[OpenWrt-Devel] [PATCH] zynq: Re-implement mkits.sh and use it
Jason Wu
jason.wu.misc at gmail.com
Fri Mar 18 09:19:57 EDT 2016
The new mkits.sh is a complete new implementation to support:
- multi-configuration (upto 10 with -c option). First -c used defines
the default conf used.
- multi-image support - multiple kernel/fdt/ramdsik image (upto 50 images)
- per image configuration: Tools now reuse the option for each images
- hash algorithm and generated required subnodes
- compression
- signature and generated required subnodes (not tested)
This allows user to generate a simple its that only has one configuration
that only boot with 1 kernel + 1 fdt to 4 different boot configuration
with different image combination. For an example:
creating a its with 2 kernel, 1 dtb, 2 rootfs images and has the following
configurations:
1: kernel0 + dtb0 + rootfs0 (default boot configuration)
2. kernel0 + dtb0 + rootfs1
3. kernel1 + dtb0 + rootfs0
4. kernel1 + dtb0 + rootfs1
5. kernel0 + dtb1
where kernel1 and rootfs0 is gzip compressed.
The command to generate the its is shown as follows:
$ ./mkits.sh -A arm -v 4.4 -k kernel0 -C none -c 1 -c 2 -c5 \
-k kernel1 -C gzip -c 3 -c 4 -h crc32 \
-d dtb0 -c 1 -c 2 -c 3 -c 4 -h sha1 -h crc32\
-d dtb1 -c 5 -h sha1 \
-r rootfs0 -C gzip -c 1 -c 2 \
-r rootfs1 -C none -c3 -c4
First -c option used defines the default boot configuration.
The key benefit is to have more flexible ITS generation. A typical example,
is to create a fitImage with 1 kernel with multiple dtb to provide different
features. E.g. system boot with ramdisk or sdroot or nfsroot and etc.
Signed-off-by: Jason Wu <jason.wu.misc at gmail.com>
diff --git a/target/linux/zynq/image/Makefile b/target/linux/zynq/image/Makefile
index 99293a6..bb60222 100644
--- a/target/linux/zynq/image/Makefile
+++ b/target/linux/zynq/image/Makefile
@@ -32,11 +32,13 @@ define Image/boot-imgs
# create FIT image with rootfs
./mkits.sh \
- -D $(DEVICE_LC) -o $(KDIR)/fit-$(DEVICE_LC).its -k $(KDIR)/zImage \
- -d $(BIN_DIR)/$(IMG_PREFIX)-system.dtb \
+ -D $(DEVICE_LC) -o $(KDIR)/fit-$(DEVICE_LC).its -A $(ARCH) \
+ -v $(LINUX_VERSION) \
+ -k $(KDIR)/zImage \
-C none -a $(KERNEL_LOADADDR) -e $(KERNEL_ENTRY_POINT) \
- -A $(ARCH) -v $(LINUX_VERSION) \
- -r $(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz -z gzip
+ -d $(BIN_DIR)/$(IMG_PREFIX)-system.dtb \
+ -r $(BIN_DIR)/$(IMG_PREFIX)-rootfs.cpio.gz \
+ -C gzip
PATH=$(LINUX_DIR)/scripts/dtc:$(PATH) mkimage -f $(KDIR)/fit-$(DEVICE_LC).its $(KDIR)/fit-$(DEVICE_LC).itb
$(CP) $(KDIR)/fit-$(DEVICE_LC).itb $(BIN_DIR)/$(IMG_PREFIX)-fit.itb
ln -fs $(IMG_PREFIX)-fit.itb $(BIN_DIR)/fit.itb
diff --git a/target/linux/zynq/image/mkits.sh b/target/linux/zynq/image/mkits.sh
index 2b00d0f..b3606d2 100755
--- a/target/linux/zynq/image/mkits.sh
+++ b/target/linux/zynq/image/mkits.sh
@@ -1,8 +1,8 @@
-#!/bin/bash
+#!/usr/bin/env bash
#
# Licensed under the terms of the GNU GPL License version 2 or later.
#
-# Author: Peter Tyser <ptyser at xes-inc.com>
+# Author: Jason Wu <jason.hy.wu at gmail.com>
#
# U-Boot firmware supports the booting of images in the Flattened Image
# Tree (FIT) format. The FIT format uses a device tree structure to
@@ -13,138 +13,545 @@
# FIT images). See doc/uImage.FIT/howto.txt in U-Boot source code for
# additional information on FIT images.
#
+# This tools supports:
+# - multi-configuration
+# - multi-image support - multiple kernel/fdt/ramdsik
+# - per image configuration:
+# - hash algorithm and generated required subnodes
+# - compression
+# - signature and generated required subnodes
+#
+set -e
+
+# image config limit
+MAX_IMG=50
+# conf config limit
+MAX_CONF=10
+
+# declare main data array
+declare -a img_array
+declare -a conf_array
+
+# initialize array with empty values
+for (( index=1; index<=$MAX_IMG; index++ )); do
+ declare -a img$index
+ for i in {0..13}; do
+ eval img${index}[$i]=""
+ done
+done
+
+for (( index=1; index<=$MAX_CONF; index++ )); do
+ declare -a conf$index
+ for i in {0..9}; do
+ eval conf${index}[$i]=""
+ done
+done
+
+# imgX array index information
+# 0: type of image - kernel, fdt, ramdsik
+# 1: image location
+# 2: image index
+# 3: loadaddr of image
+# 4: entrypoint of image
+# 5: compression
+# 6: hash algorithm
+# 7: part of the configuration
+# 8: Human friend name for the image
+# 9: key file name
+# 10: signature
+
+# confX array index information
+# 0: conf number
+# 1: kernel conf
+# 2: fdt conf
+# 3: rootfs conf
+# 4: kernel key file
+# 5: fdt key file
+# 6: rootfs key file
+# 7: kernel sign_algorithm
+# 8: fdt sign_algorithm
+# 9: rootfs sign_algorithm
usage() {
- echo "Usage: `basename $0` -A arch -C comp -a addr -e entry" \
- "-v version -k kernel [-D name -d dtb] -o its_file"
+ echo "Usage: `basename $0` -A arch -v version -o its_file" \
+ "-k kernel -a addr -e entry [-C none] [-h sha1] [-c conf]"
+ echo -e "Example1:\n\tkernel image ker_img1 with no compression +"
+ echo -e "\tsha1 hash + fdt dtb1 with sha1 and crc32 hash for conf 1"
+ echo -e "\t $ `basename $0` -A arm -v 4.4 \ "
+ echo -e "\t -k ker_img1 -C none -h sha1 -e 0x8000 -a 0x8000 -c 1 \ "
+ echo -e "\t -d dtb1 -h sha1 -h crc32 -c 1\n"
+ echo "General settings:"
echo -e "\t-A ==> set architecture to 'arch'"
+ echo -e "\t-v ==> set kernel version to 'version'"
+ echo -e "\t-o ==> create output file 'its_file' [optional]"
+ echo "Input image type:"
+ echo -e "\t-k ==> kernel image 'kernel'"
+ echo -e "\t-d ==> Device Tree Blob 'dtb'"
+ echo -e "\t-r ==> ramdisk image 'ramdisk"
+ echo "Per image configurations:"
echo -e "\t-C ==> set compression type 'comp'"
+ echo -e "\t-c ==> set image config (multiple -c allowed)"
echo -e "\t-a ==> set load address to 'addr' (hex)"
echo -e "\t-e ==> set entry point to 'entry' (hex)"
- echo -e "\t-v ==> set kernel version to 'version'"
- echo -e "\t-k ==> include kernel image 'kernel'"
- echo -e "\t-D ==> human friendly Device Tree Blob 'name'"
- echo -e "\t-d ==> include Device Tree Blob 'dtb'"
- echo -e "\t-r ==> include ramdisk"
- echo -e "\t-z ==> ramdisk compression type"
- echo -e "\t-o ==> create output file 'its_file'"
+ echo -e "\t-D ==> human friendly 'name' (one word only)"
+ echo -e "\t-h ==> set hash algorithm (multiple -h allowed)"
+ echo -e "\t-s ==> set signature for given config image"
+ echo -e "\t-K ==> set key file for given config image"
exit 1
}
-while getopts ":A:a:C:D:d:e:k:o:v:r:z:" OPTION
-do
- case $OPTION in
- A ) ARCH=$OPTARG;;
- a ) LOAD_ADDR=$OPTARG;;
- C ) COMPRESS=$OPTARG;;
- D ) DEVICE=$OPTARG;;
- d ) DTB=$OPTARG;;
- e ) ENTRY_ADDR=$OPTARG;;
- k ) KERNEL=$OPTARG;;
- o ) OUTPUT=$OPTARG;;
- v ) VERSION=$OPTARG;;
- r ) RAMDISK=$OPTARG;;
- z ) RD_COMPRESS=$OPTARG;;
- * ) echo "Invalid option passed to '$0' (options:$@)"
- usage;;
+#
+# $1: array name
+# $2: index
+# $3: value
+# $4: append operation
+#
+array_put()
+{
+ if [ -z "$4" ]; then
+ eval $1[$2]=$3
+ else
+ eval $1[$2]=\"\${$1[$2]} $3\"
+ fi
+}
+
+#
+# $1: array name
+# $2: index
+#
+array_get()
+{
+ local val
+ eval val=\${$1[$2]}
+ echo $val
+}
+
+parse_args() {
+ local i=-1 k=-1 d=-1 r=-1
+ while getopts ":A:a:C:c:D:d:e:h:k:K:o:v:r:s:" OPTION; do
+ case $OPTION in
+ A ) ARCH=$OPTARG;;
+ a ) array_put img$i 3 $OPTARG;;
+ C ) value_sanity_chk compression $OPTARG;
+ array_put img$i 5 $OPTARG;;
+ c ) array_put img$i 7 $OPTARG append;;
+ D ) array_put img$i 8 $OPTARG;;
+ d ) i=$(($i + 1));
+ d=$(($d + 1));
+ img_array[$i]=img$i;
+ array_put img$i 0 fdt;
+ array_put img$i 1 $OPTARG;
+ array_put img$i 2 $d;
+ ;;
+ e ) array_put img$i 4 $OPTARG;;
+ h ) value_sanity_chk hash $OPTARG;
+ array_put img$i 6 $OPTARG append;;
+ k ) i=$(($i + 1));
+ k=$(($k + 1));
+ img_array[$i]=img$i;
+ array_put img$i 0 "kernel";
+ array_put img$i 1 $OPTARG;
+ array_put img$i 2 $k;
+ ;;
+ K ) array_put img$i 9 $OPTARG;;
+ o ) OUTPUT=$OPTARG;;
+ v ) VERSION=$OPTARG;;
+ r ) i=$(($i + 1));
+ r=$(($r + 1));
+ img_array[$i]=img$i;
+ array_put img$i 0 "ramdisk";
+ array_put img$i 1 $OPTARG;
+ array_put img$i 2 $r;
+ ;;
+ s ) value_sanity_chk signature $OPTARG;
+ array_put img$i 10 $OPTARG;
+ ;;
+ * ) echo "Invalid option passed to '$0' (options:$@)"
+ usage;;
+ esac
+ done
+ [ -n "${OUTPUT}" ] || OUTPUT=fitimage.its
+ [ -n "${VERSION}" ] || VERSION="Unknown"
+ [ -n "${ARCH}" ] || ARCH=arm
+}
+
+#
+# sanity check for signature, compression and hash
+#
+value_sanity_chk()
+{
+ local valid=""
+ case $1 in
+ signature) valid="sha-1,rsa-2048 sha-256,rsa-2048 sha-256,rsa-4096";;
+ compression) valid="gzip bzip2 none";;
+ hash) valid="sha1 md5 crc32";;
esac
-done
+ if ! echo $valid | grep -q "$2"; then
+ echo "Error: Invalid $1 provided '$2'"
+ echo "Valid options are: $valid"
+ exit 255
+ fi
+}
-# Make sure user entered all required parameters
-if [ -z "${ARCH}" ] || [ -z "${COMPRESS}" ] || [ -z "${LOAD_ADDR}" ] || \
- [ -z "${ENTRY_ADDR}" ] || [ -z "${VERSION}" ] || [ -z "${KERNEL}" ] || \
