[OpenWrt-Devel] [PATCH v3 10/11] ltq-vdsl-app: do not set the reserved bit 4 in the xTSE 8

[Hauke Mehrtens]

I do not know if this causes any problems now, but we should not set
it, because it is reserved. Some more recent versions of the Lantiq DSL
API driver and Control is checking if only valid bits are set.

Signed-off-by: Hauke Mehrtens <hauke at hauke-m.de>
---
 package/network/config/ltq-vdsl-app/files/dsl_control | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/package/network/config/ltq-vdsl-app/files/dsl_control b/package/network/config/ltq-vdsl-app/files/dsl_control
index 6d254da..5ca1b12 100644
--- a/package/network/config/ltq-vdsl-app/files/dsl_control
+++ b/package/network/config/ltq-vdsl-app/files/dsl_control
@@ -21,14 +21,14 @@ EXTRA_HELP="	status  Get DSL status information
 # G.992.5 Annex A / M
 # G.993.2 Annex A/B/C
 # G.993.5 Annex A/B/C
-xtse_xdsl_a="05_01_04_00_4C_01_04_0F"
+xtse_xdsl_a="05_01_04_00_4C_01_04_07"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
 # G.992.5 Annex B
 # G.993.2 Annex A/B/C
 # G.993.5 Annex A/B/C
-xtse_xdsl_b="10_00_10_00_00_04_00_0F"
+xtse_xdsl_b="10_00_10_00_00_04_00_07"
 
 # G.992.1 Annex B
 # G.992.3 Annex B
@@ -37,7 +37,7 @@ xtse_xdsl_b="10_00_10_00_00_04_00_0F"
 # G.992.5 Annex J
 # G.993.2 Annex A/B/C
 # G.993.5 Annex A/B/C
-xtse_xdsl_j="10_00_10_40_00_04_01_0F"
+xtse_xdsl_j="10_00_10_40_00_04_01_07"
 
 # G.992.1 Annex B
 xtse_xdsl_bdmt="10_00_00_00_00_00_00_00"
-- 
2.7.0
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel