[OpenWrt-Devel] [PATCH] ar71xx: Add support for the Meraki MR12 & MR16
Chris Blake
chrisrblake93 at gmail.com
Mon May 11 18:52:24 EDT 2015
This patch is to add support for the Meraki MR12 and MR16 Access Points.
Currently everything is working, minus the 2nd NIC interface on the MR12
which is built into the SoC.
Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>
--
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index d702d45..785888d 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -109,6 +109,12 @@ get_status_led() {
mc-mac1200r)
status_led="mercury:green:system"
;;
+ mr12)
+ status_led="mr12:green:power"
+ ;;
+ mr16)
+ status_led="mr16:green:power"
+ ;;
mr600)
status_led="mr600:orange:power"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
index 16064de..41eeeeb 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/01_leds
@@ -178,6 +178,22 @@ mc-mac1200r)
ucidef_set_led_wlan "wlan5g" "WLAN5G" "mercury:green:wlan5g" "phy0tpt"
;;
+mr12)
+ ucidef_set_led_netdev "wan" "WAN" "mr12:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan1" "WLAN1" "mr12:green:wifi1" "phy0assoc"
+ ucidef_set_led_wlan "wlan2" "WLAN2" "mr12:green:wifi2" "phy0assoc"
+ ucidef_set_led_wlan "wlan3" "WLAN3" "mr12:green:wifi3" "phy0assoc"
+ ucidef_set_led_wlan "wlan4" "WLAN4" "mr12:green:wifi4" "phy0tpt"
+ ;;
+
+mr16)
+ ucidef_set_led_netdev "wan" "WAN" "mr16:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan1" "WLAN1" "mr16:green:wifi1" "phy0assoc"
+ ucidef_set_led_wlan "wlan2" "WLAN2" "mr16:green:wifi2" "phy0assoc"
+ ucidef_set_led_wlan "wlan3" "WLAN3" "mr16:green:wifi3" "phy0assoc"
+ ucidef_set_led_wlan "wlan4" "WLAN4" "mr16:green:wifi4" "phy0tpt"
+ ;;
+
mr600)
ucidef_set_led_wlan "wlan58" "WLAN58" "mr600:green:wlan58" "phy0tpt"
;;
diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
index d9aa519..aa0e1b4 100644
--- a/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
+++ b/target/linux/ar71xx/base-files/etc/uci-defaults/03_network-switchX-migration
@@ -61,6 +61,8 @@ dir-615-c1|\
dir-615-e1|\
dir-615-e4|\
ja76pf|\
+mr-12|\
+mr-16|\
rb-750|\
rb-751|\
tew-632brp|\
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index 645c5d9..d5dd561 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -471,6 +471,12 @@ ar71xx_board_detect() {
*"MAC1200R")
name="mc-mac1200r"
;;
+ *MR12)
+ name="mr12"
+ ;;
+ *MR16)
+ name="mr16"
+ ;;
*MR600v2)
name="mr600v2"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index b3c61ef..82b5bfa 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -184,6 +184,8 @@ platform_check_image() {
db120 | \
f9k1115v2 |\
hornet-ub | \
+ mr12 | \
+ mr16 | \
wpj558 | \
zcn-1523h-2 | \
zcn-1523h-5)
diff --git a/target/linux/ar71xx/config-3.18 b/target/linux/ar71xx/config-3.18
index 36b8bb6..543b77e 100644
--- a/target/linux/ar71xx/config-3.18
+++ b/target/linux/ar71xx/config-3.18
@@ -68,6 +68,8 @@ CONFIG_ATH79_MACH_HORNET_UB=y
CONFIG_ATH79_MACH_JA76PF=y
CONFIG_ATH79_MACH_JWAP003=y
CONFIG_ATH79_MACH_MC_MAC1200R=y
+CONFIG_ATH79_MACH_MR16=y
+CONFIG_ATH79_MACH_MR12=y
CONFIG_ATH79_MACH_MR600=y
CONFIG_ATH79_MACH_MR900=y
CONFIG_ATH79_MACH_MYNET_N600=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c
new file mode 100644
index 0000000..12c9a1c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr12.c
@@ -0,0 +1,115 @@
+/*
+ * Cisco Meraki MR12 board support
+ *
+ * Copyright (C) 2014-2015 Chris Blake <chrisrblake93 at gmail.com>
+ *
+ * Based on Atheros AP96 board support configuration
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2010 Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define MR12_GPIO_LED_W4_GREEN 14
+#define MR12_GPIO_LED_W3_GREEN 13
+#define MR12_GPIO_LED_W2_GREEN 12
+#define MR12_GPIO_LED_W1_GREEN 11
+
+#define MR12_GPIO_LED_WAN 15
+
+#define MR12_GPIO_LED_POWER_ORANGE 16
+#define MR12_GPIO_LED_POWER_GREEN 17
+
+#define MR12_GPIO_BTN_RESET 8
+#define MR12_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MR12_KEYS_DEBOUNCE_INTERVAL (3 * MR12_KEYS_POLL_INTERVAL)
+
+#define MR12_WAN_PHYMASK BIT(4)
+
+#define MR12_WMAC0_MAC_OFFSET 0x120c
+#define MR12_CALDATA0_OFFSET 0x1000
+
+static struct gpio_led MR12_leds_gpio[] __initdata = {
+ {
+ .name = "mr12:green:wan",
+ .gpio = MR12_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "mr12:orange:power",
+ .gpio = MR12_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "mr12:green:power",
+ .gpio = MR12_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr12:green:wifi4",
+ .gpio = MR12_GPIO_LED_W4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr12:green:wifi3",
+ .gpio = MR12_GPIO_LED_W3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr12:green:wifi2",
+ .gpio = MR12_GPIO_LED_W2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr12:green:wifi1",
+ .gpio = MR12_GPIO_LED_W1_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button MR12_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MR12_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MR12_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init MR12_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0xbfff0000);
+
+ ath79_register_mdio(0,0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = MR12_WAN_PHYMASK;
+ ath79_register_eth(0);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(MR12_leds_gpio),
+ MR12_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MR12_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(MR12_gpio_keys),
+ MR12_gpio_keys);
+
+ ap91_pci_init(mac + MR12_CALDATA0_OFFSET,
+ mac + MR12_WMAC0_MAC_OFFSET);
+
+}
+
+MIPS_MACHINE(ATH79_MACH_MR12, "MR12", "Meraki MR12", MR12_setup);
\ No newline at end of file
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c
new file mode 100644
index 0000000..9f08e3d
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr16.c
@@ -0,0 +1,118 @@
+/*
+ * Cisco Meraki MR16 board support
+ *
+ * Copyright (C) 2015 Chris Blake <chrisrblake93 at gmail.com>
+ *
+ * Based on Atheros AP96 board support configuration
+ *
+ * Copyright (C) 2009 Marco Porsch
+ * Copyright (C) 2009-2012 Gabor Juhos <juhosg at openwrt.org>
+ * Copyright (C) 2010 Atheros Communications
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+
+#include <asm/mach-ath79/ath79.h>
+
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+
+#define MR16_GPIO_LED_W4_GREEN 3
+#define MR16_GPIO_LED_W3_GREEN 2
+#define MR16_GPIO_LED_W2_GREEN 1
+#define MR16_GPIO_LED_W1_GREEN 0
+
+#define MR16_GPIO_LED_WAN 4
+
+#define MR16_GPIO_LED_POWER_ORANGE 5
+#define MR16_GPIO_LED_POWER_GREEN 6
+
+#define MR16_GPIO_BTN_RESET 7
+#define MR16_KEYS_POLL_INTERVAL 20 /* msecs */
+#define MR16_KEYS_DEBOUNCE_INTERVAL (3 * MR16_KEYS_POLL_INTERVAL)
+
+#define MR16_WAN_PHYMASK BIT(0)
+
+#define MR16_WMAC0_MAC_OFFSET 0x120c
+#define MR16_WMAC1_MAC_OFFSET 0x520c
+#define MR16_CALDATA0_OFFSET 0x1000
+#define MR16_CALDATA1_OFFSET 0x5000
+
+static struct gpio_led MR16_leds_gpio[] __initdata = {
+ {
+ .name = "mr16:green:wan",
+ .gpio = MR16_GPIO_LED_WAN,
+ .active_low = 1,
+ }, {
+ .name = "mr16:orange:power",
+ .gpio = MR16_GPIO_LED_POWER_ORANGE,
+ .active_low = 1,
+ }, {
+ .name = "mr16:green:power",
+ .gpio = MR16_GPIO_LED_POWER_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr16:green:wifi4",
+ .gpio = MR16_GPIO_LED_W4_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr16:green:wifi3",
+ .gpio = MR16_GPIO_LED_W3_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr16:green:wifi2",
+ .gpio = MR16_GPIO_LED_W2_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "mr16:green:wifi1",
+ .gpio = MR16_GPIO_LED_W1_GREEN,
+ .active_low = 1,
+ }
+};
+
+static struct gpio_keys_button MR16_gpio_keys[] __initdata = {
+ {
+ .desc = "reset",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = MR16_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = MR16_GPIO_BTN_RESET,
+ .active_low = 1,
+ }
+};
+
+static void __init MR16_setup(void)
+{
+ u8 *mac = (u8 *) KSEG1ADDR(0xbfff0000);
+
+ ath79_register_mdio(0,0x0);
+
+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+ ath79_eth0_data.phy_mask = MR16_WAN_PHYMASK;
+ ath79_register_eth(0);
+
+ ath79_register_m25p80(NULL);
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(MR16_leds_gpio),
+ MR16_leds_gpio);
+ ath79_register_gpio_keys_polled(-1, MR16_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(MR16_gpio_keys),
+ MR16_gpio_keys);
+
+ ap94_pci_init(mac + MR16_CALDATA0_OFFSET,
+ mac + MR16_WMAC0_MAC_OFFSET,
+ mac + MR16_CALDATA1_OFFSET,
+ mac + MR16_WMAC1_MAC_OFFSET);
+}
+
+MIPS_MACHINE(ATH79_MACH_MR16, "MR16", "Meraki MR16", MR16_setup);
\ No newline at end of file
diff --git a/target/linux/ar71xx/generic/profiles/meraki.mk b/target/linux/ar71xx/generic/profiles/meraki.mk
new file mode 100644
index 0000000..0d5cda0
--- /dev/null
+++ b/target/linux/ar71xx/generic/profiles/meraki.mk
@@ -0,0 +1,27 @@
+#
+# Copyright (C) 2014-2015 Chris Blake (chrisrblake93 at gmail.com)
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/MR12
+ NAME:=Meraki MR12
+ PACKAGES:=kmod-spi-gpio kmod-ath9k
+endef
+
+define Profile/MR12/description
+ Package set optimized for the Cisco Meraki MR12 Access Point.
+endef
+
+define Profile/MR16
+ NAME:=Meraki MR16
+ PACKAGES:=kmod-spi-gpio kmod-ath9k
+endef
+
+define Profile/MR16/description
+ Package set optimized for the Cisco Meraki MR16 Access Point.
+endef
+
+$(eval $(call Profile,MR12))
+$(eval $(call Profile,MR16))
\ No newline at end of file
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index d6e6285..d125a0d 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -833,6 +833,8 @@ dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64
dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k at 0x660000(caldata_orig),6208k at 0x50000(firmware_orig)
dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro
hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k at 0x20000(firmware)
+mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k at 0x80000(firmware)
+mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k at 0x80000(firmware)
pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k at 0x50000(firmware)
planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro
ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
@@ -1710,6 +1712,8 @@ $(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,1152
$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
+$(eval $(call SingleProfile,AthLzma,64k,MR12,mr12,MR12,ttyS0,115200,$$(mr12_mtdlayout),RKuImage))
+$(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdlayout),RKuImage))
$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage))
$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536))
$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage))
diff --git a/target/linux/ar71xx/patches-3.18/738-MIPS-ath79-add-meraki-mr12-mr16-support.patch b/target/linux/ar71xx/patches-3.18/738-MIPS-ath79-add-meraki-mr12-mr16-support.patch
new file mode 100644
index 0000000..a117774
--- /dev/null
+++ b/target/linux/ar71xx/patches-3.18/738-MIPS-ath79-add-meraki-mr12-mr16-support.patch
@@ -0,0 +1,51 @@
+--- a/arch/mips/ath79/Kconfig
++++ b/arch/mips/ath79/Kconfig
+@@ -687,6 +687,26 @@ config ATH79_MACH_OM5P
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
++config ATH79_MACH_MR12
++ bool "Meraki MR12 board support"
++ select SOC_AR724X
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
++config ATH79_MACH_MR16
++ bool "Meraki MR16 board support"
++ select SOC_AR71XX
++ select ATH79_DEV_AP9X_PCI if PCI
++ select ATH79_DEV_ETH
++ select ATH79_DEV_GPIO_BUTTONS
++ select ATH79_DEV_LEDS_GPIO
++ select ATH79_DEV_M25P80
++ select ATH79_DEV_WMAC
++
+ config ATH79_MACH_MR600
+ bool "OpenMesh MR600 board support"
+ select SOC_AR934X
+--- a/arch/mips/ath79/Makefile
++++ b/arch/mips/ath79/Makefile
+@@ -78,6 +78,8 @@ obj-$(CONFIG_ATH79_MACH_JA76PF) +
+ obj-$(CONFIG_ATH79_MACH_JWAP003) += mach-jwap003.o
+ obj-$(CONFIG_ATH79_MACH_HORNET_UB) += mach-hornet-ub.o
+ obj-$(CONFIG_ATH79_MACH_MC_MAC1200R) += mach-mc-mac1200r.o
++obj-$(CONFIG_ATH79_MACH_MR12) += mach-mr12.o
++obj-$(CONFIG_ATH79_MACH_MR16) += mach-mr16.o
+ obj-$(CONFIG_ATH79_MACH_MR600) += mach-mr600.o
+ obj-$(CONFIG_ATH79_MACH_MR900) += mach-mr900.o
+ obj-$(CONFIG_ATH79_MACH_MYNET_N600) += mach-mynet-n600.o
+--- a/arch/mips/ath79/machtypes.h
++++ b/arch/mips/ath79/machtypes.h
+@@ -67,6 +67,8 @@ enum ath79_mach_type {
+ ATH79_MACH_JA76PF2, /* jjPlus JA76PF2 */
+ ATH79_MACH_JWAP003, /* jjPlus JWAP003 */
+ ATH79_MACH_HORNET_UB, /* ALFA Networks Hornet-UB */
++ ATH79_MACH_MR12, /* Cisco Meraki MR12 */
++ ATH79_MACH_MR16, /* Cisco Meraki MR16 */
+ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */
+ ATH79_MACH_MR600, /* OpenMesh MR600 */
+ ATH79_MACH_MR900, /* OpenMesh MR900 */
--
2.1.4
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list