[OpenWrt-Devel] [PATCH] ar71xx: fix qca956x ge0 speed

[Weijie Gao]

when qca956x uses the internal fe switch, the dummy function should be used

Signed-off-by: Weijie Gao <hackpascal at gmail.com>
---
 target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index b43c80a..f292800 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -1128,7 +1128,7 @@ void __init ath79_register_eth(unsigned int id)
 			if (pdata->phy_if_mode == PHY_INTERFACE_MODE_SGMII)
 				pdata->set_speed = qca956x_set_speed_sgmii;
 			else
-				pdata->set_speed = ath79_set_speed_ge0;
+				pdata->set_speed = ath79_set_speed_dummy;
 		} else {
 			pdata->reset_bit = QCA955X_RESET_GE1_MAC |
 					   QCA955X_RESET_GE1_MDIO;
-- 
2.5.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel