March 2015 Archives by subject

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...

Starting: Sun Mar 1 07:51:53 EST 2015
Ending: Tue Mar 31 23:18:10 EDT 2015
Messages: 712

• [OpenWrt-Devel] "UCI overlay" proposal   Matthias Schiffer
• [OpenWrt-Devel] "UCI overlay" proposal   David Lang
• [OpenWrt-Devel] "UCI overlay" proposal   Shankar Unni
• [OpenWrt-Devel] "UCI overlay" proposal   Zefir Kurtisi
• [OpenWrt-Devel] "UCI overlay" proposal   David Lang
• [OpenWrt-Devel] "UCI overlay" proposal   David Lang
• [OpenWrt-Devel] "UCI overlay" proposal   Matthias Schiffer
• [OpenWrt-Devel] "UCI overlay" proposal   Zefir Kurtisi
• [OpenWrt-Devel] "UCI overlay" proposal   David Lang
• [OpenWrt-Devel] [OpenWrt-Commits] r44899 - trunk/package/network/config/netifd   Arjen de Korte
• [OpenWrt-Devel] [OpenWrt-Commits] r44899 - trunk/package/network/config/netifd   Hannu Nyman
• [OpenWrt-Devel] [OpenWrt-Commits] r44899 - trunk/package/network/config/netifd   Hannu Nyman
• [OpenWrt-Devel] [OpenWrt-Commits] r44899 - trunk/package/network/config/netifd   Hannu Nyman
• [OpenWrt-Devel] [OpenWrt-Devel,kernel] wnr2200 gpio   Markus Kohls
• [OpenWrt-Devel] [OpenWrt-Devel,kernel] wnr2200 gpio   Matthias Schiffer
• [OpenWrt-Devel] [OpenWrt-Tickets] [OpenWrt] #19186: DDNS: NO valid IP found   Christian Schoenebeck
• [OpenWrt-Devel] [PATCH 0/2] ath5k: reset path fixes   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 0/2] netifd: Drop legacy json-c support and add support for latest libnl   Simon Hoinkis
• [OpenWrt-Devel] [PATCH 0/3] uci: a few fixes.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 0/4] Small fixes to mobile protocol handling   Matti Laakso
• [OpenWrt-Devel] [PATCH 0/5] kernel: tiny config symbols cleanup   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx - changes for R8000 so far   Ian Kent
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx - changes for R8000 so far   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx - changes for R8000 so far   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx - changes for R8000 so far   Ian Kent
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx: changes for R8000 so far   Ian Kent
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx: changes for R8000 so far   Jonas Gorski
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx: changes for R8000 so far   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 0/6] bcm53xx: changes for R8000 so far   Ian Kent
• [OpenWrt-Devel] [PATCH 0/6] Series short description   Ian Kent
• [OpenWrt-Devel] [PATCH 0/6] Series short description   Jonas Gorski
• [OpenWrt-Devel] [PATCH 0/6] Series short description   Ian Kent
• [OpenWrt-Devel] [PATCH 00/33] atheros: switch to 3.18 and rename to ath25   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 01/33] atheros: add v3.18 support   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 02/33] atheros: v3.18: rename ATHEROS_AR231X symbol to ATH25   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 03/33] atheros: v3.18: rename kernel platform to ath25   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 04/33] atheros: v3.18: rename platform header   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 05/33] atheros: v3.18: remove odd header reset.h   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 06/33] atheros: v3.18: remove eth platform device unused field   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 07/33] atheros: v3.18: cleanup cpu-feature-overrides.h   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 08/33] atheros: v3.18: update names and declarations   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 09/33] atheros: v3.18: change calls logic   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 1/1] kernel: refined one of 514-yaffs-3.6-use-delayed-work-instead-of-write_super.patch   ngc
• [OpenWrt-Devel] [PATCH 1/1] kernel: refined one of 514-yaffs-3.6-use-delayed-work-instead-of-write_super.patch   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/1] kernel: refined one of 514-yaffs-3.6-use-delayed-work-instead-of-write_super.patch   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] [packages] add support for Huawei NCM modems   Maarten Deprez
• [OpenWrt-Devel] [PATCH 1/2] [packages] add support for Huawei NCM modems   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH 1/2] [packages] add support for Huawei NCM modems (openwrt-devel Digest, Vol 111, Issue 138)   Maarten Deprez
• [OpenWrt-Devel] [PATCH 1/2] Add pkg-config for libnl (3.2) and json-c (0.12) in CMakeLists.txt   Simon Hoinkis
• [OpenWrt-Devel] [PATCH 1/2] Add pkg-config for libnl (3.2) and json-c (0.12) in CMakeLists.txt   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] ath5k: channel change fix   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 1/2] gccgo/libgo toolchain support for OpenWrt   Jeff Waugh
• [OpenWrt-Devel] [PATCH 1/2] gccgo/libgo toolchain support for OpenWrt   Steven Barth
• [OpenWrt-Devel] [PATCH 1/2] gccgo/libgo toolchain support for OpenWrt   Jeff Waugh
• [OpenWrt-Devel] [PATCH 1/2] gccgo/libgo toolchain support for OpenWrt   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] oxnas: add support for kernel 4.0   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT IO multiplexing   wengbj
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   wengbj
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] ralink: add FireWRT power button   fl.service at t-firefly.com
• [OpenWrt-Devel] [PATCH 1/2] ralink: mt7621 add ECHI OCHI XCHI support   wengbj
• [OpenWrt-Devel] [PATCH 1/2] tests: add test cases for -P and -p options.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   Jeff Waugh
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   Mirko Vogt
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   John Crispin
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   Jeff Waugh
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] [PATCH 1/2] toolchain: The glorious return of glibc, ver 2.21   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: add md5sum support   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: add md5sum support   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: add md5sum support   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: add md5sum support   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: add md5sum support   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] [rpcd] file: show "data" ubus parameter only when used   Luka Perkov
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: rename and extend wrt160nl's trx partition parser   Christian Lamparter
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: rename and extend wrt160nl's trx partition parser   John Crispin
• [OpenWrt-Devel] [PATCH 1/3] ar71xx: rename and extend wrt160nl's trx partition parser   Christian Lamparter
• [OpenWrt-Devel] [PATCH 1/3] b53: add b53_mac_array_to_u64() utility function   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 1/3] b53: add b53_mac_array_to_u64() utility function   Jonas Gorski
• [OpenWrt-Devel] [PATCH 1/3] hostapd: update hostapd to 2.4 release   Daniel Golle
• [OpenWrt-Devel] [PATCH 1/3] kernel: mtdsplit: add support for FIT image   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/3] kernel: video.mk: [media] sn9c102: remove deprecated driver   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/3] rb532: add 3.18 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 1/3] testenv: test for exit status of "uci export".   Yousong Zhou
• [OpenWrt-Devel] [PATCH 1/4] ar71xx: fix WRT160NL and TP-Link partition parser patches   Christian Lamparter
• [OpenWrt-Devel] [PATCH 1/4] ar71xx: fix WRT160NL and TP-Link partition parser patches   Christian Lamparter
• [OpenWrt-Devel] [PATCH 1/4] comgt, wwan: Move USB data files to wwan package   Matti Laakso
• [OpenWrt-Devel] [PATCH 1/4] include/image.mk: define variable FILESYSTEM   Alexander Couzens
• [OpenWrt-Devel] [PATCH 1/5] ipq806x: move 020-add-ap148-bootargs.patch in patches-3.18   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 1/5] kernel: remove GENERIC_NET_UTILS from platform configs   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 1/5] omap: remove patch wlcore Add-support-for-DT-platform-data   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 1/6] ar71xx: add kernel support for the OpenMesh OM5P-AN board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 1/6] bcm53xx - fixup early device id 8012   Ian Kent
• [OpenWrt-Devel] [PATCH 1/6] bcm53xx - fixup early device id 8012   Rafał Miłecki
• [OpenWrt-Devel] [PATCH 1/6] bcm53xx - fixup early device id 8012   Ian Kent
• [OpenWrt-Devel] [PATCH 1/6] bcm53xx: fixup early device id 8012   Ian Kent
• [OpenWrt-Devel] [PATCH 1/6] gemini: add 3.18 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 10/33] atheros: v3.18: rearrange interrupt handling functions   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 11/33] atheros: v3.18: rework early initialization   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 12/33] atheros: v3.18: relocate PCI host DMA base definition   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 13/33] atheros: v3.18: rearrange PCI regs definitions   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 14/33] atheros: v3.18: move PCI enable code to arch   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 15/33] atheros: v3.18: add context container for PCI driver   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 16/33] atheros: v3.18: remap PCI controller MMR memory   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 17/33] atheros: v3.18: pass PCI IRQ and I/O mem via resources   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 18/33] atheros: v3.18: cleanup register headers   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 19/33] atheros: v3.18: remap main SoC MMR memory   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 2/2] [luci] add Huawei NCM protocol   Maarten Deprez
• [OpenWrt-Devel] [PATCH 2/2] ath5k: fix reset race   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 2/2] busybox: Minor fix for glibc 2.21 compatibility   Jeff Waugh
• [OpenWrt-Devel] [PATCH 2/2] Fix delta path handling.   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/2] Fix delta path handling.   Felix Fietkau
• [OpenWrt-Devel] [PATCH 2/2] Include bits.h in handler.h to prevent linker error   Simon Hoinkis
• [OpenWrt-Devel] [PATCH 2/2] Include bits.h in handler.h to prevent linker error   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] oxnas: remove pre kernel 3.18 support from pinctrl driver   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/2] ralink: FireWRT flash size is up to 16M.   wengbj
• [OpenWrt-Devel] [PATCH 2/2] ralink: MT7621 add i2c controller driver   wengbj
• [OpenWrt-Devel] [PATCH 2/2] ralink: MT7621 add i2c controller driver   Jonas Gorski
• [OpenWrt-Devel] [PATCH 2/2] ralink: MT7621 add i2c controller driver on linux kernel 3.18   wengbj
• [OpenWrt-Devel] [PATCH 2/2] ralink: MT7621 add i2c controller driver on linux kernel 3.18   John Crispin
• [OpenWrt-Devel] [PATCH 2/2] toolchain/gcc/final: Add --disable-werror   Jeff Waugh
• [OpenWrt-Devel] [PATCH 2/3] [rpcd] file: add support for base64   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/3] [rpcd] file: add support for base64   John Crispin
• [OpenWrt-Devel] [PATCH 2/3] [rpcd] file: add support for base64   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/3] [rpcd] file: use blob_buf_free()   Luka Perkov
• [OpenWrt-Devel] [PATCH 2/3] ar71xx: update TP-Link partition parser patches to apply again   Christian Lamparter
• [OpenWrt-Devel] [PATCH 2/3] cli: fix return value of package_cmd().   Yousong Zhou
• [OpenWrt-Devel] [PATCH 2/3] hostapd: package wpad-mesh and wpa_supplicant-mesh variants   Daniel Golle
• [OpenWrt-Devel] [PATCH 2/3] ipq806x: add ap148 bootargs to DT   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/3] kernel: remove mp-alg   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/3] rb532: align partitions to 128KB   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 2/4] ar71xx/image: add Build/mktplinkfw as buildstep for new build code   Alexander Couzens
• [OpenWrt-Devel] [PATCH 2/4] ar71xx: rename wrt160nl's trx partition parser   Christian Lamparter
• [OpenWrt-Devel] [PATCH 2/4] wwan: Improve USB modem hotplug script   Matti Laakso
• [OpenWrt-Devel] [PATCH 2/5] ipq806x: add support for 4.0 kernel   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 2/5] kernel: enable AES-NI for x86   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] kernel: enable AES-NI for x86   Ulrich Weber
• [OpenWrt-Devel] [PATCH 2/5] kernel: enable AES-NI for x86   John Crispin
• [OpenWrt-Devel] [PATCH 2/5] kernel: fix kmod-usb-phy-omap-usb2   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 2/5] kernel: move MTD_SPLIT_SUPPORT to generic config   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 2/6] ar71xx: add user-space support for the OpenMesh OM5P-AN   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 2/6] bcm53xx - fix typo in bcm47xx sprom driver   Ian Kent
• [OpenWrt-Devel] [PATCH 2/6] bcm53xx: fix typo in bcm47xx sprom driver   Ian Kent
• [OpenWrt-Devel] [PATCH 2/6] gemini: don't build jffs2 image for Raidsonic board   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 20/33] atheros: v3.18: make registers headers local   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 21/33] atheros: v3.18: remap flash for boardconfig parsing   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 22/33] atheros: v3.18: update register names   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 23/33] atheros: v3.18: switch to IRQ domain   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 24/33] atheros: v3.18: move GPIO patches behind PCI   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 25/33] atheros: v3.18: rearrange code between patches   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 26/33] atheros: v3.18: cleanup includes   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 27/33] atheros: v3.18: non-functional cleanup   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 28/33] atheros: v3.18: renumber backported patches   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 29/33] atheros: switch to 3.18   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 3/3][RESEND] b53: implement ARL Table read/write operations   Jonas Gorski
• [OpenWrt-Devel] [PATCH 3/3][RESEND] b53: implement ARL Table read/write operations   Jonas Gorski
• [OpenWrt-Devel] [PATCH 3/3][RESEND] b53: implement ARL Table read/write operations   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: add support for setting mode when writing files   Luka Perkov
• [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: add support for setting mode when writing files   John Crispin
• [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: add support for setting mode when writing files   Luka Perkov
• [OpenWrt-Devel] [PATCH 3/3] [rpcd] file: free memory after opendir()   Luka Perkov
• [OpenWrt-Devel] [PATCH 3/3] ar71xx: improve WD's My Net Wi-fi Range Extender image creation   Christian Lamparter
• [OpenWrt-Devel] [PATCH 3/3] b53: create slave devices for ports   Jonas Gorski
• [OpenWrt-Devel] [PATCH 3/3] ipq806x: fix AP148 boot from NOR   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/3] lua: return module table instead of boolean value on require('uci').   Yousong Zhou
• [OpenWrt-Devel] [PATCH 3/3] mac80211: allow encrypted mesh with wpa_supplicant   Daniel Golle
• [OpenWrt-Devel] [PATCH 3/3] netfilter: add missing module/symbol   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 3/3] rb532: switch to 3.18   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 3/4] ar71xx/image: add tplink device template for new building code   Alexander Couzens
• [OpenWrt-Devel] [PATCH 3/4] ar71xx: generalize cybertan partition parser   Christian Lamparter
• [OpenWrt-Devel] [PATCH 3/4] ncm: Remove unnecessary proto_set_available commands   Matti Laakso
• [OpenWrt-Devel] [PATCH 3/5] ipq806x: clean up kernel conf   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 3/5] kernel: disbale HAMRADIO in generic config   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 3/5] kernel: fix kmod-usb2-omap usb module   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 3/6] ar71xx: enable sysupgrade for the OpenMesh OM5P-AN   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 3/6] bcm53xx - update sprom from nvram to handle rev 11   Ian Kent
• [OpenWrt-Devel] [PATCH 3/6] bcm53xx: update sprom from nvram to handle rev 11   Ian Kent
• [OpenWrt-Devel] [PATCH 3/6] gemini: switch to 3.18   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 30/33] atheros: remove linux 3.14   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 31/33] atheros: remove odd board check during image build   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 32/33] Rename 'atheros' target to 'ath25'   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 33/33] ath25: set myself as maintainer   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 4/4] ar71xx/image: move wdr3500/wdr3600/wdr4300 to new building code   Alexander Couzens
• [OpenWrt-Devel] [PATCH 4/4] ar71xx: improve WD's My Net Wi-fi Range Extender image creation   Christian Lamparter
• [OpenWrt-Devel] [PATCH 4/4] ncm, qmi, mbim: Add dependency on wwan package   Matti Laakso
• [OpenWrt-Devel] [PATCH 4/5] config: add an option to enable KPROBE   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 4/5] kernel: disable ARCH_NEEDS_CPU_IDLE_COUPLED   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 4/5] omap: add profile for BeagleBoard   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 4/6] bcm53xx - increase nvram allocation size to 64k   Ian Kent
• [OpenWrt-Devel] [PATCH 4/6] bcm53xx: increase nvram allocation size to 64k   Ian Kent
• [OpenWrt-Devel] [PATCH 4/6] gemini: remove broken flag   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 4/6] package/om-watchdog: add OpenMesh OM5P-AN support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 5/5] kernel: move KERNFS to generic config   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH 5/5] kernel: upgrade 4.0 to rc6   Mathieu Olivari
• [OpenWrt-Devel] [PATCH 5/5] omap: add missing symbols   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH 5/6] bcm53xx - deal with R8000 mac address settings   Ian Kent
• [OpenWrt-Devel] [PATCH 5/6] bcm53xx: deal with R8000 mac address settings   Ian Kent
• [OpenWrt-Devel] [PATCH 5/6] bcm53xx: deal with R8000 mac address settings   Jonas Gorski
• [OpenWrt-Devel] [PATCH 5/6] bcm53xx: deal with R8000 mac address settings   Ian Kent
• [OpenWrt-Devel] [PATCH 5/6] gemini: nuke 3.10 support   Roman Yeryomin
• [OpenWrt-Devel] [PATCH 5/6] package/uboot-envtools: add OpenMesh OM5P-AN support   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 6/6] ar71xx: adjust OM5P profile for the OpenMesh OM5P-AN board   Sven Eckelmann
• [OpenWrt-Devel] [PATCH 6/6] bcm5301x - R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] bcm53xx: R8000 handle PEX8603 switch   Ian Kent
• [OpenWrt-Devel] [PATCH 6/6] gemini: switch mantainer to myself   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] [ar71xx] Fix (invert/revert) Hornet-UB WPS LED state   Janne Cederberg
• [OpenWrt-Devel] [PATCH] [ar71xx] Fix duplicate tickets 14136 and 15282 (Hornet UB GPIO WPS/Reset)   Janne Cederberg
• [OpenWrt-Devel] [PATCH] [ar71xx] Fix duplicate tickets 14136 and 15282 (Hornet UB GPIO WPS/Reset)   Janne Cederberg
• [OpenWrt-Devel] [PATCH] [ar71xx] Fix duplicate tickets 14136 and 15282 (Hornet UB GPIO WPS/Reset)   Joshua Judson Rosen
• [OpenWrt-Devel] [PATCH] [ar71xx] Fix duplicate tickets 14136 and 15282 (Hornet UB GPIO WPS/Reset)   Janne Cederberg
• [OpenWrt-Devel] [PATCH] [ar71xx] Fix duplicate tickets 14136 and 15282 (Hornet UB GPIO WPS/Reset)   Joshua Judson Rosen
• [OpenWrt-Devel] [PATCH] [BB] Backport: ar71xx: Fix board detection for the TP-LINK TL-MR13U.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B support   Jonas Gorski
• [OpenWrt-Devel] [PATCH][bcm63xx]: Add DGND3700 v1 / DGND3800B support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] [dnsmasq] add --tftp-no-fail to ignore missing tftp root   Stefan Tomanek
• [OpenWrt-Devel] [PATCH] [dnsmasq] Add option '--servers-file'   Lars Kruse
• [OpenWrt-Devel] [PATCH] [kernel] kernel: add missing symbol   John Szakmeister
• [OpenWrt-Devel] [PATCH] [kernel] wnr2200 gpio   mar
• [OpenWrt-Devel] [PATCH] [kernel] wnr2200 gpio   John Crispin
• [OpenWrt-Devel] [PATCH] [kernel] wnr2200 gpio   markus
• [OpenWrt-Devel] [PATCH] [kernel] wnr2200 gpio   John Crispin
• [OpenWrt-Devel] [PATCH] [libubox] b64: add base64 support   Luka Perkov
• [OpenWrt-Devel] [PATCH] [libubox] b64: add base64 support   Felix Fietkau
• [OpenWrt-Devel] [PATCH] [luci] Add luci support for dnsmasq option '--servers-file'   Lars Kruse
• [OpenWrt-Devel] [PATCH] [package] igmpproxy: Multiple downlink interfaces fix.   Erik Tews
• [OpenWrt-Devel] [PATCH] [package] mwlwifi: generate TX_STATUS event on transmitting auth, associate, and reallocate responses   Pat Fruth
• [OpenWrt-Devel] [PATCH] [package] mwlwifi: generate TX_STATUS event on transmitting auth, associate, and reallocate responses   Ian Kent
• [OpenWrt-Devel] [PATCH] [package] mwlwifi: generate TX_STATUS event on transmitting auth, associate, and reallocate responses   Ian Kent
• [OpenWrt-Devel] [PATCH] [package] perf: don't error on warnings   John Szakmeister
• [OpenWrt-Devel] [PATCH] [packages] clean packages already moved to github   Mantas Pucka
• [OpenWrt-Devel] [PATCH] [packages] ipset: Bump to 6.24   Jeroen Louwes
• [OpenWrt-Devel] [PATCH][RESEND] lldpd: add option to disable priviledge separation   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH][RESEND] lldpd: add option to disable priviledge separation   Stijn Tintel
• [OpenWrt-Devel] [PATCH][RESEND] lldpd: add option to disable priviledge separation   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH][RESEND V2] lldpd: add option to disable privilege separation   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH][RESEND V2] lldpd: add option to disable privilege separation   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   Jonas Gorski
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   John Crispin
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   Jonas Gorski
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   John Crispin
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   Jonas Gorski
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   John Crispin
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   Jonas Gorski
• [OpenWrt-Devel] [PATCH][RFT] adm5120: switch kernel to 3.18   Rafał Miłecki
• [OpenWrt-Devel] [PATCH][RFT] mpc52xx: switch kernel to 3.18   Rafał Miłecki
• [OpenWrt-Devel] [PATCH][RFT] omap: switch kernel to 3.18   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] [tools] patch: bump GNU patch to 2.7.5   Hannu Nyman
• [OpenWrt-Devel] [PATCH] Add support for ZTE Q7   郭传鈜
• [OpenWrt-Devel] [PATCH] Add support for ZTE Q7   郭传鈜
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Shvedov Yury
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Shvedov Yury
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   David Hutchison
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Stefan Rompf
• [OpenWrt-Devel] [PATCH] ar71xx: add support for the UniFi AP Outdoor Plus   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH] ar71xx: detect GL.iNet model   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: detect GL.iNet model   Cezary Jackiewicz
• [OpenWrt-Devel] [PATCH] ar71xx: detect GL.iNet model   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: detect GL.iNet model   Mark Janssen
• [OpenWrt-Devel] [PATCH] ar71xx: Fix board detection for the TP-LINK TL-MR13U.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ar71xx: fix LED GPIO definitions for NETGEAR WNR2200   Markus Kohls
• [OpenWrt-Devel] [PATCH] ar71xx: fix LED GPIO definitions for NETGEAR WNR2200   John Crispin
• [OpenWrt-Devel] [PATCH] ar71xx: Fix LED polarity for the TP-LINK TL-MR13U.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC   Hannu Nyman
• [OpenWrt-Devel] [PATCH] ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix switched WLAN LEDs on TP-LINK Archer C5/C7   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions   Daniel Petre
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions   Alpha Sparc
• [OpenWrt-Devel] [PATCH] ar71xx: fix TP-LINK TL-WDR3600/4300 RFKILL switch positions   Alpha Sparc
• [OpenWrt-Devel] [PATCH] ARV752DPW22: enable netconsole in u-boot if 192.168.1.2 is reachable   Tobias Göbel
• [OpenWrt-Devel] [PATCH] ARV752DPW22: enable netconsole in u-boot if 192.168.1.2 is reachable   Luka Perkov
• [OpenWrt-Devel] [PATCH] ARV752DPW22: enable netconsole in u-boot if 192.168.1.2 is reachable   Tobias Göbel
• [OpenWrt-Devel] [PATCH] ARV752DPW22: enable netconsole in u-boot if 192.168.1.2 is reachable   Tobias Göbel
• [OpenWrt-Devel] [PATCH] at91: add SAMA5D3-Xplained board UBI parameters to makefile.   Songjun Wu
• [OpenWrt-Devel] [PATCH] b53: define registers available and needed on BCM5301X   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] b53: define registers available and needed on BCM5301X   Jonas Gorski
• [OpenWrt-Devel] [PATCH] b53: fix overriding port 8 state (if it is connected to CPU)   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] b53: fix overriding port 8 state (if it is connected to CPU)   Jonas Gorski
• [OpenWrt-Devel] [PATCH] b53: fix overriding port 8 state (if it is connected to CPU)   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] b53: fix overriding port 8 state (if it is connected to CPU)   Jonas Gorski
• [OpenWrt-Devel] [PATCH] b53: reverse duplex bit meaning for IMP state override register   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] b53: reverse duplex bit meaning for IMP state override register   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] b53: reverse duplex bit meaning for IMP state override register   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: Add BT Home Hub 2A support.   dani
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3032u support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3032u support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm63xx: add Comtrend VR-3032u support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: add experimental Comtrend VR-3032u support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm63xx: add experimental Comtrend VR-3032u support   Jonas Gorski
• [OpenWrt-Devel] [PATCH] brcm63xx: fix 6368 cpu1 reg typo   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] brcm63xx: fix 6368 cpu1 reg typo   Jonas Gorski
• [OpenWrt-Devel] [PATCH] build: add optional dependency on libssp to all non-kernel packages   Stijn Tintel
• [OpenWrt-Devel] [PATCH] build: define STAMP_CONFIGURED recursively   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] build: fix CMake assembly builds with ccache   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] config: add function tracers   Bryan Forbes
• [OpenWrt-Devel] [PATCH] curl: fix PKG_CONFIG_DEPENDS   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] dosfstools: update to latest version   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] dosfstools: update to latest version   {Nico}
• [OpenWrt-Devel] [PATCH] Fix 3.18.8 breakage of UBI devices with EOF marker (e.g. WNDR4300)   Oliver Smith
• [OpenWrt-Devel] [PATCH] gemini: fix usb driver compilation on 3.18   Roman Yeryomin
• [OpenWrt-Devel] [PATCH] hostapd: add switch_chan and set_vendor_elements ubus methods   John Crispin
• [OpenWrt-Devel] [PATCH] hostapd: add switch_chan and set_vendor_elements ubus methods   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] ipq806x: rename patches in patches-3.18   Mathieu Olivari
• [OpenWrt-Devel] [PATCH] ipset: add ipmark support   Jeroen Louwes
• [OpenWrt-Devel] [PATCH] kernel/generic: (try) fixing MAP-E patch broken in 4.0   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: add missing symbols to config and modules   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: add two more missing config symbols   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4   Daniel Golle
• [OpenWrt-Devel] [PATCH] kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4   Imre Kaloz
• [OpenWrt-Devel] [PATCH] kernel: fix usb kernel package Makefile   wengbj
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   Jeff Waugh
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   Jeff Waugh
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   Jeff Waugh
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   John Crispin
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   Rafał Miłecki
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   Jeff Waugh
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   Jeff Waugh
• [OpenWrt-Devel] [PATCH] kernel: Support kernel options required by systemd   John Crispin
• [OpenWrt-Devel] [PATCH] kmod-usb-dwc2: depends on udc-core (kmod-usb-gadget)   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] lantiq/xrx200/TDW8970: add ltq-ptm-vr9 to default packages   Alexander Couzens
• [OpenWrt-Devel] [PATCH] lantiq/xrx200/TDW8970: add ltq-ptm-vr9 to default packages   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq/xrx200/TDW8970: add ltq-ptm-vr9 to default packages   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: fix netdev setup in ltq-ptm-vdsl   Daniel Golle
• [OpenWrt-Devel] [PATCH] lantiq: ltq-ptm-{ar9, ase, xway}: fix alloc_netdev for 3.18   Daniel Golle
• [OpenWrt-Devel] [PATCH] lantiq: vr9-vdsl-fw: update w921v firmware version   Daniel Golle
• [OpenWrt-Devel] [PATCH] lantiq: vr9-vdsl-fw: update w921v firmware version   Daniel Golle
• [OpenWrt-Devel] [PATCH] lantiq: vr9-vdsl-fw: update w921v firmware version   John Crispin
• [OpenWrt-Devel] [PATCH] lantiq: vr9-vdsl-fw: update w921v firmware version   Daniel Golle
• [OpenWrt-Devel] [PATCH] lantiq add ptm-vr9 to default packages   Alexander Couzens
• [OpenWrt-Devel] [PATCH] linux: modules: crypto: adds ccm package   Varka Bhadram
• [OpenWrt-Devel] [PATCH] linux: modules: crypto: adds ccm package   Bryan Forbes
• [OpenWrt-Devel] [PATCH] lldpd: add Build/InstallDev rule   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] lldpd: add option to disable priviledge separation   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] lldpd: add support for 'readonly_mode'   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] lldpd: make LLDP-MED, DOT1 and DOT3 extensions disable-able   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] mac80211: Force Atheros drivers to respect the user's regdomain settings by default   bkil
• [OpenWrt-Devel] [PATCH] modules: package line echo canceller module   Daniel Golle
• [OpenWrt-Devel] [PATCH] mtd: fix md5sum error checking   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] netifd:Make sure interface device config is also cached   Hans Dedecker
• [OpenWrt-Devel] [PATCH] nls.mk: fix typo   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] octeon: Add MMC support for EdgeRouter ER8   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] octeon: Add MMC support for EdgeRouter ER8   John Crispin
• [OpenWrt-Devel] [PATCH] octeon: Add MMC support for EdgeRouter ER8   Jonathan Thibault
• [OpenWrt-Devel] [PATCH] octeon: Add MMC support for EdgeRouter ER8   John Crispin
• [OpenWrt-Devel] [PATCH] procd: check for empty parameters in askfirst   Zefir Kurtisi
• [OpenWrt-Devel] [PATCH] procd: Drop legacy json-c support   William Holland
• [OpenWrt-Devel] [PATCH] procd: Drop legacy json-c support   Karl Palsson
• [OpenWrt-Devel] [PATCH] procd: Use pkg-config to find json-c   William Holland
• [OpenWrt-Devel] [PATCH] procd: Use pkg-config to find json-c   Karl Palsson
• [OpenWrt-Devel] [PATCH] procd: Use pkg-config to find json-c   William Holland
• [OpenWrt-Devel] [PATCH] procd: Use pkg-config to find json-c   Yousong Zhou
• [OpenWrt-Devel] [PATCH] ralink: fix mt7621 i2c name   wengbj
• [OpenWrt-Devel] [PATCH] ralink: mt7621 add ECHI OCHI XCHI support   wengbj
• [OpenWrt-Devel] [PATCH] ralink: MT7621 add i2c controller driver   wengbj
• [OpenWrt-Devel] [PATCH] ralink: MT7621 add i2c controller driver   wengbj
• [OpenWrt-Devel] [PATCH] ralink: MT7621 add i2c controller driver   fl.service at t-firefly.com
• [OpenWrt-Devel] [PATCH] ralink: MT7621 add i2c controller driver   wengbj
• [OpenWrt-Devel] [PATCH] ralink: mt7621 fix pinctrl config   wengbj
• [OpenWrt-Devel] [PATCH] ralink: mt7621 fix pinctrl config   John Crispin
• [OpenWrt-Devel] [PATCH] ralink: resize the flash partition for FireWRT   wengbj
• [OpenWrt-Devel] [PATCH] ramips:Add support for ZTE Q7   郭传鈜
• [OpenWrt-Devel] [PATCH] ramips: Fix failsafe switch workaround for RT5350 introduced in r42179.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ramips: Fix failsafe switch workaround for RT5350 introduced in r42179.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: Fix failsafe switch workaround for RT5350 introduced in r42179.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] ramips: Fix failsafe switch workaround for RT5350 introduced in r42179.   John Crispin
• [OpenWrt-Devel] [PATCH] ramips: Fix failsafe switch workaround for RT5350 introduced in r42179.   Vittorio G (VittGam)
• [OpenWrt-Devel] [PATCH] rules.mk: add newline definition   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] rules.mk: add newline definition   John Crispin
• [OpenWrt-Devel] [PATCH] rules.mk: add newline definition   Alexandru Ardelean
• [OpenWrt-Devel] [PATCH] scripts: fix ubinize-image on OS X   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH] scripts: fix ubinize-image on OS X   John Crispin
• [OpenWrt-Devel] [PATCH] spi-ks8995: switch to upstream   Sergey Ryazanov
• [OpenWrt-Devel] [PATCH] syslog: use appropriate levels for logging   Christian Mehlis
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Jeff Waugh
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Jeff Waugh
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Jeff Waugh
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Jeff Waugh
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Jeff Waugh
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Felix Fietkau
• [OpenWrt-Devel] [PATCH] toolchain/uClibc: Add uClibc snapshot as selectable version   Jeff Waugh
• [OpenWrt-Devel] [PATCH] tools/e2fsprogs: add a darwin-compat patch   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] tools/e2fsprogs: add a darwin-compat patch   Felix Fietkau
• [OpenWrt-Devel] [PATCH] tools/e2fsprogs: add a darwin-compat patch   Lawrence D'Anna
• [OpenWrt-Devel] [PATCH] uClibc: fix syscall() for syscalls with 6 arguments on PowerPC   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] uClibc: fix syscall() for syscalls with 6 arguments on PowerPC   John Crispin
• [OpenWrt-Devel] [PATCH] update libnetfilter_conntrack to version 1.0.4   Christian Mehlis
• [OpenWrt-Devel] [PATCH] util-linux: fix pkgconfig files   Dirk Neukirchen
• [OpenWrt-Devel] [PATCH] util-linux: fix pkgconfig files   {Nico}
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   Russell Senior
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   John Crispin
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   Russell Senior
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   John Crispin
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   Russell Senior
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   John Crispin
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   Russell Senior
• [OpenWrt-Devel] [PATCH] x86: update to kernel 3.18   Felix Fietkau
• [OpenWrt-Devel] [PATCH] x86: use PARTUUID instead explicitly specifying the device by default   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] x86: use PARTUUID instead explicitly specifying the device by default   Felix Fietkau
• [OpenWrt-Devel] [PATCH] x86_64: fix PARTUUID format with leading zeros   Matthias Schiffer
• [OpenWrt-Devel] [PATCH] x86_64: fix PARTUUID format with leading zeros   Jo-Philipp Wich
• [OpenWrt-Devel] [PATCH RFC] brcm47xx: image: use standard KERNEL_IMAGE to avoid warnings   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2 0/3] uci: a few fixes.   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 1/2] brcm63xx: add bcm6328 LEDs driver   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 1/2] brcm63xx: add bcm6328 LEDs driver   Jonas Gorski
• [OpenWrt-Devel] [PATCH v2 1/3] hostapd: update hostapd to 2.4 release   Daniel Golle
• [OpenWrt-Devel] [PATCH v2 1/3] testenv: test for exit status of "uci export".   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 2/2] brcm63xx: add Comtrend VR-3032u support   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2 2/3] cli: fix return value of package_cmd().   Yousong Zhou
• [OpenWrt-Devel] [PATCH v2 2/3] hostapd: package wpad-mesh and wpa_supplicant-mesh variants   Daniel Golle
• [OpenWrt-Devel] [PATCH v2 3/3] lua: restore return value of require('uci') to module table.   Yousong Zhou
• [OpenWrt-Devel] [Patch v2] [dnsmasq] backport --tftp-no-fail to ignore missing tftp root   Stefan Tomanek
• [OpenWrt-Devel] [PATCH v2] [package] mwlwifi: generate TX_STATUS event on transmitting auth, associate, and reallocate responses   Pat Fruth
• [OpenWrt-Devel] [PATCH v2] [package] mwlwifi: generate TX_STATUS event on transmitting auth, associate, and reallocate responses   Ian Kent
• [OpenWrt-Devel] [PATCH v2] [package] mwlwifi: generate TX_STATUS event on transmitting auth, associate, and reallocate responses   Imre Kaloz
• [OpenWrt-Devel] [PATCH v2] ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC   Matthias Schiffer
• [OpenWrt-Devel] [PATCH V2] b53: define registers available and needed on BCM5301X   Rafał Miłecki
• [OpenWrt-Devel] [PATCH v2] dosfstools: switch back to release tarballs, update patches to the latest sent upstream   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2] kernel: add missing symbols to config and modules   Daniel Golle
• [OpenWrt-Devel] [PATCH v2] kernel: bump to 3.14.35, 3.18.9, 3.19.1 and 4.0-rc4   Daniel Golle
• [OpenWrt-Devel] [PATCH v2] kernel: enable open by fhandle syscalls   Daniel Golle
• [OpenWrt-Devel] [PATCH v2] scripts: fix ubinize-image on OS X   Álvaro Fernández Rojas
• [OpenWrt-Devel] [PATCH v2] x86: use PARTUUID instead explicitly specifying the device by default   Matthias Schiffer
• [OpenWrt-Devel] [PATCH V3] b53: define registers available and needed on BCM5301X   Rafał Miłecki
• [OpenWrt-Devel] [PATCH V3] b53: define registers available and needed on BCM5301X   Jonas Gorski
• [OpenWrt-Devel] [PATCH v3] x86: use PARTUUID instead explicitly specifying the device by default   Matthias Schiffer
• [OpenWrt-Devel] [PATCH v3] x86: use PARTUUID instead explicitly specifying the device by default   Jo-Philipp Wich
• [OpenWrt-Devel] [RFC] glibc 2.21 for OpenWrt   Jeff Waugh
• [OpenWrt-Devel] [RFC] glibc 2.21 for OpenWrt   Jeff Waugh
• [OpenWrt-Devel] [RFC] glibc 2.21 for OpenWrt   John Crispin
• [OpenWrt-Devel] [RFC] mac80211: update to wireless-testing 2015-03-09   Bryan Forbes
• [OpenWrt-Devel] [RFC] mac80211: update to wireless-testing 2015-03-09   Daniel Golle
• [OpenWrt-Devel] [RFC] mac80211: update to wireless-testing 2015-03-09   Bryan Forbes
• [OpenWrt-Devel] adding seccomp and service jailing to procd   John Crispin
• [OpenWrt-Devel] adding seccomp and service jailing to procd   Etienne Champetier
• [OpenWrt-Devel] adding seccomp and service jailing to procd   John Crispin
• [OpenWrt-Devel] adding seccomp and service jailing to procd   Etienne Champetier
• [OpenWrt-Devel] adding seccomp and service jailing to procd   Luka Perkov
• [OpenWrt-Devel] adding seccomp and service jailing to procd   John Crispin
• [OpenWrt-Devel] adding seccomp and service jailing to procd   Luka Perkov
• [OpenWrt-Devel] adding seccomp and service jailing to procd   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] Alfa Hornet-UB no longer supports OpenWrt?   Joshua Judson Rosen
• [OpenWrt-Devel] Automated Hotspot Testing Tool   Ronaldo Afonso
• [OpenWrt-Devel] Automated Hotspot Testing Tool   Roman Yeryomin
• [OpenWrt-Devel] BB14.07 - no auto build/update from source to download server   Christian Schoenebeck
• [OpenWrt-Devel] BB14.07 - no auto build/update from source to download server   John Crispin
• [OpenWrt-Devel] Building OpenWRT static kernels   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Building OpenWRT static kernels   Jonas Gorski
• [OpenWrt-Devel] Building OpenWRT static kernels   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Building OpenWRT static kernels   David Lang
• [OpenWrt-Devel] Building OpenWRT static kernels   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Building OpenWRT static kernels   David Lang
• [OpenWrt-Devel] CoovaChilli +opwrt ramips/mt7620a , kernel will penic   英德
• [OpenWrt-Devel] D-Link switches with GPL Linux kernel available   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] D-Link switches with GPL Linux kernel available   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] D-Link switches with GPL Linux kernel available   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] D-Link switches with GPL Linux kernel available   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Bjørn Mork
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Bjørn Mork
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Steven Barth
• [OpenWrt-Devel] DHCPv6 flash renumbering patches with HE tunnel breaks   Arjen de Korte
• [OpenWrt-Devel] directory completeness problems   Russell Senior
• [OpenWrt-Devel] drasko.draskovic at gmail.com has indicated you're a friend(19 mutual friends). Accept?   drasko.draskovic at gmail.com
• [OpenWrt-Devel] DS-Lite interface is not coming up.   Sekhar Avutu
• [OpenWrt-Devel] DS-Lite interface is not coming up.   Steven Barth
• [OpenWrt-Devel] DS-Lite interface is not coming up.   Sekhar Avutu
• [OpenWrt-Devel] DS-Lite interface is not coming up.   Steven Barth
• [OpenWrt-Devel] Dynamically generate custom files before building?   Nguyễn Hồng Quân
• [OpenWrt-Devel] Dynamically generate custom files before building?   Sami Olmari
• [OpenWrt-Devel] Dynamically generate custom files before building?   nam228
• [OpenWrt-Devel] Dynamically generate custom files before building?   Christian Schoenebeck
• [OpenWrt-Devel] Dynamically generate custom files before building?   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Dynamically generate custom files before building?   Nguyễn Hồng Quân
• [OpenWrt-Devel] Dynamically generate custom files before building?   Sami Olmari
• [OpenWrt-Devel] Dynamically generate custom files before building?   Nguyễn Hồng Quân
• [OpenWrt-Devel] Dynamically generate custom files before building?   Nguyễn Hồng Quân
• [OpenWrt-Devel] Dynamically generate custom files before building?   Joseph Marlin
• [OpenWrt-Devel] Dynamically generate custom files before building?   Sami Olmari
• [OpenWrt-Devel] Dynamically generate custom files before building?   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Dynamically generate custom files before building?   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Dynamically generate custom files before building?   Jo-Philipp Wich
• [OpenWrt-Devel] Dynamically generate custom files before building?   nam228
• [OpenWrt-Devel] e2fsprogs broken on ARM...   John Szakmeister
• [OpenWrt-Devel] e2fsprogs broken on ARM...   John Crispin
• [OpenWrt-Devel] e2fsprogs broken on ARM...   John Szakmeister
• [OpenWrt-Devel] e2fsprogs broken on ARM...   Roman Yeryomin
• [OpenWrt-Devel] EAP-TLS / EAP-TTLS PAP   Bernd Naumann
• [OpenWrt-Devel] EAP-TLS / EAP-TTLS PAP   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Ethernet problem with R8000   Ian Kent
• [OpenWrt-Devel] Ethernet problem with R8000   Conor O'Gorman
• [OpenWrt-Devel] Ethernet problem with R8000   Ian Kent
• [OpenWrt-Devel] Ethernet problem with R8000   Ian Kent
• [OpenWrt-Devel] Ext LNA patch for TUBE2H and HORNET-UB targets   Christophe Prévotaux
• [OpenWrt-Devel] Fwd: [Battlemesh] Announcing Battlemesh V8 Maribor, Slovenia   Simon Wunderlich
• [OpenWrt-Devel] FYI: [gentoo-announce] [ GLSA 201503-13 ] BusyBox: Multiple vulnerabilities   Daniel Golle
• [OpenWrt-Devel] FYI: [gentoo-announce] [ GLSA 201503-13 ] BusyBox: Multiple vulnerabilities   Felix Fietkau
• [OpenWrt-Devel] Guidance using @BUILD_NLS for full iconv support ?   Derek Werthmuller
• [OpenWrt-Devel] How to Custom admin page on openwrt ?   Tymon
• [OpenWrt-Devel] How to Custom admin page on openwrt ?   Claudio Thomas
• [OpenWrt-Devel] How to Custom admin page on openwrt ?   Claudio Thomas
• [OpenWrt-Devel] howto enable missing LEDs on archer-c5 in trunk   Christian Mehlis
• [OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1   Alex Henrie
• [OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1   Rafał Miłecki
• [OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1   Alex Henrie
• [OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1   Alex Henrie
• [OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1   Rafał Miłecki
• [OpenWrt-Devel] I'd like to donate a Linksys WRT300N V1   Alex Henrie
• [OpenWrt-Devel] ICONV & ICONV_SET_TRANSLITERATE issue in trying to port suricata to openwrt   Derek Werthmuller
• [OpenWrt-Devel] init scripts from files/etc/init.d/ are broken   Moritz Warning
• [OpenWrt-Devel] Interesting OpenWrt and Atheros job listing   valent.turkovic at gmail.com
• [OpenWrt-Devel] IPv6: network segmentation, use of vlan and IPsec   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] IPv6: network segmentation, use of vlan and IPsec   Charlie Smurthwaite
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   Yousong Zhou
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   Bastian Bittorf
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   Yousong Zhou
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   Ronaldo Afonso
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   Sebastian Moeller
• [OpenWrt-Devel] Is PPPoE broken in Barrier Breaker?   Michael Richardson
• [OpenWrt-Devel] json-c update   John Crispin
• [OpenWrt-Devel] json-c update   John Crispin
• [OpenWrt-Devel] json-c update   John Crispin
• [OpenWrt-Devel] json-c update   Karl Palsson
• [OpenWrt-Devel] Kind request to commit http://patchwork.ozlabs.org/patch/449868/   Janne Cederberg
• [OpenWrt-Devel] Kind request to commit http://patchwork.ozlabs.org/patch/449868/   John Crispin
• [OpenWrt-Devel] Lantiq 3.10 (BB) was lantiq v3.18   Daniel Gimpelevich
• [OpenWrt-Devel] LED Toggling for SATA   Deepanjan Kar
• [OpenWrt-Devel] LED Toggling for SATA   Daniel Golle
• [OpenWrt-Devel] LED Toggling for SATA   Deepanjan Kar
• [OpenWrt-Devel] LED Toggling for SATA   Deepanjan Kar
• [OpenWrt-Devel] MI424WR Rev I Hynix NAND Error   Conor O'Gorman
• [OpenWrt-Devel] MI424WR Rev I Hynix NAND Error   James Hilliard
• [OpenWrt-Devel] MI424WR Rev I Hynix NAND Error   Conor O'Gorman
• [OpenWrt-Devel] MI424WR Rev I Hynix NAND Error   Conor O'Gorman
• [OpenWrt-Devel] minimal work needed to build just the toolchain   Claudio Thomas
• [OpenWrt-Devel] minimal work needed to build just the toolchain   John Crispin
• [OpenWrt-Devel] minimal work needed to build just the toolchain   Claudio Thomas
• [OpenWrt-Devel] minimal work needed to build just the toolchain   Claudio Thomas
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Janne Cederberg
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Saverio Proto
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Outback Dingo
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   David Lang
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Bastian Bittorf
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   David Lang
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Janne Cederberg
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Arjen de Korte
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Bastian Bittorf
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   xxiao8
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   David Lang
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Outback Dingo
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Janne Cederberg
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   David Lang
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   David Lang
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Bastian Bittorf
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   Bastian Bittorf
• [OpenWrt-Devel] Multiple OpenWrt devices collectively managed?   David Lang
• [OpenWrt-Devel] openwrt dhcp question   英德
• [OpenWrt-Devel] OpenWRT reproducible build   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] OpenWRT reproducible build   Jo-Philipp Wich
• [OpenWrt-Devel] Patch to fix broken DHCP renewals with metric for AA   Joseph Marlin
• [OpenWrt-Devel] procd / crash of PID 1   Bastian Bittorf
• [OpenWrt-Devel] ptrace and pselect   Drasko DRASKOVIC
• [OpenWrt-Devel] ptrace and pselect   Karl Palsson
• [OpenWrt-Devel] Query serial number from device   Jakub Jančo
• [OpenWrt-Devel] Query serial number from device   bkil
• [OpenWrt-Devel] Question regarding UCI with IPv4 and IPv6 on lan-bridge   Christian Mehlis
• [OpenWrt-Devel] Question regarding UCI with IPv4 and IPv6 on lan-bridge   Steven Barth
• [OpenWrt-Devel] Question regarding UCI with IPv4 and IPv6 on lan-bridge   Christian Mehlis
• [OpenWrt-Devel] Ralink RT63365 support?   José Vázquez
• [OpenWrt-Devel] Re: "UCI overlay" proposal   David Lang
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Bastian Bittorf
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Yousong Zhou
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Bastian Bittorf
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Yousong Zhou
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Yousong Zhou
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Arjen de Korte
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jo-Philipp Wich
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Arjen de Korte
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Bastian Bittorf
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Felix Fietkau
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   John Szakmeister
• [OpenWrt-Devel] Rebuilding for specific hardware, example ar71xx/image for TP-Link TL-WR841ND   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)   Tymon
• [OpenWrt-Devel] reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)   Conor O'Gorman
• [OpenWrt-Devel] reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)   Tymon
• [OpenWrt-Devel] reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)   Tymon
• [OpenWrt-Devel] reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)   Tymon
• [OpenWrt-Devel] request review for my pull request   Xuefer
• [OpenWrt-Devel] seccomp patch lead to build failures   Dirk Neukirchen
• [OpenWrt-Devel] seccomp patch lead to build failures   John Crispin
• [OpenWrt-Devel] seccomp patch lead to build failures   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] seccomp patch lead to build failures   John Crispin
• [OpenWrt-Devel] seccomp patch lead to build failures   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] seccomp patch lead to build failures   John Crispin
• [OpenWrt-Devel] seccomp patch lead to build failures   Dirk Neukirchen
• [OpenWrt-Devel] Security Vulnerability Reporting and Database   Eric Schultz
• [OpenWrt-Devel] Security Vulnerability Reporting and Database   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Security Vulnerability Reporting and Database   Jo-Philipp Wich
• [OpenWrt-Devel] Squid: Configuring Intercept Mode   Ronaldo Afonso
• [OpenWrt-Devel] Status of X86_64 OpenWRT architecture   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Status of X86_64 OpenWRT architecture   Jo-Philipp Wich
• [OpenWrt-Devel] Status of X86_64 OpenWRT architecture   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] Status of X86_64 OpenWRT architecture   Jean-Michel Pouré - GOOZE
• [OpenWrt-Devel] swconfig: set pvid to the same value as vid for untagged ports?   Roman Yeryomin
• [OpenWrt-Devel] swconfig: set pvid to the same value as vid for untagged ports?   Roman Yeryomin
• [OpenWrt-Devel] synchronous network reload/restart   Bruno Randolf
• [OpenWrt-Devel] synchronous network reload/restart   Jo-Philipp Wich
• [OpenWrt-Devel] synchronous network reload/restart   Zefir Kurtisi
• [OpenWrt-Devel] synchronous network reload/restart   Bruno Randolf
• [OpenWrt-Devel] synchronous network reload/restart   Bruno Randolf
• [OpenWrt-Devel] System halted on bcm4708 series board when booting openwrt trunk (kernel 3.14)   Tymon
• [OpenWrt-Devel] System halted on bcm4708 series board when booting openwrt trunk (kernel 3.14)   Rafał Miłecki
• [OpenWrt-Devel] TEW-632BRP reboots on latest trunk with ipset enabled   Nikolay Martynov
• [OpenWrt-Devel] trunk: Ethernet LEDs not visible in Sysfs   Christian Mehlis
• [OpenWrt-Devel] Ubiquiti AirOS7 is based on openwrt r40432   Nemesis
• [OpenWrt-Devel] Ubiquiti AirOS7 is based on openwrt r40432   Bastian Bittorf
• [OpenWrt-Devel] Ubiquiti AirOS7 is based on openwrt r40432   Nemesis
• [OpenWrt-Devel] Ubiquiti AirOS7 is based on openwrt r40432   Bastian Bittorf
• [OpenWrt-Devel] Ubiquiti AirOS7 is based on openwrt r40432   Nemesis
• [OpenWrt-Devel] Ubiquiti AirOS7 is based on openwrt r40432   Stefan Rompf
• [OpenWrt-Devel] uci -P no longer working correctly   Mark Mentovai
• [OpenWrt-Devel] uci -P no longer working correctly   Yousong Zhou
• [OpenWrt-Devel] uci -P no longer working correctly   Yousong Zhou
• [OpenWrt-Devel] uci -P no longer working correctly   Bastian Bittorf
• [OpenWrt-Devel] uci -P no longer working correctly   Bastian Bittorf
• [OpenWrt-Devel] uci -P no longer working correctly   Mark Mentovai
• [OpenWrt-Devel] uci -P no longer working correctly   Bastian Bittorf
• [OpenWrt-Devel] UCI config bug or intent?   Dominik Taborsky
• [OpenWrt-Devel] Updating dnsmasq 2.73rc1 & new dnssec timestamp checking option   Kevin Darbyshire-Bryant
• [OpenWrt-Devel] What's happened to buildbot?   Gergely Kiss
• [OpenWrt-Devel] Why OpenWrt sucks?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why OpenWrt sucks?   Weedy
• [OpenWrt-Devel] Why OpenWrt sucks?   Charlie Smurthwaite
• [OpenWrt-Devel] Why OpenWrt sucks?   Fernando Frediani
• [OpenWrt-Devel] Why OpenWrt sucks?   Kathy Giori
• [OpenWrt-Devel] Why OpenWrt sucks?   John Clark
• [OpenWrt-Devel] Why OpenWrt sucks?   José Vázquez
• [OpenWrt-Devel] Why OpenWrt sucks?   David Lang
• [OpenWrt-Devel] Why OpenWrt sucks?   Michael Richardson
• [OpenWrt-Devel] Why OpenWrt sucks?   Alpha Sparc
• [OpenWrt-Devel] Why OpenWrt sucks?   Michael Richardson
• [OpenWrt-Devel] Why OpenWrt sucks?   Alpha Sparc
• [OpenWrt-Devel] Why OpenWrt sucks?   cmsv
• [OpenWrt-Devel] Why OpenWrt sucks?   Zefir Kurtisi
• [OpenWrt-Devel] Why OpenWrt sucks?   elektra
• [OpenWrt-Devel] Why OpenWrt sucks?   John Crispin
• [OpenWrt-Devel] Why OpenWrt sucks?   Jonas Gorski
• [OpenWrt-Devel] Why OpenWrt sucks?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why OpenWrt sucks?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why OpenWrt sucks?   John Clark
• [OpenWrt-Devel] Why OpenWrt sucks?   David Lang
• [OpenWrt-Devel] Why OpenWrt sucks?   Gergely Kiss
• [OpenWrt-Devel] Why OpenWrt sucks?   Fernando Frediani
• [OpenWrt-Devel] Why OpenWrt sucks?   Felix Fietkau
• [OpenWrt-Devel] Why OpenWrt sucks?   David Lang
• [OpenWrt-Devel] Why OpenWrt sucks?   Gergely Kiss
• [OpenWrt-Devel] Why OpenWrt sucks?   Zefir Kurtisi
• [OpenWrt-Devel] Why OpenWrt sucks?   Adam Kuklycz
• [OpenWrt-Devel] Why OpenWrt sucks?   John Clark
• [OpenWrt-Devel] Why OpenWrt sucks?   José Vázquez
• [OpenWrt-Devel] Why OpenWrt sucks?   valent.turkovic at gmail.com
• [OpenWrt-Devel] Why OpenWrt sucks?   Gergely Kiss
• [OpenWrt-Devel] Why OpenWrt sucks?   bkil
• [OpenWrt-Devel] x86 failing to build (including buildbot)   Luiz Angelo Daros de Luca
• [OpenWrt-Devel] Xilinx Zynq zedboard integration   Roman Yeryomin
• [OpenWrt-Devel] Xilinx Zynq zedboard integration   Javier Domingo Cansino
• [OpenWrt-Devel] Xilinx Zynq zedboard integration   Roman Yeryomin
• [OpenWrt-Devel] 回复： How to Custom admin page on openwrt ?   Tymon
• [OpenWrt-Devel] 回复： How to Custom admin page on openwrt ?   Ben Mulvihill
• [OpenWrt-Devel] 回复： How to Custom admin page on openwrt ?   Conor O'Gorman
• [OpenWrt-Devel] 回复： How toCustom admin page on openwrt ?   Tymon
• [OpenWrt-Devel] 回复： How toCustom admin page on openwrt ?   Ben Mulvihill

Last message date: Tue Mar 31 23:18:10 EDT 2015
Archived on: Thu Jun 25 05:56:08 EDT 2020

• Messages sorted by: [ thread ] [ author ] [ date ]
• More info on this list...