[OpenWrt-Devel] [PATCH] Add option to read an alternative config file
Toan Pham
tpham3783 at gmail.com
Sun Mar 20 09:54:38 EDT 2016
Would someone review and comment on the below patch please?
thanks,
TP
On Thu, Mar 3, 2016 at 3:26 PM, Toan Pham <tpham3783 at gmail.com> wrote:
>
> Presently, Openwrt reads default config filename ".config" or from
> $(HOME)/.openwrt/defconfig if it exists. This patch will allow users to
> specify an alternative config file (using relative or absolute path) from
> the command line. ie)
>
> make TARGET_CONFIG=/src/build/config/boardXYZ.config
>
>
> This patch is introduced because in the future, i would like to be able to
> treat OpenWrt SDK as a blackbox. Users can build multiple targets without
> polluting the SDE environment by being able to specify an input config file
> and an output target directory. For example:
>
> make TARGET_CONFIG=/tmp/test.config TARGET_OUTPUT_DIR=/tmp/testboard
>
> where, TARGET_OUTPUT_DIR would contain the output results like: bin,
> build_dir, staging_dir
>
> Another advantage of the above example is that it allows building on
> tmpfs, which would sufficiently speed up build time.
>
> Please review and comment! thanks!
>
> Signed-off-by: Toan Pham <tpham3783 at gmail.com>
> ---
> diff --git a/Makefile b/Makefile
> index 8ba2bfc..452bef2 100644
> --- a/Makefile
> +++ b/Makefile
> @@ -62,7 +62,7 @@ $(BUILD_DIR)/.prepared: Makefile
> @mkdir -p $$(dirname $@)
> @touch $@
>
> -tmp/.prereq_packages: .config
> +tmp/.prereq_packages: $(TARGET_CONFIG)
> unset ERROR; \
> for package in $(sort $(prereq-y) $(prereq-m)); do \
> $(_SINGLE)$(NO_TRACE_MAKE) -s -r -C package/$$package prereq ||
> ERROR=1; \
> @@ -83,7 +83,7 @@ prereq: $(target/stamp-prereq) tmp/.prereq_packages
> exit 1; \
> fi
>
> -prepare: .config $(tools/stamp-install) $(toolchain/stamp-install)
> +prepare: $(TARGET_CONFIG) $(tools/stamp-install)
> $(toolchain/stamp-install)
> world: prepare $(target/stamp-compile) $(package/stamp-compile)
> $(package/stamp-install) $(target/stamp-install) FORCE
> $(_SINGLE)$(SUBMAKE) -r package/index
>
> diff --git a/include/kernel-build.mk b/include/kernel-build.mk
> index a52c90d..f732d03 100644
> --- a/include/kernel-build.mk
> +++ b/include/kernel-build.mk
> @@ -102,7 +102,7 @@ define BuildKernel
> echo; \
> ) > $$@
>
> - $(STAMP_CONFIGURED): $(STAMP_PREPARED) $(LINUX_KCONFIG_LIST)
> $(TOPDIR)/.config
> + $(STAMP_CONFIGURED): $(STAMP_PREPARED) $(LINUX_KCONFIG_LIST)
> $(TARGET_CONFIG)
> $(Kernel/Configure)
> touch $$@
>
> diff --git a/include/kernel-defaults.mk b/include/kernel-defaults.mk
> index 406fd46..3cfcdb3 100644
> --- a/include/kernel-defaults.mk
> +++ b/include/kernel-defaults.mk
> @@ -107,11 +107,11 @@ endef
> define Kernel/Configure/Default
> $(LINUX_CONF_CMD) > $(LINUX_DIR)/.config.target
