[OpenWrt-Devel] ath9k_htc: Target is unresponsive

[Caleb James DeLisle]

I've seen a similar issue with the toshiba wlm20u2 where it says it's
transferring htc_9271.fw but that's actually the wrong fw so the device
crashes, the solution for me was to specify the device as AR9280_USB
in the ath9k_hif_usb_ids struct as per the following:
https://github.com/cjdelisle/athdrvrs/blob/master/ath9k/hif_usb.c#L59

Maybe this is helpful...

On 05/25/2015 05:59 PM, Luca Olivetti wrote:
> El 25/05/15 a les 17:27, Bruno Randolf ha escrit:
>> On 05/25/2015 03:38 PM, Luca Olivetti wrote:
>>> This is the message I get when I plug  a tp-link tl-wn722n (which is
>>> working fine both in an ubuntu desktop and on a mageia laptop):
>>>
>>>
>>> [  547.804000] usb 1-1: new high-speed USB device number 5 using ifxusb_hcd
>>> [  548.020000] usb 1-1: ath9k_htc: Firmware htc_9271.fw requested
>>> [  549.296000] usb 1-1: ath9k_htc: Transferred FW: htc_9271.fw, size: 50980
>>> [  550.304000] ath9k_htc 1-1:1.0: ath9k_htc: Target is unresponsive
>>> [  550.308000] ath9k_htc: Failed to initialize the device
>>>
>>>
>>> Just to exclude a problem with the usb port, I tried with an rt73 based
>>> stick I have and it works fine.
>>> I have a different firmware on my desktop system, I tried it but the
>>> result is the same.
>>>
>>> This is with openwrt trunk on an astoria arv7518pw (lantiq xway)
>>
>> Maybe a problem with the USB power supply. Can you try with a powered
>> USB hub?
> 
> Yes, I thought so, but I don't have a powered usb hub :-/
> 
> Bye
> 

-- 
Satire is the escape hatch from the cycle of sorrow, hatred and violence. #JeSuisCharlie
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel