May 2015 Archives by thread

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...

Starting: Fri May 1 01:58:22 EDT 2015
Ending: Sun May 31 18:08:21 EDT 2015
Messages: 560

• [OpenWrt-Devel] [PATCH] ustream-ssl: correct year in PKG_VERSION string   Hannu Nyman
• [OpenWrt-Devel] [PATCH] generic: add linux 4.1-rc1 support   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] generic: add linux 4.1-rc1 support   Hauke Mehrtens
    • [OpenWrt-Devel] [PATCH] generic: add linux 4.1-rc1 support   Dirk Neukirchen
      • [OpenWrt-Devel] [PATCH] generic: add linux 4.1-rc1 support   Hauke Mehrtens
  • [OpenWrt-Devel] [PATCH] generic: add linux 4.1-rc1 support   Hauke Mehrtens
• [PATCH] header: add possible_{write,read}_pnet() on kernel >= 4.1   Hauke Mehrtens
• [OpenWrt-Devel] wrong configured spam-filter for openwrt-dev   edgar.soldin at web.de
  • [OpenWrt-Devel] wrong configured spam-filter for openwrt-dev   Javier Domingo Cansino
• [OpenWrt-Devel] [PATCH] kernel: fix uninitialised variable causing 1-wire to not bind to GPIO   Andrew McDonnell
  • [OpenWrt-Devel] [PATCH] kernel: fix uninitialised variable causing 1-wire to not bind to GPIO   Felix Fietkau
• [OpenWrt-Devel] [RFC PATCH] ar71xx: Support Antminer S1/S3   Dirk Neukirchen
  • [OpenWrt-Devel] [RFC PATCH] ar71xx: Support Antminer S1/S3   James Hilliard
    • [OpenWrt-Devel] [RFC PATCH] ar71xx: Support Antminer S1/S3   Felix Fietkau
      • [OpenWrt-Devel] [RFC PATCH] ar71xx: Support Antminer S1/S3   James Hilliard
• [OpenWrt-Devel] [PATCH] ar71xx: fix 82_patch_ath10k   Stijn Tintel
• [OpenWrt-Devel] [PATCH 2/2] ipq806x: add support for zImage kernel   Jonas Gorski
• [OpenWrt-Devel] Fwd: Re: [PATCH 10/10] brcmfmac: Add support for multiple PCIE devices in nvram.   Hante Meuleman
• [OpenWrt-Devel] Thoughts on shellcheck?   Eric Schultz
  • [OpenWrt-Devel] Thoughts on shellcheck?   Bastian Bittorf
• [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
  • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Johannes Berg
    • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Johannes Berg
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Johannes Berg
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Johannes Berg
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   olewales
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Sylwester Petela
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Martin Blumenstingl
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
      • [OpenWrt-Devel] lantiq DSL drivers / firmware info   Aleksander Wałęski
• [OpenWrt-Devel] [PATCH] ar71xx/image: move TPLINK-LZMA image to new build code v2   Alexander Couzens
• [OpenWrt-Devel] [PATCH] firewall: Allow MLD input on WAN   Linus Lüssing
  • [OpenWrt-Devel] [PATCH] firewall: Allow MLD input on WAN   Steven Barth
    • [OpenWrt-Devel] [PATCH] firewall: Allow MLD input on WAN   Linus Lüssing
• [OpenWrt-Devel] [PATCH] modules: package l2tp_ip6.ko in kmod-l2tp-ip6   Daniel Golle
  • [OpenWrt-Devel] [PATCH] modules: package l2tp_ip6.ko in kmod-l2tp-ip6   Steven Barth
    • [OpenWrt-Devel] [PATCH] modules: package l2tp_ip6.ko in kmod-l2tp-ip6   Daniel Golle
      • [OpenWrt-Devel] [PATCH] modules: package l2tp_ip6.ko in kmod-l2tp-ip6   Steven Barth
      • [OpenWrt-Devel] [PATCH] netsupport: l2tp-ip: only depend on IPv6 if IPv6 support is enabled   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] ncdu: update to 1.11   Charles Lehner
  • [OpenWrt-Devel] [PATCH 1/2] ncdu: update to 1.11   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] ncdu: optimize build   Charles Lehner
• [OpenWrt-Devel] Unable to setup point to point network between two openwrt boards   udit gupta
• [OpenWrt-Devel] [PATCH] generic/4.0: update to 4.0.1   Daniel Golle
• [OpenWrt-Devel] [PATCH] firewall: Allow IGMP and MLD input on WAN   Linus Lüssing
• [OpenWrt-Devel] Archer VR200v GPL code   Daniel Golle
  • [OpenWrt-Devel] Archer VR200v GPL code   Mirko Parthey
• [OpenWrt-Devel] [PATCH] tools/mkimage: backport gcc5 compatibility, patch   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] tools/mkimage: backport gcc5 compatibility, patch   Hauke Mehrtens
• [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Heiner Kallweit
  • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Wojciech Dubowik
    • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Heiner Kallweit
      • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Heiner Kallweit
      • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Wojciech Dubowik
      • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Heiner Kallweit
      • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Wojciech Dubowik
      • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Felix Fietkau
      • [OpenWrt-Devel] Device tree issues with TL-WDR4900 (mpc85xx) and kernel 4.0.1   Wojciech Dubowik
• [OpenWrt-Devel] Intermittent Ethernet failure   Bill
  • [OpenWrt-Devel] Intermittent Ethernet failure   Daniel Golle
    • [OpenWrt-Devel] Intermittent Ethernet failure   Bill
• [OpenWrt-Devel] [Patch V2 1/2] ipq806x: fix boot freeze on zImage kernel   Mathieu Olivari
  • [OpenWrt-Devel] [Patch V2 2/2] ipq806x: add support for zImage kernel   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] ipq806x: add pcie support to ipq806x based platforms   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] [package] trace-cmd: update to 2.4.2   Dirk Neukirchen
• [OpenWrt-Devel] Trac down   Eric Schultz
• [OpenWrt-Devel] [PATCH 1/4] kernel: mips jump only works with memory less then 256mb. when enable HIGHMEM use long jump   wengbj
  • [OpenWrt-Devel] [PATCH 2/4] ralink: add HIGHMEM support for mt7621   wengbj
  • [OpenWrt-Devel] [PATCH 3/4] ralink: add mt7621 support automatic recognition memory size(32M-512M)   wengbj
    • [OpenWrt-Devel] [PATCH 3/4] ralink: add mt7621 support automatic recognition memory size(32M-512M)   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 4/4] ralink: firewrt support memory detect   wengbj
  • [OpenWrt-Devel] [PATCH 1/4] kernel: mips jump only works with memory less then 256mb. when enable HIGHMEM use long jump   John Crispin
  • [OpenWrt-Devel] [PATCH 1/4] kernel: mips jump only works with memory less then 256mb. when enable HIGHMEM use long jump   Felix Fietkau
• [OpenWrt-Devel] [PATCH] ralink: add mt7621 support automatic recognition memory size(32M-512M)   wengbj
• [OpenWrt-Devel] [PATCH procd] hotplug: support for interval commands   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH procd] hotplug: support for interval commands   Felix Fietkau
  • [OpenWrt-Devel] [PATCH V2 procd] hotplug: support for interval commands   Rafał Miłecki
• [OpenWrt-Devel] xl2tpd in squash not recognized in Luci   Jakub Jančo
• [OpenWrt-Devel] ddns default config values broken?   Henning Schild
  • [OpenWrt-Devel] ddns default config values broken?   Christian Schoenebeck
    • [OpenWrt-Devel] ddns default config values broken?   Henning Schild
      • [OpenWrt-Devel] ddns default config values broken?   Christian Schoenebeck
      • [OpenWrt-Devel] ddns default config values broken?   Henning Schild
      • [OpenWrt-Devel] ddns default config values broken?   Christian Schoenebeck
      • [OpenWrt-Devel] ddns default config values broken?   Henning Schild
• [OpenWrt-Devel] [PATCH] [iwinfo] Allow non-negative RSSI reading   Dmitry Ivanov
• [OpenWrt-Devel] [PATCH] [rpcd] Allow non-negative RSSI reading   Dmitry Ivanov
• [OpenWrt-Devel] [PATCH] build: don't call prereq for any package/symlinks rules   Felix Fietkau
• [OpenWrt-Devel] Patch to fix broken DHCP renewals with metric for AA   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [libubox][v4] b64: add base64 support   Felix Fietkau
• [OpenWrt-Devel] [PATCH 0/2] firewall3: add support for IPv6 NAT (i.e. masquerading)   Lars
  • [OpenWrt-Devel] [PATCH 0/2] firewall3: add support for IPv6 NAT (i.e. masquerading)   Lars
  • [OpenWrt-Devel] [PATCH v2 0/2] firewall3: add support for IPv6 NAT (i.e. masquerading)   Lars Gierth
    • [OpenWrt-Devel] [PATCH v2 1/2] firewall3: add masq6 option for IPv6 masquerading   Lars Gierth
    • [OpenWrt-Devel] [PATCH v2 2/2] firewall3: remove IPv4-only restriction for NAT   Lars Gierth
• [OpenWrt-Devel] [PATCH 1/2] firewall3: add masq6 option for IPv6 masquerading   Lars
• [OpenWrt-Devel] [PATCH 2/2] firewall3: remove IPv4-only restriction for NAT   Lars
• [OpenWrt-Devel] [PATCH] kirkwood: add support for the Seagate GoflexHome   L. D. Pinney
• [OpenWrt-Devel] [PATCH] TP-LINK Archer C7 () JFFS2 only 5GHz fix   Spencer Thomason
  • [OpenWrt-Devel] [PATCH] TP-LINK Archer C7 () JFFS2 only 5GHz fix   Felix Fietkau
• [OpenWrt-Devel] [Patch V2] build: don't call prereq for any package/symlinks rules   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] brcm63xx: Add Huawei HG655b support   dani
  • [OpenWrt-Devel] [PATCH] brcm63xx: Add Huawei HG655b support   Cezary Jackiewicz
    • [OpenWrt-Devel] [PATCH] brcm63xx: Add Huawei HG655b support   Jonas Gorski
• [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Thomas Strobel
  • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Felix Fietkau
    • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Thomas Strobel
      • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Felix Fietkau
      • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Thomas Strobel
      • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Felix Fietkau
      • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Thomas Strobel
      • [OpenWrt-Devel] Remove requirement of an absolute path to the perl interpreter   Felix Fietkau
• [OpenWrt-Devel] [PATCH] toolchain: change default emulation for mips64 (octeon) to n64   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] fuse: fix build on arm64   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] ar71xx: Add support for the Meraki MR12 & MR16   Chris Blake
  • [OpenWrt-Devel] [PATCH] ar71xx: Add support for the Meraki MR12 & MR16   Christian Mehlis
  • [OpenWrt-Devel] [PATCH] ar71xx: Add support for the Meraki MR12 & MR16   Chris Blake
• [OpenWrt-Devel] [PATCH RFC] base-files: switch reset button support to hotplug.d   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH RFC] base-files: switch reset button support to hotplug.d   Felix Fietkau
    • [OpenWrt-Devel] [PATCH RFC] base-files: switch reset button support to hotplug.d   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] mtd: correct/change warning text about partition split / read-only status   Felix Fietkau
  • [OpenWrt-Devel] [PATCH] mtd: correct/change warning text about partition split / read-only status   Hannu Nyman
• [OpenWrt-Devel] [PATCH] lantiq: add platform_pre_upgrade for sysupgrade   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH V2] lantiq: add platform_pre_upgrade for sysupgrade   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] Makefile: remove non-existent STAGING_DIR_TOOLCHAIN from dirclean   Hannu Nyman
• [OpenWrt-Devel] [PATCH] ar71xx: add support for compex wpj531   Christian Mehlis
• [OpenWrt-Devel] [PATCH 1/3] [rpcd][v2] file: add support for base64   Luka Perkov
  • [OpenWrt-Devel] [PATCH 2/3] [rpcd][v2] file: add support for setting mode when writing files   Luka Perkov
  • [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: be consistent with string termination character   Luka Perkov
  • [OpenWrt-Devel] [PATCH 1/3] [rpcd][v2] file: add support for base64   Felix Fietkau
    • [OpenWrt-Devel] [PATCH 1/3] [rpcd][v2] file: add support for base64   Luka Perkov
      • [OpenWrt-Devel] [PATCH 1/3] [rpcd][v2] file: add support for base64   Felix Fietkau
• [OpenWrt-Devel] uhttpd / startup-error without a message   Bastian Bittorf
  • [OpenWrt-Devel] uhttpd / startup-error without a message   Jo-Philipp Wich
    • [OpenWrt-Devel] uhttpd / startup-error without a message   Jo-Philipp Wich
      • [OpenWrt-Devel] uhttpd / startup-error without a message / procd interactive logging   Bastian Bittorf
      • [OpenWrt-Devel] uhttpd / startup-error without a message / procd interactive logging   Jo-Philipp Wich
      • [OpenWrt-Devel] uhttpd / startup-error without a message / procd interactive logging   Bastian Bittorf
    • [OpenWrt-Devel] uhttpd / startup-error without a message   Bastian Bittorf
• [OpenWrt-Devel] [RESEND][PATCH] Fix uninitialised variable causing 1-wire to not bind to GPIO   Andrew McDonnell
• [OpenWrt-Devel] [PATCH] netifd: Support for configurable default packet steering   Hans Dedecker
  • [OpenWrt-Devel] [PATCH] netifd: Support for configurable default packet steering   Steven Barth
    • [OpenWrt-Devel] [PATCH] netifd: Support for configurable default packet steering   Hans Dedecker
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Matthias Schiffer
  • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
    • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Kirill Berezin
  • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
    • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Kirill Berezin
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   David Hutchison
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Kirill Berezin
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
      • [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Kirill Berezin
      • [OpenWrt-Devel] ar71xx: How to integrate UniFi AP Outdoor Plus HSR?   Stefan Rompf
      • [OpenWrt-Devel] ar71xx: How to integrate UniFi AP Outdoor Plus HSR?   Kirill Berezin
• [OpenWrt-Devel] [PATCH] lantiq: Fix PCIe bus when PCI is also enabled.   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] ar71xx: Add pll_1000 value for eth0   Roger Pueyo Centelles
  • [OpenWrt-Devel] [PATCH] ar71xx: Add pll_1000 value for eth0 to Ubiquiti Rocket M XW   Roger Pueyo Centelles
• [OpenWrt-Devel] [PATCH 1/3] file: add support for base64   Luka Perkov
  • [OpenWrt-Devel] [PATCH 2/3] file: add support for setting mode when writing files   Luka Perkov
  • [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: be consistent with string termination character   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/3][rpcd][v4] file: add support for base64   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset handling   Nikolay Martynov
  • [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset handling   John Crispin
    • [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset handling   Nikolay Martynov
      • [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset handling   Hauke Mehrtens
      • [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset handling   Russell Senior
• [OpenWrt-Devel] [PATCH] usb: cleanup remove old module names   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] usb: another cleanup: remove ancient module names   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] sound: cleanup by removing unsupported Kernel cases   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] Vlan configuration, limit the used ports   Hante Meuleman
  • [OpenWrt-Devel] [PATCH] Vlan configuration, limit the used ports   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] Vlan configuration, limit the used ports   Rafał Miłecki
• [OpenWrt-Devel] NVRAM > 32K   Hante Meuleman
• [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Hante Meuleman
  • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Hante Meuleman
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Hante Meuleman
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Hante Meuleman
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Arend van Spriel
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] Give WiFi modules more time to settle   Arend van Spriel
• [OpenWrt-Devel] [PATCH][v2] netifd: Support for configurable default packet steering behavior   Hans Dedecker
  • [OpenWrt-Devel] [PATCH][v2] netifd: Support for configurable default packet steering behavior   Steven Barth
• [OpenWrt-Devel] [PATCH] scripts/feeds: Return non-zero return code if updating of a feed failed.   Martin Strbacka
  • [OpenWrt-Devel] [PATCH] scripts/feeds: Return non-zero return code if updating of a feed failed.   Hannu Nyman
  • [OpenWrt-Devel] [PATCH] scripts/feeds: Return non-zero return code if updating of a feed failed.   John Crispin
    • [OpenWrt-Devel] [PATCH] scripts/feeds: Return non-zero return code if updating of a feed failed.   Hannu Nyman
    • [OpenWrt-Devel] [PATCH] scripts/feeds: Return non-zero return code if updating of a feed failed.   Hannu Nyman
    • [OpenWrt-Devel] [PATCH] scripts/feeds: Return non-zero return code if updating of a feed failed.   Martin Strbačka
• [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Hante Meuleman
  • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Ian Kent
      • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Ian Kent
    • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Hante Meuleman
      • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH] bcm53xx: Add functions to get/release copies of nvram contents.   Felix Fietkau
• [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Jakub Jančo
  • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Conor O'Gorman
    • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Hans Dedecker
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Jakub Jančo
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Hans Dedecker
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Jakub Jančo
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Hans Dedecker
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Jakub Jančo
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Conor O'Gorman
      • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Jakub Jančo
  • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Karl Palsson
  • [OpenWrt-Devel] WAN dhcp client doesnt recognize unplugged cable and doesnt request new IP on replugged   Karl Palsson
• [OpenWrt-Devel] [PATCH] mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig   Heiner Kallweit
  • [OpenWrt-Devel] [PATCH] mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig   John Crispin
    • [OpenWrt-Devel] [PATCH] mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig   Heiner Kallweit
      • [OpenWrt-Devel] [PATCH] mpc85xx: TL-WDR4900: Fix port 6 being shown as up (10MBit/half) in LUCI/swconfig   John Crispin
• [OpenWrt-Devel] [PATCH] [package] ubus: fix memory leak problem   陈斌
• [OpenWrt-Devel] [PATCH] ralink: add support for ap699ge8c2   Cristian Morales Vega
  • [OpenWrt-Devel] [PATCHv2] ralink: add support for ap699ge8c2   Cristian Morales Vega
    • [OpenWrt-Devel] [PATCHv2] ralink: add support for ap699ge8c2   John Crispin
      • [OpenWrt-Devel] [PATCHv2] ralink: add support for ap699ge8c2   Cristian Morales Vega
• [OpenWrt-Devel] regarding patch "lldpd: update to version 0.7.14"   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 2/3] rpcd, iwinfo: add support for vendor_elements   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 1/3] iwinfo, nl80211: add support for vendor_elements   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 3/3] hostapd: allow to set vendor_elements via /etc/config/wireless   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] scripts/feeds: Delete package/feeds folder in the clean procedure to prevent dangling links.   Martin Strbacka
• [OpenWrt-Devel] [PATCH] ramips: Adding support for AXIMCom MR-102N 3G/4G Travel Mobile Router   Tai-hwa Liang
• [OpenWrt-Devel] [RFC] [PATCH] build: honor command line CONFIG_ variables on kernel_*config targets   Emmanuel Deloget
  • [OpenWrt-Devel] [RFC] [PATCH] build: honor command line CONFIG_ variables on kernel_*config targets   Felix Fietkau
• [OpenWrt-Devel] External (public) IP forwarded to internal LAN   Angelo Corsaro
  • [OpenWrt-Devel] External (public) IP forwarded to internal LAN   Lars Kruse
  • [OpenWrt-Devel] External (public) IP forwarded to internal LAN   Angelo Corsaro
    • [OpenWrt-Devel] External (public) IP forwarded to internal LAN   Lars Kruse
• [OpenWrt-Devel] [PATCH] include/scan.mk: Add -a argument to the grep to treat all Makefiles as a text file.   Martin Strbacka
• [OpenWrt-Devel] procd: "failed to symlink /tmp -> /var" - creation of this symlink in procd needed?   Heiner Kallweit
• [OpenWrt-Devel] Question on compiling a wifi driver getting: CONFIG_CFG80211 nor CONFIG_CFG80211_MODULE is defined in kernel   Derek Werthmuller
• [OpenWrt-Devel] Firefly FireWrt - interesting AC1200 beast   valent.turkovic at gmail.com
• [OpenWrt-Devel] DVB tuners   Charlie Smurthwaite
  • [OpenWrt-Devel] DVB tuners   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] ralink: add support for mt7621 switch counters   Cristian Morales Vega
  • [OpenWrt-Devel] [PATCH] ralink: add support for mt7621 switch counters   John Crispin
    • [OpenWrt-Devel] [PATCH] ralink: add support for mt7621 switch counters   Cristian Morales Vega
  • [OpenWrt-Devel] [PATCHv2] ralink: add support for mt7621 switch counters   Cristian Morales Vega
• [OpenWrt-Devel] External (public) IP forwarded to internal LAN [SOLVED]   Angelo Corsaro
  • [OpenWrt-Devel] External (public) IP forwarded to internal LAN [SOLVED]   Lars Kruse
• [OpenWrt-Devel] Help required for RT2860 Wireless Driver Configuration   Anil Kumar Maguluri
• [PATCH] buildroot: improve git submodule handling for packages   Darik Horn
• [PATCH] buildroot: improve git submodule handling for packages=0A=   Darik Horn
• [OpenWrt-Devel] [PATCH] buildroot: improve git submodule handling for packages   Darik Horn
• [OpenWrt-Devel] ralink target, ehci not working, all the devices get detected at ohci controller   hackru
• [OpenWrt-Devel] Managed WiFi and IPv4/IPv6   Cristian Morales Vega
  • [OpenWrt-Devel] Managed WiFi and IPv4/IPv6   Felix Fietkau
    • [OpenWrt-Devel] Managed WiFi and IPv4/IPv6   Cristian Morales Vega
• [OpenWrt-Devel] [PATCH] lantiq: Fix initialization of the PCI IRQs when PCIe is also enabled   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH] lantiq: Fix initialization of the PCI IRQs when PCIe is also enabled   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 0/6] Improve ASUS RT-AC87U support   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH 1/6] bcm53xx: refresh patches   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH 2/6] bcm53xx: enable RT-AC87U UART console   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH 3/6] bcm53xx: bcm_nand: add support for overriding partition probe through device tree   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH 3/6] bcm53xx: bcm_nand: add support for overriding partition probe through device tree   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Hauke Mehrtens
      • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Álvaro Fernández Rojas
      • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Bjørn Mork
    • [OpenWrt-Devel] [PATCH 4/6] bcm53xx: bcm47xxpart: add support for parsing device tree partitions   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 5/6] bcm53xx: add ASUS RT-AC87U partitions   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH 5/6] bcm53xx: add ASUS RT-AC87U partitions   Rafał Miłecki
  • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: add ASUS RT-AC87U LEDs   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH 6/6] bcm53xx: add ASUS RT-AC87U LEDs   Rafał Miłecki
• [OpenWrt-Devel] libqrcode   Jonathan Bennett
  • [OpenWrt-Devel] libqrcode   Yousong Zhou
    • [OpenWrt-Devel] libqrcode   Jonathan Bennett
• [OpenWrt-Devel] [PATCH] php5-pecl-dio: moved to github   Michael Heimpold
• [OpenWrt-Devel] [PATCH] php5-pecl-libevent: moved to github   Michael Heimpold
• [OpenWrt-Devel] [PATCH] php5-pecl-bcompiler: drop package   Michael Heimpold
• [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   valent.turkovic at gmail.com
  • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   valent.turkovic at gmail.com
    • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   José Vázquez
      • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   valent.turkovic at gmail.com
      • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   José Vázquez
      • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   valent.turkovic at gmail.com
      • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   Sergey Zakharchenko
      • [OpenWrt-Devel] How to track IO usage of internal flash mtd partitions?   valent.turkovic at gmail.com
• [OpenWrt-Devel] [PATCH 0/3] procd: add support for seccomp on ARM   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/3] trace: add support for ARM architecture   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/3] jail: add support for ARM architecture   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/3] jail: respect byte order when setting AUDIT_ARCH   Daniel Golle
• [OpenWrt-Devel] [BUG] ramips: LED timer trigger busted since transition from kernel 3.10.x   Russell Senior
• [OpenWrt-Devel] [PATCH] dnsmasq: bump to dnsmasq2.73rc8 Important.   Kevin Darbyshire-Bryant
  • [OpenWrt-Devel] [PATCH] dnsmasq: bump to dnsmasq2.73rc8 Important.   Steven Barth
• [OpenWrt-Devel] [BB 14.07] No automatic buildbot anymore ???   Christian Schoenebeck
  • [OpenWrt-Devel] [BB 14.07] No automatic buildbot anymore ???   Hannu Nyman
• [OpenWrt-Devel] [PATCH] uClibc: add signal info for seccomp related SIGSYS   Daniel Golle
• [OpenWrt-Devel] [PATCH] [PATCH] wpa-supplicant: add 802.11r client support   Stefan Hellermann
• [OpenWrt-Devel] openwrt-devel Digest, Vol 113, Issue 43   Angelo Corsaro
• [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N   Matt Goring
  • [OpenWrt-Devel] [PATCH] [brcm63xx] Add support for Plusnet 2704N   Jonas Gorski
• [OpenWrt-Devel] (no subject)   Alison C.
• [OpenWrt-Devel] [PATCH 0/5] perf: fix dependencies & restore uClibc compatibility   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 1/5] uClibc: elf: Add STT_GNU_IFUNC from glibc   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 2/5] argp-standalone: import package from packages.git   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Mathieu Olivari
    • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Luiz Angelo Daros de Luca
      • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Mathieu Olivari
      • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Mathieu Olivari
      • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Jiri Slachta
      • [OpenWrt-Devel] [PATCH 3/5] elfutils: import package from packages.git   Luiz Angelo Daros de Luca
  • [OpenWrt-Devel] [PATCH 4/5] bzip2: import package from packages.git   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 5/5] perf: remove EGLIBC dependency   Mathieu Olivari
• [OpenWrt-Devel] Patch file for QCA8334 eth switch chip   nam228
  • [OpenWrt-Devel] Patch file for QCA8334 eth switch chip   Heiner Kallweit
• [OpenWrt-Devel] [PATCH] generic/4.0: update to 4.0.4   Daniel Golle
  • [OpenWrt-Devel] [PATCH v2] generic/4.0: update to 4.0.4   Daniel Golle
    • [OpenWrt-Devel] [PATCH v2] generic/4.0: update to 4.0.4   Imre Kaloz
• [OpenWrt-Devel] linux / overlay / OpenWrt / problems with full working dir   Bastian Bittorf
• ovl: mount read-only if workdir can't be created   Miklos Szeredi
• [OpenWrt-Devel] [PATCH 0/6] netifd: workaround for shell protocols without proto_task.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 1/6] Changes for more readability.   Yousong Zhou
    • [OpenWrt-Devel] [PATCH 1/6] Changes for more readability.   Felix Fietkau
  • [OpenWrt-Devel] [PATCH 2/6] system: fix typo in returning address length.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 3/6] interface: remove redundant iface_attr_info.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 4/6] interface: minor fix for unnecessary ++ operation.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 5/6] proto-shell: allow running protocols without proto_task.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 6/6] interface: teardown on l3_dev link lost.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 0/6] netifd: workaround for shell protocols without proto_task.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Christian Mehlis
    • [OpenWrt-Devel] [PATCH] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
• [OpenWrt-Devel] JFFS2 padding value   Cristian Morales Vega
• [OpenWrt-Devel] [PATCH] ramips: check size after padding   Cristian Morales Vega
• [OpenWrt-Devel] Trac / disk-full? (error while writing to spool file)   Bastian Bittorf
• [OpenWrt-Devel] protobuf broken in BB   Guillaume Déflache
  • [OpenWrt-Devel] protobuf broken in BB   Guillaume Déflache
• [OpenWrt-Devel] MT7620 WiFi - P2P Concurrency   Anil Kumar Maguluri
• [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Steven Barth
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc1 / git-checkout   Bastian Bittorf
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc1 / git-checkout   Jonathan Bennett
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc1 / git-checkout   John Crispin
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc1 / git-checkout   Jonathan Bennett
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   thomas.langer at lantiq.com
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Daniel Golle
  • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Michael Richardson
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Bjørn Mork
    • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Steven Barth
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Michael Richardson
      • [OpenWrt-Devel] Chaos Calmer 15.05-rc1   Steven Barth
• [OpenWrt-Devel] [PATCH] ar8216: Fix problem with AR8337 MAC swap handling   Christian Mehlis
• [OpenWrt-Devel] [PATCH] generic/4.0: fix error during kernel patch application   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH] generic/4.0: fix error during kernel patch application   Steven Barth
• [OpenWrt-Devel] [PATCH] cyassl: version bump   Daniel Gimpelevich
  • [OpenWrt-Devel] [PATCH] cyassl: version bump   Hauke Mehrtens
    • [OpenWrt-Devel] [PATCH] cyassl: version bump   Daniel Gimpelevich
• [OpenWrt-Devel] [PATCH 0/5] ipq806x: add frequency scaling support   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 1/5] ipq806x: refresh kernel patches   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 2/5] ipq806x: disable i2c device on gsbi4   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 3/5] ipq806x: add power regulators support   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 4/5] ipq806x: add & enable cpufreq support   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 5/5] ipq806x: enable cpu idle support in kernel conf   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] luci-proto-wwan minimal support   Cezary Jackiewicz
  • [OpenWrt-Devel] [PATCH] luci-proto-wwan minimal support   Adam Kuklycz
    • [OpenWrt-Devel] [PATCH] luci-proto-wwan minimal support   Aleksandr Kolesnik
• [OpenWrt-Devel] Setting LD_LIBRARY_PATH is not cool   Kirill Elagin
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] musl: update to version 1.1.9   Daniel Golle
  • [OpenWrt-Devel] [PATCH] musl: update to version 1.1.9   Felix Fietkau
    • [OpenWrt-Devel] [PATCH v2] musl: update to version 1.1.9   Daniel Golle
      • [OpenWrt-Devel] [PATCH v2] musl: update to version 1.1.9   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] musl: update to version 1.1.9   Daniel Golle
• [PATCH] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
• [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Bastian Bittorf
  • [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Jo-Philipp Wich
    • [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Jo-Philipp Wich
      • [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Bastian Bittorf
      • [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Jo-Philipp Wich
      • [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Bastian Bittorf
    • [OpenWrt-Devel] working with quilt from './staging_dir/host/bin/quilt'   Bastian Bittorf
• [OpenWrt-Devel] OpenWrt and TDD   Ronaldo Afonso
  • [OpenWrt-Devel] OpenWrt and TDD   Eric Schultz
• [OpenWrt-Devel] Snort upgrade from 2.9.7.2 -> 2.9.7.3   Derek Werthmuller
  • [OpenWrt-Devel] Snort upgrade from 2.9.7.2 -> 2.9.7.3   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] octeon: build squashfs image for UBNT ERLITE   Stijn Tintel
  • [OpenWrt-Devel] [PATCH] octeon: build squashfs image for UBNT ERLITE   Stijn Tintel
• [OpenWrt-Devel] [PATCH] conntrack-tools: add init script for conntrackd   Stijn Tintel
• [OpenWrt-Devel] [PATCH] procd: update sources   Daniel Golle
• [OpenWrt-Devel] [PATCH] Snort version bump 2.9.7.2 to 2.9.7.3   Derek Werthmuller
  • [OpenWrt-Devel] [PATCH] Snort version bump 2.9.7.2 to 2.9.7.3   Hauke Mehrtens
• [OpenWrt-Devel] [PATCH] rampis: add support for status led on ASUS RT-N14U   Matteo Panella
• [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset   Ted Hess
  • [OpenWrt-Devel] [PATCH 1/1] Fix bridge-utils file offset   Russell Senior
• [OpenWrt-Devel] [PATCH] Makefile: move cleaning of staging_dir/target* to clean instead of dirclean   Hannu Nyman
• [OpenWrt-Devel] [PATCH v2] [netifd] Changes for more readability.   Yousong Zhou
• [OpenWrt-Devel] [PATCH] sunxi: remove kernel symbol   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] sunxi: remove kernel symbol   Dirk Neukirchen
  • [OpenWrt-Devel] [PATCH] sunxi: remove kernel symbol   Felix Fietkau
    • [OpenWrt-Devel] [PATCH] sunxi: remove kernel symbol   Dirk Neukirchen
      • [OpenWrt-Devel] [PATCH] sunxi: remove kernel symbol   Felix Fietkau
• [OpenWrt-Devel] [PATCH] kernel: remove duplicate symbols   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] kernel: arm64: psci: move psci firmware calls out of line   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] sunxi: enable CONFIG_EXPERT   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] kernel: add missing symbol   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] mac80211: remove wlcore patch   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] x86: add missing symbol   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] kernel: remove and unify symbols   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] netifd: bump to current HEAD   Daniel Golle
• [OpenWrt-Devel] [PATCH] [package] opkg: Fix --force-checksum when using SHA256   Florian Fieber
• [OpenWrt-Devel] [PATCH] ncurses: Fix building with gcc 5.1   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH] ncurses: Fix building with gcc 5.1   Dirk Neukirchen
    • [OpenWrt-Devel] [PATCH] ncurses: Fix building with gcc 5.1   Martin Blumenstingl
      • [OpenWrt-Devel] [PATCH] ncurses: Fix building with gcc 5.1   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH] scripts/feeds: return error status from feed updating (alternative approach)   Hannu Nyman
