[OpenWrt-Devel] reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)
Tymon
banglang.huang at foxmail.com
Tue Mar 31 23:10:21 EDT 2015
There is a breakthrough, the xxx.trx file is not ok while the zImage-xxx.lzma can work.
But still remains lots of work to be done.
the target platform *.dts file should be like this:
/dts-v1/;
#include "bcm4708.dtsi"
/ {
compatible = "via,vnt5903", "brcm,bcm4708";
model = "VIA Networking Technology 5903 (BCM4708)";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
memory {
reg = <0x00000000 0x08000000
0x88000000 0x08000000>; /* 128MB + 128MB = 256MB */
};
chipcommonA {
uart0: serial at 0300 {
status = "okay";
};
uart1: serial at 0400 {
status = "okay";
};
};
};
below information is the log from zImage.xxxx.lzma:
u-boot> tftp 0x4000000 test.kernel
Using bcmiproc_eth-0 device
TFTP from server 192.168.1.100; our IP address is 192.168.1.199
Filename 'test.kernel'.
Load address: 0x4000000
Loading: #################################################################
#################################################################
#################################################################
##########################################################
done
Bytes transferred = 1294250 (13bfaa hex)
u-boot> boot_vmlinuz 0x4000000 0x13bfaa
Uncompressing from 4000000 to 8000 len 13bfaa ...
## Starting application at 0x00008000 ...
Uncompressing Linux...00000800 000386ea done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 3.14.32 (banglang at Ubuntu-Linux) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r44592) ) #64 SMP Tue Mar 31 19:03:29 HKT 2015
[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine model: VIA Networking Technology 5903 (BCM4708)
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] PERCPU: Embedded 7 pages/cpu @c6bd9000 s6848 r8192 d13632 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65280
[ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mtdblock2 rw rootfstype=squashfs,jffs2 earlyprintk
[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.000000] Memory: 255988K/262144K available (2630K kernel code, 99K rwdata, 724K rodata, 154K init, 234K bss, 6156K reserved, 131072K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xc8800000 - 0xff000000 ( 872 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xc8000000 ( 128 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0008000 - 0xc034edb4 (3356 kB)
[ 0.000000] .init : 0xc034f000 - 0xc0375ac0 ( 155 kB)
[ 0.000000] .data : 0xc0376000 - 0xc038eea0 ( 100 kB)
[ 0.000000] .bss : 0xc038eea0 - 0xc03c9984 ( 235 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000016] sched_clock: 64 bits at 500MHz, resolution 2ns, wraps every 2199023255552ns
[ 0.008406] Calibrating delay loop... 1987.37 BogoMIPS (lpj=9936896)
[ 0.071139] pid_max: default: 32768 minimum: 301
[ 0.076009] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.082768] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.090614] CPU: Testing write buffer coherency: ok
[ 0.095886] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.101729] Setting up static identity map for 0x124f0 - 0x12524
[ 0.109594] CPU1: failed to boot: -38
[ 0.113389] Brought up 1 CPUs
[ 0.116453] SMP: Total of 1 processors activated (1987.37 BogoMIPS).
[ 0.122947] CPU: All CPU(s) started in SVC mode.
[ 0.136212] NET: Registered protocol family 16
[ 0.141338] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.150445] L310 cache controller enabled
[ 0.154559] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x0a150000, Cache size: 512 kB
[ 0.168355] bio: create slab <bio-0> at 0
[ 0.173916] Switched to clocksource arm_global_timer
[ 0.180593] NET: Registered protocol family 2
[ 0.185610] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.192705] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
[ 0.199175] TCP: Hash tables configured (established 1024 bind 1024)
[ 0.205672] TCP: reno registered
[ 0.209005] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.214959] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.221513] NET: Registered protocol family 1
[ 0.227153] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.233945] bounce pool size: 64 pages
[ 0.237950] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.243909] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.253904] msgmni has been set to 243
[ 0.258698] io scheduler noop registered
[ 0.262721] io scheduler deadline registered (default)
[ 0.268329] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.275513] 18000300.serial: ttyS0 at MMIO 0x18000300 (irq = 117, base_baud = 6250000) is a 16550
[ messy code ]
[ ......messy code......]
[ ..................messy code ..................]
[ ..............................messy code ..............................]
[ ..........................................messy code ..........................................]
for more detail, refer to:
https://forum.openwrt.org/viewtopic.php?pid=270764#p270764
------------------ Original ------------------
From: "Tymon";<banglang.huang at foxmail.com>;
Send time: Tuesday, Mar 10, 2015 2:34 PM
To: "openwrt-devel"<openwrt-devel at lists.openwrt.org>;
Cc: "zajec5"<zajec5 at gmail.com>;
Subject: reply： System halted on bcm4708 series board when booting openwrt trunk(kernel 3.14)
On 10 March 2015 at 04:43, Tymon <banglang.huang at foxmail.com> wrote:
> my cpu is BCM958522ER which is the same series with 4708 as well, 32MB
> ###boot log: (I updated the xxx-squashfs.trx to the flash)
>
> Hit any key to stop autoboot: 0
> Checking TRX Image at addr 1e200000 ...
> Uncompressing ... Primary TRX image OK
> kernel args : console=ttyS0,115200 ubi.mtd=5 root=ubi0:rootfs ro
> rootflags=sync rootfstype=ubifs user_debug=31
> Booting from Primary Partition
> kernel_args console=ttyS0,115200 ubi.mtd=5 root=ubi0:rootfs ro
> rootflags=sync rootfstype=ubifs user_debug=31
> Start addr 00008000 machid 127f Parmameter addr 00100000 ...
>
> Starting kernel ...
> Uncompressing Linux...
>
> XZ-compressed data is corrupt
>
> -- System halted
>
> I want to know why this error arise, any hints will be appreciated.
but the "XZ-compressed data is corrupt" is the message of openwrt-trunk kernel that under linux-3.14.xx/lib/compress_unxz.c +371
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.infradead.org/pipermail/openwrt-devel/attachments/20150401/912b85a1/attachment.htm>
-------------- next part --------------
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel
More information about the openwrt-devel
mailing list