- [ -z "${OUTPUT}" ]; then
- usage
-fi
-
-ARCH_UPPER=`echo $ARCH | tr '[:lower:]' '[:upper:]'`
-
-# Conditionally create fdt information
-if [ -n "${DTB}" ]; then
- FDT="
- fdt at 1 {
- description = \"${ARCH_UPPER} OpenWrt ${DEVICE} device tree blob\";
- data = /incbin/(\"${DTB}\");
- type = \"flat_dt\";
- arch = \"${ARCH}\";
- compression = \"none\";
- hash at 1 {
- algo = \"crc32\";
- };
- hash at 2 {
- algo = \"sha1\";
- };
- };
-"
- CONF=" fdt = \"fdt at 1\";"
-fi
-
-# Conditionally create ramdisk node
-if [ -n "${RAMDISK}" ]; then
- RD_COMPRESS=${RD_COMPRESS:-none}
- RD="
- ramdisk at 1 {
- description = \"${ARCH_UPPER} OpenWrt ${DEVICE} ramdisk\";
- data = /incbin/(\"${RAMDISK}\");
- type = \"ramdisk\";
- arch = \"${ARCH}\";
- os = \"linux\";
- compression = \"${RD_COMPRESS}\";
- hash at 1 {
- algo = \"crc32\";
- };
- hash at 2 {
- algo = \"sha1\";
+#
+# Emit the fitImage section bits
+#
+# $1: Section bit type: fitstart - its header
+# imagestart - image section start
+# confstart - configuration section start
+# sectend - section end
+# fitend - fitimage end
+# $2: optional variable for confstart section
+#
+emit_its() {
+ case $1 in
+ fitstart)
+ cat << EOF > ${OUTPUT}
+/dts-v1/;
+
+/ {
+ description = "U-Boot fitImage for ${VERSION} kernel";
+ #address-cells = <1>;
+EOF
+ ;;
+ imagestart)
+ echo -e "\n\timages {" >> ${OUTPUT};;
+ confstart)
+ echo -e "\tconfigurations {\n\t\tdefault = \"conf@${2:-0}\";" \
+ >> ${OUTPUT};;
+ sectend)
+ echo -e "\t};" >> ${OUTPUT};;
+ fitend)
+ echo -e "};" >> ${OUTPUT};;
+ esac
+}
+
+#
+# Emit kernel image node
+#
+emit_kernel() {
+ local image=${1}
+ local count=${2:-${MAX_IMG}}
+ local loaddaddr=${3:-0x8000}
+ local entrypoint=${4:-0x8000}
+ local compresson=${5:-none}
+ local checksum=${6:-sha1}
+ local name=${7}
+
+ [ -z "${name}" ] || name=" ${name}"
+ cat << EOF >> ${OUTPUT}
+ kernel@${count} {
+ description = "Linux Kernel${name}";
+ data = /incbin/("${image}");
+ type = "kernel";
+ arch = "${ARCH}";
+ os = "linux";
+ compression = "${compresson}";
+ load = <${loaddaddr}>;
+ entry = <${entrypoint}>;
+EOF
+ emit_cksum ${checksum}
+
+ if [ -z "$SIGN_IN_CONF" ] ; then
+ emit_signature "$9" "" "" "$8" "" ""
+ fi
+
+ echo " };" >> ${OUTPUT}
+}
+
+#
+# Emit fdt node
+#
+emit_fdt() {
+ local image=${1}
+ local count=${2:-${MAX_IMG}}
+ local compresson=${3:-none}
+ local checksum=${4:-sha1}
+ local name=${5}
+
+ [ -z "${name}" ] || name=" ${name}"
+ cat << EOF >> ${OUTPUT}
+ fdt@${count} {
+ description = "Flattened Device Tree blob${name}";
+ data = /incbin/("${image}");
+ type = "flat_dt";
+ arch = "${ARCH}";
+ compression = "none";
+EOF
+ emit_cksum ${checksum}
+ if [ -z "$SIGN_IN_CONF" ] ; then
+ emit_signature "" "$7" "" "" "$6" ""
+ fi
+ echo " };" >> ${OUTPUT}
+}
+
+#
+# Emit ramdisk node
+#
+emit_ramdisk() {
+ local image=${1}
+ local count=${2:-${MAX_IMG}}
+ local compresson=${3:-none}
+ local checksum=${4:-sha1}
+ local name=${5}
+
+ [ -z "${name}" ] || name=" ${name}"
+ cat << EOF >> ${OUTPUT}
+ ramdisk@${count} {
+ description = "ramdisk${name}";
+ data = /incbin/("${image}");
+ type = "ramdisk";
+ arch = "${ARCH}";
+ os = "linux";
+ compression = "${compresson}";
+EOF
+ emit_cksum ${checksum}
+ if [ -z "$SIGN_IN_CONF" ] ; then
+ emit_signature "" "" "$7" "" "" "$6"
+ fi
+ echo " };" >> ${OUTPUT}
+}
+
+#
+# Emit check sum sub node
+#
+emit_cksum() {
+ csum_list=$@
+ count=1
+ for csum in ${csum_list}; do
+ cat << EOF >> ${OUTPUT}
+ hash@${count} {
+ algo = "${csum}";
};
- };
-"
- if [ -z "${CONF}" ]; then
- CONF=" ramdisk = \"ramdisk at 1\";"
+EOF
+ count=`expr ${count} + 1`
+ done
+}
+
+#
+# Emit signature sub node
+#
+emit_signature() {
+ local kernel=$1
+ local fdt=$2
+ local rootfs=$3
+ local kernel_key=$4
+ local fdt_key=$5
+ local rootfs_key=$6
+ local imgs=""
+ local count=0
+ local chk_list="" algo="" algos="" i=""
+
+ for i in kernel fdt rootfs; do
+ eval algo=\$$i
+ eval key=\$${i}_key
+ [ -n "$algo" ] || continue
+ if ! echo "$algos" | grep -q $algo; then
+ if [ -z "$algos" ]; then
+ algos=$algo
+ else
+ algos="${algos} $algo"
+ fi
+ fi
+ if ! echo "$keys" | grep -q $key; then
+ if [ -z "$keys" ]; then
+ keys=$key
+ else
+ keys="${keys} $key"
+ fi
+ fi
+ done
+
+ for algo in $algos; do
+ for key in $keys; do
+ img=""
+ for i in kernel fdt rootfs; do
+ eval tmp_algo=\$$i
+ eval tmp_key=\$${i}_key
+ [ "$tmp_algo" == "$algo" ] || continue
+ [ "$tmp_key" == "$key" ] || continue
+ if [ -z "$img" ]; then
+ img=$i
+ else
+ img=${img},$i
+ fi
+ done
+
+ [ -n "$img" ] || continue
+ cat << EOF >> ${OUTPUT}
+ signature@${count} {
+ algo = "${algo}";
+ key-name-hint = "${key}";
+EOF
+ if [ -n "$SIGN_IN_CONF" ] ; then
+ echo " sign-images = \"$img\";" >> ${OUTPUT}
+ fi
+ echo " };" >> ${OUTPUT}
+
+ count=`expr ${count} + 1`
+ done
+ done
+}
+
+#
+# Emit config sub nodes
+#
+emit_config() {
+ local conf_csum="sha1"
+
+ if [ -z "${2}" ]; then
+ echo "Error: config has no kernel img, skipping conf node!"
+ return 0
+ fi
+
+ # Test if we have any DTBs at all
+ if [ -z "${3}" ] ; then
+ conf_desc="Boot Linux kernel"
+ fdt_line=""
else
- CONF="$CONF
- ramdisk = \"ramdisk at 1\";"
+ conf_desc="Boot Linux kernel with FDT blob"
+ fdt_line="
+ fdt = \"fdt@${3}\";"
fi
-fi
-# Create a default, fully populated DTS file
-DATA="/dts-v1/;
+ # Test if we have any ROOTFS at all
+ if [ -n "${4}" ] ; then
+ conf_desc="$conf_desc + ramdisk"
+ fdt_line="${fdt_line}
+ ramdisk = \"ramdisk@${4}\";"
+ fi
-/ {
- description = \"${ARCH_UPPER} OpenWrt FIT (Flattened Image Tree)\";
- #address-cells = <1>;
+ kernel_line="kernel = \"kernel@${2}\";"
- images {
- kernel at 1 {
- description = \"${ARCH_UPPER} OpenWrt Linux-${VERSION}\";
- data = /incbin/(\"${KERNEL}\");
- type = \"kernel\";
- arch = \"${ARCH}\";
- os = \"linux\";
- compression = \"${COMPRESS}\";
- load = <${LOAD_ADDR}>;
- entry = <${ENTRY_ADDR}>;
+ cat << EOF >> ${OUTPUT}
+ conf@${1} {
+ description = "${conf_desc}";
+ ${kernel_line}${fdt_line}
hash at 1 {
- algo = \"crc32\";
+ algo = "${conf_csum}";
};
- hash at 2 {
- algo = \"sha1\";
- };
- };
+EOF
+ if [ -n "$SIGN_IN_CONF" ] ; then
+ emit_signature "$5" "$6" "$7" "$8" "$9" "${10}"
+ fi
-${RD}
-${FDT}
+ echo " };" >> ${OUTPUT}
+}
+
+#
+# remove prefix space
+#
+remove_prefix_space()
+{
+ echo "$@" | sed "s:^ ::g"
+}
+
+#
+# generate image nodes and its subnodes
+#
+emit_image_nodes()
+{
+ local t img_c img_i img_index chk
+ local img_type img_path img_count img_loadadr img_entrypoint \
+ img_compression img_hash img_conf img_name img_key img_sign
+
+ emit_its imagestart
+ for t in "kernel" "fdt" "ramdisk"; do
+ img_index=0
+ for a in ${img_array[@]}; do
+ img_type=$(array_get $a 0)
+ img_path=$(array_get $a 1)
+ img_count=$(array_get $a 2)
+ img_loadadr=$(array_get $a 3)
+ img_entrypoint=$(array_get $a 4)
+ img_compression=$(array_get $a 5)
+ img_hash=$(array_get $a 6)
+ img_conf=$(array_get $a 7)
+ img_name=$(array_get $a 8)
+ img_key=$(array_get $a 9)
+ img_sign=$(array_get $a 10)
+
+ img_conf=$(remove_prefix_space $img_conf)
+ img_hash=$(remove_prefix_space $img_hash)
+
+ [ "${img_type}" == $t ] || continue
+ # generate sub nodes
+ eval chk=\$DEF_$t
+ [ -n "${chk}" ] || eval DEF_$t=$img_count
+ case $t in
+ kernel) emit_kernel "$img_path" "$img_count" \
+ "$img_loadadr" "$img_entrypoint" \
+ "$img_compression" "$img_hash" \
+ "$img_name" "$img_key" "$img_sign";;
+ fdt) emit_fdt "$img_path" "$img_count" \
+ "$img_compression" "$img_hash" \
+ "$img_name" "$img_key" "$img_sign";;
+
+ ramdisk) emit_ramdisk "$img_path" "$img_count" \
+ "$img_compression" "$img_hash" \
+ "$img_name" "$img_key" "$img_sign";;
+ esac
+
+ # set up configuration data
+ for img_c in ${img_conf}; do
+ img_i=""
+ #set up default configuration if its not set
+ [ -n "$DEF_CONFIG" ] || DEF_CONFIG=$img_c
+ [ -n "${img_c}" ] || continue
+ [ -z "${img_c}" ] || conf_array[$img_c]=conf$img_c
+ array_put conf$img_c 0 ${img_c}
+ case $t in
+ kernel) img_i=1;;
+ fdt) img_i=2;;
+ ramdisk) img_i=3;;
+ esac
+ array_put conf$img_c $img_i $img_index
+ array_put conf$img_c $(($img_i + 3)) ${img_sign}
+ array_put conf$img_c $(($img_i + 6)) ${img_key}
+ done
+ img_index=$(($img_index + 1))
+ done
+ done
+ emit_its sectend
+}
+
+#
+# generate configuration node and its subnodes
+#
+emit_configuration_nodes ()
+{
+ local count kernel fdt ramdisk ker_file fdt_file rfs_file ker_sign \
+ fdt_sign rfs_sign
+ emit_its confstart $DEF_CONFIG
+ for a in ${conf_array[@]}; do
+ count=$(array_get $a 0)
+ kernel=$(array_get $a 1)
+ fdt=$(array_get $a 2)
+ ramdisk=$(array_get $a 3)
+ er_file=$(array_get $a 4)
+ fdt_file=$(array_get $a 5)
+ rfs_file=$(array_get $a 6)
+ ker_sign=$(array_get $a 7)
+ fdt_sign=$(array_get $a 8)
+ rfs_sign=$(array_get $a 9)
+ emit_config "$count" "$kernel" "$fdt" "$ramdisk" "$ker_file" \
+ "$fdt_file" "$rfs_file" "$ker_sign" "$fdt_sign" \
+ "$rfs_sign"
+ done
+ if [ -z "${DEF_CONFIG}" ]; then
+ emit_config "0" "$DEF_kernel" "$DEF_fdt" "$DEF_ramdisk"
+ fi
+ emit_its sectend
+}
- };
+# Set to none empty to create signature sub node under images node
+SIGN_IN_CONF=${SIGN_IN_CONF:-""}
+# Set to default config used
+DEF_CONFIG=${DEF_CONFIG:-""}
- configurations {
- default = \"config at 1\";
- config at 1 {
- description = \"OpenWrt\";
- kernel = \"kernel at 1\";
-${CONF}
- };
- };
-};"
+parse_args $@
-# Write .its file to disk
-echo "$DATA" > ${OUTPUT}
+emit_its fitstart
+emit_image_nodes
+emit_configuration_nodes
+emit_its fitend
--
1.9.1
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list