> # copy CONFIG_KERNEL_* settings over to .config.target
> - awk
> '/^(#[[:space:]]+)?CONFIG_KERNEL/{sub("CONFIG_KERNEL_","CONFIG_");print}'
> $(TOPDIR)/.config >> $(LINUX_DIR)/.config.target
> + awk
> '/^(#[[:space:]]+)?CONFIG_KERNEL/{sub("CONFIG_KERNEL_","CONFIG_");print}'
> $(TARGET_CONFIG) >> $(LINUX_DIR)/.config.target
> echo "# CONFIG_KALLSYMS_EXTRA_PASS is not set" >>
> $(LINUX_DIR)/.config.target
> echo "# CONFIG_KALLSYMS_ALL is not set" >> $(LINUX_DIR)/.config.target
> echo "CONFIG_KALLSYMS_UNCOMPRESSED=y" >> $(LINUX_DIR)/.config.target
> - $(SCRIPT_DIR)/metadata.pl kconfig $(TMP_DIR)/.packageinfo
> $(TOPDIR)/.config $(KERNEL_PATCHVER) > $(LINUX_DIR)/.config.override
> + $(SCRIPT_DIR)/metadata.pl kconfig $(TMP_DIR)/.packageinfo
> $(TARGET_CONFIG) $(KERNEL_PATCHVER) > $(LINUX_DIR)/.config.override
> $(SCRIPT_DIR)/kconfig.pl 'm+' '+' $(LINUX_DIR)/.config.target
> /dev/null $(LINUX_DIR)/.config.override > $(LINUX_DIR)/.config.set
> $(call Kernel/SetNoInitramfs)
> rm -rf $(KERNEL_BUILD_DIR)/modules
> diff --git a/include/toplevel.mk b/include/toplevel.mk
> index 9709302..2d45c9c 100644
> --- a/include/toplevel.mk
> +++ b/include/toplevel.mk
> @@ -58,7 +58,7 @@ else
> endif
>
> ifeq ($(FORCE),)
> - .config scripts/config/conf scripts/config/mconf:
> staging_dir/host/.prereq-build
> + $(TARGET_CONFIG) scripts/config/conf scripts/config/mconf:
> staging_dir/host/.prereq-build
> endif
>
> SCAN_COOKIE?=$(shell echo $$$$)
> @@ -90,10 +90,10 @@ prepare-tmpinfo: FORCE
> ./scripts/metadata.pl package_subdirs tmp/.packageinfo >
> tmp/.packagesubdirs || { rm -f tmp/.packagesubdirs; false; }
> touch $(TOPDIR)/tmp/.build
>
> -.config: ./scripts/config/conf $(if
> $(CONFIG_HAVE_DOT_CONFIG),,prepare-tmpinfo)
> - @+if [ \! -e .config ] || ! grep CONFIG_HAVE_DOT_CONFIG .config
> >/dev/null; then \
> - [ -e $(HOME)/.openwrt/defconfig ] && cp
> $(HOME)/.openwrt/defconfig .config; \
> - $(_SINGLE)$(NO_TRACE_MAKE) menuconfig $(PREP_MK); \
> +$(TARGET_CONFIG): ./scripts/config/conf $(if
> $(CONFIG_HAVE_DOT_CONFIG),,prepare-tmpinfo)
> + @+if [ \! -e $(TARGET_CONFIG) ] || ! grep CONFIG_HAVE_DOT_CONFIG
> $(TARGET_CONFIG) >/dev/null; then \
> + [ -e $(HOME)/.openwrt/defconfig ] && cp
> $(HOME)/.openwrt/defconfig $(TARGET_CONFIG); \
> + $(NO_TRACE_MAKE) menuconfig $(PREP_MK); \
> fi
>
> scripts/config/mconf:
> @@ -105,15 +105,16 @@ scripts/config/conf:
> @$(_SINGLE)$(SUBMAKE) -s -C scripts/config conf CC="$(HOSTCC_WRAPPER)"
>
> config: scripts/config/conf prepare-tmpinfo FORCE
> - $< Config.in
> + KCONFIG_CONFIG=$(TARGET_CONFIG) $< Config.in
>
> config-clean: FORCE
> $(_SINGLE)$(NO_TRACE_MAKE) -C scripts/config clean
>
> defconfig: scripts/config/conf prepare-tmpinfo FORCE
> - touch .config
> - @if [ -e $(HOME)/.openwrt/defconfig ]; then cp
> $(HOME)/.openwrt/defconfig .config; fi
> - $< --defconfig=.config Config.in
> + touch $(TARGET_CONFIG)
> + @if [ -e $(HOME)/.openwrt/defconfig ]; then cp
> $(HOME)/.openwrt/defconfig $(TARGET_CONFIG); fi
> + $< --defconfig=$(TARGET_CONFIG) Config.in
> + [ -f .config ] && mv .config $(TARGET_CONFIG)
>
> confdefault-y=allyes
> confdefault-m=allmod
> @@ -121,15 +122,15 @@ confdefault-n=allno
> confdefault:=$(confdefault-$(CONFDEFAULT))
>
> oldconfig: scripts/config/conf prepare-tmpinfo FORCE
> - $< --$(if $(confdefault),$(confdefault),old)config Config.in
> + KCONFIG_CONFIG=$(TARGET_CONFIG) $< --$(if
> $(confdefault),$(confdefault),old)config Config.in
>
> menuconfig: scripts/config/mconf prepare-tmpinfo FORCE
> - if [ \! -e .config -a -e $(HOME)/.openwrt/defconfig ]; then \
> + if [ \! -e $(TARGET_CONFIG) -a -e $(HOME)/.openwrt/defconfig ]; then \
> cp $(HOME)/.openwrt/defconfig .config; \
> fi
> - $< Config.in
> + KCONFIG_CONFIG=$(TARGET_CONFIG) $< Config.in
>
> -prepare_kernel_conf: .config FORCE
> +prepare_kernel_conf: $(TARGET_CONFIG) FORCE
>
> ifeq ($(wildcard staging_dir/host/bin/quilt),)
> prepare_kernel_conf:
> @@ -142,7 +143,7 @@ kernel_oldconfig: prepare_kernel_conf
> $(_SINGLE)$(NO_TRACE_MAKE) -C target/linux oldconfig
>
> kernel_menuconfig: prepare_kernel_conf
> - $(_SINGLE)$(NO_TRACE_MAKE) -C target/linux menuconfig
> + $(MAKE) -C target/linux menuconfig
>
> kernel_nconfig: prepare_kernel_conf
> $(_SINGLE)$(NO_TRACE_MAKE) -C target/linux nconfig
> @@ -165,16 +166,16 @@ staging_dir/host/.prereq-build: include/
> prereq-build.mk
> printdb: FORCE
> @$(_SINGLE)$(NO_TRACE_MAKE) -p $@ V=99 DUMP_TARGET_DB=1 2>&1
>
> -download: .config FORCE
> +download: $(TARGET_CONFIG) FORCE
> @+$(SUBMAKE) tools/download
> @+$(SUBMAKE) toolchain/download
> @+$(SUBMAKE) package/download
> @+$(SUBMAKE) target/download
>
> -clean dirclean: .config
> +clean dirclean: $(TARGET_CONFIG)
> @+$(SUBMAKE) -r $@
>
> -prereq:: prepare-tmpinfo .config
> +prereq:: prepare-tmpinfo $(TARGET_CONFIG)
> @+$(NO_TRACE_MAKE) -r -s $@
>
> WARN_PARALLEL_ERROR = $(if $(BUILD_LOG),,$(and $(filter
> -j,$(MAKEFLAGS)),$(findstring s,$(OPENWRT_VERBOSE))))
> @@ -183,7 +184,7 @@ ifeq ($(SDK),1)
>
> %::
> @+$(PREP_MK) $(NO_TRACE_MAKE) -r -s prereq
> - @./scripts/config/conf --defconfig=.config Config.in
> + @./scripts/config/conf --defconfig=$(TARGET_CONFIG) Config.in
> @+$(ULIMIT_FIX) $(SUBMAKE) -r $@
>
> else
> @@ -191,9 +192,9 @@ else
> %::
> @+$(PREP_MK) $(NO_TRACE_MAKE) -r -s prereq
> @( \
> - cp .config tmp/.config; \
> + cp $(TARGET_CONFIG) tmp/.config; \
> ./scripts/config/conf --defconfig=tmp/.config -w tmp/.config
> Config.in > /dev/null 2>&1; \
> - if ./scripts/kconfig.pl '>' .config tmp/.config | grep -q
> CONFIG; then \
> + if ./scripts/kconfig.pl '>' $(TARGET_CONFIG) tmp/.config | grep
> -q CONFIG; then \
> printf "$(_R)WARNING: your configuration is out of sync.
