[OpenWrt-Devel] Ethernet problem with R8000

[Conor O'Gorman]

On 04/03/15 05:29, Ian Kent wrote:
> On Sat, 2015-02-28 at 23:07 +0800, Ian Kent wrote:
>> The only things I can say for sure are, packets sent are seen by the
>> bgmac driver and the driver gets a transmit completion interrupt which
>> it processes. However, no packets is seen coming from the router switch
>> port. Similarly no interrupts are seen by the driver for incoming
>> packets at all.

Can you access switch chip registers?

There may be counters in there, that will indicate if packets are making 
it that far, in or out. You may see counters indicating errors. You 
might be able to work out the arangement of ports from that info.
You may have to configure some of the switch registers to get the 
correct arrangement of the ports and/or vlan settings.

Conor
_______________________________________________
openwrt-devel mailing list
openwrt-devel at lists.openwrt.org
https://lists.openwrt.org/cgi-bin/mailman/listinfo/openwrt-devel