• [OpenWrt-Devel] [PATCH] ar71xx: Add Support for the Bitmain Antminer S1   L. D. Pinney
• [OpenWrt-Devel] [PATCH] zram-swap: set a high priority for the swap   Juan Orti Alcaine
  • [OpenWrt-Devel] [PATCH] zram-swap: set a high priority for the swap   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH v2] zram-swap: set a high priority for the swap   Juan Orti Alcaine
  • [OpenWrt-Devel] [PATCH v2] zram-swap: set a high priority for the swap   Juan Orti Alcaine
    • [OpenWrt-Devel] [PATCH v2] zram-swap: set a high priority for the swap   Juan Orti Alcaine
• [OpenWrt-Devel] Uci event on config change   Florian Eckert
• [OpenWrt-Devel] Introducing "fastpath" - Kernel module for speeding up IP forwarding   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 0/4] uci: lift 4096 bytes line length limit.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 1/4] cli: suppress printing error messages when -q is specified.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 2/4] delta: catch error when parsing delta line.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 3/4] file.c: lift the 4096 bytes line length limit.   Yousong Zhou
  • [OpenWrt-Devel] [PATCH 4/4] tests: add test case for parsing long option values.   Yousong Zhou
• [OpenWrt-Devel] Add for Planex MZK-DP150N   ＠SRCHACK.ORG
• [OpenWrt-Devel] ath9k_htc: Target is unresponsive   Luca Olivetti
  • [OpenWrt-Devel] ath9k_htc: Target is unresponsive   Bruno Randolf
    • [OpenWrt-Devel] ath9k_htc: Target is unresponsive   Luca Olivetti
      • [OpenWrt-Devel] ath9k_htc: Target is unresponsive   Caleb James DeLisle
      • [OpenWrt-Devel] ath9k_htc: Target is unresponsive   Luca Olivetti
      • [OpenWrt-Devel] ath9k_htc: Target is unresponsive   Luca Olivetti
• [OpenWrt-Devel] Implementation of restarting wifi(hostapd) when it stop unexpectedly   Tymon
  • [OpenWrt-Devel] Implementation of restarting wifi(hostapd) when it stop unexpectedly   Felix Fietkau
    • [OpenWrt-Devel] Implementation of restarting wifi(hostapd) whenit stop unexpectedly   Tymon
• [OpenWrt-Devel] [PATCH] netifd: Add old style vlan devices to device list   Hans Dedecker
• [OpenWrt-Devel] [PATCH] scripts/feeds: observe -p flag for preferential feeds   Karl Palsson
  • [OpenWrt-Devel] [PATCH] scripts/feeds: observe -p flag for preferential feeds   Felix Fietkau
• [OpenWrt-Devel] [PATCH] scripts/feeds: print the source of packages installed   Karl Palsson
  • [OpenWrt-Devel] [PATCH] scripts/feeds: print the source of packages installed   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] scripts/feeds: fix typo in copied code   Karl Palsson
• [OpenWrt-Devel] [RFT/RFC] ar71xx: fix 100/10mbps ethernet link issues on mynet range extender   Christian Lamparter
• [OpenWrt-Devel] [PATCH] kernel: bridge: backport two snooping related patches   Linus Lüssing
• [OpenWrt-Devel] [PATCH netifd] bridge: allow setting hash_max value   Linus Lüssing
• [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Richard Clark
  • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Christian Mehlis
    • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Karl Palsson
      • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Richard Clark
    • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Richard Clark
  • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Jo-Philipp Wich
    • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Richard Clark
      • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Michael Richardson
      • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Karl Palsson
    • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Gert Doering
      • [OpenWrt-Devel] Link detection - TP-Link Archer C7 v2   Christian Mehlis
• [OpenWrt-Devel] [PATCH] perf: replace libelf1 select by a depend   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH] perf: replace libelf1 select by a depend   Luiz Angelo Daros de Luca
    • [OpenWrt-Devel] [PATCH] perf: replace libelf1 select by a depend   Mathieu Olivari
      • [OpenWrt-Devel] [PATCH] perf: replace libelf1 select by a depend   Felix Fietkau
      • [OpenWrt-Devel] [PATCH] perf: replace libelf1 select by a depend   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 0/6] ipq806x: replace qca-nss-gmac by stmmac   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 1/6] ipq806x: move arm-gic include into pcie patch   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 2/6] kernel: add missing STMMAC options in generic configs   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 3/6] kernel: add stmmac as a new kernel package   Mathieu Olivari
    • [OpenWrt-Devel] [PATCH 3/6] kernel: add stmmac as a new kernel package   Daniel Golle
    • [OpenWrt-Devel] [PATCH 3/6] kernel: add stmmac as a new kernel package   Felix Fietkau
      • [OpenWrt-Devel] [PATCH 3/6] kernel: add stmmac as a new kernel package   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 4/6] ipq806x: enable kernel support for Fixed PHY emulation   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 5/6] ipq806x: replace caf nss-gmac driver by upstream stmmac   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 6/6] qca-nss-gmac: delete package   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] sysctl: read settings from /etc/sysctl.d/*.conf   Stefan Tomanek
  • [OpenWrt-Devel] [PATCH] sysctl: read settings from /etc/sysctl.d/*.conf   Jonathan Thibault
    • [OpenWrt-Devel] [PATCH v2] sysctl: read settings from /etc/sysctl.d/*.conf   Stefan Tomanek
• [OpenWrt-Devel] [PATCH v2] scripts/feeds: print the source of packages installed   Karl Palsson
• [OpenWrt-Devel] [PATCH v2] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH v2] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Christian Mehlis
    • [OpenWrt-Devel] [PATCH v2] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Jo-Philipp Wich
      • [OpenWrt-Devel] [PATCH v2] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Jo-Philipp Wich
      • [OpenWrt-Devel] [PATCH v2] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
• [OpenWrt-Devel] [PATCHv2] scripts/feeds: observe -p flag for preferential feeds   Karl Palsson
  • [OpenWrt-Devel] [PATCHv2] scripts/feeds: observe -p flag for preferential feeds   John Crispin
• [OpenWrt-Devel] [RFC] Handling native application json formatted configs with uci   James Hilliard
• [OpenWrt-Devel] [PATCH v3] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Jo-Philipp Wich
  • [OpenWrt-Devel] [PATCH v3] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
• [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Rafał Miłecki
  • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Álvaro Fernández Rojas
  • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Ian Kent
    • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Rafał Miłecki
      • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Rafał Miłecki
  • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Michael Heimpold
    • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Rafał Miłecki
      • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Rafał Miłecki
      • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Rafał Miłecki
      • [OpenWrt-Devel] Looking for a Broadcom Asus tester(s)   Michael Heimpold
• [OpenWrt-Devel] procd: how to reload inittab?   Milan Kočvara
• [OpenWrt-Devel] tinc protocol handler   openwrt-devel at couprie.net
• [OpenWrt-Devel] [PATCH 1/3] bcm53xx: move wpad-mini from Makefile to Generic profile   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH 2/3] bcm53xx: add specific device profiles   Álvaro Fernández Rojas
    • [OpenWrt-Devel] [PATCH 2/3] bcm53xx: add specific device profiles   Rafał Miłecki
      • [OpenWrt-Devel] [PATCH 2/3] bcm53xx: add specific device profiles   Álvaro Fernández Rojas
  • [OpenWrt-Devel] [PATCH 3/3] bcm53xx: allow building specific device images   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm47xx: drop global description in favour of subtarget ones   Michael Heimpold
  • [OpenWrt-Devel] [PATCH] brcm47xx: drop global description in favour of subtarget ones   Rafał Miłecki
• [OpenWrt-Devel] menuconfig: unselect usign / build without opkg   Bastian Bittorf
• [OpenWrt-Devel] [PATCH v4] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Thomas Huehn
  • [OpenWrt-Devel] [PATCH v4] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Rafał Miłecki
    • [OpenWrt-Devel] [PATCH v4] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Thomas Hühn
  • [OpenWrt-Devel] [PATCH v4] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Christian Mehlis
    • [OpenWrt-Devel] [PATCH v4] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   Bastian Bittorf
    • [OpenWrt-Devel] [PATCH v4] [kernel] upstream fix: mount overlayfs r/o if workdir cannot be created   John Crispin
• [OpenWrt-Devel] [PATCH/RFC] bluez: Add bluez-daemon package   Bruno Randolf
• [OpenWrt-Devel] [PATCH] kernel: bluetooth: Add dependency to kmod-crypto-ecb   Bruno Randolf
• [OpenWrt-Devel] Suggestions anyone - EasyBox 904 xDSL (Lantiq xrx200)   Arnold Schulz
  • [OpenWrt-Devel] Suggestions anyone - EasyBox 904 xDSL (Lantiq xrx200)   Martin Blumenstingl
    • [OpenWrt-Devel] Suggestions anyone - EasyBox 904 xDSL (Lantiq xrx200)   Arnold Schulz
      • [OpenWrt-Devel] Suggestions anyone - EasyBox 904 xDSL (Lantiq xrx200)   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH 1/2] ipq806x: move stmmac support in the kernel binary   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 2/2] kernel: remove stmmac kernel package   Mathieu Olivari
  • [OpenWrt-Devel] [PATCH 1/2] ipq806x: move stmmac support in the kernel binary   Jonas Gorski
• [OpenWrt-Devel] [PATCH] ca-certificates: update to version 20150426   Christian Schoenebeck
• [OpenWrt-Devel] uhttpd - bugs vs oficial repo   Maciej Soltysiak
  • [OpenWrt-Devel] uhttpd - bugs vs oficial repo   Martin Blumenstingl
  • [OpenWrt-Devel] uhttpd - bugs vs oficial repo   Yousong Zhou
    • [OpenWrt-Devel] uhttpd - bugs vs oficial repo   Maciej Soltysiak
• [OpenWrt-Devel] Add an option to resolv.conf permanently?   Maciej Soltysiak
• [OpenWrt-Devel] [PATCH] lldpd: disable xml explicitly   Michael Heimpold
• [OpenWrt-Devel] [PATCH 2/2] ar71xx: use Image/BuildLoaderPatched for TPLINK-SAFELOADER images   Matthias Schiffer
  • [OpenWrt-Devel] [PATCH 2/2] ar71xx: use Image/BuildLoaderPatched for TPLINK-SAFELOADER images   Felix Fietkau
• [OpenWrt-Devel] [PATCH] mac80211: make netifd script create AP interface directly   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] block: support to mount read-only devices   Hua Shao
• [OpenWrt-Devel] [PATCH] malta: add default network configuration   Daniel Golle
• [OpenWrt-Devel] [PATCH/resend] [odhcp6c] script: only call firewall, if installed   Bastian Bittorf
  • [OpenWrt-Devel] [PATCH/resend] [odhcp6c] script: only call firewall, if installed   Steven Barth
    • [OpenWrt-Devel] [PATCH/resend] [odhcp6c] script: only call firewall, if installed   Bastian Bittorf
• [OpenWrt-Devel] [PATCH] odhcp6c: script: only call firewall, if installed   Bastian Bittorf
• [OpenWrt-Devel] [PATCH 1/2] tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimg   Martin Blumenstingl
  • [OpenWrt-Devel] [PATCH 2/2] lantiq: Make the CRC32 poly value configurable per device   Martin Blumenstingl
• [OpenWrt-Devel] [PATCH RFC] brcmfmac: register wiphy(s) during module_init   Rafał Miłecki

Last message date: Sun May 31 18:08:21 EDT 2015
Archived on: Thu Jun 25 05:56:11 EDT 2020

• Messages sorted by: [ subject ] [ author ] [ date ]
• More info on this list...