> Please run make menuconfig, oldconfig or defconfig!$(_N)\n" >&2; \
> fi \
> )
> @@ -232,7 +233,7 @@ distclean:
> @$(_SINGLE)$(SUBMAKE) -C scripts/config clean
>
> ifeq ($(findstring v,$(DEBUG)),)
> - .SILENT: symlinkclean clean dirclean distclean config-clean download
> help tmpinfo-clean .config scripts/config/mconf scripts/config/conf
> menuconfig staging_dir/host/.prereq-build tmp/.prereq-package
> prepare-tmpinfo
> + .SILENT: symlinkclean clean dirclean distclean config-clean download
> help tmpinfo-clean $(TARGET_CONFIG) scripts/config/mconf
> scripts/config/conf menuconfig staging_dir/host/.prereq-build
> tmp/.prereq-package prepare-tmpinfo
> endif
> .PHONY: help FORCE
> .NOTPARALLEL:
> diff --git a/package/Makefile b/package/Makefile
> index 1a78fde..acc2307 100644
> --- a/package/Makefile
> +++ b/package/Makefile
> @@ -184,7 +184,8 @@ $(curdir)/preconfig:
>
> $(curdir)/flags-install:= -j1
>
> -$(eval $(call stampfile,$(curdir),package,prereq,.config))
> +#$(eval $(call stampfile,$(curdir),package,prereq,.config))
> +$(eval $(call stampfile,$(curdir),package,prereq,$(TARGET_CONFIG)))
> $(eval $(call stampfile,$(curdir),package,cleanup,$(TMP_DIR)/.build))
> $(eval $(call stampfile,$(curdir),package,compile,$(TMP_DIR)/.build))
> $(eval $(call stampfile,$(curdir),package,install,$(TMP_DIR)/.build))
> diff --git a/package/utils/busybox/Makefile
> b/package/utils/busybox/Makefile
> index 6a55d56..c31b857 100644
> --- a/package/utils/busybox/Makefile
> +++ b/package/utils/busybox/Makefile
> @@ -27,7 +27,7 @@ PKG_LICENSE_FILES:=LICENSE archival/libarchive/bz/LICENSE
> include $(INCLUDE_DIR)/package.mk
>
> ifeq ($(DUMP),)
> - STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell $(SH_FUNC) grep
> '^CONFIG_BUSYBOX_' $(TOPDIR)/.config | md5s)
> + STAMP_CONFIGURED:=$(strip $(STAMP_CONFIGURED))_$(shell $(SH_FUNC) grep
> '^CONFIG_BUSYBOX_' $(TARGET_CONFIG) | md5s)
> endif
>
> ifneq ($(findstring c,$(OPENWRT_VERBOSE)),)
> @@ -62,7 +62,7 @@ export KCONFIG_NOTIMESTAMP=1
>
> define Build/Configure
> rm -f $(PKG_BUILD_DIR)/.configured*
> - grep 'CONFIG_BUSYBOX_$(BUSYBOX_SYM)' $(TOPDIR)/.config | sed -e
> "s,\\(# \)\\?CONFIG_BUSYBOX_$(BUSYBOX_SYM)_\\(.*\\),\\1CONFIG_\\2,g" >
> $(PKG_BUILD_DIR)/.config
> + grep 'CONFIG_BUSYBOX_$(BUSYBOX_SYM)' $(TARGET_CONFIG) | sed -e
> "s,\\(# \)\\?CONFIG_BUSYBOX_$(BUSYBOX_SYM)_\\(.*\\),\\1CONFIG_\\2,g" >
> $(PKG_BUILD_DIR)/.config
> yes 'n' | $(MAKE) -C $(PKG_BUILD_DIR) \
> CC="$(TARGET_CC)" \
> CROSS_COMPILE="$(TARGET_CROSS)" \
> diff --git a/rules.mk b/rules.mk
> index 22807da..691b393 100644
> --- a/rules.mk
> +++ b/rules.mk
> @@ -8,8 +8,16 @@
> ifneq ($(__rules_inc),1)
> __rules_inc=1
>
> +TARGET_CONFIG?=$(TOPDIR)/.config
> +
> +ifneq ("$(wildcard $(TARGET_CONFIG))","")
> + override TARGET_CONFIG:=$(TARGET_CONFIG)
> +else
> + override TARGET_CONFIG:=$(TOPDIR)/$(TARGET_CONFIG)
> +endif
> +
> ifeq ($(DUMP),)
> - -include $(TOPDIR)/.config
> + -include $(TARGET_CONFIG)
> endif
> include $(TOPDIR)/include/debug.mk
> include $(TOPDIR)/include/verbose.mk
> diff --git a/target/Makefile b/target/Makefile
> index cb68454..c9c8e33 100644
> --- a/target/Makefile
> +++ b/target/Makefile
> @@ -12,7 +12,7 @@ $(curdir)/builddirs-install:=linux $(if
> $(CONFIG_SDK),sdk) $(if $(CONFIG_IB),ima
>
> $(curdir)/imagebuilder/install:=$(curdir)/linux/install
>
> -$(eval $(call stampfile,$(curdir),target,prereq,.config))
> +$(eval $(call stampfile,$(curdir),target,prereq,$(TARGET_CONFIG)))
> $(eval $(call stampfile,$(curdir),target,compile,$(TMP_DIR)/.build))
> $(eval $(call stampfile,$(curdir),target,install,$(TMP_DIR)/.build))
>
> diff --git a/target/linux/Makefile b/target/linux/Makefile
> index f7bbdff..95cd417 100644
> --- a/target/linux/Makefile
> +++ b/target/linux/Makefile
> @@ -10,4 +10,4 @@ include $(INCLUDE_DIR)/target.mk
> export TARGET_BUILD=1
>
> prereq clean download prepare compile install menuconfig nconfig
> oldconfig update refresh: FORCE
> - @+$(NO_TRACE_MAKE) -C $(BOARD) $@
> + @+$(NO_TRACE_MAKE) -C $(BOARD) $@
> diff --git a/target/sdk/Makefile b/target/sdk/Makefile
> index 857a6b7..7ef69db 100644
> --- a/target/sdk/Makefile
> +++ b/target/sdk/Makefile
> @@ -92,11 +92,11 @@ $(BIN_DIR)/$(SDK_NAME).tar.bz2: clean
> rm -rf \
> $(SDK_BUILD_DIR)/target/linux/*/files* \
> $(SDK_BUILD_DIR)/target/linux/*/patches*
> - ./convert-config.pl $(TOPDIR)/.config >
> $(SDK_BUILD_DIR)/Config-build.in
> + ./convert-config.pl $(TARGET_CONFIG) >
> $(SDK_BUILD_DIR)/Config-build.in
> $(CP) -L \
> $(TOPDIR)/LICENSE \
> $(TOPDIR)/rules.mk \
> - $(TOPDIR)/.config \
> + $(TARGET_CONFIG) \
> ./files/Config.in \
> ./files/Makefile \
> ./files/include/prepare.mk \
> diff --git a/toolchain/Makefile b/toolchain/Makefile
> index cd5399e..7479615 100644
> --- a/toolchain/Makefile
> +++ b/toolchain/Makefile
> @@ -53,7 +53,7 @@ endif
>
> ifndef DUMP_TARGET_DB
> ifneq ($(ARCH),)
> - $(TOOLCHAIN_DIR)/info.mk: .config
> + $(TOOLCHAIN_DIR)/info.mk: $(TARGET_CONFIG)
> @for dir in $(TOOLCHAIN_DIR); do ( \
> $(if $(QUIET),,set -x;) \
> mkdir -p "$$dir"; \
> @@ -68,7 +68,7 @@ endif
> endif
>
> # prerequisites for the individual targets
> -$(curdir)/ := .config prereq
> +$(curdir)/ := $(TARGET_CONFIG) prereq
> $(curdir)//prepare = $(STAGING_DIR)/.prepared $(TOOLCHAIN_DIR)/info.mk
> $(tools/stamp-install)
> $(curdir)//compile = $(1)/prepare
> $(curdir)//install = $(1)/compile
> diff --git a/tools/Makefile b/tools/Makefile
> index 187655e..64ebcbd 100644
> --- a/tools/Makefile
> +++ b/tools/Makefile
> @@ -126,7 +126,7 @@ $(curdir)//prepare = $(STAGING_DIR)/.prepared
> $(STAGING_DIR_HOST)/.prepared
> $(curdir)//compile = $(STAGING_DIR)/.prepared
> $(STAGING_DIR_HOST)/.prepared
>
> # prerequisites for the individual targets
> -$(curdir)/ := .config prereq
> +$(curdir)/ := $(TARGET_CONFIG) prereq
> $(curdir)//install = $(1)/compile
>
> tools_enabled = $(foreach tool,$(sort $(tools-y) $(tools-)),$(if $(filter
> $(tool),$(tools-y)),y,n))
>
>
>
>
>
>
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20160320/945835c8/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list