[OpenWrt-Devel] RT5350 board issues.

[Frédéric Konrad]

Ping?

Any idea for this? Or just a clue so I can fix that?
(I don't have much experience with ralink mips stuff)
Using a vanilla kernel seems to boot fine BTW..

Thanks,
Fred

On 01/03/2016 12:19, Frederic Konrad wrote:
> Hi everybody,
>  
>  I'm a openwrt newbie and I've some issues running OpenWRT on a RT5350 board.
>  
>  I tried "openwrt-15.05-ramips-rt305x-vmlinux.bin" which I transformed in
>  uImage with:
>  mkimage -A mips -O linux -T kernel -C none -a 0x80000000 -e 0x80000000 \
>   -d openwrt-15.05-ramips-rt305x-vmlinux.bin uImage
>  
>  But I only get three lines loop when I put that on my target through uboot + tftp:
>  
>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>  [    0.000000] bootconsole [early0] enabled
>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>  [    0.000000] bootconsole [early0] enabled
>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>  [    0.000000] bootconsole [early0] enabled
>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>  [    0.000000] bootconsole [early0] enabled
>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>  [    0.000000] bootconsole [early0] enabled
>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>  [    0.000000] Linux version 3.18.20 (buildbot at builder1) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r46450) ) #1 Fri Sep 4 19:34:21 CEST 2015
>  [    0.000000] SoC Type: Ralink RT5350 id:1 rev:3
>  [    0.000000] bootconsole [early0] enabled
>  [    0.000000] CPU0 revision is: 0001964c (MIPS 24KEc)
>  
>  I've the exact same result when I clone the git and compile the whole thing.
>  
>  Did I miss something?
> Thanks,Fred
>
>
>
> _______________________________________________
> openwrt-devel mailing list
> openwrt-devel at lists.openwrt.org
> https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160304/04b9605f/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel