef_set_led_netdev "wlan" "WLAN" "netgear:blue:wlan" "wlan0"
> diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
> index b1b0394..4af7b4d 100644
> --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
> +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wnr2000-v3.c
> @@ -59,8 +59,26 @@
> #define WNR612V2_GPIO_WMAC_LED_WLAN_GREEN 1
> #define WNR612V2_GPIO_WMAC_BTN_RESET 7
>
> -#define WNR1000V2_GPIO_LED_PWR_AMBER 1
> -#define WNR1000V2_GPIO_LED_PWR_GREEN 11
> +/* WNR1000v2 - connected through AR7240 */
> +#define WNR1000V2_GPIO_LED_WAN_AMBER 0
> +#define WNR1000V2_GPIO_LED_TEST_AMBER 1
> +#define WNR1000V2_GPIO_LED_LAN1_AMBER 6 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
> +#define WNR1000V2_GPIO_LED_LAN2_AMBER 7 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
> +#define WNR1000V2_GPIO_LED_LAN3_AMBER 8 /* AR724X_GPIO_FUNC_JTAG_DISABLE */
> +#define WNR1000V2_GPIO_LED_POWER_GREEN 11
> +#define WNR1000V2_GPIO_LED_LAN4_AMBER 12
> +#define WNR1000V2_GPIO_LED_LAN1_GREEN 13 /* AR724X_..._ETH_SWITCH_LED0 */
> +#define WNR1000V2_GPIO_LED_LAN2_GREEN 14 /* AR724X_..._ETH_SWITCH_LED1 */
> +#define WNR1000V2_GPIO_LED_LAN3_GREEN 15 /* AR724X_..._ETH_SWITCH_LED2 */
> +#define WNR1000V2_GPIO_LED_LAN4_GREEN 16 /* AR724X_..._ETH_SWITCH_LED3 */
> +#define WNR1000V2_GPIO_LED_WAN_GREEN 17 /* AR724X_..._ETH_SWITCH_LED4 */
> +
> +/* WNR1000v2 - connected through AR9285 */
> +#define WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE 1
> +#define WNR1000V2_GPIO_WMAC_LED_WPS_GREEN 5
> +#define WNR1000V2_GPIO_WMAC_BTN_WPS 6
> +#define WNR1000V2_GPIO_WMAC_BTN_RESET 7
> +#define WNR1000V2_GPIO_WMAC_BTN_RFKILL 8
>
> /* Connected through AR7240 */
> #define WPN824N_GPIO_LED_WAN_AMBER 0
> @@ -155,6 +173,7 @@ static struct gpio_led wnr2000v3_wmac_leds_gpio[] = {
> }
> };
>
> +/* Blue WLAN LED for: WNR2000v3, WNR1000v2 */
> static const char *wnr2000v3_wmac_led_name = "netgear:blue:wlan";
>
> static struct gpio_led wnr612v2_leds_gpio[] __initdata = {
> @@ -181,12 +200,60 @@ static const char *wnr612v2_wmac_led_name = "netgear:green:wlan";
>
> static struct gpio_led wnr1000v2_leds_gpio[] __initdata = {
> {
> + .name = "netgear:amber:wan",
> + .gpio = WNR1000V2_GPIO_LED_WAN_AMBER,
> + .active_low = 1,
> + }, {
> + .name = "netgear:amber:test",
> + .gpio = WNR1000V2_GPIO_LED_TEST_AMBER,
> + .active_low = 1,
> + }, {
> + .name = "netgear:amber:lan1",
> + .gpio = WNR1000V2_GPIO_LED_LAN1_AMBER,
> + .active_low = 1,
> + }, {
> + .name = "netgear:amber:lan2",
> + .gpio = WNR1000V2_GPIO_LED_LAN2_AMBER,
> + .active_low = 1,
> + }, {
> + .name = "netgear:amber:lan3",
> + .gpio = WNR1000V2_GPIO_LED_LAN3_AMBER,
> + .active_low = 1,
> + }, {
> .name = "netgear:green:power",
> - .gpio = WNR1000V2_GPIO_LED_PWR_GREEN,
> + .gpio = WNR1000V2_GPIO_LED_POWER_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "netgear:amber:lan4",
> + .gpio = WNR1000V2_GPIO_LED_LAN4_AMBER,
> .active_low = 1,
> }, {
> - .name = "netgear:amber:power",
> - .gpio = WNR1000V2_GPIO_LED_PWR_AMBER,
> + .name = "netgear:green:lan1",
> + .gpio = WNR1000V2_GPIO_LED_LAN1_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "netgear:green:lan2",
> + .gpio = WNR1000V2_GPIO_LED_LAN2_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "netgear:green:lan3",
> + .gpio = WNR1000V2_GPIO_LED_LAN3_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "netgear:green:lan4",
> + .gpio = WNR1000V2_GPIO_LED_LAN4_GREEN,
> + .active_low = 1,
> + }, {
> + .name = "netgear:green:wan",
> + .gpio = WNR1000V2_GPIO_LED_WAN_GREEN,
> + .active_low = 1,
> + }
> +};
> +
> +static struct gpio_led wnr1000v2_wmac_leds_gpio[] = {
> + {
> + .name = "netgear:green:wps",
> + .gpio = WNR1000V2_GPIO_WMAC_LED_WPS_GREEN,
> .active_low = 1,
> }
> };
> @@ -303,6 +370,31 @@ static struct gpio_keys_button wnr612v2_wmac_keys_gpio[] = {
> }
> };
>
> +static struct gpio_keys_button wnr1000v2_wmac_keys_gpio[] = {
> + {
> + .desc = "wps",
> + .type = EV_KEY,
> + .code = KEY_WPS_BUTTON,
> + .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = WNR1000V2_GPIO_WMAC_BTN_WPS,
> + .active_low = 1,
> + }, {
> + .desc = "reset",
> + .type = EV_KEY,
> + .code = KEY_RESTART,
> + .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = WNR1000V2_GPIO_WMAC_BTN_RESET,
> + .active_low = 1,
> + }, {
> + .desc = "rfkill",
> + .type = EV_KEY,
> + .code = KEY_RFKILL,
> + .debounce_interval = WNR2000V3_KEYS_DEBOUNCE_INTERVAL,
> + .gpio = WNR1000V2_GPIO_WMAC_BTN_RFKILL,
> + .active_low = 1,
> + }
> +};
> +
> /*
> * For WNR2000v3 ART flash area used for WLAN MAC is usually empty (0xff)
> * so ath9k driver uses random MAC instead each time module is loaded.
> @@ -455,6 +547,25 @@ static void __init wnr1000v2_setup(void)
> {
> u8 wlan_mac_addr[6];
>
> + /*
> + * Disable JTAG and CLKs. Allow OS to control all link LEDs.
> + * Note: U-Boot for WNR1000v2 sets undocumented bit 15 but
> + * we leave it for now.
> + */
> + ath79_gpio_function_setup(AR724X_GPIO_FUNC_JTAG_DISABLE |
> + AR724X_GPIO_FUNC_UART_EN,
> + AR724X_GPIO_FUNC_CLK_OBS1_EN |
> + AR724X_GPIO_FUNC_CLK_OBS2_EN |
> + AR724X_GPIO_FUNC_CLK_OBS3_EN |
> + AR724X_GPIO_FUNC_CLK_OBS4_EN |
> + AR724X_GPIO_FUNC_CLK_OBS5_EN |
> + AR724X_GPIO_FUNC_GE0_MII_CLK_EN |
> + AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN |
> + AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN |
> + AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN |
> + AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN |
> + AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN);
> +
> wnr_get_wmac(wlan_mac_addr, WNR2000V3_MAC0_OFFSET,
> WNR2000V3_MAC1_OFFSET, WNR2000V3_WMAC_OFFSET);
>
> @@ -462,6 +573,17 @@ static void __init wnr1000v2_setup(void)
>
> ath79_register_leds_gpio(-1, ARRAY_SIZE(wnr1000v2_leds_gpio),
> wnr1000v2_leds_gpio);
> +
> + ap9x_pci_setup_wmac_led_pin(0, WNR1000V2_GPIO_WMAC_LED_WLAN_BLUE);
> + ap9x_pci_setup_wmac_led_name(0, wnr2000v3_wmac_led_name);
> +
> + ap9x_pci_setup_wmac_leds(0, wnr1000v2_wmac_leds_gpio,
> + ARRAY_SIZE(wnr1000v2_wmac_leds_gpio));
> +
> + /* All 3 buttons are connected to wireless chip */
> + ap9x_pci_setup_wmac_btns(0, wnr1000v2_wmac_keys_gpio,
> + ARRAY_SIZE(wnr1000v2_wmac_keys_gpio),
> + WNR2000V3_KEYS_POLL_INTERVAL);
> }
>
> MIPS_MACHINE(ATH79_MACH_WNR1000_V2, "WNR1000V2", "NETGEAR WNR1000 V2", wnr1000v2_setup);
>
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list