[OpenWrt-Devel] [RFC PATCH] ar71xx: Support Antminer S1/S3

[James Hilliard]

The generic changes I had intended to remove before a final
submission. I'm also wondering what the best way to handle devices
with 1 ethernet port is, should that be a WAN or a LAN port(right now
it seems to be WAN with some things on the firewall opened up), it
also has a rarely used wireless header that is configured as a LAN
port. For the moment I'm a little stuck on separating it out fully
from the tp-link device specifically in relation to
tplink_board_detect() and the conflicting ID, would you have any
suggestions for how to fix that? I'll work on making the patch as
small as possible as well. I created the patch using a git diff and it
seemed to apply when I used git apply, did my mail client mess up the
formatting?

On Sun, May 10, 2015 at 5:23 AM, Felix Fietkau <nbd at openwrt.org> wrote:
> On 2015-05-02 05:08, James Hilliard wrote:
>> I did my best to separate this device out, below is my current patch,
>> comments appreciated. I'm having trouble figuring out how to
>> differentiate the hwid which seems to be the same as the tp-link
>> wr743nd-v2. 0x07430002 Is the hardware ID that both seem to have, is
>> there any other ID's that I may be able to use?
>>
> There are a lot of seemingly bogus unrelated changes, especially the
> ones to the generic code. The patch is completely misformatted, so it
> won't ever apply.
> Many of the changes do not make sense, so please make an effort to
> reduce the patch to the smallest amount of change to support the platform.
>
> - Felix
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel